- 13 2月, 2019 29 次提交
-
-
由 Miklos Szeredi 提交于
commit a2ebba824106dabe79937a9f29a875f837e1b6d4 upstream. NR_WRITEBACK_TEMP is accounted on the temporary page in the request, not the page cache page. Fixes: 8b284dc4 ("fuse: writepages: handle same page rewrites") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jann Horn 提交于
commit 9509941e9c534920ccc4771ae70bd6cbbe79df1c upstream. Some of the pipe_buf_release() handlers seem to assume that the pipe is locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page without taking any extra locks. From a glance through the callers of pipe_buf_release(), it looks like FUSE is the only one that calls pipe_buf_release() without having the pipe locked. This bug should only lead to a memory leak, nothing terrible. Fixes: dd3bb14f ("fuse: support splice() writing to fuse device") Cc: stable@vger.kernel.org Signed-off-by: NJann Horn <jannh@google.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Brian Foster 提交于
commit aa6ee4ab69293969867ab09b57546d226ace3d7a upstream. The cached writeback mapping is EOF trimmed to try and avoid races between post-eof block management and writeback that result in sending cached data to a stale location. The cached mapping is currently trimmed on the validation check, which leaves a race window between the time the mapping is cached and when it is trimmed against the current inode size. For example, if a new mapping is cached by delalloc conversion on a blocksize == page size fs, we could cycle various locks, perform memory allocations, etc. in the writeback codepath before the associated mapping is eventually trimmed to i_size. This leaves enough time for a post-eof truncate and file append before the cached mapping is trimmed. The former event essentially invalidates a range of the cached mapping and the latter bumps the inode size such the trim on the next writepage event won't trim all of the invalid blocks. fstest generic/464 reproduces this scenario occasionally and causes a lost writeback and stale delalloc blocks warning on inode inactivation. To work around this problem, trim the cached writeback mapping as soon as it is cached in addition to on subsequent validation checks. This is a minor tweak to tighten the race window as much as possible until a proper invalidation mechanism is available. Fixes: 40214d12 ("xfs: trim writepage mapping to within eof") Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NAllison Henderson <allison.henderson@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Sandeen 提交于
commit 7d048df4e9b05ba89b74d062df59498aa81f3785 upstream. xfs_btree_sblock_verify_crc is a bool so should not be returning a failaddr_t; worse, if xfs_log_check_lsn fails it returns __this_address which looks like a boolean true (i.e. success) to the caller. (interestingly xfs_btree_lblock_verify_crc doesn't have the issue) Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Darrick J. Wong 提交于
commit a579121f94aba4e8bad1a121a0fad050d6925296 upstream. In commit e53c4b59, I *tried* to teach xfs to force writeback when we fzero/fpunch right up to EOF so that if EOF is in the middle of a page, the post-EOF part of the page gets zeroed before we return to userspace. Unfortunately, I missed the part where PAGE_MASK is ~(PAGE_SIZE - 1), which means that we totally fail to zero if we're fpunching and EOF is within the first page. Worse yet, the same PAGE_MASK thinko plagues the filemap_write_and_wait_range call, so we'd initiate writeback of the entire file, which (mostly) masked the thinko. Drop the tricky PAGE_MASK and replace it with correct usage of PAGE_SIZE and the proper rounding macros. Fixes: e53c4b59 ("xfs: ensure post-EOF zeroing happens after zeroing part of a file") Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Ye Yin 提交于
commit de7243057e7cefa923fa5f467c0f1ec24eef41d2 upsream. When project is set, we should use inode limit minus the used count Signed-off-by: NYe Yin <dbyin@tencent.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dave Chinner 提交于
commit 9230a0b65b47fe6856c4468ec0175c4987e5bede upstream. Long saga. There have been days spent following this through dead end after dead end in multi-GB event traces. This morning, after writing a trace-cmd wrapper that enabled me to be more selective about XFS trace points, I discovered that I could get just enough essential tracepoints enabled that there was a 50:50 chance the fsx config would fail at ~115k ops. If it didn't fail at op 115547, I stopped fsx at op 115548 anyway. That gave me two traces - one where the problem manifested, and one where it didn't. After refining the traces to have the necessary information, I found that in the failing case there was a real extent in the COW fork compared to an unwritten extent in the working