提交 30107fa6 编写于 作者: M Matti Vaittinen 提交者: Lee Jones

mfd: bd71837: Core driver for ROHM BD71837 PMIC

ROHM BD71837 PMIC MFD driver providing interrupts and support
for three subsystems:
- clk
- Regulators
- input/power-key
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
上级 f863ae59
......@@ -1817,6 +1817,19 @@ config MFD_STW481X
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
config MFD_ROHM_BD718XX
tristate "ROHM BD71837 Power Management IC"
depends on I2C=y
depends on OF
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help
Select this option to get support for the ROHM BD71837
Power Management ICs. BD71837 is designed to power processors like
NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring
and emergency shut down as well as 32,768KHz clock output.
config MFD_STM32_LPTIMER
tristate "Support for STM32 Low-Power Timer"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
......
......@@ -239,4 +239,5 @@ obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
// SPDX-License-Identifier: GPL-2.0-or-later
//
// Copyright (C) 2018 ROHM Semiconductors
//
// ROHM BD71837MWV PMIC driver
//
// Datasheet available from
// https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mfd/rohm-bd718x7.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/regmap.h>
/*
* gpio_keys.h requires definiton of bool. It is brought in
* by above includes. Keep this as last until gpio_keys.h gets fixed.
*/
#include <linux/gpio_keys.h>
static const u8 supported_revisions[] = { 0xA2 /* BD71837 */ };
static struct gpio_keys_button button = {
.code = KEY_POWER,
.gpio = -1,
.type = EV_KEY,
};
static struct gpio_keys_platform_data bd718xx_powerkey_data = {
.buttons = &button,
.nbuttons = 1,
.name = "bd718xx-pwrkey",
};
static struct mfd_cell bd71837_mfd_cells[] = {
{
.name = "gpio-keys",
.platform_data = &bd718xx_powerkey_data,
.pdata_size = sizeof(bd718xx_powerkey_data),
},
{ .name = "bd71837-clk", },
{ .name = "bd71837-pmic", },
};
static const struct regmap_irq bd71837_irqs[] = {
REGMAP_IRQ_REG(BD71837_INT_SWRST, 0, BD71837_INT_SWRST_MASK),
REGMAP_IRQ_REG(BD71837_INT_PWRBTN_S, 0, BD71837_INT_PWRBTN_S_MASK),
REGMAP_IRQ_REG(BD71837_INT_PWRBTN_L, 0, BD71837_INT_PWRBTN_L_MASK),
REGMAP_IRQ_REG(BD71837_INT_PWRBTN, 0, BD71837_INT_PWRBTN_MASK),
REGMAP_IRQ_REG(BD71837_INT_WDOG, 0, BD71837_INT_WDOG_MASK),
REGMAP_IRQ_REG(BD71837_INT_ON_REQ, 0, BD71837_INT_ON_REQ_MASK),
REGMAP_IRQ_REG(BD71837_INT_STBY_REQ, 0, BD71837_INT_STBY_REQ_MASK),
};
static struct regmap_irq_chip bd71837_irq_chip = {
.name = "bd71837-irq",
.irqs = bd71837_irqs,
.num_irqs = ARRAY_SIZE(bd71837_irqs),
.num_regs = 1,
.irq_reg_stride = 1,
.status_base = BD71837_REG_IRQ,
.mask_base = BD71837_REG_MIRQ,
.ack_base = BD71837_REG_IRQ,
.init_ack_masked = true,
.mask_invert = false,
};
static const struct regmap_range pmic_status_range = {
.range_min = BD71837_REG_IRQ,
.range_max = BD71837_REG_POW_STATE,
