gma500: Add the beginnings of Cedarview support

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/gma500/Makefile

@@ -22,6 +22,7 @@ psb_gfx-y += gem_glue.o \
 	  psb_mmu.o \
 	  psb_irq.o \
 	  psb_device.o \
+	  cdv_device.o \
 	  mrst_device.o \
 	  mrst_crtc.o \
 	  mrst_lvds.o \

drivers/staging/gma500/cdv_device.c

+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_bios.h"
+
+
+static int cdv_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	psb_intel_lvds_init(dev, &dev_priv->mode_dev);
+	psb_intel_sdvo_init(dev, SDVOB);
+	return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ *	Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR    10
+#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+
+static int cdv_brightness;
+static struct backlight_device *cdv_backlight_device;
+
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return cdv_brightness;
+}
+
+
+static int cdv_backlight_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	/* u32 bl_max_freq; */
+	/* unsigned long value; */
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	/* get bl_max_freq and pol from dev_priv*/
+	if (!dev_priv->lvds_bl) {
+		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+		return -ENOENT;
+	}
+	bl_max_freq = dev_priv->lvds_bl->freq;
+	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+				return -ERANGE;
+	else {
+		/* FIXME */
+	}
+	return 0;
+}
+
+static int cdv_set_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(cdv_backlight_device);
+	int level = bd->props.brightness;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
+	cdv_brightness = level;
+	return 0;
+}
+
+static const struct backlight_ops cdv_ops = {
+	.get_brightness = cdv_get_brightness,
+	.update_status  = cdv_set_brightness,
+};
+
+static int cdv_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	cdv_backlight_device = backlight_device_register("psb-bl",
+					NULL, (void *)dev, &cdv_ops, &props);
+	if (IS_ERR(cdv_backlight_device))
+		return PTR_ERR(cdv_backlight_device);
+
+	ret = cdv_backlight_setup(dev);
+	if (ret < 0) {
+		backlight_device_unregister(cdv_backlight_device);
+		cdv_backlight_device = NULL;
+		return ret;
+	}
+	cdv_backlight_device->props.brightness = 100;
+	cdv_backlight_device->props.max_brightness = 100;
+	backlight_update_status(cdv_backlight_device);
+	dev_priv->backlight_device = cdv_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Poulsbo specific chip logic and low level methods
+ *	for power management
+ */
+
+static void cdv_init_pm(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
+	gating &= ~3;	/* Disable 2D clock gating */
+	gating |= 1;
+	PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
+	PSB_RSGX32(PSB_CR_CLKGATECTL);
+}
+
+/**
+ *	cdv_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ */
+static int cdv_save_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+
+	/* Display arbitration control + watermarks */
+	dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
+	dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
+	dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
+	dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
+	dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
+	dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
+	dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
+	dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+	/* Save crtc and output state */
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (drm_helper_crtc_in_use(crtc))
+			crtc->funcs->save(crtc);
+	}
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		connector->funcs->save(connector);
+
+	mutex_unlock(&dev->mode_config.mutex);
+	return 0;
+}
+
+/**
+ *	cdv_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ */
+static int cdv_restore_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+	int pp_stat;
+
+	/* Display arbitration + watermarks */
+	PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
+	PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
