Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 12 8月, 2017 3 次提交
    • T
      perf record: Fix wrong size in perf_record_mmap for last kernel module · 9ad4652b
      由 Thomas Richter 提交于 
      During work on perf report for s390 I ran into the following issue:

0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
        [0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
        x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko

This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).

Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.

It turned out that this wrong size is created by the perf record
command.  What happens is this function call sequence from
__cmd_record():

  perf_session__new():
    perf_session__create_kernel_maps():
      machine__create_kernel_maps():
        machine__create_modules():   Creates map for all loaded kernel modules.
          modules__parse():   Reads /proc/modules and extracts module name and
                              load address (1st and last column)
            machine__create_module():   Called for every module found in /proc/modules.
                              Creates a new map for every module found and enters
                              module name and start address into the map. Since the
                              module end address is unknown it is set to zero.

This ends up with a kernel module map list sorted by module start
addresses.  All module end addresses are zero.

Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.

Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.

On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
        [root@s8360047 perf]# cat /proc/modules
        qeth_l2 86016 1 - Live 0x000003ff804d6000
        qeth 266240 1 qeth_l2, Live 0x000003ff80296000
        ccwgroup 24576 1 qeth, Live 0x000003ff80218000
        vmur 36864 0 - Live 0x000003ff80182000
        qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
        [root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.

When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
    event->mmap.len   = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f

(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().

I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.
Signed-off-by: NThomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9ad4652b
    • M
      perf srcline: Do not consider empty files as valid srclines · d964b1cd
      由 Milian Wolff 提交于 
      Sometimes we get a non-null, but empty, string for the filename from
bfd. This then results in srclines of the form ":0", which is different
from the canonical SRCLINE_UNKNOWN in the form "??:0".  Set the file to
NULL if it is empty to fix this.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-14-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d964b1cd
    • M
      perf util: Take elf_name as const string in dso__demangle_sym · 80c345b2
      由 Milian Wolff 提交于 
      The input string is not modified and thus can be passed in as a pointer
to const data.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-3-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      80c345b2
  3. 11 8月, 2017 2 次提交
  5. 29 7月, 2017 2 次提交
    • G
      perf data: Add mmap[2] events to CTF conversion · f9f6f2a9
      由 Geneviève Bastien 提交于 
      This adds the mmap and mmap2 events to the CTF trace obtained from perf
data.

These events will allow CTF trace visualization tools like Trace Compass
to automatically resolve the symbols of the callchain to the
corresponding function or origin library.

To include those events, one needs to convert with the --all option.
Here follows an output of babeltrace:

  $ sudo perf data convert --all --to-ctf myctftrace
  $ babeltrace ./myctftrace
  [19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 },
 { pid = 638, tid = 638, start = 0x7F54AE39E000, filename =
 "/usr/lib/ld-2.25.so" }
  [19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
 638, tid = 638, start = 0x7F54AE565000, filename =
 "/usr/lib/libudev.so.1.6.6" }
  [19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
 638, tid = 638, start = 0x7FFC093EA000, filename = "[vdso]" }
Signed-off-by: NGeneviève Bastien <gbastien@versatic.net>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-2-gbastien@versatic.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f9f6f2a9
    • G
      perf data: Add callchain to CTF conversion · a3073c8e
      由 Geneviève Bastien 提交于 
      The field perf_callchain, if available, is added to the sampling events
during the CTF conversion. It is an array of u64 values.  The
perf_callchain_size field contains the size of the array.

It will allow the analysis of sampling data in trace visualization tools
like Trace Compass. Possible analyses with those data: dynamic
flamegraphs, correlation with other tracing data like a userspace trace.

