Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 3be4112c 编写于 作者: E Eliad Peller 提交者： Luciano Coelho
浏览文件
操作

wl12xx: update BT coex configuration params 

The BT coex params api have been changed.
Update it, and init coex for both sta and ap.
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>
上级 251c177f
隐藏空白更改
内联 并排
Showing with 177 addition and 367 deletion
drivers/net/wireless/wl12xx/acx.c
浏览文件 @ 3be4112c
......@@ -528,13 +528,13 @@ int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable)
return ret;
}
int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
int wl12xx_acx_sg_cfg(struct wl1271 *wl)
{
struct acx_sta_bt_wlan_coex_param *param;
struct acx_bt_wlan_coex_param *param;
struct conf_sg_settings *c = &wl->conf.sg;
int i, ret;
wl1271_debug(DEBUG_ACX, "acx sg sta cfg");
wl1271_debug(DEBUG_ACX, "acx sg cfg");
param = kzalloc(sizeof(*param), GFP_KERNEL);
if (!param) {
......@@ -543,38 +543,8 @@ int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
}
/* BT-WLAN coext parameters */
for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)
param->params[i] = cpu_to_le32(c->sta_params[i]);
param->param_idx = CONF_SG_PARAMS_ALL;
ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
if (ret < 0) {
wl1271_warning("failed to set sg config: %d", ret);
goto out;
}
out:
kfree(param);
return ret;
}
int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)
{
struct acx_ap_bt_wlan_coex_param *param;
struct conf_sg_settings *c = &wl->conf.sg;
int i, ret;
wl1271_debug(DEBUG_ACX, "acx sg ap cfg");
param = kzalloc(sizeof(*param), GFP_KERNEL);
if (!param) {
ret = -ENOMEM;
goto out;
}
/* BT-WLAN coext parameters */
for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)
param->params[i] = cpu_to_le32(c->ap_params[i]);
for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
param->params[i] = cpu_to_le32(c->params[i]);
param->param_idx = CONF_SG_PARAMS_ALL;
ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
......
drivers/net/wireless/wl12xx/acx.h
浏览文件 @ 3be4112c
......@@ -302,23 +302,14 @@ struct acx_bt_wlan_coex {
u8 pad[3];
} __packed;
struct acx_sta_bt_wlan_coex_param {
struct acx_bt_wlan_coex_param {
struct acx_header header;
__le32 params[CONF_SG_STA_PARAMS_MAX];
__le32 params[CONF_SG_PARAMS_MAX];
u8 param_idx;
u8 padding[3];
} __packed;
struct acx_ap_bt_wlan_coex_param {
struct acx_header header;
__le32 params[CONF_SG_AP_PARAMS_MAX];
u8 param_idx;
u8 padding[3];
} __packed;
struct acx_dco_itrim_params {
struct acx_header header;
......@@ -1269,8 +1260,7 @@ int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);
int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);
int wl12xx_acx_sg_cfg(struct wl1271 *wl);
int wl1271_acx_cca_threshold(struct wl1271 *wl);
int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
......
drivers/net/wireless/wl12xx/conf.h
浏览文件 @ 3be4112c
......@@ -99,40 +99,75 @@ enum {
enum {
/*
* PER threshold in PPM of the BT voice
* Configure the min and max time BT gains the antenna
* in WLAN / BT master basic rate
*
* Range: 0 - 10000000
* Range: 0 - 255 (ms)
*/
CONF_SG_BT_PER_THRESHOLD = 0,
CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
CONF_SG_ACL_BT_MASTER_MAX_BR,
/*
* Number of consequent RX_ACTIVE activities to override BT voice
* frames to ensure WLAN connection
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave basic rate
*
* Range: 0 - 100
* Range: 0 - 255 (ms)
*/
CONF_SG_HV3_MAX_OVERRIDE,
CONF_SG_ACL_BT_SLAVE_MIN_BR,
CONF_SG_ACL_BT_SLAVE_MAX_BR,
/*
* Defines the PER threshold of the BT voice
* Configure the min and max time BT gains the antenna
* in WLAN / BT master EDR
*
* Range: 0 - 65000
* Range: 0 - 255 (ms)
*/
CONF_SG_BT_NFS_SAMPLE_INTERVAL,
CONF_SG_ACL_BT_MASTER_MIN_EDR,
CONF_SG_ACL_BT_MASTER_MAX_EDR,
/*
* Defines the load ratio of BT
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave EDR
*
* Range: 0 - 100 (%)
* Range: 0 - 255 (ms)
*/
CONF_SG_BT_LOAD_RATIO,
CONF_SG_ACL_BT_SLAVE_MIN_EDR,
CONF_SG_ACL_BT_SLAVE_MAX_EDR,
/*
* Defines whether the SG will force WLAN host to enter/exit PSM
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave BR
*
* Range: 1 - SG can force, 0 - host handles PSM
* Range: 0 - 255 (ms)
*/
CONF_SG_AUTO_PS_MODE,
CONF_SG_ACL_WLAN_PS_MASTER_BR,
CONF_SG_ACL_WLAN_PS_SLAVE_BR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_WLAN_PS_MASTER_EDR,
CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
/* TODO: explain these values */
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
/*
* Compensation percentage of probe requests when scan initiated
......@@ -151,102 +186,70 @@ enum {
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - single antenna, 1 - dual antenna
*/
CONF_SG_ANTENNA_CONFIGURATION,
/*
* The threshold (percent) of max consequtive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 100 (%)
*/
CONF_SG_BEACON_MISS_PERCENT,
/*
* The rate threshold below which receiving a data frame from the AP
* will increase the priority of the data frame above BT traffic.
