“9a997188ff7ab2110c6fefa85977d1aa8005ae77”上不存在“git@gitcode.net:openeuler/kernel.git”
- 12 4月, 2012 3 次提交
-
-
由 Luciano Coelho 提交于
Add register tables support in wlcore, add some new IO functions to read and write to chip-specific register and data addresses. Move some common register values from wl12xx to wlcore and add the registers table to wl12xx. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Rename the wl12xx driver directory to wlcore as an initial step towards the split of the driver into wlcore and wl12xx. We just rename the directory first to keep git blame happy. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti directory. Add a TI WLAN Kconfig option and Makefile to support this change. Signed-off-by: NLuciano Coelho <coelho@ti.com> Cc: John W. Linville <linville@tuxdriver.com>
-
- 15 2月, 2012 3 次提交
-
-
由 Ido Reis 提交于
Increase max scan IEs to allow big probe-req frames Report a correct max-length for the scan IEs we can support, according to the now larger size of the probe-req template. Signed-off-by: NIdo Reis <idor@ti.com> Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
When configuring the arp response template, and encryption is enabled, we should add some space and set the protected flag bit in the fc. In order to track the encryption type, set wlvif->encryption_type when setting an encryption key, and reconfigure the arp response. Clear this field on wl1271_join, as keys have to be re-configured anyway after a join command. Similarly, track whether QoS is configured. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
The set_template commands now takes the role_id as parameter. Usually, we'll use the vif's main role_id. However, sometimes we'll want to use wlvif->dev_role_id instead of wlvif->role_id, so pass the wanted role_id as param. Update WL127X_FW_NAME/WL128X_FW_NAME. (This commit starts a series of fw update patches, and changes the start() callback to return an error in order to prevent the use of the driver during the transition. This change will be reverted in the last patch of series) Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 15 12月, 2011 2 次提交
-
-
由 Luciano Coelho 提交于
The ACX_PD_THRESHOLD configuration command is deprecated and should not be used anymore. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Luciano Coelho 提交于
We need to set the extended radio parameters for wl127x only. Currently, we were only calling this command with wl127x STA mode, but we should also do it for AP mode. Move the call to the extended radio paramaters to the common hw_init and use a single if for the chip type to do everything at once. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 01 12月, 2011 1 次提交
-
-
由 Eliad Peller 提交于
The keep alive template should have a max size of sizeof(struct ieee80211_qos_hdr). Additionally, Remove the redundant wl12xx_qos_null_data_template struct. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 08 11月, 2011 2 次提交
-
-
由 Luciano Coelho 提交于
SDIO blocksize alignment support is now the rule, not the exception. To simplify the code in patches to come, invert the meaning of the quirk to be negative (ie. the quirk is set if the device does _not_ support blocksize alignment). Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Enable beacon filtering on STA init, and don't disable it when entering active mode. Otherwise dynamic-PS supports means we receive beacons from the current AP during any Tx/Rx performed by the driver. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 11 10月, 2011 4 次提交
-
-
由 Luciano Coelho 提交于
Separate the debugging macros and other definitions to a new debug.h file. This is be needed because the sdio and spi modules don't need to depend on the wl12xx module anymore, but still need to include wl12xx.h. Currently they do depend on it, because of the debugging global that wl12xx exports. A future patch will remove this dependency. Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
allocate the rate policies dynamically, instead of using hardcoded indexes. this is needed for proper multi-role configuration. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
move power_level into the per-interface data. mac80211 configures some values (e.g. band, channel) globally, while we configure them per-interface. In order to make it easier to keep track of the configured value for each value while keeping sync with mac80211, save these values both globally and per-vif. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
If there is an active AP role, stay always on. Otherwise, allow chip to enter elp. (Note that this is a global configuration, so if the device is already configured according to our policy, we don't have to configure it again) Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 07 10月, 2011 8 次提交
-
-
由 Eliad Peller 提交于
move ba_fields into the per-interface data, rather than being global. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
move role_id into the per-interface data, rather than being global. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
move bss_type into the per-interface data, rather than being global. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
move basic_rate into the per-interface data, rather than being global. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
