This is needed for proper PCI-E support on P1021 SoCs.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move the VENDOR/DEVICE ids to pci_ids.h.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds the quirk for PCIE controller found on Freescale MPC8308.
The quirk is the same as for other MPC83xx processors.
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

SBE 2T3E3 cards use DECchips 21143 but they need a different driver.
Don't even try to use a normal tulip driver with them.
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These devices were never released to the public.
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for JMB364 and 369.

Patch-originally-from: Aries Lee <arieslee@jmicron.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add the xen pci platform device driver that is responsible
for initializing the grant table and xenbus in PV on HVM mode.
Few changes to xenbus and grant table are necessary to allow the delayed
initialization in HVM mode.
Grant table needs few additional modifications to work in HVM mode.

The Xen PCI platform device raises an irq every time an event has been
delivered to us. However these interrupts are only delivered to vcpu 0.
The Xen PCI platform interrupt handler calls xen_hvm_evtchn_do_upcall
that is a little wrapper around __xen_evtchn_do_upcall, the traditional
Xen upcall handler, the very same used with traditional PV guests.

When running on HVM the event channel upcall is never called while in
progress because it is a normal Linux irq handler (and we cannot switch
the irq chip wholesale to the Xen PV ones as we are running QEMU and
might have passed in PCI devices), therefore we cannot be sure that
evtchn_upcall_pending is 0 when returning.
For this reason if evtchn_upcall_pending is set by Xen we need to loop
again on the event channels set pending otherwise we might loose some
event channel deliveries.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under
linux but the controller doesn't require explicit mode setting and
works fine with ata_generic.  Make ahci ignore the controller on MBP
7,1 and let ata_generic take it for now.

Reported in bko#15923.

  https://bugzilla.kernel.org/show_bug.cgi?id=15923

NVIDIA is investigating why ahci mode doesn't work.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Cc: stable@kernel.org
Reported-by: NAnders Østhus <grapz666@gmail.com>
Reported-by: NAndreas Graf <andreas_graf@csgraf.de>
Reported-by: NBenoit Gschwind <gschwind@gnu-log.net>
Reported-by: NDamien Cassou <damien.cassou@gmail.com>
Reported-by: tixetsal@juno.com
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

JMB362 is a new variant of jmicron controller which is similar to
JMB360 but has two SATA ports instead of one.  As there is no PATA
port, single function AHCI mode can be used as in JMB360.  Add pci
quirk for JMB362.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NAries Lee <arieslee@jmicron.com>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This adds new PCI IDs for the Westmere's memory controller
devices and modifies the i7core_edac driver to be able to
probe both Nehalem and Westmere processors.
Signed-off-by: NVernon Mauery <vernux@us.ibm.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by Vernon Mauery <vernux@us.ibm.com>, X5670 (Westmere-EP) uses a
different register for one of the uncore PCI devices. Add support for
it.

Those are the PCI ID's on this new chipset:

fe:00.0 0600: 8086:2c70 (rev 02)
fe:00.1 0600: 8086:2d81 (rev 02)
fe:02.0 0600: 8086:2d90 (rev 02)
fe:02.1 0600: 8086:2d91 (rev 02)
fe:02.2 0600: 8086:2d92 (rev 02)
fe:02.3 0600: 8086:2d93 (rev 02)
fe:02.4 0600: 8086:2d94 (rev 02)
fe:02.5 0600: 8086:2d95 (rev 02)
fe:03.0 0600: 8086:2d98 (rev 02)
fe:03.1 0600: 8086:2d99 (rev 02)
fe:03.2 0600: 8086:2d9a (rev 02)
fe:03.4 0600: 8086:2d9c (rev 02)
fe:04.0 0600: 8086:2da0 (rev 02)
fe:04.1 0600: 8086:2da1 (rev 02)
fe:04.2 0600: 8086:2da2 (rev 02)
fe:04.3 0600: 8086:2da3 (rev 02)
fe:05.0 0600: 8086:2da8 (rev 02)
fe:05.1 0600: 8086:2da9 (rev 02)
fe:05.2 0600: 8086:2daa (rev 02)
fe:05.3 0600: 8086:2dab (rev 02)
fe:06.0 0600: 8086:2db0 (rev 02)
fe:06.1 0600: 8086:2db1 (rev 02)
fe:06.2 0600: 8086:2db2 (rev 02)
fe:06.3 0600: 8086:2db3 (rev 02)
(as usual, the same PCI devices repeat at ff: bus)

The PCI device 8086:2c70 is shown as:

fe:00.0 Host bridge: Intel Corporation QuickPath Architecture Generic
Non-core Registers (rev 02)

So, for this device to be recognized, it is only a matter of adding this
new PCI ID to the driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds additional LPC Controller DeviceIDs for the Intel Cougar
Point PCH.

The DeviceIDs are defined and referenced as a range of values, the same
way Ibex Peak was implemented.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Xeon55xx fails to probe with this error message:

EDAC DEBUG: in drivers/edac/i7core_edac.c, line at 1660: MC: drivers/edac/i7core_edac.c: i7core_init()
EDAC i7core: Device not found: dev 00:00.0 PCI ID 8086:2c41
i7core_edac: probe of 0000:00:14.0 failed with error -22

This is due to the fact that, on Xeon35xx (and i7core), device 00.0 has
PCI ID 8086:2c40.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This code changes the detection procedure of i7core_edac. Instead of
directly probing for MC registers, it probes for another register found
on Nehalem. If found, it tries to pick the first MC PCI BUS. This should
work fine with Xeon 35xx, but, on Xeon 55xx, this is at bus 254 and 255
that are not properly detected by the non-legacy PCI methods.

