During work on perf report for s390 I ran into the following issue:

0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
        [0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
        x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko

This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).

Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.

It turned out that this wrong size is created by the perf record
command.  What happens is this function call sequence from
__cmd_record():

  perf_session__new():
    perf_session__create_kernel_maps():
      machine__create_kernel_maps():
        machine__create_modules():   Creates map for all loaded kernel modules.
          modules__parse():   Reads /proc/modules and extracts module name and
                              load address (1st and last column)
            machine__create_module():   Called for every module found in /proc/modules.
                              Creates a new map for every module found and enters
                              module name and start address into the map. Since the
                              module end address is unknown it is set to zero.

This ends up with a kernel module map list sorted by module start
addresses.  All module end addresses are zero.

Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.

Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.

On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
        [root@s8360047 perf]# cat /proc/modules
        qeth_l2 86016 1 - Live 0x000003ff804d6000
        qeth 266240 1 qeth_l2, Live 0x000003ff80296000
        ccwgroup 24576 1 qeth, Live 0x000003ff80218000
        vmur 36864 0 - Live 0x000003ff80182000
        qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
        [root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.

When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
    event->mmap.len   = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f

(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().

I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.
Signed-off-by: NThomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Sometimes we get a non-null, but empty, string for the filename from
bfd. This then results in srclines of the form ":0", which is different
from the canonical SRCLINE_UNKNOWN in the form "??:0".  Set the file to
NULL if it is empty to fix this.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-14-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The input string is not modified and thus can be passed in as a pointer
to const data.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-3-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf trace' using 'touch' to write to a temp
file, then checks that that was captured by the vfs_getname was used by
'perf trace', that already handles "probe:vfs_getname" if present, and
used in the "open" syscall "filename" argument beautifier.

Testing it:

  # perf test "trace + vfs_getname"
  61: Check open filename arg using perf trace + vfs_getname: Ok
  #

  # perf test -v "trace + vfs_getname"
  61: Check open filename arg using perf trace + vfs_getname:
  --- start ---
  test child forked, pid 30846
  Added new event:
    probe:vfs_getname    (on getname_flags:72 with pathname=result->name:string)

  You can now use it in all perf tools, such as:

  	perf record -e probe:vfs_getname -aR sleep 1

       2.237 ( 0.012 ms): touch/30855 open(filename: /tmp/temporary_file.kmoWQ, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
  test child finished with 0
  ---- end ----
  Check open filename arg using perf trace + vfs_getname: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j02nobfvvn9c7yrphdsnbqx0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This test uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf record' using 'touch' to write to a temp file,
then checks that that was captured by the vfs_getname probe in the generated
perf.data file, with the temp file name as the pathname argument.

Using it:

  # perf test "Use vfs_getname"
  60: Use vfs_getname probe to get syscall args filenames: Ok
  # perf test -v "Use vfs_getname"
  60: Use vfs_getname probe to get syscall args filenames:
  --- start ---
  test child forked, pid 16414
  Added new event:
    probe:vfs_getname    (on getname_flags:72 with pathname=result->name:string)

  You can now use it in all perf tools, such as:

	perf record -e probe:vfs_getname -aR sleep 1

  Recording open file:
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.022 MB /tmp/vaca.perf.data.QZsn7 (13 samples) ]
  Looking at perf.data file for vfs_getname records for the file we touched:
             touch 16421 [002] 1255152.879561: probe:vfs_getname: (ffffffffa626e608) pathname="/tmp/vaca.l10SL"
  test child finished with 0
  ---- end ----
  Use vfs_getname probe to get syscall args filenames: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t555fnhbcbxnukltk23dqxur@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Multiple tests will be able to reuse these functions, to test things
like perf report, 'trace', etc, using this probe.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48xagvozhouhyi8fjota6o2d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that we have shell tests, install them.

Developers don't need this pass, as 'perf test' will look first at the
in tree scripts at tools/perf/tests/shell/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j21u4v0jsehi0lpwqwjb4j45@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

First perf shell test:

  # perf test vfs_getname
  60: Add vfs_getname probe to get syscall args filenames: Ok
  #

In verbose mode:

  # perf test -v vfs_getname
  60: Add vfs_getname probe to get syscall args filenames:
  --- start ---
  test child forked, pid 19146
  Added new event:
    probe:vfs_getname    (on getname_flags:72 with pathname=result->name:string)

  You can now use it in all perf tools, such as:

	  perf record -e probe:vfs_getname -aR sleep 1

  test child finished with 0
  ---- end ----
  Add vfs_getname probe to get syscall args filenames: Ok
  #

