Add 2 helper functions to make the use of the auto-CMD23 flag more
readable.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NBaolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/20200412090349.1607-2-adrian.hunter@intel.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Patch all drivers which use mmc_regulator_set_vqmmc() and prepare them for
the fact that mmc_regulator_set_vqmmc() can return a value > 0, which would
happen if the signal voltage switch did NOT happen, because the voltage was
already set correctly.
Signed-off-by: NMarek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20200416163649.336967-1-marex@denx.de
[Ulf: Re-worked/simplified the code a bit]
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete
the shift macros and use GENMASK() for the touched macros.

Note that, this has the side-effect of changing the constants to 64-bit on
64-bit platforms.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200408072105.422-2-yamada.masahiro@socionext.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Use the FIELD_GET macro to get access to the register fields.
Delete the shift macros.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200312110050.21732-1-yamada.masahiro@socionext.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Some controllers diverge from the standard way of setting power and need
their bus voltage register to be configured regardless of the whether
they use regulators. As this is a common pattern across sdhci hosts,
create a helper function.
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200306174413.20634-2-nsaenzjulienne@suse.deSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Except SDHCI_QUIRK_BROKEN_CARD_DETECTION and MMC_CAP_NONREMOVABLE,
we also do not need to handle controller native card detect interrupt
for gpio cd type.
If we wrong enabled the card detect interrupt for gpio case, it will
cause a lot of unexpected card detect interrupts during data transfer
which should not happen.
Signed-off-by: NHaibo Chen <haibo.chen@nxp.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1582100563-20555-2-git-send-email-haibo.chen@nxp.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

When using the host software queue, it will trigger the next request in
irq handler without a context switch. But the sdhci_request() can not be
called in interrupt context when using host software queue for some host
drivers, due to the get_cd() ops can be sleepable.

But for some host drivers, such as Spreadtrum host driver, the card is
nonremovable, so the get_cd() ops is not sleepable, which means we can
complete the data request and trigger the next request in irq handler
to remove the context switch for the Spreadtrum host driver.

As suggested by Adrian, we should introduce a request_atomic() API to
indicate that a request can be called in interrupt context to remove
the context switch when using mmc host software queue. But this should
be done in another thread to convert the users of mmc host software queue.
Thus we can introduce a variable in struct sdhci_host to indicate that
we will always to defer to complete requests when using the host software
queue.
Suggested-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NBaolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/e693e7a29beb3c1922b333f4603ea81f43d5c5b1.1581478568.git.baolin.wang7@gmail.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Add request_done ops for struct sdhci_ops as a preparation in case some
host controllers have different method to complete one request, such as
supporting request completion of MMC software queue.
Suggested-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Signed-off-by: NBaolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1539c801c8bbdbcd1d86f8c2dab375f5803c765a.1581478568.git.baolin.wang7@gmail.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Let a vendor driver supply the maximum descriptor size that it
can operate on. ADMA descriptor table would be allocated using this
supplied size.
If any SD Host controller is of version prior to v4.10 spec
but supports 16byte descriptor, this change allows them to supply
correct descriptor size for ADMA table allocation.

Also let a vendor driver update the descriptor size by overriding
sdhc_host->desc_size if it has to operates on a different descriptor
sizes in different conditions.
Suggested-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NVeerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1579531122-28341-1-git-send-email-vbadigan@codeaurora.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Fix an issue reported by sparse, since mixed types of parameters are
used on calling dmaengine_prep_slave_sg().

Fixes: 36e1da441fec (mmc: sdhci: add support for using external DMA devices)
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200120033223.897-1-zhang.chunyan@linaro.orgSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:

mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]

The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode.