case. Walking back through the two traces to the point where the CWO fork extents actually diverged, I found that the bad case had an extra unwritten extent in it. This is likely because the bug it led me to had triggered multiple times in those 115k ops, leaving stray COW extents around. What I saw was a COW delalloc conversion to an unwritten extent (as they should always be through xfs_iomap_write_allocate()) resulted in a /written extent/: xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0 xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex Basically, Cow fork before: 0 1 32 52 +H+DDDDDDDDDDDD+UUUUUUUUUUU+ PREV RIGHT COW delalloc conversion allocates: 1 32 +uuuuuuuuuuuu+ NEW And the result according to the xfs_bmap_post_update trace was: 0 1 32 52 +H+wwwwwwwwwwwwwwwwwwwwwwww+ PREV Which is clearly wrong - it should be a merged unwritten extent, not an unwritten extent. That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG case in xfs_bmap_add_extent_delay_real(), and sure enough, there's the bug. It takes the old delalloc extent (PREV) and adds the length of the RIGHT extent to it, takes the start block from NEW, removes the RIGHT extent and then updates PREV with the new extent. What it fails to do is update PREV.br_state. For delalloc, this is always XFS_EXT_NORM, while in this case we are converting the delayed allocation to unwritten, so it needs to be updated to XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so the resultant extent is always written. And that's the bug I've been chasing for a week - a bmap btree bug, not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced with the recent in core extent tree scalability enhancements. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dave Chinner 提交于
commit d43aaf1685aa471f0593685c9f54d53e3af3cf3f upstream. When retrying a failed inode or dquot buffer, xfs_buf_resubmit_failed_buffers() clears all the failed flags from the inde/dquot log items. In doing so, it also drops all the reference counts on the buffer that the failed log items hold. This means it can drop all the active references on the buffer and hence free the buffer before it queues it for write again. Putting the buffer on the delwri queue takes a reference to the buffer (so that it hangs around until it has been written and completed), but this goes bang if the buffer has already been freed. Hence we need to add the buffer to the delwri queue before we remove the failed flags from the log items attached to the buffer to ensure it always remains referenced during the resubmit process. Reported-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Brian Foster 提交于
commit 59e4293149106fb92530f8e56fa3992d8548c5e6 upstream. Page writeback indirectly handles shared extents via the existence of overlapping COW fork blocks. If COW fork blocks exist, writeback always performs the associated copy-on-write regardless if the underlying blocks are actually shared. If the blocks are shared, then overlapping COW fork blocks must always exist. fstests shared/010 reproduces a case where a buffered write occurs over a shared block without performing the requisite COW fork reservation. This ultimately causes writeback to the shared extent and data corruption that is detected across md5 checks of the filesystem across a mount cycle. The problem occurs when a buffered write lands over a shared extent that crosses an extent size hint boundary and that also happens to have a partial COW reservation that doesn't cover the start and end blocks of the data fork extent. For example, a buffered write occurs across the file offset (in FSB units) range of [29, 57]. A shared extent exists at blocks [29, 35] and COW reservation already exists at blocks [32, 34]. After accommodating a COW extent size hint of 32 blocks and the existing reservation at offset 32, xfs_reflink_reserve_cow() allocates 32 blocks of reservation at offset 0 and returns with COW reservation across the range of [0, 34]. The associated data fork extent is still [29, 35], however, which isn't fully covered by the COW reservation. This leads to a buffered write at file offset 35 over a shared extent without associated COW reservation. Writeback eventually kicks in, performs an overwrite of the underlying shared block and causes the associated data corruption. Update xfs_reflink_reserve_cow() to accommodate the fact that a delalloc allocation request may not fully cover the extent in the data fork. Trim the data fork extent appropriately, just as is done for shared extent boundaries and/or existing COW reservations that happen to overlap the start of the data fork extent. This prevents shared/010 failures due to data corruption on reflink enabled filesystems. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dave Chinner 提交于