And if the vmlinux file is not found:

  # mv ../build/v4.12.0-rc6+/vmlinux ../build/v4.12.0-rc6+/vmlinux.hidden
  # perf test vfs_getname
  60: Add vfs_getname probe to get syscall args filenames: Skip
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8f3n22c1yn516ev30s603ow2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before:

  # perf test Synth
  39: Synthesize thread map  : Ok
  41: Synthesize cpu map     : Ok
  42: Synthesize stat config : Ok
  43: Synthesize stat        : Ok
  44: Synthesize stat round  : Ok
  45: Synthesize attr update : Ok
  # perf test list Synth
  #

After:

  # perf test Synth
  39: Synthesize thread map  : Ok
  41: Synthesize cpu map     : Ok
  42: Synthesize stat config : Ok
  43: Synthesize stat        : Ok
  44: Synthesize stat round  : Ok
  45: Synthesize attr update : Ok
  # perf test list Synth
  39: Synthesize thread map
  41: Synthesize cpu map
  42: Synthesize stat config
  43: Synthesize stat
  44: Synthesize stat round
  45: Synthesize attr update
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v95tqqzuwawsmds3zn2mosje@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To allow testing by directly using perf tools in scripts, checking that
the effects on the system are the ones expected and that the output
produced is as well the desired one.

For instance, adding a probe at a well known location with 'perf probe',
then checking that the results from using that probe to record are the
desired ones, etc.

The next csets will introduce tests using this new testing
infrastructure.

The scripts should return 0 for Ok, 1 for FAIL and 2 for SKIP.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-swbpn7amrjqffh83lsr39s9p@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This way we'll be able to pass more test specific parameters without
having to change this function signature.

Will be used by the upcoming 'shell tests', shell scripts that will
call perf tools and check if they work as expected, comparing its
effects on the system (think 'perf probe foo') the output produced, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before:

  # perf test Synth
  39: Synthesize thread map  : Ok
  41: Synthesize cpu map     : Ok
  42: Synthesize stat config : Ok
  43: Synthesize stat        : Ok
  44: Synthesize stat round  : Ok
  45: Synthesize attr update : Ok
  #
  # perf test list Synth
   1: Synthesize thread map
   2: Synthesize cpu map
   3: Synthesize stat config
   4: Synthesize stat
   5: Synthesize stat round
   6: Synthesize attr update
  #

After:

  # perf test Synth
  39: Synthesize thread map  : Ok
  41: Synthesize cpu map     : Ok
  42: Synthesize stat config : Ok
  43: Synthesize stat        : Ok
  44: Synthesize stat round  : Ok
  45: Synthesize attr update : Ok
  #
  # perf test list Synth
  39: Synthesize thread map
  41: Synthesize cpu map
  42: Synthesize stat config
  43: Synthesize stat
  44: Synthesize stat round
  45: Synthesize attr update
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pjhuhkphs7o3tkbqrukfv6bz@git.kernel.org
Fixes: e8210cef ("perf tests: Introduce iterator function for tests")
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170724234015.5165-6-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The stat shadow saved values rbtree is indexed by a pointer.  Fix the
comparison function:

- We cannot return a pointer delta as an int because that loses bits on
  64bit.

- Doing pointer arithmetic on the struct pointer only works if the
  objects are spaced by the multiple of the object size, which is not
  guaranteed for individual malloc'ed object

Replace it with a proper comparison.

This fixes various problems with values not being found.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170724234015.5165-4-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Update and cleanup POWER9 PMU events.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170802174617.GA32545@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Drop the .json suffix for events directory in the mapfile.csv.

Now that we have separate JSON files for each topic in a CPU (eg: see
tools/perf/pmu-events/arch/powerpc/power8/*.json) the .json suffix in
the mapfile is misleading and redundant.
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20170802174617.GA32545@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before patch:

  $ uname -m
  ppc64le
  $ ./perf script -s ./scripts/python/syscall-counts.py
  Install the audit-libs-python package to get syscall names.
  For example:
    # apt-get install python-audit (Ubuntu)
    # yum install audit-libs-python (Fedora)
    etc.