Fixes: c3ed3877 ("mmc: sdhci: add support for programmable clock mode")
Cc: <stable@vger.kernel.org> # 4f6aa326: mmc: tegra: Only advertise UHS modes if IO regulator is present
Cc: <stable@vger.kernel.org>
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.plSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Refactor sdhci_set_timeout() such that platform drivers can do some
functionality in a set_timeout() callback and then call
__sdhci_set_timeout() to complete the operation.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200116105154.7685-7-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Export sdhci_set_timeout_irq() so that it is accessible from platform drivers.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200116105154.7685-6-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Some standard SD host controllers can support both external dma
controllers as well as ADMA/SDMA in which the SD host controller
acts as DMA master. TI's omap controller is the case as an example.

Currently the generic SDHCI code supports ADMA/SDMA integrated in
the host controller but does not have any support for external DMA
controllers implemented using dmaengine, meaning that custom code is
needed for any systems that use an external DMA controller with SDHCI.

Fixes by Faiz Abbas <faiz_abbas@ti.com>:
1. Map scatterlists before dmaengine_prep_slave_sg()
2. Use dma_async() functions inside of the send_command() path and call
terminate_sync() in non-atomic context in case of an error.
Signed-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200116105154.7685-4-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In preparation for adding external dma support, factor out data initialization,
block info and mrq_done to their own functions.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Tested-by: NBaolin Wang <baolin.wang7@gmail.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200116105154.7685-3-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.

This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.

Fixes: 8ee82bda ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.

Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The STOP command is disabled for multiple blocks r/w commands
with auto CMD12, when start to send. However, if there is data
error, software still needs to send CMD12 according to SD spec.
This patch is to allow software CMD12 sending for this case.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20191114111814.35199-1-yangbo.lu@nxp.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.

Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This reverts commit c894e33d.

This commit aims to treat SD High speed and SDR25 as the same while
setting UHS Timings in HOST_CONTROL2 which leads to failures with some
SD cards in AM65x. Revert this commit.

The issue this commit was trying to fix can be implemented in a platform
specific callback instead of common sdhci code.

Cc: <stable@vger.kernel.org>
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The correct form is "did not become", so fix it accordingly.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In sdhci_do_reset we call the reset callback which is typically
sdhci_reset. sdhci_reset can wait for up to 100ms waiting for the
controller to reset. If SDHCI_RESET_ALL was passed as the flag, the
controller will clear the IRQ mask. If during that 100ms the card is
removed there is no notification to the MMC system that the card was
removed. So from the drivers point of view the card is always present.

By making sdhci_reinit compare the present state it can schedule a
rescan if the card was removed while a reset was in progress.
Signed-off-by: NRaul E Rangel <rrangel@chromium.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Add host operation ->set_dma_mask() so that drivers can define their own
DMA masks.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org # v4.15 +
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

ADMA errors are potentially data corrupting events; although we print
the register state, we do not usefully print the ADMA descriptors.
Worse than that, we print them by referencing their virtual address
which is meaningless when the register state gives us the DMA address
of the failing descriptor.

Print the ADMA descriptors giving their DMA addresses rather than their
virtual addresses, and print them using SDHCI_DUMP() rather than DBG().

We also do not show the correct value of the interrupt status register;
the register dump shows the current value, after we have cleared the
pending interrupts we are going to service.  What is more useful is to
print the interrupts that _were_ pending at the time the ADMA error was
encountered.  Fix that too.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Instead of keeping track of whether SDIO IRQs have been enabled via an
internal sdhci status flag, avoid the open-coding and convert into using
sdio_irq_claimed().
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Nowadays sdhci prevents runtime suspend when SDIO IRQs are enabled.

However, some variants such as sdhci-esdhc-imx's, tries to allow runtime
suspend while having the SDIO IRQs enabled, but without supporting remote
wakeups. This support is a bit questionable, especially if the host device
have a PM domain attached that can be power gated, but more importantly,
the code have also become redundant (which was not the case when it was
introduced).

Rather than keeping the redundant code around, let's drop it and leave this
to be revisited later on.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The sdhci_ack_sdio_irq() is called only when SDIO IRQs are enabled.
Therefore, let's drop the redundant check of the internal
SDHCI_SDIO_IRQ_ENABLED flag and just re-enable the IRQs immediately.
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

When switching from any MMC speed mode that requires 1.8v
(HS200, HS400 and HS400ES) to High Speed (HS) mode, the system
ends up configured for SDR12 with a 50MHz clock which is an illegal
mode.