commit 837514f7a4ca4aca06aec5caa5ff56d33ef06976 upstream. generic/070 on 64k block size filesystems is failing with a verifier corruption on writeback or an attribute leaf block: [ 94.973083] XFS (pmem0): Metadata corruption detected at xfs_attr3_leaf_verify+0x246/0x260, xfs_attr3_leaf block 0x811480 [ 94.975623] XFS (pmem0): Unmount and run xfs_repair [ 94.976720] XFS (pmem0): First 128 bytes of corrupted metadata buffer: [ 94.978270] 000000004b2e7b45: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;....... [ 94.980268] 000000006b1db90b: 00 00 00 00 00 81 14 80 00 00 00 00 00 00 00 00 ................ [ 94.982251] 00000000433f2407: 22 7b 5c 82 2d 5c 47 4c bb 31 1c 37 fa a9 ce d6 "{\.-\GL.1.7.... [ 94.984157] 0000000010dc7dfb: 00 00 00 00 00 81 04 8a 00 0a 18 e8 dd 94 01 00 ................ [ 94.986215] 00000000d5a19229: 00 a0 dc f4 fe 98 01 68 f0 d8 07 e0 00 00 00 00 .......h........ [ 94.988171] 00000000521df36c: 0c 2d 32 e2 fe 20 01 00 0c 2d 58 65 fe 0c 01 00 .-2.. ...-Xe.... [ 94.990162] 000000008477ae06: 0c 2d 5b 66 fe 8c 01 00 0c 2d 71 35 fe 7c 01 00 .-[f.....-q5.|.. [ 94.992139] 00000000a4a6bca6: 0c 2d 72 37 fc d4 01 00 0c 2d d8 b8 f0 90 01 00 .-r7.....-...... [ 94.994789] XFS (pmem0): xfs_do_force_shutdown(0x8) called from line 1453 of file fs/xfs/xfs_buf.c. Return address = ffffffff815365f3 This is failing this check: end = ichdr.freemap[i].base + ichdr.freemap[i].size; if (end < ichdr.freemap[i].base) >>>>> return __this_address; if (end > mp->m_attr_geo->blksize) return __this_address; And from the buffer output above, the freemap array is: freemap[0].base = 0x00a0 freemap[0].size = 0xdcf4 end = 0xdd94 freemap[1].base = 0xfe98 freemap[1].size = 0x0168 end = 0x10000 freemap[2].base = 0xf0d8 freemap[2].size = 0x07e0 end = 0xf8b8 These all look valid - the block size is 0x10000 and so from the last check in the above verifier fragment we know that the end of freemap[1] is valid. The problem is that end is declared as: uint16_t end; And (uint16_t)0x10000 = 0. So we have a verifier bug here, not a corruption. Fix the verifier to use uint32_t types for the check and hence avoid the overflow. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=201577Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Christophe JAILLET 提交于
commit 132bf6723749f7219c399831eeb286dbbb985429 upstream. In this function, once 'buf' has been allocated, we unconditionally return 0. However, 'error' is set to some error codes in several error handling paths. Before commit 232b5194 ("xfs: simplify the xfs_getbmap interface") this was not an issue because all error paths were returning directly, but now that some cleanup at the end may be needed, we must propagate the error code. Fixes: 232b5194 ("xfs: simplify the xfs_getbmap interface") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Christoph Hellwig 提交于
commit 96987eea537d6ccd98704a71958f9ba02da80843 upstream. We need to make sure we have no outstanding COW blocks before we swap extents, as there is nothing preventing us from having preallocated COW delalloc on either inode that swapext is called on. That case can easily be reproduced by running generic/324 in always_cow mode: [ 620.760572] XFS: Assertion failed: tip->i_delayed_blks == 0, file: fs/xfs/xfs_bmap_util.c, line: 1669 [ 620.761608] ------------[ cut here ]------------ [ 620.762171] kernel BUG at fs/xfs/xfs_message.c:102! [ 620.762732] invalid opcode: 0000 [#1] SMP PTI [ 620.763272] CPU: 0 PID: 24153 Comm: xfs_fsr Tainted: G W 4.19.0-rc1+ #4182 [ 620.764203] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 620.765202] RIP: 0010:assfail+0x20/0x28 [ 620.765646] Code: 31 ff e8 83 fc ff ff 0f 0b c3 48 89 f1 41 89 d0 48 c7 c6 48 ca 8d 82 48 89 fa 38 [ 620.767758] RSP: 0018:ffffc9000898bc10 EFLAGS: 00010202 [ 620.768359] RAX: 0000000000000000 RBX: ffff88012f14ba40 RCX: 0000000000000000 [ 620.769174] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828560d9 [ 620.769982] RBP: ffff88012f14b300 R08: 0000000000000000 R09: 0000000000000000 [ 620.770788] R10: 000000000000000a R11: f000000000000000 R12: ffffc9000898bc98 [ 620.771638] R13: ffffc9000898bc9c R14: ffff880130b5e2b8 R15: ffff88012a1fa2a8 [ 620.772504] FS: 00007fdc36e0fbc0(0000) GS:ffff88013ba00000(0000) knlGS:0000000000000000 [ 620.773475] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 620.774168] CR2: 00007fdc3604d000 CR3: 0000000132afc000 CR4: 00000000000006f0 [ 620.774978] Call Trace: [ 620.775274] xfs_swap_extent_forks+0x2a0/0x2e0 [ 620.775792] xfs_swap_extents+0x38b/0xab0 [ 620.776256] xfs_ioc_swapext+0x121/0x140 [ 620.776709] xfs_file_ioctl+0x328/0xc90 [ 620.777154] ? rcu_read_lock_sched_held+0x50/0x60 [ 620.777694] ? xfs_iunlock+0x233/0x260 [ 620.778127] ? xfs_setattr_nonsize+0x3be/0x6a0 [ 