  Press control+C to stop and show the summary
  ^CWarning:
  4 out of order events recorded.

  syscall events:

  event                                          count
  ----------------------------------------  -----------
  4                                             504638
  54                                              1206
  221                                               42
  55                                                21
  3                                                 12
  167                                               10
  11                                                 8
  6                                                  7
  125                                                6
  5                                                  6
  108                                                5
  162                                                4
  90                                                 4
  45                                                 3
  33                                                 3
  311                                                1
  246                                                1
  238                                                1
  93                                                 1
  91                                                 1

After patch:
  ./perf script -s ./scripts/python/syscall-counts.py
  Press control+C to stop and show the summary
  ^CWarning:
  5 out of order events recorded.

  syscall events:

  event                                          count
  ----------------------------------------  -----------
  write                                         643411
  ioctl                                           1206
  futex                                             54
  fcntl                                             27
  poll                                              14
  read                                              12
  execve                                             8
  close                                              7
  mprotect                                           6
  open                                               6
  nanosleep                                          5
  fstat                                              5
  mmap                                               4
  inotify_add_watch                                  3
  brk                                                3
  access                                             3
  timerfd_settime                                    1
  clock_gettime                                      1
  epoll_wait                                         1
  ftruncate                                          1
  munmap                                             1
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NPaul Clarke <pc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/n/tip-bnl67p1alkvx97pn9moxz3qp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Also trying a new approach, using the copy of uapi/linux/perf_event.h we
auto generate the string tables, then include it in the ioctl cmd
beautifier.

This way either the perf developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.

E.g., looking at some of the perf ioctls issued by the 'perf test' test cases:

  # (perf trace -e perf_event_open,ioctl perf test)  2>&1 | egrep "(cmd: PERF_|perf_event_open)"
  4: Read samples using the mmap interface      :
   348.811 ( 0.062 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), group_fd: -1, flags: FD_CLOEXEC) = 3
   348.878 ( 0.039 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4
   348.919 ( 0.036 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5
   348.958 ( 0.036 ms): perf/23351 perf_event_open(attr_uptr: 0x414a5e8, pid: 23351 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 6
   349.070 ( 0.046 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), group_fd: -1, flags: FD_CLOEXEC) = 7
   349.120 ( 0.037 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 8
   349.161 ( 0.036 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 9
   349.201 ( 0.035 ms): perf/23351 perf_event_open(attr_uptr: 0x414aa38, pid: 23351 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 10
   349.306 ( 0.041 ms): perf/23351 perf_event_open(attr_uptr: 0x414b2d8, pid: 23351 (perf), group_fd: -1, flags: FD_CLOEXEC) = 11
   349.611 ( 0.005 ms): perf/23351 ioctl(fd: 3<anon_inode:[perf_event]>, cmd: PERF_ID, arg: 0x7fff025999b8) = 0
   349.619 ( 0.002 ms): perf/23351 ioctl(fd: 7<anon_inode:[perf_event]>, cmd: PERF_SET_OUTPUT, arg: 0x3  ) = 0
   349.623 ( 0.002 ms): perf/23351 ioctl(fd: 7<anon_inode:[perf_event]>, cmd: PERF_ID, arg: 0x7fff025999b8) = 0
   349.627 ( 0.002 ms): perf/23351 ioctl(fd: 11<anon_inode:[perf_event]>, cmd: PERF_SET_OUTPUT, arg: 0x3 ) = 0
   349.630 ( 0.001 ms): perf/23351 ioctl(fd: 11<anon_inode:[perf_event]>, cmd: PERF_ID, arg: 0x7fff025999b8) = 0
<SNIP>
  7: PERF_RECORD_* events & perf_sample fields  :
   647.150 ( 0.014 ms): perf/23354 perf_event_open(attr_uptr: 0x7fff02599920, pid: -1, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 3
   647.197 ( 0.076 ms): perf/23354 perf_event_open(attr_uptr: 0x414b478, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
   647.289 ( 0.040 ms): perf/23354 perf_event_open(attr_uptr: 0x414b478, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
   647.368 ( 0.011 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), group_fd: -1, flags: FD_CLOEXEC) = 3
   647.381 ( 0.005 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4
   647.387 ( 0.005 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5
   647.393 ( 0.004 ms): perf/23354 perf_event_open(attr_uptr: 0x414a5e8, pid: 23355 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 7
   648.026 ( 0.011 ms): perf/23354 ioctl(fd: 3<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
   648.038 ( 0.002 ms): perf/23354 ioctl(fd: 4<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
   648.042 ( 0.002 ms): perf/23354 ioctl(fd: 5<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
   648.045 ( 0.002 ms): perf/23354 ioctl(fd: 7<anon_inode:[perf_event]>, cmd: PERF_ENABLE) = 0
<SNIP>
  18: Breakpoint overflow signal handler         :
  2772.721 ( 0.017 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599d20, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 3
  2772.748 ( 0.009 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599e60, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
  2772.768 ( 0.002 ms): perf/23375 ioctl(fd: 3, cmd: PERF_RESET) = 0
  2772.776 ( 0.008 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599e60, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
  2772.788 ( 0.002 ms): perf/23375 ioctl(fd: 4, cmd: PERF_RESET) = 0
  2772.791 ( 0.006 ms): perf/23375 perf_event_open(attr_uptr: 0x7fff02599e60, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 5
  2772.800 ( 0.001 ms): perf/23375 ioctl(fd: 5, cmd: PERF_RESET) = 0
  2772.803 ( 0.005 ms): perf/23375 ioctl(fd: 3, cmd: PERF_ENABLE) = 0
  2772.810 ( 0.004 ms): perf/23375 ioctl(fd: 4, cmd: PERF_ENABLE) = 0
  2772.815 ( 0.004 ms): perf/23375 ioctl(fd: 5, cmd: PERF_ENABLE) = 0
<SNIP>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ahotwscqt080ae0ulu3zznh2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Also trying a new approach, using a copy of uapi/linux/vhost.h we auto
generate the string tables, then include it in the ioctl cmd beautifier.

