bnx2: Flush the register writes which setup the MSI-X table

The MSI-X table size needs to be properly set before pci_enable_msix()
is called.  But on certain machines, the writes are delayed and the
MSI-X table size is incorrectly read.  By reading the
BNX2_PCI_MSIX_CONTROL register, the writes are flushed and now
ensure that the MSI-X table is set correctly before MSI-X
is enable on the device.

This patch was originally diagnosed and authored by
Kalyan Ram Chintalapati <kalyanc@vmware.com>.
Signed-off-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NKalyan Ram Chintalapati <kalyanc@vmware.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bnx2.c

@@ -6145,6 +6145,10 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
 	REG_WR(bp, BNX2_PCI_MSIX_TBL_OFF_BIR, BNX2_PCI_GRC_WINDOW2_BASE);
 	REG_WR(bp, BNX2_PCI_MSIX_PBA_OFF_BIT, BNX2_PCI_GRC_WINDOW3_BASE);
 
+	/*  Need to flush the previous three writes to ensure MSI-X
+	 *  is setup properly */
+	REG_RD(bp, BNX2_PCI_MSIX_CONTROL);
+
 	for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
 		msix_ent[i].entry = i;
 		msix_ent[i].vector = 0;