620.778647] do_vfs_ioctl+0x9d/0x680 [ 620.779071] ? ksys_fchown+0x47/0x80 [ 620.779552] ksys_ioctl+0x35/0x70 [ 620.780040] __x64_sys_ioctl+0x11/0x20 [ 620.780530] do_syscall_64+0x4b/0x190 [ 620.780927] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 620.781467] RIP: 0033:0x7fdc364d0f07 [ 620.781900] Code: b3 66 90 48 8b 05 81 5f 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 28 [ 620.784044] RSP: 002b:00007ffe2a766038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 620.784896] RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fdc364d0f07 [ 620.785667] RDX: 0000560296ca2fc0 RSI: 00000000c0c0586d RDI: 0000000000000005 [ 620.786398] RBP: 0000000000000025 R08: 0000000000001200 R09: 0000000000000000 [ 620.787283] R10: 0000000000000432 R11: 0000000000000246 R12: 0000000000000005 [ 620.788051] R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000006 [ 620.788927] Modules linked in: [ 620.789340] ---[ end trace 9503b7417ffdbdb0 ]--- [ 620.790065] RIP: 0010:assfail+0x20/0x28 [ 620.790642] Code: 31 ff e8 83 fc ff ff 0f 0b c3 48 89 f1 41 89 d0 48 c7 c6 48 ca 8d 82 48 89 fa 38 [ 620.793038] RSP: 0018:ffffc9000898bc10 EFLAGS: 00010202 [ 620.793609] RAX: 0000000000000000 RBX: ffff88012f14ba40 RCX: 0000000000000000 [ 620.794317] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828560d9 [ 620.795025] RBP: ffff88012f14b300 R08: 0000000000000000 R09: 0000000000000000 [ 620.795778] R10: 000000000000000a R11: f000000000000000 R12: ffffc9000898bc98 [ 620.796675] R13: ffffc9000898bc9c R14: ffff880130b5e2b8 R15: ffff88012a1fa2a8 [ 620.797782] FS: 00007fdc36e0fbc0(0000) GS:ffff88013ba00000(0000) knlGS:0000000000000000 [ 620.798908] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 620.799594] CR2: 00007fdc3604d000 CR3: 0000000132afc000 CR4: 00000000000006f0 [ 620.800424] Kernel panic - not syncing: Fatal exception [ 620.801191] Kernel Offset: disabled [ 620.801597] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Carlos Maiolino 提交于
commit 41657e5507b13e963be906d5d874f4f02374fd5c upstream. The addition of FIBT, RMAP and REFCOUNT changed the offsets into __xfssats structure. This caused xqmstat_proc_show() to display garbage data via /proc/fs/xfs/xqmstat, once it relies on the offsets marked via macros. Fix it. Fixes: 00f4e4f9 xfs: add rmap btree stats infrastructure Fixes: aafc3c24 xfs: support the XFS_BTNUM_FINOBT free inode btree type Fixes: 46eeb521 xfs: introduce refcount btree definitions Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Oleg Nesterov 提交于
[ Upstream commit 8099b047ecc431518b9bb6bdbba3549bbecdc343 ] load_script() simply truncates bprm->buf and this is very wrong if the length of shebang string exceeds BINPRM_BUF_SIZE-2. This can silently truncate i_arg or (worse) we can execute the wrong binary if buf[2:126] happens to be the valid executable path. Change load_script() to return ENOEXEC if it can't find '\n' or zero in bprm->buf. Note that '\0' can come from either prepare_binprm()->memset() or from kernel_read(), we do not care. Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NKees Cook <keescook@chromium.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Ben Woodard <woodard@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Davidlohr Bueso 提交于
[ Upstream commit 76699a67f3041ff4c7af6d6ee9be2bfbf1ffb671 ] The ep->ovflist is a secondary ready-list to temporarily store events that might occur when doing sproc without holding the ep->wq.lock. This accounts for every time we check for ready events and also send events back to userspace; both callbacks, particularly the latter because of copy_to_user, can account for a non-trivial time. As such, the unlikely() check to see if the pointer is being used, seems both misleading and sub-optimal. In fact, we go to an awful lot of trouble to sync both lists, and populating the ovflist is far from an uncommon scenario. For example, profiling a concurrent epoll_wait(2) benchmark, with CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33% incorrect rate was seen; and when incrementally increasing the number of epoll instances (which is used, for example for multiple queuing load balancing models), up to a 90% incorrect rate was seen. Similarly, by deleting the prediction, 3% throughput boost was seen across incremental threads. Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Larry Chen 提交于
[ Upstream commit 9e6aea22802b5684c7e1d69822aeb0844dd01953 ] Included file path was hard-wired in the ocfs2 makefile, which might causes some confusion when compiling ocfs2 as an external module. Say if we compile ocfs2 module as following. cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2 cd /other/dir/ocfs2 make -C /path/to/kernel_source M=`pwd` modules Acutally, the compiler wil try to find included file in /kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2. To fix this little bug, we introduce the var $(src) provided by kbuild. $(src) means the absolute path of the running kbuild file. Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.comSigned-off-by: NLarry Chen <lchen@suse.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Junxiao Bi 提交于