};
static const struct regmap_access_table volatile_regs = {
.yes_ranges = &pmic_status_range,
.n_yes_ranges = 1,
};
static const struct regmap_config bd71837_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.volatile_table = &volatile_regs,
.max_register = BD71837_MAX_REGISTER - 1,
.cache_type = REGCACHE_RBTREE,
};
static int bd71837_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct bd71837 *bd71837;
int ret, i;
unsigned int val;
bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL);
if (!bd71837)
return -ENOMEM;
bd71837->chip_irq = i2c->irq;
if (!bd71837->chip_irq) {
dev_err(&i2c->dev, "No IRQ configured\n");
return -EINVAL;
}
bd71837->dev = &i2c->dev;
dev_set_drvdata(&i2c->dev, bd71837);
bd71837->regmap = devm_regmap_init_i2c(i2c, &bd71837_regmap_config);
if (IS_ERR(bd71837->regmap)) {
dev_err(&i2c->dev, "regmap initialization failed\n");
return PTR_ERR(bd71837->regmap);
}
ret = regmap_read(bd71837->regmap, BD71837_REG_REV, &val);
if (ret) {
dev_err(&i2c->dev, "Read BD71837_REG_DEVICE failed\n");
return ret;
}
for (i = 0; i < ARRAY_SIZE(supported_revisions); i++)
if (supported_revisions[i] == val)
break;
if (i == ARRAY_SIZE(supported_revisions)) {
dev_err(&i2c->dev, "Unsupported chip revision\n");
return -ENODEV;
}
ret = devm_regmap_add_irq_chip(&i2c->dev, bd71837->regmap,
bd71837->chip_irq, IRQF_ONESHOT, 0,
&bd71837_irq_chip, &bd71837->irq_data);
if (ret) {
dev_err(&i2c->dev, "Failed to add irq_chip\n");
return ret;
}
/* Configure short press to 10 milliseconds */
ret = regmap_update_bits(bd71837->regmap,
BD71837_REG_PWRONCONFIG0,
BD718XX_PWRBTN_PRESS_DURATION_MASK,
BD718XX_PWRBTN_SHORT_PRESS_10MS);
if (ret) {
dev_err(&i2c->dev,
"Failed to configure button short press timeout\n");
return ret;
}
/* Configure long press to 10 seconds */
ret = regmap_update_bits(bd71837->regmap,
BD71837_REG_PWRONCONFIG1,
BD718XX_PWRBTN_PRESS_DURATION_MASK,
BD718XX_PWRBTN_LONG_PRESS_10S);
if (ret) {
dev_err(&i2c->dev,
"Failed to configure button long press timeout\n");
return ret;
}
ret = regmap_irq_get_virq(bd71837->irq_data, BD71837_INT_PWRBTN_S);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to get the IRQ\n");
return ret;
}
button.irq = ret;
ret = devm_mfd_add_devices(bd71837->dev, PLATFORM_DEVID_AUTO,
bd71837_mfd_cells,
ARRAY_SIZE(bd71837_mfd_cells), NULL, 0,
regmap_irq_get_domain(bd71837->irq_data));
if (ret)
dev_err(&i2c->dev, "Failed to create subdevices\n");
return ret;
}
static const struct of_device_id bd71837_of_match[] = {
{ .compatible = "rohm,bd71837", },
{ }
};
MODULE_DEVICE_TABLE(of, bd71837_of_match);
static struct i2c_driver bd71837_i2c_driver = {
.driver = {
.name = "rohm-bd718x7",
.of_match_table = bd71837_of_match,
},
.probe = bd71837_i2c_probe,
};
static int __init bd71837_i2c_init(void)
{
return i2c_add_driver(&bd71837_i2c_driver);
}
/* Initialise early so consumer devices can complete system boot */
subsys_initcall(bd71837_i2c_init);