Here follows a babeltrace CTF output of a trace with callchain:

  $ babeltrace ./myctftrace
  [17:38:45.672760285] (+?.?????????) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81063EE4, perf_tid = 25841, perf_pid = 25774, perf_period = 1, perf_callchain_size = 7, perf_callchain = [ [0] = 0xFFFFFFFFFFFFFF80, [1] = 0xFFFFFFFF81063EE4, [2] = 0xFFFFFFFF8100C770, [3] = 0xFFFFFFFF81006EC6, [4] = 0xFFFFFFFF8118245E, [5] = 0xFFFFFFFF810A9224, [6] = 0xFFFFFFFF8164A4C6 ] }
  [17:38:45.672777672] (+0.000017387) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81063EE4, perf_tid = 25841, perf_pid = 25774, perf_period = 1, perf_callchain_size = 8, perf_callchain = [ [0] = 0xFFFFFFFFFFFFFF80, [1] = 0xFFFFFFFF81063EE4, [2] = 0xFFFFFFFF8100C770, [3] = 0xFFFFFFFF81006EC6, [4] = 0xFFFFFFFF8118245E, [5] = 0xFFFFFFFF810A9224, [6] = 0xFFFFFFFF8164A4C6, [7] = 0xFFFFFFFF8164ABAD ] }
  [17:38:45.672786700] (+0.000009028) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81063EE4, perf_tid = 25841, perf_pid = 25774, perf_period = 70, perf_callchain_size = 3, perf_callchain = [ [0] = 0xFFFFFFFFFFFFFF80, [1] = 0xFFFFFFFF81063EE4, [2] = 0xFFFFFFFF8100C770 ] }
Signed-off-by: NGeneviève Bastien <gbastien@versatic.net>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-1-gbastien@versatic.net
[ Removed PERF_SAMPLE_CALLCHAIN from the TODO list, jolsa ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a3073c8e
  7. 28 7月, 2017 1 次提交
  9. 27 7月, 2017 5 次提交
  11. 26 7月, 2017 8 次提交
  13. 25 7月, 2017 3 次提交
    • J
      perf evsel: Add verbose output for sys_perf_event_open fallback · 2b04e0f8
      由 Jiri Olsa 提交于 
      Adding info about what is being switched off in the sys_perf_event_open
fallback.

New output (notice the 'switching off' lines):

  $ perf stat -e '{cycles,instructions}' -vvv ls
  Using CPUID GenuineIntel-6-3D
  intel_pt default config: tsc
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING|ID|GROUP
    disabled                         1
    inherit                          1
    enable_on_exec                   1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid 3591  cpu -1  group_fd -1  flags 0x8
  sys_perf_event_open failed, error -22
  switching off cloexec flag
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING|ID|GROUP
    disabled                         1
    inherit                          1
    enable_on_exec                   1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid 3591  cpu -1  group_fd -1  flags 0
  sys_perf_event_open failed, error -22
  switching off exclude_guest, exclude_host
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING|ID|GROUP
    disabled                         1
    inherit                          1
    enable_on_exec                   1
  ------------------------------------------------------------
  sys_perf_event_open: pid 3591  cpu -1  group_fd -1  flags 0
  sys_perf_event_open failed, error -22
  switching off sample_id_all
  ------------------------------------------------------------
  perf_event_attr:
    size                             112
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING|ID|GROUP
    disabled                         1
    inherit                          1
    enable_on_exec                   1
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170721121212.21414-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2b04e0f8
    • A
      perf cgroup: Fix refcount usage · cd8dd032
      由 Arnaldo Carvalho de Melo 提交于 
      When converting from atomic_t to refcount_t we didn't follow the usual
step of initializing it to one before taking any new reference, which
trips over checking if taking a reference for a freed refcount_t, fix
it.

Brendan's report:

 ---
It's 4.12-rc7, with node v4.4.1. I'm building 4.13-rc1 now, as I hit
what I think is another unrelated perf bug and I'm starting to wonder
what else is broken on that version:

(root) /mnt/src/linux-4.12-rc7/tools/perf # ./perf record -F 99 -a -e
cpu-clock --cgroup=docker/f9e9d5df065b14646e8a11edc837a13877fd90c171137b2ba3feb67a0201cb65
-g
perf: /mnt/src/linux-4.12-rc7/tools/include/linux/refcount.h:108:
refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed.
Aborted

that used to work...
 ---

Testing it:

Before:

  # perf stat -e cycles -C 0 --cgroup /
  perf: /home/acme/git/linux/tools/include/linux/refcount.h:108: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed.
  Aborted (core dumped)
  #