[ Upstream commit 70306d9dce75abde855cefaf32b3f71eed8602a3 ] For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag and submit the io, second wait io done, last check whether bh uptodate, if not return io error. If two sync io for the same bh were issued, it could be the first io done and set uptodate flag, but just before check that flag, the second io came in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io will return IO error. Indeed it's not necessary to clear uptodate flag, as the io end handler end_buffer_read_sync() will set or clear it based on io succeed or failed. The following message was found from a nfs server but the underlying storage returned no error. [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 Same issue in non sync read ocfs2_read_blocks(), fixed it as well. Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com> Reviewed-by: NChangwei Ge <ge.changwei@h3c.com> Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sahitya Tummala 提交于
[ Upstream commit e4589fa545e0020dbbc3c9bde35f35f949901392 ] When there is a failure in f2fs_fill_super() after/during the recovery of fsync'd nodes, it frees the current sbi and retries again. This time the mount is successful, but the files that got recovered before retry, still holds the extent tree, whose extent nodes list is corrupted since sbi and sbi->extent_list is freed up. The list_del corruption issue is observed when the file system is getting unmounted and when those recoverd files extent node is being freed up in the below context. list_del corruption. prev->next should be fffffff1e1ef5480, but was (null) <...> kernel BUG at kernel/msm-4.14/lib/list_debug.c:53! lr : __list_del_entry_valid+0x94/0xb4 pc : __list_del_entry_valid+0x94/0xb4 <...> Call trace: __list_del_entry_valid+0x94/0xb4 __release_extent_node+0xb0/0x114 __free_extent_tree+0x58/0x7c f2fs_shrink_extent_tree+0xdc/0x3b0 f2fs_leave_shrinker+0x28/0x7c f2fs_put_super+0xfc/0x1e0 generic_shutdown_super+0x70/0xf4 kill_block_super+0x2c/0x5c kill_f2fs_super+0x44/0x50 deactivate_locked_super+0x60/0x8c deactivate_super+0x68/0x74 cleanup_mnt+0x40/0x78 __cleanup_mnt+0x1c/0x28 task_work_run+0x48/0xd0 do_notify_resume+0x678/0xe98 work_pending+0x8/0x14 Fix this by not creating extents for those recovered files if shrinker is not registered yet. Once mount is successful and shrinker is registered, those files can have extents again. Signed-off-by: NSahitya Tummala <stummala@codeaurora.org> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sahitya Tummala 提交于
[ Upstream commit 60aa4d5536ab7fe32433ca1173bd9d6633851f27 ] iput() on sbi->node_inode can update sbi->stat_info in the below context, if the f2fs_write_checkpoint() has failed with error. f2fs_balance_fs_bg+0x1ac/0x1ec f2fs_write_node_pages+0x4c/0x260 do_writepages+0x80/0xbc __writeback_single_inode+0xdc/0x4ac writeback_single_inode+0x9c/0x144 write_inode_now+0xc4/0xec iput+0x194/0x22c f2fs_put_super+0x11c/0x1e8 generic_shutdown_super+0x70/0xf4 kill_block_super+0x2c/0x5c kill_f2fs_super+0x44/0x50 deactivate_locked_super+0x60/0x8c deactivate_super+0x68/0x74 cleanup_mnt+0x40/0x78 Fix this by moving f2fs_destroy_stats() further below iput() in both f2fs_put_super() and f2fs_fill_super() paths. Signed-off-by: NSahitya Tummala <stummala@codeaurora.org> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Ronnie Sahlberg 提交于
[ Upstream commit 59a63e479ce36a3f24444c3a36efe82b78e4a8e0 ] RHBZ: 1021460 There is an issue where when multiple threads open/close the same directory ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize later to oops with a NULL deref. The real bug is why this happens and why this can become NULL for an open cfile, which should not be allowed. This patch tries to avoid a oops until the time when we fix the underlying issue. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Chris Perl 提交于
[ Upstream commit 594d1644cd59447f4fceb592448d5cd09eb09b5e ] This patch removes the check from nfs_compare_mount_options to see if a `sec' option was passed for the current mount before comparing auth flavors and instead just always compares auth flavors. Consider the following scenario: You have a server with the address 192.168.1.1 and two exports /export/a and /export/b. The first export supports `sys' and `krb5' security, the second just `sys'. Assume you start with no mounts from the server. The following results in EIOs being returned as the kernel nfs client incorrectly thinks it can share the underlying `struct nfs_server's: $ mkdir /tmp/{a,b} $ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a $ sudo mount -t nfs -o vers=3 192.168.1.1:/export/b /tmp/b $ df >/dev/null df: ‘/tmp/b’: Input/output error Signed-off-by: NChris Perl <cperl@janestreet.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Ethan Lien 提交于