The new detection code scans specifically at buses 254 and 255 for the
Xeon 55xx devices.

This code has not tested yet. After working, a change at the code will
be needed, since the i7core is not yet ready for working with 2 sets of
MC.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The public Intel Xeon 5500 volume 2 datasheet describes, on page 53,
session 2.6.7 a register that can lock/unlock Memory Controller the
configuration register, called MC_CFG_CONTROL.

Adds support for it in the hope that software error injection would
work. With my tests with Xeon 35xx, there's still something missing.
With a program that does sequencial bit writes at dev 0.0, sometimes, it
produces error injection, after unblocking the MC_CFG_CONTROL (and,
sometimes, it just locks my testing machine).

I'll try later to discover by trial and error what's the register that
solves this issue on Xeon 35xx.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This driver is meant to support i7 core/i7core extreme desktop
processors and Xeon 35xx/55xx series with integrated memory controller.
It is likely that it can be expanded in the future to work with other
processor series based at the same Memory Controller design.

For now, it has just a few MCH status reads.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add different model (with a different PCI ID) to support Korenix JetCard.
Signed-off-by: NKiros Yeh <kiros@korenix.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is heavily based on an earlier patch found on the linux-serial
mailing list [1], written by Darius Augulis.

The previous incarnation of this patch only supported a 2x serial port
card.  I have added support for my SYBA 6x serial port card, and tested on
x86.

[1]: http://marc.info/?l=linux-serial&m=124975806304760Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This code was no longer used since 2.6.33, "firewire: ohci: always use
packet-per-buffer mode for isochronous reception" commit 090699c0.  If
anybody needs this code in the future for special purposes, it can be
brought back in.  But it must not be re-enabled by default; drivers
(kernelspace or userspace drivers) should only get this mode if they
explicitly request it.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.
Signed-off-by: NJack Wang <jack_wang@usish.com>
Signed-off-by: NLindar Liu <lindar_liu@usish.com>
Signed-off-by: NTom Peng <tom_peng@usish.com>
Signed-off-by: NKevin Ao <aoqingyun@usish.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

We were never able to get docs for this out of Toshiba for years. Dave
Barnes produced a NetBSD driver however and from that we can fill in the
needed tables.

As we correct the PCI identifiers a bit also update the old ide generic driver
at the same time so it stays compiling.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This seems to be a different model (with a different PCI ID) than the
"Quatro" card that is also in the list.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change SB900 to its formal code name Hudson-2.
Signed-off-by: NCrane Cai <crane.cai@amd.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The IBM Saturn serial card has only one port. Without that fixup,
the kernel thinks it has two, which confuses userland setup and
admin tools as well.

[akpm@linux-foundation.org: fix pci-ids.h layout]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Cc: Michael Reed <mreed10@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for ADDI-DATA GmbH PCI-Express communication cards:

APCIe-7300
APCIe-7420
APCIe-7500
APCIe-7800

Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c
Signed-off-by: NKrauth Julien <Krauth.Julien@addi-data.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Out of 10 PCI_IDs found in the PCMCIA subsystem, only two were not defined in
pci_ids.h. Move them and drop the duplicates. Successfully build-tested.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This patch renames the code name SB900 into Hudson-2
Signed-off-by: NShane Huang <shane.huang@amd.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This quirk will disable fast back to back transfer on the secondary bus
segment of the TI Bridge.
Signed-off-by: NGabe Black <gabe.black@ni.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Add new SMBus device ID for AMD SB900.
Signed-off-by: NCrane Cai <crane.cai@amd.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls.
Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes
from Eric Uhrhane <ericu@google.com>.
Signed-off-by: NJohn(Jung-Ik) Lee <jilee@google.com>
Reviewed-by: NGrant Grundler <grundler@google.com>
Reviewed-by: NGwendal Gringo <gwendal@google.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add AMD SB900 SATA/IDE controller device IDs.
Signed-off-by: NShane Huang <shane.huang@amd.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

IDs should generally only be added to pci_ids.h when they're shared
across several files in the tree.  IDs that are just used by a single
driver should be defined in the driver instead.

Perhaps documenting this is a good idea to prevent things being moved there,
as it still seems to be happening judging from the git log.

(based on discussion w/gregkh and others).
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Jasper Forest introduces raid offload support via ioat3.2 support.  When
raid offload is enabled two (out of 8 channels) will report raid5/raid6
offload capabilities.  The remaining channels will only report ioat3.0
capabilities (memcpy).
Signed-off-by: NTom Picard <tom.s.picard@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5
with the U4 bridge (latest generations, may also affect the iMac G5
"iSight") is causing us to re-assign the PCI BARs of the video card,
which can get it out of sync with the firmware, thus breaking offb.

This works around it by fixing up the bridge configuration properly
at boot time. It also fixes a bug where the firmware provides us with
an incorrect set of accessible regions in the device-tree.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>