move rate_set into the per-interface data, rather than being global. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Define a per-vif data struct. This struct holds all the vif-specifc data, which is currently being hold by the global wl struct. Start by moving the basic_rate_set field into it. NOTE: in order to make the patches a bit smaller, start by using wl->vif in some functions, instead of changing all the function prototypes at once. finally, wl->vif will be removed altogether. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Split the init sequence into common commands (non role-specific) and role-specific commands. We still need to call the common commands only on add_interface() (rather than on start()) as the fw must get the mac address when uploading the nvs. Future patches will refactor the init sequence further more. Signed-off-by: NEliad Peller <eliad@wizery.com> [fixed a couple of sparse warnings] Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
The mac address of the interface already exists in vif->addr. Use it instead of wl->mac_addr. It seems that due to some fw bug, we still need to set nvs->mac to the actual mac addresss, otherwise the fw doesn't function well (e.g. can't get dhcp address). Thus, use wl->mac_addr for this purpose, and don't delete it yet. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 23 9月, 2011 1 次提交
-
-
由 Eliad Peller 提交于
Save the configured bitrate, and use the min allowed rate as the basic rate (e.g. when scanning). Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 14 9月, 2011 1 次提交
-
-
由 Eliad Peller 提交于
Add wl12xx_acx_config_hangover() and respective conf values. This command configures how long the chip will stay awake after it was configured to enter psm. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 22 8月, 2011 9 次提交
-
-
由 Arik Nemtsov 提交于
Unconditionally configure HT rate support to the FW on all ACs when starting the AP. When 11n support is disabled by usermode (hostapd), each STA joining the AP will appear as a non-HT STA. This will stop us from accidentally transmitting using MCS rates. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
Incorporate interface changes for HT support. Add ba_bitmap field to the wl1271_link struct, to indicate activate RX BA sessions (for AP mode). Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
The BT coex params api have been changed. Update it, and init coex for both sta and ap. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Configure rate management parameters on hw init Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Use ACX_BEACON_FILTER_OPT for both station and ap roles (use the generic wl1271_acx_beacon_filter_opt() instead of wl1271_acx_set_ap_beacon_filter() ). Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
The max template size was increased in the new fw. However, we should use the max size only when needed, as it consumes some of the chip's memory. Thus, by default initialize the templates to the default size. Initialize to the maximum size only when required. Use WL1271_CMD_TEMPL_DFLT_SIZE instead of some of the predefined structs, as some of them didn't account for additional IEs that might be added to the template. Delete structs defintions not used after these changes. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Change the commands and events according to the new fw api (fw >= 6/7.3.0.0.75). The main change is the replacement of JOIN/DISCONNECT commands, with ROLE_START/ROLE_STOP commands. The use of these commands should be preceded by the ROLE_ENABLE command (allocating role resources), and followed by the ROLE_DISABLE command (freeing role resources). Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
Update the acx commands according to the new fw api (fw >= 6/7.3.0.0.75). The main change in most of the ACXs is the addition of a new role_id/link_id field, which is required for multi-role operation. Currently, we don't really support multi-role, as most of our data (inside wl) is global. As the current fw doesn't support concurrent roles yet, keep it this way and add wl->role_id and wl->sta_hlid to save the active role/link. Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Eliad Peller 提交于
The new fw doesn't support rx_filtering configuration (as a stand-alone command. the rx filtering is done automatically according to the active role). Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 06 7月, 2011 2 次提交
-
-
由 Arik Nemtsov 提交于
Sometimes we only get the Tx power level via op->config when the FW is off. Record the received power level when this happens and use it to initialize the firmware during boot. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
由 Arik Nemtsov 提交于
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 27 6月, 2011 1 次提交
-
-
由 Ido Yariv 提交于
A recently added feature to the firmware enables the driver to retrieve firmware logs via the host bus (SDIO or SPI). There are two modes of operation: 1. On-demand: The FW collects its log in an internal ring buffer. This buffer can later be read, for example, upon recovery. 2. Continuous: The FW pushes the FW logs as special packets in the RX path. Reading the internal ring buffer does not involve the FW. Thus, as long as the HW is not in ELP, it should be possible to read the logs, even if the FW crashes. A sysfs binary file named "fwlog" was added to support this feature, letting a monitor process read the FW messages. The log is transferred from the FW only when available, so the reading process might block. Signed-off-by: NIdo Yariv <ido@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-
- 08 6月, 2011 1 次提交
-
-
由 Shahar Levi 提交于
Adding new event that close RX BA session in case of periodic BT activity limiting WLAN activity. Signed-off-by: NShahar Levi <shahar_levi@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 5月, 2011 2 次提交
-
-
由 Luciano Coelho 提交于
This reverts commit 47684808. Conflicts: drivers/net/wireless/wl12xx/conf.h drivers/net/wireless/wl12xx/main.c
-
由 Arik Nemtsov 提交于
When there's a change in the basic rates of the AP, reconfigure relevant templates with the new rates. Signed-off-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NLuciano Coelho <coelho@ti.com>
-