[ Upstream commit 3cd24c698004d2f7668e0eb9fc1f096f533c791b ] Snapshot is expected to be fast. But if there are writers steadily creating dirty pages in our subvolume, the snapshot may take a very long time to complete. To fix the problem, we use tagged writepage for snapshot flusher as we do in the generic write_cache_pages(), so we can omit pages dirtied after the snapshot command. This does not change the semantics regarding which data get to the snapshot, if there are pages being dirtied during the snapshotting operation. There's a sync called before snapshot is taken in old/new case, any IO in flight just after that may be in the snapshot but this depends on other system effects that might still sync the IO. We do a simple snapshot speed test on a Intel D-1531 box: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G --direct=0 --thread=1 --numjobs=1 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 1m58sec patched: 6.54sec This is the best case for this patch since for a sequential write case, we omit nearly all pages dirtied after the snapshot command. For a multi writers, random write test: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G --direct=0 --thread=1 --numjobs=4 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 15.83sec patched: 10.35sec The improvement is smaller compared to the sequential write case, since we omit only half of the pages dirtied after snapshot command. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NEthan Lien <ethanlien@synology.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Anand Jain 提交于
[ Upstream commit a9261d4125c97ce8624e9941b75dee1b43ad5df9 ] It's not that impossible to imagine that a device OR a btrfs image is copied just by using the dd or the cp command. Which in case both the copies of the btrfs will have the same fsid. If on the system with automount enabled, the copied FS gets scanned. We have a known bug in btrfs, that we let the device path be changed after the device has been mounted. So using this loop hole the new copied device would appears as if its mounted immediately after it's been copied. For example: Initially.. /dev/mmcblk0p4 is mounted as / $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 29.2G 0 disk |-mmcblk0p4 179:4 0 4G 0 part / |-mmcblk0p2 179:2 0 500M 0 part /boot |-mmcblk0p3 179:3 0 256M 0 part [SWAP] `-mmcblk0p1 179:1 0 256M 0 part /boot/efi $ btrfs fi show Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba Total devices 1 FS bytes used 1.40GiB devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4 Copy mmcblk0 to sda $ dd if=/dev/mmcblk0 of=/dev/sda And immediately after the copy completes the change in the device superblock is notified which the automount scans using btrfs device scan and the new device sda becomes the mounted root device. $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 14.9G 0 disk |-sda4 8:4 1 4G 0 part / |-sda2 8:2 1 500M 0 part |-sda3 8:3 1 256M 0 part `-sda1 8:1 1 256M 0 part mmcblk0 179:0 0 29.2G 0 disk |-mmcblk0p4 179:4 0 4G 0 part |-mmcblk0p2 179:2 0 500M 0 part /boot |-mmcblk0p3 179:3 0 256M 0 part [SWAP] `-mmcblk0p1 179:1 0 256M 0 part /boot/efi $ btrfs fi show / Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba Total devices 1 FS bytes used 1.40GiB devid 1 size 4.00GiB used 3.00GiB path /dev/sda4 The bug is quite nasty that you can't either unmount /dev/sda4 or /dev/mmcblk0p4. And the problem does not get solved until you take sda out of the system on to another system to change its fsid using the 'btrfstune -u' command. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jan Kara 提交于
[ Upstream commit d288d95842f1503414b7eebce3773bac3390457e ] When inode is corrupted so that extent type is invalid, some functions (such as udf_truncate_extents()) will just BUG. Check that extent type is valid when loading the inode to memory. Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 J. Bruce Fields 提交于
[ Upstream commit 62a063b8e7d1db684db3f207261a466fa3194e72 ] Anatoly Trosinenko reports that this: 1) Checkout fresh master Linux branch (tested with commit e195ca6cb) 2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build 3) From `kvm-xfstests shell`: results in NULL dereference in locks_end_grace. Check that nfsd has been started before trying to end the grace period. Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Tiezhu Yang 提交于
