This patch adds core support for the Azoteq IQS620A, IQS621, IQS622,
IQS624 and IQS625 multi-function sensors.
Signed-off-by: NJeff LaBundy <jeff@labundy.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.

This codec has integrated SoundWire controller, pin controller and
interrupt controller.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.

"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

MAX77650 MFD driver uses regmap_irq API but doesn't select the required
REGMAP_IRQ option in Kconfig. This can cause the following build error
if regmap irq is not enabled implicitly by someone else:

    ld: drivers/mfd/max77650.o: in function `max77650_i2c_probe':
    max77650.c:(.text+0xcb): undefined reference to `devm_regmap_add_irq_chip'
    ld: max77650.c:(.text+0xdb): undefined reference to `regmap_irq_get_domain'
    make: *** [Makefile:1079: vmlinux] Error 1

Fix it by adding the missing option.

Fixes: d0f60334 ("mfd: Add new driver for MAX77650 PMIC")
Reported-by: NPaul Gazzillo <paul@pgazz.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

BD71828GW is a single-chip power management IC for battery-powered portable
devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
single-cell linear charger. Also included is a Coulomb counter, a real-time
clock (RTC), 3 GPO/regulator control pins, HALL input and a 32.768 kHz
clock gate.

Add MFD core driver providing interrupt controller facilities and i2c
access to sub device drivers.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

SGI IOC3 chip has integrated ethernet, keyboard and mouse interface.
It also supports connecting a SuperIO chip for serial and parallel
interfaces. IOC3 is used inside various SGI systemboards and add-on
cards with different equipped external interfaces.

Support for ethernet and serial interfaces were implemented inside
the network driver. This patchset moves out the not network related
parts to a new MFD driver, which takes care of card detection,
setup of platform devices and interrupt distribution for the subdevices.

Serial portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-for-MFD-by: NLee Jones <lee.jones@linaro.org>
Network part: Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Network part: Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: NPaul Burton <paulburton@kernel.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-serial@vger.kernel.org

The AB8500 GPADC driver is indeed a "general purpose ADC" driver,
and while the IIO subsystem did not exist when the driver was
first merged, it is never too late to clean things up and move it
to the right place.

Nowadays IIO provides the right abstractions and interfaces to
do generic ADC work in the kernel.

We have to cut a bunch of debugfs luggage to make this transition
swift, but all these files to is read out the raw values of the
ADC and the IIO subsystem already has a standard sysfs ABI for
doing exactly this: no debugfs is needed.
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Now that these drivers use the usb localmem pool there is no need to
select DMA_DECLARE_COHERENT.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190903084615.19161-7-hch@lst.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The cros-ec-dev is a multifunction device that now doesn't implement any
chardev communication interface. MFD_CROS_EC_CHARDEV doesn't look
a good name to describe that device and can cause confusion. Hence
rename it to CROS_EC_DEV.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NGwendal Grignou <gwendal@chromium.org>
Tested-by: NGwendal Grignou <gwendal@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NThierry Reding <thierry.reding@gmail.com>
Acked-by: NMark Brown <broonie@kernel.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NGwendal Grignou <gwendal@chromium.org>
Tested-by: NGwendal Grignou <gwendal@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add an MFD driver for Intel Merrifield Basin Cove PMIC.

Firmware on the platforms which are using Basin Cove PMIC is "smarter"
than on the rest supported by vanilla kernel. It handles first level
of interrupt itself, while others do it on OS level.

The driver is done in the same way as the rest of Intel PMIC MFD drivers
in the kernel to support the initial design. The design allows to use
one driver among few PMICs without knowing implementation details of
the each hardware version or generation.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

It has been replaced with the ingenic-iio driver for the ADC.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Tested-by: NArtur Rojek <contact@artur-rojek.eu>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds all the core support and defines for the Cirrus
Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs.

Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: NStuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: NRichard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch adds all the core support and defines for the Cirrus
Logic CS47L15 smart audio CODEC.

Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: NRichard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The RK809 and RK817 are a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
  - Regulators
  - RTC
  - Clocking

Both RK809 and RK817 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.
Most of regulators have a some implementation also.
Signed-off-by: NTony Xie <tony.xie@rock-chips.com>
Acked-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

ROHM BD70528MWV is an ultra-low quiescent current general
purpose single-chip power management IC for battery-powered
portable devices.

Add MFD core which enables chip access for following subdevices:
	- regulators/LED drivers
	- battery-charger
	- gpios
	- 32.768kHz clk
	- RTC
	- watchdog
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add the LM36274 register support to the ti-lmu MFD driver.
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>

Remove support for the LM3697 from the ti-lmu driver in favor
of a dedicated LED driver.
Signed-off-by: NDan Murphy <dmurphy@ti.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: NEnrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

STMicroelectronics Multi-Function eXpander (STMFX) is a slave controller
using I2C for communication with the main MCU. Main features are:
- 16 fast GPIOs individually configurable in input/output
- 8 alternate GPIOs individually configurable in input/output when other
STMFX functions are not used
- Main MCU IDD measurement
- Resistive touchscreen controller
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add the core MFD driver for max77650 PMIC. We define five sub-devices
for which the drivers will be added in subsequent patches.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Since this driver only has a dependency on ARCH_SUNXI just because it
doesn't make any sense to run it on something else, we can definitely
enable it through COMPILE_TEST as well to get some build coverage.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The SOCFPGA System Manager register block aggregates different
peripheral functions into one area.
On 32 bit ARM parts, handle in the same way as syscon.
On 64 bit ARM parts, the System Manager can only be accessed by
EL3 secure mode. Since a SMC call to EL3 is required, this new
driver uses regmaps similar to syscon to handle the SMC call.