This way either the KVM developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.

E.g., doing syswide tracing grepping for the newly beautified VHOST
ioctls:

  # perf trace -e ioctl 2>&1 | grep VHOST
  3873.064 ( 0.099 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dffe0) = 0
  3873.168 ( 0.019 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dffe0) = 0
  3873.226 ( 0.006 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_GET_VRING_BASE, arg: 0x7fff053dff60) = 0
  3873.244 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_GET_VRING_BASE, arg: 0x7fff053dff60) = 0
  3873.817 ( 0.014 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dff20) = 0
  3873.838 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dff20) = 0
  4701.372 ( 0.006 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dfe20) = 0
  4701.417 ( 0.007 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_CALL, arg: 0x7fff053dfe20) = 0
  4701.563 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_FEATURES, arg: 0x7fff053dfe88) = 0
  4701.571 ( 0.028 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_MEM_TABLE, arg: 0x563c7c906870) = 0
  4701.604 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_NUM, arg: 0x7fff053dff00) = 0
  4701.609 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_BASE, arg: 0x7fff053dff00) = 0
  4701.615 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_ADDR, arg: 0x7fff053dfe70) = 0
  4701.619 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_KICK, arg: 0x7fff053dfef0) = 0
  4701.634 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_NUM, arg: 0x7fff053dff00) = 0
  4701.640 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_BASE, arg: 0x7fff053dff00) = 0
  4701.644 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_ADDR, arg: 0x7fff053dfe70) = 0
  4701.648 ( 0.009 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_SET_VRING_KICK, arg: 0x7fff053dfef0) = 0
  4701.665 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dff80) = 0
  4701.672 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: VHOST_NET_SET_BACKEND, arg: 0x7fff053dff80) = 0
^C

 '-e ioctl' uses tracepoint filters, in time this will be replaces by
eBPF filters hooked at the syscall tracepoints and that "grep VHOST"
will also be done with eBPF, right at the kernel, to reduce overhead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2gthnhpliunvakywjterrzz3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will use it to generate tables for beautifying ioctl's 'cmd' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nxwpq34hu6te1m2ra5m7o8n9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not all subsystems use the fact that we may have the same _IOC_NR for
different _IOC_DIR, as in the end it'll result in a different ioctl
number.

So, for instance, vhost virtio has:

  #define VHOST_GET_FEATURES      _IOR(VHOST_VIRTIO, 0x00, __u64)
  #define VHOST_SET_FEATURES      _IOW(VHOST_VIRTIO, 0x00, __u64)

So same _IOC_NR (0x00) but different _IOC_DIR (R versus W), but it also
have:

  #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
  #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)

A "get" operation that uses a "W" _IOC_DIR, and its implementation, uses
copy_to_user, it should've probably been _IOR().

Then:

  /* Base value where queue looks for available descriptors */
  #define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
  /* Get accessor: reads index, writes value in num */
  #define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)

So we'll need to use _IOC_DIR() to disambiguate the VHOST_VIRTIO ioctl
bautifier.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rq6q717ql7j2z7kuccafgq84@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Also trying a new approach, using a copy of uapi/linux/kvm.h we auto
generate the string tables, then include it in the ioctl cmd beautifier.

This way either the KVM developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.