After:

  # perf stat -e cycles -C 0 --cgroup /
^C
  Performance counter stats for 'CPU(s) 0':

       132,081,393      cycles                    /

       2.492942763 seconds time elapsed

  #
Reported-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: NElena Reshetova <elena.reshetova@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sudeep Holla <Sudeep.Holla@arm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 79c5fe6d ("perf cgroup: Convert cgroup_sel.refcnt from atomic_t to refcount_t")
Link: http://lkml.kernel.org/n/tip-l7ovfblq14ip2i08m1g0fkhv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cd8dd032
    • T
      perf annotate stdio: Fix --show-total-period · 585d93c5
      由 Taeung Song 提交于 
      We were showing the total number of samples, not the total period as
asked by the user, fix it.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/n/tip-lh2nh89rtqn5x5vbfthw6qml@git.kernel.org
Fixes: 0c4a5bce ("perf annotate: Display total number of samples with --show-total-period")
[ split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      585d93c5
  15. 21 7月, 2017 5 次提交
  17. 19 7月, 2017 11 次提交
    • J
      perf report: Show branch type in callchain entry · b851dd49
      由 Jin Yao 提交于 
      Show branch type in callchain entry. The branch type is printed
with other LBR information (such as cycles/abort/...).

For example:

  perf record -g -j any,save_type
  perf report --branch-history --stdio --no-children

  38.50%  div.c:45                [.] main                    div
          |
          ---main div.c:42 (RET CROSS_2M cycles:2)
             compute_flag div.c:28 (cycles:2)
             compute_flag div.c:27 (RET CROSS_2M cycles:1)
             rand rand.c:28 (cycles:1)
             rand rand.c:28 (RET CROSS_2M cycles:1)
             __random random.c:298 (cycles:1)
             __random random.c:297 (COND_BWD CROSS_2M cycles:1)
             __random random.c:295 (cycles:1)
             __random random.c:295 (COND_BWD CROSS_2M cycles:1)
             __random random.c:295 (cycles:1)
             __random random.c:295 (RET CROSS_2M cycles:9)

Change log

v6: Remove the branch_type_str() since it's moved to branch.c.

v5: Rewrite the branch info print code in util/callchain.c.

v4: Comparing to previous version, the major changes are:
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-8-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b851dd49
    • J
      perf report: Show branch type statistics for stdio mode · 2d78b189
      由 Jin Yao 提交于 
      Show the branch type statistics at the end of perf report --stdio.

For example:

  perf report --stdio

  COND_FWD:  28.5%
  COND_BWD:   9.4%
  CROSS_4K:   0.7%
  CROSS_2M:  14.1%
      COND:  37.9%
    UNCOND:   0.2%
       IND:   6.7%
      CALL:  26.5%
       RET:  28.7%
    SYSRET:   0.0%

  The branch types are:

   COND_FWD: conditional forward
   COND_BWD: conditional backward
       COND: conditional branch
     UNCOND: unconditional branch
        IND: indirect
       CALL: function call
     IND_CALL: indirect function call
        RET: function return
    SYSCALL: syscall
     SYSRET: syscall return
  COND_CALL: conditional function call
   COND_RET: conditional function return

CROSS_4K and CROSS_2M:

They are the metrics checking for branches cross 4K or 2MB pages.
It's an approximate computing. We don't know if the area is 4K or
2MB, so always compute both.

To make the output simple, if a branch crosses 2M area, CROSS_4K
will not be incremented.

Change log

v7: Since the common branch type definitions are changed, some
    tags/strings are updated accordingly.

v6: Remove branch_type_stat_display() since it's moved to branch.c.

v5: Remove the unnecessary sort__mode checking in
    hist_iter__branch_callback().

v4: Comparing to previous version, the major changes are:

Add the computing of JCC forward/JCC backward and cross page checking
by using the from and to addresses.
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-7-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2d78b189
    • J
      perf util: Create branch.c/.h for common branch functions · 992c7e92
      由 Jin Yao 提交于 
      Create new util/branch.c and util/branch.h to contain the common branch
functions. Such as:

branch_type_count(): Count the numbers of branch types
branch_type_name() : Return the name of branch type
branch_type_stat_display(): Display branch type statistics info
branch_type_str(): Construct the branch type string.