static void __exit bd71837_i2c_exit(void)
{
i2c_del_driver(&bd71837_i2c_driver);
}
module_exit(bd71837_i2c_exit);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("ROHM BD71837 Power Management IC driver");
MODULE_LICENSE("GPL");
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Copyright (C) 2018 ROHM Semiconductors */
#ifndef __LINUX_MFD_BD71837_H__
#define __LINUX_MFD_BD71837_H__
#include <linux/regmap.h>
enum {
BD71837_BUCK1 = 0,
BD71837_BUCK2,
BD71837_BUCK3,
BD71837_BUCK4,
BD71837_BUCK5,
BD71837_BUCK6,
BD71837_BUCK7,
BD71837_BUCK8,
BD71837_LDO1,
BD71837_LDO2,
BD71837_LDO3,
BD71837_LDO4,
BD71837_LDO5,
BD71837_LDO6,
BD71837_LDO7,
BD71837_REGULATOR_CNT,
};
#define BD71837_BUCK1_VOLTAGE_NUM 0x40
#define BD71837_BUCK2_VOLTAGE_NUM 0x40
#define BD71837_BUCK3_VOLTAGE_NUM 0x40
#define BD71837_BUCK4_VOLTAGE_NUM 0x40
#define BD71837_BUCK5_VOLTAGE_NUM 0x08
#define BD71837_BUCK6_VOLTAGE_NUM 0x04
#define BD71837_BUCK7_VOLTAGE_NUM 0x08
#define BD71837_BUCK8_VOLTAGE_NUM 0x40
#define BD71837_LDO1_VOLTAGE_NUM 0x04
#define BD71837_LDO2_VOLTAGE_NUM 0x02
#define BD71837_LDO3_VOLTAGE_NUM 0x10
#define BD71837_LDO4_VOLTAGE_NUM 0x10
#define BD71837_LDO5_VOLTAGE_NUM 0x10
#define BD71837_LDO6_VOLTAGE_NUM 0x10
#define BD71837_LDO7_VOLTAGE_NUM 0x10
enum {
BD71837_REG_REV = 0x00,
BD71837_REG_SWRESET = 0x01,
BD71837_REG_I2C_DEV = 0x02,
BD71837_REG_PWRCTRL0 = 0x03,
BD71837_REG_PWRCTRL1 = 0x04,
BD71837_REG_BUCK1_CTRL = 0x05,
BD71837_REG_BUCK2_CTRL = 0x06,
BD71837_REG_BUCK3_CTRL = 0x07,
BD71837_REG_BUCK4_CTRL = 0x08,
BD71837_REG_BUCK5_CTRL = 0x09,
BD71837_REG_BUCK6_CTRL = 0x0A,
BD71837_REG_BUCK7_CTRL = 0x0B,
BD71837_REG_BUCK8_CTRL = 0x0C,
BD71837_REG_BUCK1_VOLT_RUN = 0x0D,
BD71837_REG_BUCK1_VOLT_IDLE = 0x0E,
BD71837_REG_BUCK1_VOLT_SUSP = 0x0F,
BD71837_REG_BUCK2_VOLT_RUN = 0x10,
BD71837_REG_BUCK2_VOLT_IDLE = 0x11,
BD71837_REG_BUCK3_VOLT_RUN = 0x12,
BD71837_REG_BUCK4_VOLT_RUN = 0x13,
BD71837_REG_BUCK5_VOLT = 0x14,
BD71837_REG_BUCK6_VOLT = 0x15,
BD71837_REG_BUCK7_VOLT = 0x16,
BD71837_REG_BUCK8_VOLT = 0x17,
BD71837_REG_LDO1_VOLT = 0x18,
BD71837_REG_LDO2_VOLT = 0x19,
BD71837_REG_LDO3_VOLT = 0x1A,
BD71837_REG_LDO4_VOLT = 0x1B,
BD71837_REG_LDO5_VOLT = 0x1C,
BD71837_REG_LDO6_VOLT = 0x1D,
BD71837_REG_LDO7_VOLT = 0x1E,
BD71837_REG_TRANS_COND0 = 0x1F,
BD71837_REG_TRANS_COND1 = 0x20,
BD71837_REG_VRFAULTEN = 0x21,
BD71837_REG_MVRFLTMASK0 = 0x22,
BD71837_REG_MVRFLTMASK1 = 0x23,
BD71837_REG_MVRFLTMASK2 = 0x24,
BD71837_REG_RCVCFG = 0x25,
BD71837_REG_RCVNUM = 0x26,
BD71837_REG_PWRONCONFIG0 = 0x27,
BD71837_REG_PWRONCONFIG1 = 0x28,
BD71837_REG_RESETSRC = 0x29,
BD71837_REG_MIRQ = 0x2A,
BD71837_REG_IRQ = 0x2B,
BD71837_REG_IN_MON = 0x2C,
BD71837_REG_POW_STATE = 0x2D,
BD71837_REG_OUT32K = 0x2E,
BD71837_REG_REGLOCK = 0x2F,
BD71837_REG_OTPVER = 0xFF,
BD71837_MAX_REGISTER = 0x100,
};
#define REGLOCK_PWRSEQ 0x1
#define REGLOCK_VREG 0x10
/* Generic BUCK control masks */
