提交 0bbfa259 编写于 作者: A Alan Cox 提交者: Greg Kroah-Hartman

gma500: begin the config based split

We don't want to carry all the extra gunk around on every device so use the
splitting work so far to tidy this up. Poulsbo is still mandatory as it is
used in bits by the other drivers and not neatly modularised.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 63e21a5b
config DRM_PSB
tristate "Intel GMA500 KMS Framebuffer"
tristate "Intel GMA5/600 KMS Framebuffer"
depends on DRM && PCI && X86
select FB_CFB_COPYAREA
select FB_CFB_FILLRECT
......@@ -7,6 +7,27 @@ config DRM_PSB
select DRM_KMS_HELPER
select DRM_TTM
help
Say yes for an experimental KMS framebuffer driver for the
Intel GMA500 ('Poulsbo') graphics support.
Say yes for an experimental 2D KMS framebuffer driver for the
Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
devices.
config DRM_PSB_MRST
bool "Intel GMA600 support (Experimental)"
depends on DRM_PSB
help
Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
platforms with LVDS ports. HDMI and MIPI are not currently
supported.
config DRM_PSB_MFLD
bool "Intel Medfield support (Experimental)"
depends on DRM_PSB
help
Say yes to include support for Intel Medfield platforms with MIPI
interfaces.
config DRM_PSB_CDV
bool "Intel Cedarview support (Experimental)"
depends on DRM_PSB
help
Say yes to include support for Intel Cedarview platforms
......@@ -22,12 +22,15 @@ psb_gfx-y += gem_glue.o \
psb_mmu.o \
psb_irq.o \
psb_device.o \
cdv_device.o \
mid_bios.o \
mrst_device.o \
mid_bios.o
psb_gfx-$(CONFIG_DRM_PSB_CDV) += cdv_device.o
psb_gfx-$(CONFIG_DRM_PSB_MRST) += mrst_device.o \
mrst_crtc.o \
mrst_lvds.o \
mdfld_device.o \
mrst_lvds.o
psb_gfx-$(CONFIG_DRM_PSB_MFLD) += mdfld_device.o \
mdfld_output.o \
mdfld_pyr_cmd.o \
mdfld_tmd_vid.o \
......
......@@ -52,6 +52,7 @@ module_param_named(trap_pagefaults, drm_psb_trap_pagefaults, int, 0600);
static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
{ 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
{ 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
#if defined(CONFIG_DRM_PSB_MRST)
{ 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
{ 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
{ 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
......@@ -60,6 +61,8 @@ static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
{ 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
{ 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
{ 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
#endif
#if defined(CONFIG_DRM_PSB_MFLD)
{ 0x8086, 0x0130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
{ 0x8086, 0x0131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
{ 0x8086, 0x0132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
......@@ -68,6 +71,8 @@ static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
{ 0x8086, 0x0135, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
{ 0x8086, 0x0136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
{ 0x8086, 0x0137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
#endif
#if defined(CONFIG_DRM_PSB_CDV)
{ 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
{ 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
{ 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
......@@ -76,6 +81,7 @@ static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
{ 0x8086, 0x0be5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
{ 0x8086, 0x0be6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
{ 0x8086, 0x0be7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
#endif
{ 0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, pciidlist);
......@@ -396,6 +402,7 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
dev->driver->get_vblank_counter = psb_get_vblank_counter;
#if defined(CONFIG_DRM_PSB_MFLD)
/* FIXME: this is not the right place for this stuff ! */
if (IS_MFLD(dev)) {
#ifdef CONFIG_MDFLD_DSI_DPU
......@@ -406,7 +413,7 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
#endif /*CONFIG_MDFLD_DSI_DPU*/
/* INIT_WORK(&dev_priv->te_work, mdfld_te_handler_work);*/
}
#endif
if (drm_psb_no_fb == 0) {
psb_modeset_init(dev);
psb_fbdev_init(dev);
......
......@@ -455,11 +455,12 @@ int psb_enable_vblank(struct drm_device *dev, int pipe)
uint32_t reg_val = 0;
uint32_t pipeconf_reg = mid_pipeconf(pipe);
#if defined(CONFIG_DRM_PSB_MFLD)
/* Medfield is different - we should perhaps extract out vblank
and blacklight etc ops */
if (IS_MFLD(dev) && !mdfld_panel_dpi(dev))
return mdfld_enable_te(dev, pipe);
#endif
if (gma_power_begin(dev, false)) {
reg_val = REG_READ(pipeconf_reg);
gma_power_end(dev);
......@@ -486,8 +487,10 @@ void psb_disable_vblank(struct drm_device *dev, int pipe)
struct drm_psb_private *dev_priv = dev->dev_private;
unsigned long irqflags;
#if defined(CONFIG_DRM_PSB_MFLD)
if (IS_MFLD(dev) && !mdfld_panel_dpi(dev))
mdfld_disable_te(dev, pipe);
#endif
spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
mid_disable_pipe_event(dev_priv, pipe);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册