E.g., a tracing a process and its threads, but would work for system wide as
well, just drop that '-p 21238', to see ioctls for DRM, tty, sound, etc:

  # perf trace -e ioctl -p 21238 2>&1 | grep -v KVM_RUN
    7801.536 ( 0.003 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73c0) = 0
  <SNIP lots of the last one>
    7801.715 ( 0.001 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73e0) = 0
   11001.051 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
   11001.225 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
   10750.377 (249.963 ms): CPU 0/KVM/21276  ... [continued]: ioctl()) = 0
   11011.780 ( 0.015 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d90) = 1
   11011.929 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x7fff053e1000) = 1
   11012.090 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
   11023.127 ( 0.020 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d90) = 1
   11000.483 (249.807 ms): CPU 0/KVM/21276  ... [continued]: ioctl()) = 0
   25620.877 ( 0.042 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7fff053e1080) = 0
  <SNIP several of the last one>
   25621.025 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7fff053e10a0) = 0
   25500.803 (120.186 ms): CPU 0/KVM/21276  ... [continued]: ioctl()) = 0
   25621.078 ( 0.005 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73c0) = 0
  <SNIP lots of the last one>
   25621.346 ( 0.001 ms): CPU 0/KVM/21276 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f484c6c73e0) = 0
   40456.997 ( 0.100 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dffe0) = 0
   40457.100 ( 0.019 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dffe0) = 0
   40457.133 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (READ|WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff60) = 0
   40457.139 ( 0.001 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (READ|WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff60) = 0
   40458.503 ( 0.027 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfc80) = 0
   40458.601 ( 0.030 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfc80) = 0
   40458.649 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dff20) = 0
   40458.654 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dff20) = 0
   40458.657 ( 0.018 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dff00  ) = 0
   40459.077 ( 0.017 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dff00  ) = 0
   40459.123 ( 0.017 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd20) = 0
  <SNIP lots of the last one>
   40463.477 ( 0.013 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd20) = 0
   40464.874 ( 0.010 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_GET_VCPU_EVENTS, arg: 0x7fff053e0000) = 0
   40464.892 ( 0.048 ms): qemu-system-x8/21238 ioctl(fd: 12</dev/kvm>, cmd: KVM_CHECK_EXTENSION, arg: 0x4c           ) = 1
   40464.991 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_GET_CLOCK, arg: 0x7fff053e0040) = 0
   40464.962 ( 0.013 ms): CPU 0/KVM/21276 ioctl(fd: 20<anon_inode:kvm-vcpu>, cmd: KVM_GET_MSRS, arg: 0x7f484c6c7670) = 1
   44540.437 ( 0.103 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
   44540.544 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dfea0  ) = 0
   44540.555 ( 0.029 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
   44540.586 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IRQFD, arg: 0x7fff053dfea0  ) = 0
   44540.592 ( 0.027 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
   44540.625 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dfe20) = 0
   44540.639 ( 0.018 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_GSI_ROUTING, arg: 0x563c7c93c000) = 0
   44540.658 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x21, 0x8), arg: 0x7fff053dfe20) = 0
   44540.686 ( 0.015 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfbe0) = 0
   44540.727 ( 0.014 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfbe0) = 0
   44540.748 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0, 0x8), arg: 0x7fff053dfe88) = 0
   44540.754 ( 0.026 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x3, 0x8), arg: 0x563c7c906870) = 0
   44540.783 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x10, 0x8), arg: 0x7fff053dff00) = 0
   44540.787 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff00) = 0
   44540.793 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x11, 0x28), arg: 0x7fff053dfe70) = 0
   44540.796 ( 0.010 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x20, 0x8), arg: 0x7fff053dfef0) = 0
   44540.811 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x10, 0x8), arg: 0x7fff053dff00) = 0
   44540.814 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x12, 0x8), arg: 0x7fff053dff00) = 0
   44540.819 ( 0.002 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x11, 0x28), arg: 0x7fff053dfe70) = 0
   44540.822 ( 0.005 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x20, 0x8), arg: 0x7fff053dfef0) = 0
   44540.837 ( 0.006 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dff80) = 0
   44540.862 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 27</dev/vhost-net>, cmd: (WRITE, 0xaf, 0x30, 0x8), arg: 0x7fff053dff80) = 0
   44540.887 ( 0.014 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd00) = 0
  <SNIP lots of the last one>
   44542.756 ( 0.020 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_IOEVENTFD, arg: 0x7fff053dfd00) = 0
   44542.809 ( 0.007 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_VCPU_EVENTS, arg: 0x7fff053dffb0) = 0
   44542.819 ( 0.003 ms): qemu-system-x8/21238 ioctl(fd: 12</dev/kvm>, cmd: KVM_CHECK_EXTENSION, arg: 0x4c           ) = 1
   44543.016 ( 0.004 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SET_CLOCK, arg: 0x7fff053dfff0) = 0
   44543.022 ( 0.008 ms): qemu-system-x8/21238 ioctl(fd: 20<anon_inode:kvm-vcpu>, cmd: KVM_KVMCLOCK_CTRL             ) = 0
   46952.502 ( 0.010 ms): qemu-system-x8/21238 ioctl(fd: 13<anon_inode:kvm-vm>, cmd: KVM_SIGNAL_MSI, arg: 0x563c83379d70) = 1
   46829.292 (249.860 ms): CPU 0/KVM/21276  ... [continued]: ioctl()) = 0
  ^C
[root@jouet linux]#

