Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 6498ba04 编写于 作者: S Stefan Richter
浏览文件
操作

firewire: ohci: remove unused dualbuffer IR code 

This code was no longer used since 2.6.33, "firewire: ohci: always use
packet-per-buffer mode for isochronous reception" commit 090699c0.  If
anybody needs this code in the future for special purposes, it can be
brought back in.  But it must not be re-enabled by default; drivers
(kernelspace or userspace drivers) should only get this mode if they
explicitly request it.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
上级 64582298
隐藏空白更改
内联 并排
Showing with 1 addition and 184 deletion
drivers/firewire/ohci.c
浏览文件 @ 6498ba04
......@@ -72,20 +72,6 @@ struct descriptor {
__le16 transfer_status;
} __attribute__((aligned(16)));
struct db_descriptor {
__le16 first_size;
__le16 control;
__le16 second_req_count;
__le16 first_req_count;
__le32 branch_address;
__le16 second_res_count;
__le16 first_res_count;
__le32 reserved0;
__le32 first_buffer;
__le32 second_buffer;
__le32 reserved1;
} __attribute__((aligned(16)));
#define CONTROL_SET(regs) (regs)
#define CONTROL_CLEAR(regs) ((regs) + 4)
#define COMMAND_PTR(regs) ((regs) + 12)
......@@ -187,7 +173,6 @@ struct fw_ohci {
int generation;
int request_generation; /* for timestamping incoming requests */
bool use_dualbuffer;
bool old_uninorth;
bool bus_reset_packet_quirk;
bool iso_cycle_timer_quirk;
......@@ -1863,52 +1848,6 @@ static void copy_iso_headers(struct iso_context *ctx, void *p)
ctx->header_length += ctx->base.header_size;
}
static int handle_ir_dualbuffer_packet(struct context *context,
struct descriptor *d,
struct descriptor *last)
{
struct iso_context *ctx =
container_of(context, struct iso_context, context);
struct db_descriptor *db = (struct db_descriptor *) d;
__le32 *ir_header;
size_t header_length;
void *p, *end;
if (db->first_res_count != 0 && db->second_res_count != 0) {
if (ctx->excess_bytes <= le16_to_cpu(db->second_req_count)) {
/* This descriptor isn't done yet, stop iteration. */
return 0;
}
ctx->excess_bytes -= le16_to_cpu(db->second_req_count);
}
header_length = le16_to_cpu(db->first_req_count) -
le16_to_cpu(db->first_res_count);
p = db + 1;
end = p + header_length;
while (p < end) {
copy_iso_headers(ctx, p);
ctx->excess_bytes +=
(le32_to_cpu(*(__le32 *)(p + 4)) >> 16) & 0xffff;
p += max(ctx->base.header_size, (size_t)8);
}
ctx->excess_bytes -= le16_to_cpu(db->second_req_count) -
le16_to_cpu(db->second_res_count);
if (le16_to_cpu(db->control) & DESCRIPTOR_IRQ_ALWAYS) {
ir_header = (__le32 *) (db + 1);
ctx->base.callback(&ctx->base,
le32_to_cpu(ir_header[0]) & 0xffff,
ctx->header_length, ctx->header,
ctx->base.callback_data);
ctx->header_length = 0;
}
return 1;
}
static int handle_ir_packet_per_buffer(struct context *context,
struct descriptor *d,
struct descriptor *last)
......@@ -1995,10 +1934,7 @@ static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card,
channels = &ohci->ir_context_channels;
mask = &ohci->ir_context_mask;
list = ohci->ir_context_list;
if (ohci->use_dualbuffer)
callback = handle_ir_dualbuffer_packet;
else
callback = handle_ir_packet_per_buffer;
callback = handle_ir_packet_per_buffer;
}
spin_lock_irqsave(&ohci->lock, flags);
......@@ -2061,8 +1997,6 @@ static int ohci_start_iso(struct fw_iso_context *base,
} else {
index = ctx - ohci->ir_context_list;
control = IR_CONTEXT_ISOCH_HEADER;
if (ohci->use_dualbuffer)
control |= IR_CONTEXT_DUAL_BUFFER_MODE;
match = (tags << 28) | (sync << 8) | ctx->base.channel;
if (cycle >= 0) {
match |= (cycle & 0x07fff) << 12;
......@@ -2223,92 +2157,6 @@ static int ohci_queue_iso_transmit(struct fw_iso_context *base,
return 0;
}
static int ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base,
struct fw_iso_packet *packet,
struct fw_iso_buffer *buffer,
unsigned long payload)
{
struct iso_context *ctx = container_of(base, struct iso_context, base);
struct db_descriptor *db = NULL;
struct descriptor *d;
struct fw_iso_packet *p;
dma_addr_t d_bus, page_bus;
u32 z, header_z, length, rest;
int page, offset, packet_count, header_size;
/*
* FIXME: Cycle lost behavior should be configurable: lose
* packet, retransmit or terminate..