[ Upstream commit f6176473a0c7472380eef72ebeb330cf9485bf0a ] When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create() should return -EIO instead of -ENOMEM, this patch makes it consistent with posix_acl_create() which has been fixed in commit beaf226b ("posix_acl: don't ignore return value of posix_acl_create_masq()"). Fixes: 83dfe53c ("f2fs: fix reference leaks in f2fs_acl_create") Signed-off-by: NTiezhu Yang <kernelpatch@126.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sheng Yong 提交于
[ Upstream commit 2866fb16d67992195b0526d19e65acb6640fb87f ] The following race could lead to inconsistent SIT bitmap: Task A Task B ====== ====== f2fs_write_checkpoint block_operations f2fs_lock_all down_write(node_change) down_write(node_write) ... sync ... up_write(node_change) f2fs_file_write_iter set_inode_flag(FI_NO_PREALLOC) ...... f2fs_write_begin(index=0, has inline data) prepare_write_begin __do_map_lock(AIO) => down_read(node_change) f2fs_convert_inline_page => update SIT __do_map_lock(AIO) => up_read(node_change) f2fs_flush_sit_entries <= inconsistent SIT finish write checkpoint sudden-power-off If SPO occurs after checkpoint is finished, SIT bitmap will be set incorrectly. Signed-off-by: NSheng Yong <shengyong1@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yunlei He 提交于
[ Upstream commit b61ac5b720146c619c7cdf17eff2551b934399e5 ] This patch move dir data flush to write checkpoint process, by doing this, it may reduce some time for dir fsync. pre: -f2fs_do_sync_file enter -file_write_and_wait_range <- flush & wait -write_checkpoint -do_checkpoint <- wait all -f2fs_do_sync_file exit now: -f2fs_do_sync_file enter -write_checkpoint -block_operations <- flush dir & no wait -do_checkpoint <- wait all -f2fs_do_sync_file exit Signed-off-by: NYunlei He <heyunlei@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Bob Peterson 提交于
[ Upstream commit 216f0efd19b9cc32207934fd1b87a45f2c4c593e ] Before this patch, recovery would cause all callbacks to be delayed, put on a queue, and afterward they were all queued to the callback work queue. This patch does the same thing, but occasionally takes a break after 25 of them so it won't swamp the CPU at the expense of other RT processes like corosync. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 07 2月, 2019 9 次提交
-
-
由 Paulo Alcantara 提交于
commit 28eb24ff75c5ac130eb326b3b4d0dcecfc0f427d upstream. In case a hostname resolves to a different IP address (e.g. long running mounts), make sure to resolve it every time prior to calling generic_ip_connect() in reconnect. Suggested-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NPaulo Alcantara <palcantara@suse.de> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric W. Biederman 提交于
commit 532b618bdf237250d6d4566536d4b6ce3d0a31fe upstream. The subvol_name is allocated in btrfs_parse_subvol_options and is consumed and freed in mount_subvol. Add a free to the error paths that don't call mount_subvol so that it is guaranteed that subvol_name is freed when an error happens. Fixes: 312c89fb ("btrfs: cleanup btrfs_mount() using btrfs_mount_root()") Cc: stable@vger.kernel.org # v4.19+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Filipe Manana 提交于
commit a6279470762c19ba97e454f90798373dccdf6148 upstream. When splitting a leaf or node from one of the trees that are modified when flushing pending block groups (extent, chunk, device and free space trees), we need to allocate a new tree block, which in turn can result in the need to allocate a new block group. After allocating the new block group we may need to flush new block groups that were previously allocated during the course of the current transaction, which is what may cause a deadlock due to attempts to write lock twice the same leaf or node, as when splitting a leaf or node we are holding a write lock on it and its parent node. The same type of deadlock can also happen when increasing the tree's height, since we are holding a lock on the existing root while allocating the tree block to use as the new root node. An example trace when the deadlock happens during the leaf split path is: [27175.293054] CPU: 0 PID: 3005 Comm: kworker/u17:6 Tainted: G W 4.19.16 #1 [27175.293942] Hardware name: Penguin Computing Relion 1900/MD90-FS0-ZB-XX, BIOS R15 06/25/2018 [27175.294846] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs] (...) [27175.298384] RSP: 0018:ffffab2087107758 EFLAGS: 00010246 [27175.299269] RAX: 0000000000000bbd RBX: ffff9fadc7141c48 RCX: 0000000000000001 [27175.300155] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9fadc7141c48 [27175.301023] RBP: 0000000000000001 R08: ffff9faeb6ac1040 R09: ffff9fa9c0000000 [27175.301887] R10: 0000000000000000 R11: 0000000000000040 R12: ffff9fb21aac8000 [27175.302743] R13: ffff9fb1a64d6a20 R14: 0000000000000001 R15: ffff9fb1a64d6a18 [27175.303601] FS: 0000000000000000(0000) GS:ffff9fb21fa00000(0000) knlGS:0000000000000000 [27175.304468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27175.305339] CR2: 00007fdc8743ead8 CR3: 0000000763e0a006 CR4: 00000000003606f0 [27175.306220] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27175.307087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27175.307940] Call Trace: [27175.308802] btrfs_search_slot+0x779/0x9a0 [btrfs] [27175.309669] ? update_space_info+0xba/0xe0 [btrfs] [27175.310534] btrfs_insert_empty_items+0x67/0xc0 [btrfs] [27175.311397] btrfs_insert_item+0x60/0xd0 [btrfs] [27175.312253] btrfs_create_pending_block_groups+0xee/0x210 [btrfs] [27175.313116] do_chunk_alloc+0x25f/0x300 [btrfs] [27175.313984] find_free_extent+0x706/0x10d0 [btrfs] [27175.314855] btrfs_reserve_extent+0x9b/0x1d0 [btrfs] [27175.315707] btrfs_alloc_tree_block+0x100/0x5b0 [btrfs] [27175.316548] split_leaf+0x130/0x610 [btrfs] [27175.317390] btrfs_search_slot+0x94d/0x9a0 [btrfs] [27175.318235] btrfs_insert_empty_items+0x67/0xc0 [btrfs] [27175.319087] alloc_reserved_file_extent+0x84/0x2c0 [btrfs] [27175.319938] __btrfs_run_delayed_refs+0x596/0x1150 [btrfs] [27175.320792] btrfs_run_delayed_refs+0xed/0x1b0 [btrfs] [27175.321643] delayed_ref_async_start+0x81/0x90 [btrfs] [27175.322491] normal_work_helper+0xd0/0x320 [btrfs] [27175.323328] ? move_linked_works+0x6e/0xa0 [27175.324160] process_one_work+0x191/0x370 [27175.324976] worker_thread+0x4f/0x3b0 [27175.325763] kthread+0xf8/0x130 [27175.326531] ? rescuer_thread+0x320/0x320 [27175.327284] ? kthread_create_worker_on_cpu+0x50/0x50 [27175.328027] ret_from_fork+0x35/0x40 [27175.328741] ---[ end trace 300a1b9f0ac30e26 ]--- Fix this by preventing the flushing of new blocks groups when splitting a leaf/node and when inserting a new root node for one of the trees modified by the flushing operation, similar to what is done when COWing a node/leaf from on of these trees. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202383Reported-by: NEli V <eliventer@gmail.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andreas Gruenbacher 提交于
commit e74c98ca2d6ae4376cc15fa2a22483430909d96b upstream. This reverts commit 2d29f6b96d8f80322ed2dd895bca590491c38d34. It turns out that the fix can lead to a ~20 percent performance regression in initial writes to the page cache according to iozone. Let's revert this for now to have more time for a proper fix. Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Trond Myklebust 提交于
commit 8fc75bed96bb94e23ca51bd9be4daf65c57697bf upstream. Ensure that we return the fatal error value that caused us to exit nfs_page_async_flush(). Fixes: c373fff7 ("NFSv4: Don't special case "launder"") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Waiman Long 提交于
commit 1dbd449c9943e3145148cc893c2461b72ba6fef0 upstream. The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all." Cc: stable@kernel.org Signed-off-by: NWaiman Long <longman@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pavel Shilovsky 提交于
commit 082aaa8700415f6471ec9c5ef0c8307ca214989a upstream. When doing reads beyound the end of a file the server returns error STATUS_END_OF_FILE error which is mapped to -ENODATA. Currently we report it as a failure which confuses read stats. Change it to not consider -ENODATA as failure for stat purposes. Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pavel Shilovsky 提交于
commit 7d42e72fe8ee5ab70b1af843dd7d8615e6fb0abe upstream. Currently we log success once we send an async IO request to the server. Instead we need to analyse a response and then log success or failure for a particular command. Also fix argument list for read logging. Cc: <stable@vger.kernel.org> # 4.18 Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pavel Shilovsky 提交于
commit 8e6e72aeceaaed5aeeb1cb43d3085de7ceb14f79 upstream. Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 1月, 2019 2 次提交
-
-
由 Ronnie Sahlberg 提交于
commit 2e5700bdde438ed708b36d8acd0398dc73cbf759 upstream. Otherwise we gradually leak credits leading to potential hung session. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pavel Shilovsky 提交于
commit ef68e831840c40c7d01b328b3c0f5d8c4796c232 upstream. When executing add_credits() we currently call cifs_reconnect() if the number of credits is zero and there are no requests in flight. In this case we may call cifs_reconnect() recursively twice and cause memory corruption given the following sequence of functions: mid1.callback() -> add_credits() -> cifs_reconnect() -> -> mid2.callback() -> add_credits() -> cifs_reconnect(). Fix this by avoiding to call cifs_reconnect() in add_credits() and checking for zero credits in the demultiplex thread. Cc: <stable@vger.kernel.org> Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-