Since there are clashes in _IOC_NR() for some cases, notably ioctls with
PPC_ and ARM_ in its name and some that depend on some internal state to
be valid, but use the same number as others, those were removed in the
shell script that builds the table, tools/perf/trace/beauty/kvm_ioctl.sh.

Since so far we're supporting only x86 in the 'cmd' ioctl arg beautifier
in perf trace, we can leave fully supporting these ioctls for later.

There are some more to handle here, notably the one for /dev/vhost-net, will
come later.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zxhebe579n338d7qrnjoctes@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will use it to generate tables for beautifying ioctl's 'cmd' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nxwpq34hu6te1m2ra5m7o8n9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This time we try a new approach, using a copy of uapi/sound/asound.h we
auto generate the string tables, then include it in the ioctl cmd
beautifier.

This way either the sound developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.

E.g.:

  # perf trace -p 22084 -e ioctl 2>&1 | head -5
     0.000 ( 0.068 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
     0.344 ( 0.041 ms): alsa-sink-ALC3/22084 ioctl(fd: 46</dev/snd/controlC1>, cmd: SNDRV_CTL_ELEM_READ, arg: 0x7fe764018ee0) = 0
     0.403 ( 0.011 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
     0.427 ( 0.009 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_STATUS_EXT, arg: 0x7fe76c2e0b30) = 0
     2.461 ( 0.042 ms): alsa-sink-ALC3/22084 ioctl(fd: 49</dev/snd/pcmC1D0p>, cmd: SNDRV_PCM_HWSYNC, arg: 0x557f8d7fa0f0) = 0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8zuyf3e3u6jjcb2xzerw0kdi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will use it to generate tables for beautifying ioctl's 'cmd' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wit4wwmrh9d37dtgtk0glbbj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This time we try a new approach, using uapi/drm/ copies of drm.h and
i915_drm.h we auto generate the string tables, then include it in the
ioctl cmd beautifier.

This way either the DRM developers will add the new commands to the
tools/ copy, like is happening with other areas of tools/include/ (bpf.h
comes to mind), or we'll be notified when building perf that our copy
drifted.

Either way the time from a new command being added to when 'perf trace'
gets to know it is greatly shortened, for instance:

  # strace -p 22401 -e ioctl
  ioctl(8, DRM_IOCTL_I915_GEM_BUSY, 0x7ffc934f7600) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_SET_DOMAIN, 0x7ffc934f7550) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_SW_FINISH, 0x7ffc934f76e0) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_SW_FINISH, 0x7ffc934f7780) = 0
  ioctl(8, _IOC(_IOC_READ|_IOC_WRITE, 0x64, 0x69, 0x40), 0x7ffc934f7700) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_SET_DOMAIN, 0x7ffc934f7780) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_MADVISE, 0x7ffc934f76f0) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_BUSY, 0x7ffc934f76c0) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_MADVISE, 0x7ffc934f76b0) = 0
  ioctl(8, DRM_IOCTL_I915_GEM_SET_DOMAIN, 0x7ffc934f76d0) = 0
  ioctl(8, DRM_IOCTL_MODE_ADDFB, 0x7ffc934f7880) = 0
  ioctl(8, DRM_IOCTL_MODE_PAGE_FLIP, 0x7ffc934f77d0) = 0
  ^Cstrace: Process 22401 detached

versus:

  # perf trace -p 22401 -e ioctl
  1010.856 (0.006 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffc934f7600) = 0
  1010.865 (0.003 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffc934f7550) = 0
  1010.872 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SW_FINISH, arg: 0x7ffc934f76e0) = 0
  1010.939 (0.015 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SW_FINISH, arg: 0x7ffc934f7780) = 0
  1010.959 (0.085 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_EXECBUFFER2, arg: 0x7ffc934f7700) = 0
  1011.048 (0.003 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffc934f7780) = 0
  1011.056 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffc934f76f0) = 0
  1011.060 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffc934f76c0) = 0
  1011.064 (0.003 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffc934f76b0) = 0
  1011.068 (0.002 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_SET_DOMAIN, arg: 0x7ffc934f76d0) = 0
  1011.074 (0.009 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_MODE_ADDFB, arg: 0x7ffc934f7880 ) = 0
  1011.096 (0.072 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_MODE_PAGE_FLIP, arg: 0x7ffc934f77d0) = 0
^C[root@jouet linux]#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mly2d7v9kf28rso81dijbixq@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We will use it to generate tables for beautifying ioctl's 'cmd' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqoq114h917u6ggazn8m1w0t@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

