提交 bc7259a2 编写于 作者: J Joe Perches 提交者: David S. Miller

lib/vsprintf.c: Add %pMF to format FDDI bit reversed MAC addresses

On Mon, 2010-01-04 at 23:43 +0000, Maciej W. Rozycki wrote:
> The example below shows an address, and the sequence of bits or symbols
> that would be transmitted when the address is used in the Source Address
> or Destination Address fields on the MAC header.  The transmission line
> shows the address bits in the order transmitted, from left to right.  For
> IEEE 802 LANs these correspond to actual bits on the medium.  The FDDI
> symbols line shows how the FDDI PHY sends the address bits as encoded
> symbols.
>
>         MSB:            35:7B:12:00:00:01
>         Canonical:      AC-DE-48-00-00-80
>         Transmission:   00110101 01111011 00010010 00000000 00000000 00000001
>         FDDI Symbols:   35 7B 12 00 00 01"
>
> Please note that this address has its group bit clear.
>
>  This notation is also defined in the "FDDI MEDIA ACCESS CONTROL-2
> (MAC-2)" (X3T9/92-120) document although that book does not have a need
> to use the MSB form and it's skipped.

Adds 6 bytes to object size for x86

New:
$ size lib/vsprintf.o
   text	   data	    bss	    dec	    hex	filename
   8664	      0	      2	   8666	   21da	lib/vsprintf.o
$ size lib/vsprintf.o
   text    data     bss     dec     hex filename
   8658       0       2    8660    21d4 lib/vsprintf.o
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cf30273b
......@@ -25,6 +25,7 @@
#include <linux/kallsyms.h>
#include <linux/uaccess.h>
#include <linux/ioport.h>
#include <linux/bitrev.h>
#include <net/addrconf.h>
#include <asm/page.h> /* for PAGE_SIZE */
......@@ -681,11 +682,21 @@ static char *mac_address_string(char *buf, char *end, u8 *addr,
char mac_addr[sizeof("xx:xx:xx:xx:xx:xx")];
char *p = mac_addr;
int i;
bool bitrev;
char separator;
if (fmt[1] == 'F') { /* FDDI canonical format */
bitrev = true;
separator = '-';
} else {
bitrev = false;
separator = ':';
}
for (i = 0; i < 6; i++) {
p = pack_hex_byte(p, addr[i]);
p = pack_hex_byte(p, bitrev ? bitrev8(addr[i]) : addr[i]);
if (fmt[0] == 'M' && i != 5)
*p++ = ':';
*p++ = separator;
}
*p = '\0';
......@@ -896,6 +907,10 @@ static char *uuid_string(char *buf, char *end, const u8 *addr,
* - 'M' For a 6-byte MAC address, it prints the address in the
* usual colon-separated hex notation
* - 'm' For a 6-byte MAC address, it prints the hex address without colons
* - 'MF' For a 6-byte MAC FDDI address, it prints the address
* with a dash-separated hex notation with bit reversed bytes
* - 'mF' For a 6-byte MAC FDDI address, it prints the address
* in hex notation without separators with bit reversed bytes
* - 'I' [46] for IPv4/IPv6 addresses printed in the usual way
* IPv4 uses dot-separated decimal without leading 0's (1.2.3.4)
* IPv6 uses colon separated network-order 16 bit hex with leading 0's
......@@ -939,6 +954,7 @@ static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
return resource_string(buf, end, ptr, spec, fmt);
case 'M': /* Colon separated: 00:01:02:03:04:05 */
case 'm': /* Contiguous: 000102030405 */
/* [mM]F (FDDI, bit reversed) */
return mac_address_string(buf, end, ptr, spec, fmt);
case 'I': /* Formatted IP supported
* 4: 1.2.3.4
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册