The main differences compared to the MSCAN on the MPC5200 are:

- More flexibility in choosing the CAN source clock and frequency:

  Three different clock sources can be selected: "ip", "ref" or "sys".
  For the latter two, a clock divider can be defined as well. If the
  clock source is not specified by the device tree, we first try to
  find an optimal CAN source clock based on the system clock. If that
  is not possible, the reference clock will be used.

- The behavior of bus-off recovery is configurable:

  To comply with the usual handling of Socket-CAN bus-off recovery,
  "recovery on request" is selected (instead of automatic recovery).

Note that only MPC5121 Rev. 2 and later is supported.
Signed-off-by: NWolfgang Grandegger <wg@denx.de>
Reviewed-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The start_xmit function of the MSCAN Driver did return improperly if
the CAN dlc check failed (skb not freed and invalid return code). This
patch adds a proper check of the frame lenght and data size and returns
now correctly. The invalid skb packets are dropped silently as suggested
by David Miller in the thread "[RFC] ndo_validate_skb: Let the netdev
check a valid skb content" on the netdev mailing list.

Furthermore, a typo has been fixed.
Signed-off-by: NWolfgang Grandegger <wg@denx.de>
Reviewed-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use "[compressed ipv6]:port" form suggested by:
http://tools.ietf.org/id/draft-ietf-6man-text-addr-representation-03.txtSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

General cleanup of the ep93xx_eth driver.

1) Use pr_fmt() to prefix the module name and __func__ to the error 
   messages.
2) <linux/io.h> instead of <asm/io.h>
3) <mach/hardware.h> instead of <mach/ep93xx-regs.h> and <mach/platform.h>
4) Move the ep93xx_mdio_read (and ep93xx_mdio_write) function to eliminate
   the function prototype.
5) Change all the printk(<level> messages to pr_<level> and remove the 
   __func__ argument.
6) Use platform_get_{resource/irq} to get the platform resources and add
   an error check.
7) Use resource_size() for request_mem_region() and ioremap().
8) Use %pM to print the MAC address at the end of the probe.
9) Use dev->dev_addr not data->dev_addr for the MAC argument because a
   random address could be used if the platform does not supply one.

The message at the end of the probe is left as a printk since it displays
cleaner without the function name that would be displayed with pr_info().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NLennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MSI-X table size needs to be properly set before pci_enable_msix()
is called.  But on certain machines, the writes are delayed and the
MSI-X table size is incorrectly read.  By reading the
BNX2_PCI_MSIX_CONTROL register, the writes are flushed and now
ensure that the MSI-X table is set correctly before MSI-X
is enable on the device.

This patch was originally diagnosed and authored by
Kalyan Ram Chintalapati <kalyanc@vmware.com>.
Signed-off-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NKalyan Ram Chintalapati <kalyanc@vmware.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch implements a firmware command to fetch the eeprom data.
Signed-off-by: NSarveshwar Bandi <sarveshwarb@serverengines.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section
in every case.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use dwmac1000 naming instead of gmac.
The patch also splits the gmac.c file in two new ones:
dwmac1000_core.c and dwmac1000_dma.c.
This could actually help on some architectures where different
DMA engines are used.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch renames the mac100.[ch] as dwmac100.[ch]; this
looks more specific and appropriate for these chip series.
The patch also fixes some spare coding style issues.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the dma related functions (interrupt, start, stop etc.)
out from the main driver code. This will help to support new DMA
engines.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reorganises the internal stmmac ops structure.
The stmmac_ops has been splitted into other three structures named:
 stmmac_ops
 stmmac_dma_ops
 stmmac_desc_ops

This makes the code more clear and also helps the next work to
make the driver more generic.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some platforms, fix_mac_speed is used for
configuring some sysconf registers according
to the working speed.
This patch fixes the fix_mac_speed invocation
that cannot be done if it is a NULL pointer.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some platforms it can be required a different
configuration of the bus. This can be done
by invoking the bus_setup. It is defined
for all the platforms that needs this kind of
configuration.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch rewiews and reorganises all the data
come from the platform removing any dependency
from the stm code.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch converts unicast address list to standard list_head using
previously introduced struct netdev_hw_addr.

Note: this patch also removes a debug printk used for displaying the
mac addresses. Indeed, it's is possible to dump the registers with
ethtool.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pMF kernel extension to display the MAC address.

The address will still be displayed in the FDDI Canonical format.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pMF kernel extension to display the MAC address.

The address will still be displayed in the FDDI Canonical format.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Mon, 2010-01-04 at 23:43 +0000, Maciej W. Rozycki wrote:
> The example below shows an address, and the sequence of bits or symbols
> that would be transmitted when the address is used in the Source Address
> or Destination Address fields on the MAC header.  The transmission line
> shows the address bits in the order transmitted, from left to right.  For
> IEEE 802 LANs these correspond to actual bits on the medium.  The FDDI
> symbols line shows how the FDDI PHY sends the address bits as encoded
> symbols.
>
>         MSB:            35:7B:12:00:00:01
>         Canonical:      AC-DE-48-00-00-80
>         Transmission:   00110101 01111011 00010010 00000000 00000000 00000001
>         FDDI Symbols:   35 7B 12 00 00 01"
>
> Please note that this address has its group bit clear.
>
>  This notation is also defined in the "FDDI MEDIA ACCESS CONTROL-2
> (MAC-2)" (X3T9/92-120) document although that book does not have a need
> to use the MSB form and it's skipped.

Adds 6 bytes to object size for x86

New:
$ size lib/vsprintf.o
   text	   data	    bss	    dec	    hex	filename
   8664	      0	      2	   8666	   21da	lib/vsprintf.o
$ size lib/vsprintf.o
   text    data     bss     dec     hex filename
   8658       0       2    8660    21d4 lib/vsprintf.o
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address and mask.

The only difference in the output is that the output is shown in
the usual colon-separated hex notation.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.

Also, remove the 'mac' variable and use nic->mac directly.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NPeter Jones <pjones@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.

The only difference in the output is that the MAC address is
shown in the usual colon-separated hex notation.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the %pM kernel extension to display the MAC address.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The contents of /proc/net/dev is annoying to parse, because
it changes whether there is a space after the "ethX:" or not.
It depends upon the size of the "Receive bytes" counter,
if the number is below 7 digits, then there is whitespaces
else if the number is 8 digits or above there is no space
between the ":" and the number.

This patch changes the output to assure there is always a space
between the ":" and the number.  Given that all existing userspace
application already need to handle the whitespaces, I see
no breakage of existing tools.
Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to be used together with switch technologies, like RFC3069,
that where the individual ports are not allowed to communicate with
each other, but they are allowed to talk to the upstream router.  As
described in RFC 3069, it is possible to allow these hosts to
communicate through the upstream router by proxy_arp'ing.

This patch basically allow proxy arp replies back to the same
interface (from which the ARP request/solicitation was received).

Tunable per device via proc "proxy_arp_pvlan":
  /proc/sys/net/ipv4/conf/*/proxy_arp_pvlan

This switch technology is known by different vendor names:
 - In RFC 3069 it is called VLAN Aggregation.
 - Cisco and Allied Telesyn call it Private VLAN.
 - Hewlett-Packard call it Source-Port filtering or port-isolation.
 - Ericsson call it MAC-Forced Forwarding (RFC Draft).
Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>