By using the _IOC_(DIR,NR,TYPE,SIZE) macros to lookup a 'type' keyed
table that then gets indexed by 'nr', falling back to a notation similar
to the one used by 'strace', only more compact, i.e.:

   474.356 ( 0.007 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xae, 0x1c), arg: 0x7ffc934f7880) = 0
   474.369 ( 0.053 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xb0, 0x18), arg: 0x7ffc934f77d0) = 0
   505.055 ( 0.014 ms): gnome-shell/22401 ioctl(fd: 8</dev/dri/card0>, cmd: (READ|WRITE, 0x64, 0xaf, 0x4), arg: 0x7ffc934f741c) = 0

This also moves it out of builtin-trace.c and into trace/beauty/ioctl.c
to better compartimentalize all these formatters.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s3enursdxsvnhdomh6qlte4g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We copy headers from include/, arch/ to allow tools/ use defines,
structs from newer kernels and still be able to build on older systems.

We then, as part of a build, check if those copies got out of sync, when
we emit a warning, so that we can check if something needs to be
reflected on the tools, e.g. a 'perf trace' syscall argument beautifier
needs tweaking.

But we don't have to be super strict with that, for instance, extra
spaces, tabs or blank lines aren't problematic, so change
check-headers.sh to have "--ignore-blank-lines --ignore-space-change" as
default "diff" arguments.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d8emqpdc3m2qtzt1ei8ra2tf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we can build on older systems where otherwise we would end up
with:

    CC       /tmp/build/perf/trace/beauty/ioctl.o
  trace/beauty/ioctl.c: In function 'ioctl__scnprintf_tty_cmd':
  trace/beauty/ioctl.c:25:17: error: 'TIOCGEXCL' undeclared (first use in this function)
  trace/beauty/ioctl.c:25:17: note: each undeclared identifier is reported only once for each function it appears in
  trace/beauty/ioctl.c:25:2: error: array index in initializer not of integer type
  trace/beauty/ioctl.c:25:2: error: (near initialization for 'ioctl_tty_cmd')

This way we can build a tool on an older system and it will still be
capable of processing perf.data files generated on newer systems.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8qvkv6txwuzua6d0yvt65wl3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In this patch we changed the header checks:

  perf build: Clarify header version warning message

Unfortunately the header checks were copied to various places and thus the message got
out of sync. Fix some of them here.

Note that there's still old, misleading messages remaining in:

  tools/objtool/Makefile: || echo "warning: objtool: x86 instruction decoder differs from kernel" >&2 )) || true
  tools/objtool/Makefile: || echo "warning: objtool: orc_types.h differs from kernel" >&2 )) || true

here objtool copied the perf message, plus:

 tools/perf/util/intel-pt-decoder/Build: || echo "Warning: Intel PT: x86 instruction decoder differs from kernel" >&2 )) || true

here the PT code regressed over the original message and only emits a vague warning
instead of specific file names...

All of this should be consolidated into tools/Build/ and used in a consistent
manner.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095130.bblldwxjz5hamybb@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Change this:

  Warning: arch/x86/include/asm/disabled-features.h differs from kernel
  Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
  Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
  Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'

... to make it clearer what the warning is about, and to make it easier
to diff the two versions when syncing up the files.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730093747.qogjn3lp7ntwcgwg@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This adds documentation on the environment variables needed to the
message telling that no conversion support is compiled in.

Committer testing:

  $ make -C tools/perf install
  $ perf data convert --all --to-ctf myctftrace
  No conversion support compiled in. perf should be compiled with environment variables LIBBABELTRACE=1 and LIBBABELTRACE_DIR=/path/to/libbabeltrace/
  $
Signed-off-by: NGeneviève Bastien <gbastien@versatic.net>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-3-gbastien@versatic.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This adds the mmap and mmap2 events to the CTF trace obtained from perf
data.

These events will allow CTF trace visualization tools like Trace Compass
to automatically resolve the symbols of the callchain to the
corresponding function or origin library.