*/
p = packet;
z = 2;
/*
* The OHCI controller puts the isochronous header and trailer in the
* buffer, so we need at least 8 bytes.
*/
packet_count = p->header_length / ctx->base.header_size;
header_size = packet_count * max(ctx->base.header_size, (size_t)8);
/* Get header size in number of descriptors. */
header_z = DIV_ROUND_UP(header_size, sizeof(*d));
page = payload >> PAGE_SHIFT;
offset = payload & ~PAGE_MASK;
rest = p->payload_length;
/*
* The controllers I've tested have not worked correctly when
* second_req_count is zero. Rather than do something we know won't
* work, return an error
*/
if (rest == 0)
return -EINVAL;
while (rest > 0) {
d = context_get_descriptors(&ctx->context,
z + header_z, &d_bus);
if (d == NULL)
return -ENOMEM;
db = (struct db_descriptor *) d;
db->control = cpu_to_le16(DESCRIPTOR_STATUS |
DESCRIPTOR_BRANCH_ALWAYS);
db->first_size =
cpu_to_le16(max(ctx->base.header_size, (size_t)8));
if (p->skip && rest == p->payload_length) {
db->control |= cpu_to_le16(DESCRIPTOR_WAIT);
db->first_req_count = db->first_size;
} else {
db->first_req_count = cpu_to_le16(header_size);
}
db->first_res_count = db->first_req_count;
db->first_buffer = cpu_to_le32(d_bus + sizeof(*db));
if (p->skip && rest == p->payload_length)
length = 4;
else if (offset + rest < PAGE_SIZE)
length = rest;
else
length = PAGE_SIZE - offset;
db->second_req_count = cpu_to_le16(length);
db->second_res_count = db->second_req_count;
page_bus = page_private(buffer->pages[page]);
db->second_buffer = cpu_to_le32(page_bus + offset);
if (p->interrupt && length == rest)
db->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
context_append(&ctx->context, d, z, header_z);
offset = (offset + length) & ~PAGE_MASK;
rest -= length;
if (offset == 0)
page++;
}
return 0;
}
static int ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
struct fw_iso_packet *packet,
struct fw_iso_buffer *buffer,
......@@ -2399,9 +2247,6 @@ static int ohci_queue_iso(struct fw_iso_context *base,
spin_lock_irqsave(&ctx->context.ohci->lock, flags);
if (base->type == FW_ISO_CONTEXT_TRANSMIT)
ret = ohci_queue_iso_transmit(base, packet, buffer, payload);
else if (ctx->context.ohci->use_dualbuffer)
ret = ohci_queue_iso_receive_dualbuffer(base, packet,
buffer, payload);
else
ret = ohci_queue_iso_receive_packet_per_buffer(base, packet,
buffer, payload);
......@@ -2456,10 +2301,6 @@ static void ohci_pmac_off(struct pci_dev *dev)
#define ohci_pmac_off(dev)
#endif /* CONFIG_PPC_PMAC */
#define PCI_VENDOR_ID_AGERE PCI_VENDOR_ID_ATT
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_TI_TSB43AB23 0x8024
static int __devinit pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
......@@ -2508,29 +2349,6 @@ static int __devinit pci_probe(struct pci_dev *dev,
}
version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
#if 0
/* FIXME: make it a context option or remove dual-buffer mode */
ohci->use_dualbuffer = version >= OHCI_VERSION_1_1;
#endif
/* dual-buffer mode is broken if more than one IR context is active */
if (dev->vendor == PCI_VENDOR_ID_AGERE &&
dev->device == PCI_DEVICE_ID_AGERE_FW643)
ohci->use_dualbuffer = false;
/* dual-buffer mode is broken */
if (dev->vendor == PCI_VENDOR_ID_RICOH &&
dev->device == PCI_DEVICE_ID_RICOH_R5C832)
ohci->use_dualbuffer = false;
/* x86-32 currently doesn't use highmem for dma_alloc_coherent */
#if !defined(CONFIG_X86_32)
/* dual-buffer mode is broken with descriptor addresses above 2G */
if (dev->vendor == PCI_VENDOR_ID_TI &&
(dev->device == PCI_DEVICE_ID_TI_TSB43AB22 ||
dev->device == PCI_DEVICE_ID_TI_TSB43AB23))
ohci->use_dualbuffer = false;
#endif
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE &&
......
include/linux/pci_ids.h
浏览文件 @ 6498ba04
......@@ -770,7 +770,6 @@
#define PCI_VENDOR_ID_TI 0x104c
#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
#define PCI_DEVICE_ID_TI_4450 0x8011
#define PCI_DEVICE_ID_TI_TSB43AB22 0x8023
#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031
#define PCI_DEVICE_ID_TI_XX21_XX11_FM 0x8033
#define PCI_DEVICE_ID_TI_XX21_XX11_SD 0x8034
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或