We can move this to patch up as well. Shuffle the relevant includes as we
go
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In particular don't destroy static mutexes, it upsets things
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This again is similar to upstream so give it a sensible name ready to look
at any merging or synchronization
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move this over. In actual fact there are some underlying differences as
some devices have more MMU contexts, but for our 2D purposes we don't
actually care.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We've now sorted them out so they can go into the generic code. In actual
fact only the non MID devices use the functions but they are small and
having the name match i915 is going to help any future merging type work.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is leaking an io mapping and also referencing stuff directly that
should not be directly accessed. Sort it out
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is generic for the PC class devices and also very similar to the i915
intel_bios.c so rename it. That way the commonality will be obvious and we
can look at merging them one day, or at least synching them up.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't want to carry all the extra gunk around on every device so use the
splitting work so far to tidy this up. Poulsbo is still mandatory as it is
used in bits by the other drivers and not neatly modularised.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rename the gem and gtt files accordingly.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rename
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The framebuffer code is now clean of device specific code, and passes
checkpatch. Move it to its new name
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Shuffle the naming so this reflects better and we can try and build some
sort of ordering to the naming scheme.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We can stuff things like the number of pipes and the SGX offset away in
here as well and clean up more conditional code.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a Medfield only path
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Split the 2d properties, name, and various function vectors out so that we
can get rid of more conditional gloop in favour of a per device structure.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Missed in the original merge work
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We need to initialise the DBI interface and the code for it got missed in
the original merge as it's in a daft place. This will need moving but lets
get it added first.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Next obvious target - backlight support
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We really want to move towards a completely abstracted interface rather
than having tons of per chip junk in the same files.

Begin with the power code which is probably the worst offender. Add a set
of methods, initialise a dev_priv->ops pointer and rip the chip specifics
out of the power code. While we are it pick up the display init bits.

So we know it's now chip specifics clean remove the psb_ naming from it.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We also pull out the undo side of the mmap offset processing so we can later
push it into GEM where it belongs
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Eliminate unused stuff and clean up the code ordering.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is too big already so lets rip out more of the device specific crud. It
also means we pull the ugly stuff that needs work out of our main line of
cleanup.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This large patch adds all the basics for Medfield support. Lots of clean up
needed in this area still.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Tidy up the 2D bits. For the fill case the CPU seems to be able to
outperform the graphics engine for the cases we get, so don't bother
fixing it but throw it out.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Start the style cleanup
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We can now make our system frame buffer a GEM object.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add this temporarily so we can keep making progress and also bundle all the
GEM bits we need together in our staging driver while we get them into GEM
itself.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We are using the underlying kref in the GEM object so we don't need our own
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lose all the PSB debug gunge. We can replace it with dev_dbg() like normal
drivers if and when we need debug on stuff.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't seem to need this for our task.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We have a FIXME to do the power management for which the framework now
exists, and we also need to deal with an erratum. Some operations exactly 8
pixels wide or high fail. The work around is to do two smaller ones (see
the Intel released X driver bits) but for console quite frankly if it's
8bits wide and/or high its not worth it so fall back.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Give the driver its own proper DRM name, clean up copyright headers and so
forth
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we get a user frame buffer destroyed which is being displayed then clean
up the mess nicely. We can now run a slightly modified modetest including setting
modes, and handling crashes.

Modetest still blows up but this is because libdrm 2.4.25 is busted.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Restructure this to work the same way as the i915 frame buffer does. That
cleans up various chunks of code.

We can now set a mode in modetest but mode restore is a bit iffy
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>