#define BD71837_BUCK_SEL 0x02
#define BD71837_BUCK_EN 0x01
#define BD71837_BUCK_RUN_ON 0x04
/* Generic LDO masks */
#define BD71837_LDO_SEL 0x80
#define BD71837_LDO_EN 0x40
/* BD71837 BUCK ramp rate CTRL reg bits */
#define BUCK_RAMPRATE_MASK 0xC0
#define BUCK_RAMPRATE_10P00MV 0x0
#define BUCK_RAMPRATE_5P00MV 0x1
#define BUCK_RAMPRATE_2P50MV 0x2
#define BUCK_RAMPRATE_1P25MV 0x3
/* BD71837_REG_BUCK1_VOLT_RUN bits */
#define BUCK1_RUN_MASK 0x3F
#define BUCK1_RUN_DEFAULT 0x14
/* BD71837_REG_BUCK1_VOLT_SUSP bits */
#define BUCK1_SUSP_MASK 0x3F
#define BUCK1_SUSP_DEFAULT 0x14
/* BD71837_REG_BUCK1_VOLT_IDLE bits */
#define BUCK1_IDLE_MASK 0x3F
#define BUCK1_IDLE_DEFAULT 0x14
/* BD71837_REG_BUCK2_VOLT_RUN bits */
#define BUCK2_RUN_MASK 0x3F
#define BUCK2_RUN_DEFAULT 0x1E
/* BD71837_REG_BUCK2_VOLT_IDLE bits */
#define BUCK2_IDLE_MASK 0x3F
#define BUCK2_IDLE_DEFAULT 0x14
/* BD71837_REG_BUCK3_VOLT_RUN bits */
#define BUCK3_RUN_MASK 0x3F
#define BUCK3_RUN_DEFAULT 0x1E
/* BD71837_REG_BUCK4_VOLT_RUN bits */
#define BUCK4_RUN_MASK 0x3F
#define BUCK4_RUN_DEFAULT 0x1E
/* BD71837_REG_BUCK5_VOLT bits */
#define BUCK5_MASK 0x07
#define BUCK5_DEFAULT 0x02
/* BD71837_REG_BUCK6_VOLT bits */
#define BUCK6_MASK 0x03
#define BUCK6_DEFAULT 0x03
/* BD71837_REG_BUCK7_VOLT bits */
#define BUCK7_MASK 0x07
#define BUCK7_DEFAULT 0x03
/* BD71837_REG_BUCK8_VOLT bits */
#define BUCK8_MASK 0x3F
#define BUCK8_DEFAULT 0x1E
/* BD71837_REG_IRQ bits */
#define IRQ_SWRST 0x40
#define IRQ_PWRON_S 0x20
#define IRQ_PWRON_L 0x10
#define IRQ_PWRON 0x08
#define IRQ_WDOG 0x04
#define IRQ_ON_REQ 0x02
#define IRQ_STBY_REQ 0x01
/* BD71837_REG_OUT32K bits */
#define BD71837_OUT32K_EN 0x01
/* BD71837 gated clock rate */
#define BD71837_CLK_RATE 32768
/* ROHM BD71837 irqs */
enum {
BD71837_INT_STBY_REQ,
BD71837_INT_ON_REQ,
BD71837_INT_WDOG,
BD71837_INT_PWRBTN,
BD71837_INT_PWRBTN_L,
BD71837_INT_PWRBTN_S,
BD71837_INT_SWRST
};
/* ROHM BD71837 interrupt masks */
#define BD71837_INT_SWRST_MASK 0x40
#define BD71837_INT_PWRBTN_S_MASK 0x20
#define BD71837_INT_PWRBTN_L_MASK 0x10
#define BD71837_INT_PWRBTN_MASK 0x8
#define BD71837_INT_WDOG_MASK 0x4
#define BD71837_INT_ON_REQ_MASK 0x2
#define BD71837_INT_STBY_REQ_MASK 0x1
/* BD71837_REG_LDO1_VOLT bits */
#define LDO1_MASK 0x03
/* BD71837_REG_LDO1_VOLT bits */
#define LDO2_MASK 0x20
/* BD71837_REG_LDO3_VOLT bits */
#define LDO3_MASK 0x0F
/* BD71837_REG_LDO4_VOLT bits */
#define LDO4_MASK 0x0F
/* BD71837_REG_LDO5_VOLT bits */
#define LDO5_MASK 0x0F
/* BD71837_REG_LDO6_VOLT bits */
#define LDO6_MASK 0x0F
/* BD71837_REG_LDO7_VOLT bits */
#define LDO7_MASK 0x0F
/* Register write induced reset settings */
/*
* Even though the bit zero is not SWRESET type we still want to write zero
* to it when changing type. Bit zero is 'SWRESET' trigger bit and if we
* write 1 to it we will trigger the action. So always write 0 to it when
* changning SWRESET action - no matter what we read from it.