This happens because the SDHCI_CTRL_VDD_180 bit in the
SDHCI_HOST_CONTROL2 register is left set and when this bit is
set, the speed mode is controlled by the SDHCI_CTRL_UHS field
in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field
will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling()
because there is no UHS mode being set.

The fix is to change sdhci_set_uhs_signaling() to set the
SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for
any switch to HS mode.

This was found on a new eMMC controller that does strict checking
of the speed mode and the corresponding clock rate. It caused the
switch to HS400 mode to fail because part of the sequence to switch
to HS400 requires a switch from HS200 to HS before going to HS400.
Suggested-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NAl Cooper <alcooperx@gmail.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Currently, the DMA addresses are casted to (u64) for the upper 32bits
to avoid "right shift count >= width of type" warning.

<linux/kernel.h> provides macros to address this, and I like the macro
names are self-documenting.

I introduced a new helper, sdhci_set_adma_addr() to avoid the code
duplication.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

__sdhci_read_caps() does not modify *ver, *caps, or *caps1.

Probably, the caller of this function will want to constifythe
parameters passed in.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Export sdhci_abort_tuning() function symbols which are used by other SD Host
controller driver modules.
Signed-off-by: NBen Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: NMichael K Johnson <johnsonm@danlj.org>
Signed-off-by: NMichael K Johnson <johnsonm@danlj.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
setup as part of the internal clock setup as described in 3.2.1 Internal
Clock Setup Sequence of SD Host Controller Simplified Specification
Version 4.20.
Signed-off-by: NBen Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: NMichael K Johnson <johnsonm@danlj.org>
Signed-off-by: NMichael K Johnson <johnsonm@danlj.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

According to section 3.2.1 internal clock setup in SD Host Controller
Simplified Specifications 4.20, the timeout of loop for checking
internal clock stable is defined as 150ms.
Signed-off-by: NBen Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: NMichael K Johnson <johnsonm@danlj.org>
Signed-off-by: NMichael K Johnson <johnsonm@danlj.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The SD host controller specification defines 3 types software reset:
software reset for data line, software reset for command line and software
reset for all. Software reset for all means this reset affects the entire
Host controller except for the card detection circuit.

In sdhci_runtime_resume_host() we always do a software "reset for all",
which causes the Spreadtrum variant controller to work abnormally after
resuming. To fix the problem, let's do a software reset for the data and
the command part, rather than "for all".

However, as sdhci_runtime_resume() is a common sdhci function and we don't
want to change the behaviour for other variants, let's introduce a new
in-parameter for it. This enables the caller to decide if a "reset for all"
shall be done or not.
Signed-off-by: NBaolin Wang <baolin.wang@linaro.org>
Fixes: fb8bd90f ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Cc: stable@vger.kernel.org
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit c07a48c2 ("mmc: sdhci: Remove finish_tasklet"), the IRQ
thread might be used to complete requests, but the IRQ thread is also used
to process SDIO card interrupts. This can cause a deadlock when the SDIO
processing tries to access the card since that would also require the IRQ
thread. Change SDHCI to use sdio_signal_irq() to schedule a work item
instead. That also requires implementing the ->ack_sdio_irq() mmc host op.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Fixes: c07a48c2 ("mmc: sdhci: Remove finish_tasklet")
Reported-by: NBrian Masney <masneyb@onstation.org>
Tested-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Remove finish_tasklet. Requests that require DMA-unmapping or sdhci_reset
are completed either in the IRQ thread or a workqueue if the completion is
not initiated by the IRQ.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In preparation for removing finish_tasklet, call mmc_request_done() from
the IRQ handler if possible. That will alleviate the potential loss of
performance from shifting away from finish_tasklet.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In preparation for removing finish_tasklet, move some processing from
sdhci_request_done() to __sdhci_finish_mrq().
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In preparation for removing finish_tasklet, move some functions.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>