mmc: sdhci: Add PLL Enable support to internal clock setup

The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
setup as part of the internal clock setup as described in 3.2.1 Internal
Clock Setup Sequence of SD Host Controller Simplified Specification
Version 4.20.
Signed-off-by: NBen Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: NMichael K Johnson <johnsonm@danlj.org>
Signed-off-by: NMichael K Johnson <johnsonm@danlj.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci.c

@@ -1653,6 +1653,29 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 		udelay(10);
 	}
 
+	if (host->version >= SDHCI_SPEC_410 && host->v4_mode) {
+		clk |= SDHCI_CLOCK_PLL_EN;
+		clk &= ~SDHCI_CLOCK_INT_STABLE;
+		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+		/* Wait max 150 ms */
+		timeout = ktime_add_ms(ktime_get(), 150);
+		while (1) {
+			bool timedout = ktime_after(ktime_get(), timeout);
+
+			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+			if (clk & SDHCI_CLOCK_INT_STABLE)
+				break;
+			if (timedout) {
+				pr_err("%s: PLL clock never stabilised.\n",
+				       mmc_hostname(host->mmc));
+				sdhci_dumpregs(host);
+				return;
+			}
+			udelay(10);
+		}
+	}
+
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 }

drivers/mmc/host/sdhci.h

@@ -114,6 +114,7 @@
 #define  SDHCI_DIV_HI_MASK	0x300
 #define  SDHCI_PROG_CLOCK_MODE	0x0020
 #define  SDHCI_CLOCK_CARD_EN	0x0004
+#define  SDHCI_CLOCK_PLL_EN	0x0008
 #define  SDHCI_CLOCK_INT_STABLE	0x0002
 #define  SDHCI_CLOCK_INT_EN	0x0001