+	PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
+	PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
+	PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
+	PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
+	PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
+	PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
+
+	/*make sure VGA plane is off. it initializes to on after reset!*/
+	PSB_WVDC32(0x80000000, VGACNTRL);
+
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		if (drm_helper_crtc_in_use(crtc))
+			crtc->funcs->restore(crtc);
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		connector->funcs->restore(connector);
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	if (dev_priv->iLVDS_enable) {
+		/*shutdown the panel*/
+		PSB_WVDC32(0, PP_CONTROL);
+		do {
+			pp_stat = PSB_RVDC32(PP_STATUS);
+		} while (pp_stat & 0x80000000);
+
+		/* Turn off the plane */
+		PSB_WVDC32(0x58000000, DSPACNTR);
+		PSB_WVDC32(0, DSPASURF);/*trigger the plane disable*/
+		/* Wait ~4 ticks */
+		msleep(4);
+		/* Turn off pipe */
+		PSB_WVDC32(0x0, PIPEACONF);
+		/* Wait ~8 ticks */
+		msleep(8);
+
+		/* Turn off PLLs */
+		PSB_WVDC32(0, MRST_DPLL_A);
+	} else {
+		PSB_WVDC32(DPI_SHUT_DOWN, DPI_CONTROL_REG);
+		PSB_WVDC32(0x0, PIPEACONF);
+		PSB_WVDC32(0x2faf0000, BLC_PWM_CTL);
+		while (REG_READ(0x70008) & 0x40000000)
+			cpu_relax();
+		while ((PSB_RVDC32(GEN_FIFO_STAT_REG) & DPI_FIFO_EMPTY)
+			!= DPI_FIFO_EMPTY)
+			cpu_relax();
+		PSB_WVDC32(0, DEVICE_READY_REG);
+	}
+	return 0;
+}
+
+static int cdv_power_down(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_up(struct drm_device *dev)
+{
+	return 0;
+}
+
+/* FIXME ? - shared with Poulsbo */
+static void cdv_get_core_freq(struct drm_device *dev)
+{
+	uint32_t clock;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	/*pci_write_config_dword(pci_root, 0xD4, 0x00C32004);*/
+	/*pci_write_config_dword(pci_root, 0xD0, 0xE0033000);*/
+
+	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+	pci_read_config_dword(pci_root, 0xD4, &clock);
+	pci_dev_put(pci_root);
+
+	switch (clock & 0x07) {
+	case 0:
+		dev_priv->core_freq = 100;
+		break;
+	case 1:
+		dev_priv->core_freq = 133;
+		break;
+	case 2:
+		dev_priv->core_freq = 150;
+		break;
+	case 3:
+		dev_priv->core_freq = 178;
+		break;
+	case 4:
+		dev_priv->core_freq = 200;
+		break;
+	case 5:
+	case 6:
+	case 7:
+		dev_priv->core_freq = 266;
+	default:
+		dev_priv->core_freq = 0;
+	}
+}
+
+static int cdv_chip_setup(struct drm_device *dev)
+{
+	cdv_get_core_freq(dev);
+	psb_intel_opregion_init(dev);
+	psb_intel_init_bios(dev);
+	return 0;
+}
+
+/* CDV is much like Poulsbo but has MID like SGX offsets */
+
+const struct psb_ops cdv_chip_ops = {
+	.name = "Cedartrail",
+	.accel_2d = 0,
+	.pipes = 2,
+	.sgx_offset = MRST_SGX_OFFSET,
+	.chip_setup = cdv_chip_setup,
+
+	.crtc_helper = &psb_intel_helper_funcs,
+	.crtc_funcs = &psb_intel_crtc_funcs,
+
+	.output_init = cdv_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = cdv_backlight_init,
+#endif
+
+	.init_pm = cdv_init_pm,
+	.save_regs = cdv_save_display_registers,
+	.restore_regs = cdv_restore_display_registers,
+	.power_down = cdv_power_down,
+	.power_up = cdv_power_up,	
+};
+

drivers/staging/gma500/psb_drv.c

@@ -68,6 +68,14 @@ static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
 	{ 0x8086, 0x0135, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
 	{ 0x8086, 0x0136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
 	{ 0x8086, 0x0137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+	{ 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
+	{ 0x8086, 0x0be7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops},
 	{ 0, 0, 0}
 };
 MODULE_DEVICE_TABLE(pci, pciidlist);

drivers/staging/gma500/psb_drv.h

@@ -804,6 +804,9 @@ extern const struct psb_ops mrst_chip_ops;
 /* mdfld_device.c */
 extern const struct psb_ops mdfld_chip_ops;
 
+/* cdv_device.c */
+extern const struct psb_ops cdv_chip_ops;
+
 /*
  * Debug print bits setting
  */