mfd: intel_soc_pmic: Select designware i2c-bus driver

The Crystal Cove PMIC provides an ACPI OPRegion handler, which must be
available before other drivers using it are loaded, which is why
INTEL_SOC_PMIC is a bool.

Just having the driver is not enough, the driver for the i2c-bus must
also be built in, to ensure this, this patch adds a select for it.

This fixes errors like these during boot:

mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion] (20170119/evregion-166)
ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93543b0cde10), AE_NOT_EXIST (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b0b5cd0), AE_NOT_EXIST (20170119/psparse-543)
acpi 80860F14:02: Failed to change power state to D0

While at it this patch also changes the human readable name of the Kconfig
option to make clear the INTEL_SOC_PMIC option selects support for the
Intel Crystal Cove PMIC and documents why this is a bool.

[The above patch caused a build error on some archetectures]

From: Arnd Bergmann <arnd@arndb.de>

I ran into a build error on ARM with a platform that has a non-standard
clk implementation:

drivers/clk/clk.o: In function `clk_disable':
clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here
drivers/clk/clk.o: In function `clk_enable':
clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here

The problem is a device driver that uses 'select COMMON_CLK', which is
generally a bad idea: selecting a subsystem should only be done from
a platform, otherwise we run into circular dependencies. The same driver
also selects 'GPIOLIB' and 'I2C', which has a similar effect.

This turns all three into 'depends on', as it should be.

Finally, we can limit the build to x86, unless we are compile testing.

First patch:
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Fix for first patch (squashed):
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

drivers/mfd/Kconfig

@@ -448,17 +448,22 @@ config LPC_SCH
 
 config INTEL_SOC_PMIC
 	bool "Support for Crystal Cove PMIC"
-	depends on GPIOLIB
-	depends on I2C=y
+	depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
+	depends on X86 || COMPILE_TEST
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
+	select I2C_DESIGNWARE_PLATFORM if ACPI
 	help
 	  Select this option to enable support for Crystal Cove PMIC
 	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
 	  thermal, charger and related power management functions
 	  on these systems.
 
+	  This option is a bool as it provides an ACPI OpRegion which must be
+	  available before any devices using it are probed. This option also
+	  causes the designware-i2c driver to be builtin for the same reason.
+
 config INTEL_SOC_PMIC_BXTWC
 	tristate "Support for Intel Broxton Whiskey Cove PMIC"
 	depends on INTEL_PMC_IPC