*
* Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
*/
CONF_SG_RATE_ADAPT_THRESH,
/*
* Not used currently.
* Compensation percentage of WLAN active scan window if initiated
* during BT A2DP
*
* Range: 0
* Range: 0 - 1000 (%)
*/
CONF_SG_RATE_ADAPT_SNR,
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT master basic rate
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP BR
*
* Range: 0 - 255 (ms)
* Range: 0 - 1000 (%)
*/
CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT master basic rate
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP EDR
*
* Range: 0 - 255 (ms)
* Range: 0 - 1000 (%)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT slave basic rate
* Compensation percentage of WLAN passive scan window if initiated
* during BT voice
*
* Range: 0 - 255 (ms)
* Range: 0 - 1000 (%)
*/
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT slave basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
/* TODO: explain these values */
CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT master EDR
* Defines whether the SG will force WLAN host to enter/exit PSM
*
* Range: 0 - 255 (ms)
* Range: 1 - SG can force, 0 - host handles PSM
*/
CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
CONF_SG_STA_FORCE_PS_IN_BT_SCO,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT master EDR
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - 255 (ms)
* Range: 0 - single antenna, 1 - dual antenna
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
CONF_SG_ANTENNA_CONFIGURATION,
/*
* Configure the min and max time BT gains the antenna
* in WLAN PSM / BT slave EDR
* The threshold (percent) of max consecutive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 255 (ms)
* Range: 0 - 100 (%)
*/
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
CONF_SG_BEACON_MISS_PERCENT,
/*
* The time after it expires no new WLAN trigger frame is trasmitted
* in WLAN PSM / BT slave EDR
* Protection time of the DHCP procedure.
*
* Range: 0 - 255 (ms)
* Range: 0 - 100000 (ms)
*/
CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
CONF_SG_DHCP_TIME,
/*
* RX guard time before the beginning of a new BT voice frame during
......@@ -273,166 +276,59 @@ enum {
*/
CONF_SG_ADAPTIVE_RXT_TXT,
/*
* The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_PS_POLL_TIMEOUT,
/*
* The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_UPSD_TIMEOUT,
/*
* Configure the min and max time BT gains the antenna
* in WLAN Active / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna for
* in WLAN Active / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
/* TODO: explain this value */
CONF_SG_GENERAL_USAGE_BIT_MAP,
/*
* Configure the min and max time BT gains the antenna
* in WLAN Active / BT slave EDR
* Number of consecutive BT voice frames not interrupted by WLAN
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna for
* in WLAN Active / BT slave EDR
*
* Range: 0 - 255 (ms)
* Range: 0 - 100
*/
CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
CONF_SG_HV3_MAX_SERVED,
/*
* Configure the min and max time BT gains the antenna
* in WLAN Active / BT basic rate
* The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
CONF_SG_PS_POLL_TIMEOUT,
/*
* The maximum time WLAN can gain the antenna for
* in WLAN Active / BT basic rate
* The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT voice
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
CONF_SG_UPSD_TIMEOUT,
/*
* Fixed time ensured for BT traffic to gain the antenna during WLAN
* passive scan.
*
* Range: 0 - 1000 ms
*/
CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
CONF_SG_STA_CONNECTION_PROTECTION_TIME,
/*
* Fixed time ensured for WLAN traffic to gain the antenna during WLAN
* passive scan.
*
* Range: 0 - 1000 ms
*/
CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
/* AP params */
CONF_AP_BEACON_MISS_TX,
CONF_AP_RX_WINDOW_AFTER_BEACON,
CONF_AP_BEACON_WINDOW_INTERVAL,
CONF_AP_CONNECTION_PROTECTION_TIME,
CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
/*
* Number of consequent BT voice frames not interrupted by WLAN
*
* Range: 0 - 100
*/
CONF_SG_HV3_MAX_SERVED,
/*
* Protection time of the DHCP procedure.