To include those events, one needs to convert with the --all option.
Here follows an output of babeltrace:

  $ sudo perf data convert --all --to-ctf myctftrace
  $ babeltrace ./myctftrace
  [19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 },
 { pid = 638, tid = 638, start = 0x7F54AE39E000, filename =
 "/usr/lib/ld-2.25.so" }
  [19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
 638, tid = 638, start = 0x7F54AE565000, filename =
 "/usr/lib/libudev.so.1.6.6" }
  [19:00:00.000000000] (+0.000000000) perf_mmap2: { cpu_id = 0 }, { pid =
 638, tid = 638, start = 0x7FFC093EA000, filename = "[vdso]" }
Signed-off-by: NGeneviève Bastien <gbastien@versatic.net>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-2-gbastien@versatic.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The field perf_callchain, if available, is added to the sampling events
during the CTF conversion. It is an array of u64 values.  The
perf_callchain_size field contains the size of the array.

It will allow the analysis of sampling data in trace visualization tools
like Trace Compass. Possible analyses with those data: dynamic
flamegraphs, correlation with other tracing data like a userspace trace.

Here follows a babeltrace CTF output of a trace with callchain:

  $ babeltrace ./myctftrace
  [17:38:45.672760285] (+?.?????????) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81063EE4, perf_tid = 25841, perf_pid = 25774, perf_period = 1, perf_callchain_size = 7, perf_callchain = [ [0] = 0xFFFFFFFFFFFFFF80, [1] = 0xFFFFFFFF81063EE4, [2] = 0xFFFFFFFF8100C770, [3] = 0xFFFFFFFF81006EC6, [4] = 0xFFFFFFFF8118245E, [5] = 0xFFFFFFFF810A9224, [6] = 0xFFFFFFFF8164A4C6 ] }
  [17:38:45.672777672] (+0.000017387) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81063EE4, perf_tid = 25841, perf_pid = 25774, perf_period = 1, perf_callchain_size = 8, perf_callchain = [ [0] = 0xFFFFFFFFFFFFFF80, [1] = 0xFFFFFFFF81063EE4, [2] = 0xFFFFFFFF8100C770, [3] = 0xFFFFFFFF81006EC6, [4] = 0xFFFFFFFF8118245E, [5] = 0xFFFFFFFF810A9224, [6] = 0xFFFFFFFF8164A4C6, [7] = 0xFFFFFFFF8164ABAD ] }
  [17:38:45.672786700] (+0.000009028) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81063EE4, perf_tid = 25841, perf_pid = 25774, perf_period = 70, perf_callchain_size = 3, perf_callchain = [ [0] = 0xFFFFFFFFFFFFFF80, [1] = 0xFFFFFFFF81063EE4, [2] = 0xFFFFFFFF8100C770 ] }
Signed-off-by: NGeneviève Bastien <gbastien@versatic.net>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170727181205.24843-1-gbastien@versatic.net
[ Removed PERF_SAMPLE_CALLCHAIN from the TODO list, jolsa ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Either when we start 'perf annotate' or 'perf report' with
--show-total-period or when we, in the annotate browser, press 't' to
toggle period/percent for the first column, we need to adjust the width
for the 'period' case.
Based-on-a-patch-by: NTaeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-n2np5qcs20u6qjdr9orygne6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We have the 't' hotkey to toggle showing either the total period or the
percentage of samples for a given line, but we forgot to toggle as well
the column header, always showing "Percent", even when showing the
period, fix it.
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1501172169-6761-1-git-send-email-treeze.taeung@gmail.com
[ Extracted from a larger patch, s/Event count/Period/g ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In commit f8f4aaea ("perf annotate: Finally display IPC and cycle
accounting") the 'pcnt_width' variable was abused in a few places to
also include the optional width of the "IPC" and "cycles" columns, while
in other places we stopped using 'pcnt_width' and instead its previous
equation...

Now that we need to tap into annotate_browser__pcnt_width() to consider
if --show-total-period is being used and instead of that hardcoded 7
(strlen("Percent")) we need to use it or strlen("Event count") we need
this properly clarified to avoid having to touch all the (7 * nr_events)
places.

Clarify this by introducing a separate annotate_browser__cycles_width()
to leave the pcnt_width calculate just what its name implies.

Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-szgb07t4k5wtvks8nzwkg710@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were showing the number of samples, not the total period, fix it.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 0c4a5bce ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1500500223-16753-1-git-send-email-treeze.taeung@gmail.com
[ extracted from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just paving the way to fix --show-total-period in the TUI, i.e. now
we save in struct disasm_line_samples not just the number of samples,
but also the total period.
Based-on-a-patch-by: NTaeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-1sup5hkwrxocjvrmrmhs732o@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>