提交 9487775c 编写于 作者: E Eliad Peller 提交者: Luciano Coelho

wl12xx: add config_hangover command

Add wl12xx_acx_config_hangover() and respective conf values.
This command configures how long the chip will stay awake
after it was configured to enter psm.
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>
上级 e0b38265
......@@ -1691,3 +1691,43 @@ int wl12xx_acx_set_rate_mgmt_params(struct wl1271 *wl)
kfree(acx);
return ret;
}
int wl12xx_acx_config_hangover(struct wl1271 *wl)
{
struct wl12xx_acx_config_hangover *acx;
struct conf_hangover_settings *conf = &wl->conf.hangover;
int ret;
wl1271_debug(DEBUG_ACX, "acx config hangover");
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->recover_time = cpu_to_le32(conf->recover_time);
acx->hangover_period = conf->hangover_period;
acx->dynamic_mode = conf->dynamic_mode;
acx->early_termination_mode = conf->early_termination_mode;
acx->max_period = conf->max_period;
acx->min_period = conf->min_period;
acx->increase_delta = conf->increase_delta;
acx->decrease_delta = conf->decrease_delta;
acx->quiet_time = conf->quiet_time;
acx->increase_time = conf->increase_time;
acx->window_size = acx->window_size;
ret = wl1271_cmd_configure(wl, ACX_CONFIG_HANGOVER, acx,
sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx config hangover failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
......@@ -1144,6 +1144,23 @@ struct wl12xx_acx_set_rate_mgmt_params {
u8 padding2[2];
} __packed;
struct wl12xx_acx_config_hangover {
struct acx_header header;
__le32 recover_time;
u8 hangover_period;
u8 dynamic_mode;
u8 early_termination_mode;
u8 max_period;
u8 min_period;
u8 increase_delta;
u8 decrease_delta;
u8 quiet_time;
u8 increase_time;
u8 window_size;
u8 padding[2];
} __packed;
enum {
ACX_WAKE_UP_CONDITIONS = 0x0002,
ACX_MEM_CFG = 0x0003,
......@@ -1281,5 +1298,6 @@ int wl1271_acx_config_ps(struct wl1271 *wl);
int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
int wl1271_acx_fm_coex(struct wl1271 *wl);
int wl12xx_acx_set_rate_mgmt_params(struct wl1271 *wl);
int wl12xx_acx_config_hangover(struct wl1271 *wl);
#endif /* __WL1271_ACX_H__ */
......@@ -915,14 +915,6 @@ struct conf_conn_settings {
*/
u8 psm_entry_nullfunc_retries;
/*
* Specifies the time to linger in active mode after successfully
* transmitting the PSM entry null-func frame.
*
* Range 0 - 255 TU's
*/
u8 psm_entry_hangover_period;
/*
*
* Specifies the interval of the connection keep-alive null-func
......@@ -1236,6 +1228,20 @@ struct conf_rate_policy_settings {
u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES];
};
struct conf_hangover_settings {
u32 recover_time;
u8 hangover_period;
u8 dynamic_mode;
u8 early_termination_mode;
u8 max_period;
u8 min_period;
u8 increase_delta;
u8 decrease_delta;
u8 quiet_time;
u8 increase_time;
u8 window_size;
};
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
......@@ -1254,6 +1260,7 @@ struct conf_drv_settings {
struct conf_rx_streaming_settings rx_streaming;
struct conf_fwlog fwlog;
struct conf_rate_policy_settings rate;
struct conf_hangover_settings hangover;
u8 hci_io_ds;
};
......
......@@ -707,6 +707,11 @@ int wl1271_hw_init(struct wl1271 *wl)
if (ret < 0)
goto out_free_memmap;
/* configure hangover */
ret = wl12xx_acx_config_hangover(wl);
if (ret < 0)
goto out_free_memmap;
return 0;
out_free_memmap:
......
......@@ -239,7 +239,6 @@ static struct conf_drv_settings default_conf = {
.psm_entry_retries = 8,
.psm_exit_retries = 16,
.psm_entry_nullfunc_retries = 3,
.psm_entry_hangover_period = 1,
.keep_alive_interval = 55000,
.max_listen_interval = 20,
},
......@@ -359,6 +358,19 @@ static struct conf_drv_settings default_conf = {
0x00, 0x00, 0x00,
},
},
.hangover = {
.recover_time = 0,
.hangover_period = 20,
.dynamic_mode = 1,
.early_termination_mode = 1,
.max_period = 20,
.min_period = 1,
.increase_delta = 1,
.decrease_delta = 2,
.quiet_time = 4,
.increase_time = 1,
.window_size = 16,
},
};
static char *fwlog_param;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册