*
* Range: 0 - 100000 (ms)
*/
CONF_SG_DHCP_TIME,
/*
* Compensation percentage of WLAN active scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
CONF_SG_TEMP_PARAM_1,
CONF_SG_TEMP_PARAM_2,
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
/*
* AP beacon miss
*
* Range: 0 - 255
*/
CONF_SG_AP_BEACON_MISS_TX,
/*
* AP RX window length
*
* Range: 0 - 50
*/
CONF_SG_RX_WINDOW_LENGTH,
/*
* AP connection protection time
*
* Range: 0 - 5000
*/
CONF_SG_AP_CONNECTION_PROTECTION_TIME,
CONF_SG_TEMP_PARAM_6,
CONF_SG_TEMP_PARAM_7,
CONF_SG_TEMP_PARAM_8,
CONF_SG_TEMP_PARAM_9,
CONF_SG_TEMP_PARAM_10,
CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
CONF_SG_PARAMS_MAX,
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
u32 sta_params[CONF_SG_STA_PARAMS_MAX];
u32 ap_params[CONF_SG_AP_PARAMS_MAX];
u32 params[CONF_SG_PARAMS_MAX];
u8 state;
};
......@@ -913,7 +809,7 @@ struct conf_conn_settings {
struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
/*
* The number of consequtive beacons to lose, before the firmware
* The number of consecutive beacons to lose, before the firmware
* becomes out of synch.
*
* Range: u32
......@@ -951,7 +847,7 @@ struct conf_conn_settings {
u8 rx_broadcast_in_ps;
/*
* Consequtive PS Poll failures before sending event to driver
* Consecutive PS Poll failures before sending event to driver
*
* Range: u8
*/
......
drivers/net/wireless/wl12xx/init.c
浏览文件 @ 3be4112c
......@@ -277,10 +277,7 @@ int wl1271_init_pta(struct wl1271 *wl)
{
int ret;
if (wl->bss_type == BSS_TYPE_AP_BSS)
ret = wl1271_acx_ap_sg_cfg(wl);
else
ret = wl1271_acx_sta_sg_cfg(wl);
ret = wl12xx_acx_sg_cfg(wl);
if (ret < 0)
return ret;
......
drivers/net/wireless/wl12xx/main.c
浏览文件 @ 3be4112c
......@@ -52,110 +52,67 @@
static struct conf_drv_settings default_conf = {
.sg = {
.sta_params = {
[CONF_SG_BT_PER_THRESHOLD] = 7500,
[CONF_SG_HV3_MAX_OVERRIDE] = 0,
[CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
[CONF_SG_BT_LOAD_RATIO] = 200,
[CONF_SG_AUTO_PS_MODE] = 1,
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
[CONF_SG_BEACON_MISS_PERCENT] = 60,
[CONF_SG_RATE_ADAPT_THRESH] = 12,
[CONF_SG_RATE_ADAPT_SNR] = 0,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 30,
[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 8,
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20,
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 50,
/* Note: with UPSD, this should be 4 */
[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 8,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25,
[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 20,
/* Note: with UPDS, this should be 15 */
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8,
/* Note: with UPDS, this should be 50 */
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 40,
/* Note: with UPDS, this should be 10 */
[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 20,
[CONF_SG_RXT] = 1200,
[CONF_SG_TXT] = 1000,
[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[CONF_SG_PS_POLL_TIMEOUT] = 10,
[CONF_SG_UPSD_TIMEOUT] = 10,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8,
[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20,
[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50,
[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75,
[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15,
[CONF_SG_HV3_MAX_SERVED] = 6,
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
},
.ap_params = {
[CONF_SG_BT_PER_THRESHOLD] = 7500,
[CONF_SG_HV3_MAX_OVERRIDE] = 0,
[CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
[CONF_SG_BT_LOAD_RATIO] = 50,
[CONF_SG_AUTO_PS_MODE] = 1,
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
[CONF_SG_BEACON_MISS_PERCENT] = 60,
[CONF_SG_RATE_ADAPT_THRESH] = 64,
[CONF_SG_RATE_ADAPT_SNR] = 1,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 25,
[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 25,
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20,
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 25,
[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 25,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7,
[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25,
[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 25,
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8,
[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 25,
[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 25,
[CONF_SG_RXT] = 1200,
[CONF_SG_TXT] = 1000,
[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[CONF_SG_PS_POLL_TIMEOUT] = 10,
[CONF_SG_UPSD_TIMEOUT] = 10,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8,
[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20,
[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20,
[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50,
[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75,
[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15,
[CONF_SG_HV3_MAX_SERVED] = 6,
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
[CONF_SG_TEMP_PARAM_1] = 0,
[CONF_SG_TEMP_PARAM_2] = 0,
[CONF_SG_TEMP_PARAM_3] = 0,
[CONF_SG_TEMP_PARAM_4] = 0,
[CONF_SG_TEMP_PARAM_5] = 0,
[CONF_SG_AP_BEACON_MISS_TX] = 3,
[CONF_SG_RX_WINDOW_LENGTH] = 6,
[CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 50,
[CONF_SG_TEMP_PARAM_6] = 1,
.params = {
[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
/* active scan params */
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
/* passive scan params */
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
/* passive scan in dual antenna params */
[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
/* general params */
[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
[CONF_SG_BEACON_MISS_PERCENT] = 60,
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_RXT] = 1200,
[CONF_SG_TXT] = 1000,
[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
[CONF_SG_HV3_MAX_SERVED] = 6,
[CONF_SG_PS_POLL_TIMEOUT] = 10,
[CONF_SG_UPSD_TIMEOUT] = 10,
[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
/* AP params */
[CONF_AP_BEACON_MISS_TX] = 3,
[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
},
.state = CONF_SG_PROTECTIVE,
},
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或