*/
#define BD71837_SWRESET_TYPE_MASK 7
#define BD71837_SWRESET_TYPE_DISABLED 0
#define BD71837_SWRESET_TYPE_COLD 4
#define BD71837_SWRESET_TYPE_WARM 6
#define BD71837_SWRESET_RESET_MASK 1
#define BD71837_SWRESET_RESET 1
/* Poweroff state transition conditions */
#define BD718XX_ON_REQ_POWEROFF_MASK 1
#define BD718XX_SWRESET_POWEROFF_MASK 2
#define BD718XX_WDOG_POWEROFF_MASK 4
#define BD718XX_KEY_L_POWEROFF_MASK 8
#define BD718XX_POWOFF_TO_SNVS 0
#define BD718XX_POWOFF_TO_RDY 0xF
#define BD718XX_POWOFF_TIME_MASK 0xF0
enum {
BD718XX_POWOFF_TIME_5MS = 0,
BD718XX_POWOFF_TIME_10MS,
BD718XX_POWOFF_TIME_15MS,
BD718XX_POWOFF_TIME_20MS,
BD718XX_POWOFF_TIME_25MS,
BD718XX_POWOFF_TIME_30MS,
BD718XX_POWOFF_TIME_35MS,
BD718XX_POWOFF_TIME_40MS,
BD718XX_POWOFF_TIME_45MS,
BD718XX_POWOFF_TIME_50MS,
BD718XX_POWOFF_TIME_75MS,
BD718XX_POWOFF_TIME_100MS,
BD718XX_POWOFF_TIME_250MS,
BD718XX_POWOFF_TIME_500MS,
BD718XX_POWOFF_TIME_750MS,
BD718XX_POWOFF_TIME_1500MS
};
/* Poweron sequence state transition conditions */
#define BD718XX_RDY_TO_SNVS_MASK 0xF
#define BD718XX_SNVS_TO_RUN_MASK 0xF0
#define BD718XX_PWR_TRIG_KEY_L 1
#define BD718XX_PWR_TRIG_KEY_S 2
#define BD718XX_PWR_TRIG_PMIC_ON 4
#define BD718XX_PWR_TRIG_VSYS_UVLO 8
#define BD718XX_RDY_TO_SNVS_SIFT 0
#define BD718XX_SNVS_TO_RUN_SIFT 4
#define BD718XX_PWRBTN_PRESS_DURATION_MASK 0xF
/* Timeout value for detecting short press */
enum {
BD718XX_PWRBTN_SHORT_PRESS_10MS = 0,
BD718XX_PWRBTN_SHORT_PRESS_500MS,
BD718XX_PWRBTN_SHORT_PRESS_1000MS,
BD718XX_PWRBTN_SHORT_PRESS_1500MS,
BD718XX_PWRBTN_SHORT_PRESS_2000MS,
BD718XX_PWRBTN_SHORT_PRESS_2500MS,
BD718XX_PWRBTN_SHORT_PRESS_3000MS,
BD718XX_PWRBTN_SHORT_PRESS_3500MS,
BD718XX_PWRBTN_SHORT_PRESS_4000MS,
BD718XX_PWRBTN_SHORT_PRESS_4500MS,
BD718XX_PWRBTN_SHORT_PRESS_5000MS,
BD718XX_PWRBTN_SHORT_PRESS_5500MS,
BD718XX_PWRBTN_SHORT_PRESS_6000MS,
BD718XX_PWRBTN_SHORT_PRESS_6500MS,
BD718XX_PWRBTN_SHORT_PRESS_7000MS,
BD718XX_PWRBTN_SHORT_PRESS_7500MS
};
/* Timeout value for detecting LONG press */
enum {
BD718XX_PWRBTN_LONG_PRESS_10MS = 0,
BD718XX_PWRBTN_LONG_PRESS_1S,
BD718XX_PWRBTN_LONG_PRESS_2S,
BD718XX_PWRBTN_LONG_PRESS_3S,
BD718XX_PWRBTN_LONG_PRESS_4S,
BD718XX_PWRBTN_LONG_PRESS_5S,
BD718XX_PWRBTN_LONG_PRESS_6S,
BD718XX_PWRBTN_LONG_PRESS_7S,
BD718XX_PWRBTN_LONG_PRESS_8S,
BD718XX_PWRBTN_LONG_PRESS_9S,
BD718XX_PWRBTN_LONG_PRESS_10S,
BD718XX_PWRBTN_LONG_PRESS_11S,
BD718XX_PWRBTN_LONG_PRESS_12S,
BD718XX_PWRBTN_LONG_PRESS_13S,
BD718XX_PWRBTN_LONG_PRESS_14S,
BD718XX_PWRBTN_LONG_PRESS_15S
};
struct bd71837_pmic;
struct bd71837_clk;
struct bd71837 {
struct device *dev;
struct regmap *regmap;
unsigned long int id;
int chip_irq;
struct regmap_irq_chip_data *irq_data;
struct bd71837_pmic *pmic;
struct bd71837_clk *clk;
};
#endif /* __LINUX_MFD_BD71837_H__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册