The branch type is saved in branch_flags.

Change log:

v8: Change PERF_BR_NONE to PERF_BR_UNKNOWN.

v7: Since the common branch type name is changed (e.g. JCC->COND),
    this patch is performed the modification accordingly.

v6: Move that multiline conditional code inside {} brackets.
    Move branch_type_stat_display() from builtin-report.c to
      branch.c.
    Move branch_type_str() from callchain.c to branch.c.

v5: It's a new patch in v5 patch series.
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-6-git-send-email-yao.jin@linux.intel.com
[ Don't use 'index' and 'stat' as names for variables, it shadows global decls in older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      992c7e92
    • J
      perf report: Refactor the branch info printing code · 8d51735f
      由 Jin Yao 提交于 
      The branch info such as predicted/cycles/... are printed at the
callchain entries.

For example: perf report --branch-history --no-children --stdio

    --1.07%--main div.c:39 (predicted:52.4% cycles:1 iterations:17)
              main div.c:44 (predicted:52.4% cycles:1)
              main div.c:42 (cycles:2)
              compute_flag div.c:28 (cycles:2)
              compute_flag div.c:27 (cycles:1)
              rand rand.c:28 (cycles:1)
              rand rand.c:28 (cycles:1)
              __random random.c:298 (cycles:1)
              __random random.c:297 (cycles:1)
              __random random.c:295 (cycles:1)
              __random random.c:295 (cycles:1)
              __random random.c:295 (cycles:1)

But the current code is difficult to maintain and extend. This patch
refactors the code for easy maintenance.

Change log:

v6: 1. Put the multiline condition code into {} brackets in
       counts_str_build()

    2. Keep the original display order, that is:
       predicted, abort, cycles, iterations

v5: It's a new patch in v5 patch series.
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-5-git-send-email-yao.jin@linux.intel.com
[ Don't use 'index' as a name for a variable, it shadows a globa decl in older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8d51735f
    • J
      perf record: Create a new option save_type in --branch-filter · 60f83fa6
      由 Jin Yao 提交于 
      The option indicates the kernel to save branch type during sampling.

One example:

  perf record -g --branch-filter any,save_type <command>
Signed-off-by: NYao Jin <yao.jin@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1500379995-6449-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      60f83fa6
    • D
      perf header: Add event desc to pipe-mode header · f9ebdccf
      由 David Carrillo-Cisneros 提交于 
      Add event descriptor to perf header output in pipe-mode.

After this patch:

  $ perf record -e cycles sleep 1 | perf report --header
  # ========
  # captured on: Mon Jun  5 22:52:13 2017
  # ========
  #
  # hostname : lphh20
  # os release : 4.3.5-smp-801.43.0.0
  # perf version : 4.12.rc2.g439987
  # arch : x86_64
  # nrcpus online : 72
  # nrcpus avail : 72
  # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
  # cpuid : GenuineIntel,6,63,2
  # total memory : 264134144 kB
  # cmdline : /root/perf record -e cycles sleep 1
  # event : name = cycles, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
  # CPU_TOPOLOGY info available, use -I to display
  # NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: intel_bts = 6, cpu = 4, msr = 49, uncore_cbox_10 = 36, uncore_cbox_11 = 37, uncore_cbox_12 = 38, uncore_cbox_13 = 39, uncore_cbox_14 = 40, uncore_cbox_15 = 41, uncore_cbox_16 = 42, uncore_cbox_17 = 43, software = 1, power = 7, uncore_irp = 24, uncore_pcu = 48, tracepoint = 2, uncore_imc_0 = 16, uncore_imc_1 = 17, uncore_imc_2 = 18, uncore_imc_3 = 19, uncore_imc_4 = 20, uncore_imc_5 = 21, uncore_imc_6 = 22, uncore_imc_7 = 23, uncore_qpi_0 = 8, uncore_qpi_1 = 9, uncore_cbox_0 = 26, uncore_cbox_1 = 27, uncore_cbox_2 = 28, uncore_cbox_3 = 29, uncore_cbox_4 = 30, uncore_cbox_5 = 31, uncore_cbox_6 = 32, uncore_cbox_7 = 33, uncore_cbox_8 = 34, uncore_cbox_9 = 35, uncore_r2pcie = 13, uncore_r3qpi_0 = 10, uncore_r3qpi_1 = 11, uncore_r3qpi_2 = 12, uncore_sbox_0 = 44, uncore_sbox_1 = 45, uncore_sbox_2 = 46, uncore_sbox_3 = 47, breakpoint = 5, uncore_ha_0 = 14, uncore_ha_1 = 15, uncore_ubox = 25
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB (null) ]