Since regmaps abstract out the underlying register access, the
changes to drivers accessing the System Manager are minimal.
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This API is primarily used through DT entries, but two architectures
and two drivers call it directly.  So instead of selecting the config
symbol for random architectures pull it in implicitly for the actual
users.  Also rename the Kconfig option to describe the feature better.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
Acked-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The QMX86 is a PLD present on some TQ-Systems ComExpress modules. It
provides 1 or 2 I2C bus masters, 8 GPIOs and a watchdog timer. Add an
MFD which will instantiate the individual drivers.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Select IRQ_DOMAIN_HIERARCHY for pm8xxx in Kconfig since this driver uses
the version 2 IRQ interfaces. IRQ_DOMAIN_HIERARCHY selects IRQ_DOMAIN,
so it can be removed from here.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Currently the sm501 mfd driver can be compiled without any dependencies,
but through the use of dma_declare_coherent it really depends on
having DMA and iomem support.  Normally we don't explicitly require DMA
support as we have stubs for it if on UML, but in this case the driver
selects support for dma_declare_coherent and thus also requires
memmap support.  Guard this by an explicit dependency.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLee Jones <lee.jones@linaro.org>

Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board. Audio system topology,
clocking and power can all be controlled through the Lochnagar
controller chip, allowing the device under test to be used in
a variety of possible use cases.

As the Lochnagar is a fairly complex device this MFD driver
allows the drivers for the various features to be bound
in. Initially clocking, regulator and pinctrl will be added as
these are necessary to configure the system. But in time at least
audio and voltage/current monitoring will also be added.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

INTEL_SOC_PMIC, INTEL_SOC_PMIC_CHTWC and MFD_TPS68470 select the
I2C_DESIGNWARE_PLATFORM without its dependencies making it possible to see
warning and build error like below:

WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM
  Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y])
  Selected by [y]:
  - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y

/usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_resume':
i2c-designware-platdrv.c:(.text+0x62): undefined reference to `i2c_dw_prepare_clk'
/usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_suspend':
i2c-designware-platdrv.c:(.text+0x9a): undefined reference to `i2c_dw_prepare_clk'
/usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_probe':
i2c-designware-platdrv.c:(.text+0x41c): undefined reference to `i2c_dw_prepare_clk'
/usr/bin/ld: i2c-designware-platdrv.c:(.text+0x438): undefined reference to `i2c_dw_read_comp_param'
/usr/bin/ld: i2c-designware-platdrv.c:(.text+0x545): undefined reference to `i2c_dw_probe'
/usr/bin/ld: i2c-designware-platdrv.c:(.text+0x727): undefined reference to `i2c_dw_probe_slave'

Fix this by making above options to depend on I2C_DESIGNWARE_PLATFORM
being built-in. I2C_DESIGNWARE_PLATFORM is a visible symbol with
dependencies so in general the select should be avoided.

Fixes: acebcff9 ("mfd: intel_soc_pmic: Select designware i2c-bus driver")
Fixes: de85d79f ("mfd: Add Cherry Trail Whiskey Cove PMIC driver")
Fixes: 9bbf6a15 ("mfd: Add support for TPS68470 device")
Cc: Stable <stable@vger.kernel.org> # v4.14+
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The entire way how cros debugfs attibutes are created is broken.
cros_ec_sysfs should be its own driver and its attributes should be
associated with the sysfs driver not the mfd driver.

The patch also adds the sysfs documentation.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NGuenter Roeck <groeck@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

After commit 5d32a665 ("PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set") dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.

WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM
  Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y])
  Selected by [y]:
  - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y

MFD_TPS68470 is an ACPI only device and selects I2C_DESIGNWARE_PLATFORM.

I2C_DESIGNWARE_PLATFORM does not have any configuration today for ACPI
support without CONFIG_PCI set.

For sake of a quick fix this introduces a new mandatory dependency to
the driver which may survive without it. Otherwise we need to revisit
the driver architecture to address this properly.

Fixes: 5d32a665 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: NSinan Kaya <okaya@kernel.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: NPascal Paillet <p.paillet@st.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This prepares the MFD for the STMPE ADC driver. This commit introduces
devicetree settings that are used by the ADC and adds an init function.
Common ADC settings that are shared with the touchscreen driver can now
reside in the overlying MFD.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NMax Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: NPhilippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

It doesn't make sense to present option MFD_AT91_USART by default if
not building an AT91 kernel, as the drivers which depend on it are
not available.

Fixes: 7d3aa342 ("mfd: at91-usart: Add MFD driver for USART")
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The main MFD driver for Samsung PMICs (S2MPSXX, S5M876X) used with
Exynos SoCs can be compiled and used as a module.  The dependent clock,
regulator and RTC drivers already can be built as a module.

Building entire set of drivers as modules might require using initial
ramdisk and can make booting process longer (due to probe deferrals).
However adding such option is useful for testing and for multi-platform
configurations.

This also add required module authors to sec-irq.c file based on recent
main contributors.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The indentation should be a tab followed by two spaces.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This MFD driver is just a wrapper over atmel_serial driver and
spi-at91-usart driver. Selection of one of the drivers is based on a
property from device tree. If the property is not specified, the default
driver is atmel_serial.
Signed-off-by: NRadu Pirea <radu.pirea@microchip.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

ROHM BD71837 PMIC MFD driver providing interrupts and support
for three subsystems:
- clk
- Regulators
- input/power-key
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

There are some cros-ec transport drivers (I2C, SPI) living in MFD, while
others (LPC) living in drivers/platform. The transport drivers are more
platform specific. So, move the I2C and SPI transport drivers to the
platform/chrome directory. The patch also removes the MFD_ prefix of
their Kconfig symbols.
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: NGuenter Roeck <groeck@chromium.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NBenson Leung <bleung@chromium.org>