Prior to this patch, event was not printed.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-17-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f9ebdccf
    • D
      perf tools: Add feature header record to pipe-mode · e9def1b2
      由 David Carrillo-Cisneros 提交于 
      Add header record types to pipe-mode, reusing the functions
used in file-mode and leveraging the new struct feat_fd.

For alignment, check that synthesized events don't exceed
pagesize.

Add the perf_event__synthesize_feature event call back to
process the new header records.

Before this patch:

  $ perf record -o - -e cycles sleep 1 | perf report --stdio --header
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  ...

After this patch:
  $ perf record -o - -e cycles sleep 1 | perf report --stdio --header
  # ========
  # captured on: Mon May 22 16:33:43 2017
  # ========
  #
  # hostname : my_hostname
  # os release : 4.11.0-dbx-up_perf
  # perf version : 4.11.rc6.g6277c80
  # arch : x86_64
  # nrcpus online : 72
  # nrcpus avail : 72
  # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz
  # cpuid : GenuineIntel,6,63,2
  # total memory : 263457192 kB
  # cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1
  # HEADER_CPU_TOPOLOGY info available, use -I to display
  # HEADER_NUMA_TOPOLOGY info available, use -I to display
  # pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]
  ...

Support added for the subcommands: report, inject, annotate and script.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e9def1b2
    • D
      perf tool: Add show_feature_header to perf_tool · 114f709e
      由 David Carrillo-Cisneros 提交于 
      Add show_feat_hdr to control level of printed information of feature
headers.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-15-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      114f709e
    • D
      perf header: Change FEAT_OP* macros · a4d8c985
      由 David Carrillo-Cisneros 提交于 
      There are three FEAT_OP* macros:
  - FEAT_OPA: for features without process record.
  - FEAT_OPP: for features with process record.
  - FEAT_OPF: like FEAT_OPP but to show only if show_full_info flags
    is set.

To add pipe-mode headers we need yet another variation of the macros
(one to specify whether a feature generates an auxiliar record).

Instead, we redefine macros so that:
  - show_full_info is specified as an argument (to remove the
  FEAT_OPF variation) and,
  - it always sets "process" handler (to remove the FEAT_OPA variation).
  Individual process handlers can be NULLed individually.

This allows to define two variations only:
  - FEAT_OPR: synthesizes auxiliar event record.
  - FEAT_OPN: doesn't synthesize an auxiliar event record.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-14-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a4d8c985
    • D
      perf header: Add a buffer to struct feat_fd · 0b3d3410
      由 David Carrillo-Cisneros 提交于 
      Extend struct feat_fd to use a temporal buffer in pipe-mode, instead of
perf.data's file descriptor.

The header features build_id and aux_trace already have logic to print
in file-mode that heavily rely on lseek the file. For now, leave such
features inactive in pipe-mode and print a warning if their functions
are called in pipe-mode.
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-13-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0b3d3410
    • D
      perf header: Make write_pmu_mappings pipe-mode friendly · a02c395c
      由 David Carrillo-Cisneros 提交于 
      In pipe-mode, we will operate over a buffer instead of a file descriptor
but write_pmu_mappings uses lseek to move over the perf.data file.

Refactor write_pmu_mappings to avoid the usage of lseek and allow
reusing the same logic in pipe-mode (next patch).
Signed-off-by: NDavid Carrillo-Cisneros <davidcc@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170718042549.145161-12-davidcc@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a02c395c