- 22 3月, 2006 18 次提交
-
-
由 Mark Salazar 提交于
Modules: ES18xx driver Second of 4 es18xx.c patches culminating in Zoom Video support. This patch changes the 'record source' mux routines to reflect the fact that not all of the supported chipsets have 8 possible inputs. Some have 4 and some have 5. Testing: This work was initially done on the source from the Debian Sarge ALSA package, then tested on an ES1879 and an ES1878 machine. Patches were created against the Sarge code and then edited to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs code was test for successful compilation. No additional testing was done on the ALSA cvs version. Signed-off-by: NMark Salazar <markTheCoder@justmyself.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Salazar 提交于
Modules: ES18xx driver First of 4 es18xx.c patches culminating in Zoom Video support. While adding support for Zoom Video to the es18xx driver I found some of the mixer controls were wrong. Since you guys went to the trouble of supplying the datasheets for the supported chipsets I did a review of all of them and tried to get es18xx.c to accurately reflect the proper mixer controls for each chipset. If the datasheets are wrong then so are my patches. This first patch moves some controls from the common-to-all-chipsets array 'snd_es18xx_base_controls' to a chipset-specific array and adds code to manage that new array. Also while testing on my ES1878 test machine I discovered it needed a couple of udelays in the identify function so those are in this patch as well. Testing: This work was initially done on the source from the Debian Sarge ALSA package, then tested on an ES1879 and an ES1878 machine. Patches were created against the Sarge code and then edited to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs code was test for successful compilation. No additional testing was done on the ALSA cvs version. Signed-off-by: NMark Salazar <markTheCoder@justmyself.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Add a quirk entry for the Edirol PC-50. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: au88x0 driver Fix the driver codes to run on 64bit architectures. The patch taken from ALSA BTS bug#1047. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation Updated the description of ice1724 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ICE1712 driver Added the support of Prodigy-7.1LT board. The patch taken from ALSA BTS bug#1090. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ALSA<-OSS emulation Clean up pcm-oss plugin codes. Removed dead codes, and simplified route/rate plugins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ALSA<-OSS emulation Fixed a typo. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: ALSA Core,PCM Midlevel,ALSA<-OSS emulation,USB generic driver 1) The verbose procfs code for the PCM midlevel and usb audio can be removed now (more patches will follow). CONFIG_SND_VERBOSE_PROCFS 2) The PCM OSS plugin system can be also compiled optionaly. CONFIG_SND_PCM_OSS_PLUGINS Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Modules: YMFPCI driver The routing of the effect 2/3 channels to the digital output is the opposite of the rear analog output (left/right swapped). We make the order correct for the digital output (which will make the analog rear have the channels swapped) to make AC3 output work. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,HDA Intel driver Added single_cmd module option for debugging in the case CORB/RIRB doesn't work well (e.g. due to wrong irq routings). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Intel8x0 driver Fix the detection of tertriary codec on SIS7012, including clean-ups of relevant codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ENS1370/1+ driver Fix resume of ens1370 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Move the common packet size calculation code from prepare_startup_playback_urb() and prepare_playback_urb() to a new function. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Move some entries around to keep them sorted by ID. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Brent Cook 提交于
Modules: USB generic driver This is my naive attempt at adding ALSA device support. The attached patch provides support for the EDIROL UM-3ex. This is a 3-port USB midi interface with a built-in USB hub and the ability to chain 2 other UM-3x's in a master-slave configuration. I only have one, so I do not know how this works in practice. Though this is a 3-port device, I had to throw in that 4th 'Control' interface to the definition in order to make the 3rd port work. If I set in/out_cables to 0x000b, a 3rd interface appears on the driver, but it does nothing. Changing it to 0x000f allows the 3rd interface to work, but of course interface 4 does not work because it does not exist. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Digigram PCXHR driver Suppress debug messages. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 3月, 2006 4 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits) [SPARC64]: Update defconfig. [SPARC64]: Fix 2 bugs in huge page support. [SPARC64]: CONFIG_BLK_DEV_RAM fix [SPARC64]: Optimized TSB table initialization. [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build. [SPARC64]: Use SLAB caches for TSB tables. [SPARC64]: Don't kill the page allocator when growing a TSB. [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set. [SPARC64]: Increase top of 32-bit process stack. [SPARC64]: Top-down address space allocation for 32-bit tasks. [SPARC64] bbc_i2c: Fix cpu check and add missing module license. [SPARC64]: Fix and re-enable dynamic TSB sizing. [SUNSU]: Fix missing spinlock initialization. [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts. [SPARC64]: First cut at VIS simulator for Niagara. [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check. [SPARC64]: Add SMT scheduling support for Niagara. [SPARC64]: Fix 32-bit truncation which broke sparsemem. [SPARC64]: Move over to sparsemem. [SPARC64]: Fix new context version SMP handling. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: add uid, gid, and umask mount options JFS: Take logsync lock before testing mp->lsn JFS: kzalloc conversion JFS: Add missing file from fa3241d2 JFS: Use the kthread_ API JFS: Fix regression. fsck complains if symlinks do not have INLINEEA attribute JFS: ext2 inode attributes for jfs JFS: semaphore to mutex conversion. JFS: make buddy table static JFS: Add back directory i_size calculations for legacy partitions
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits) [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2 [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h [PATCH] ipw2100: semaphore to mutexes conversion [PATCH] ipw2100: Fix radiotap code gcc warning [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode [PATCH] ipw2x00: expend Copyright to 2006 [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun [PATCH] ieee80211: Don't update network statistics from off-channel packets. [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1 [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format [PATCH] ipw2200: wireless extension sensitivity threshold support [PATCH] ipw2200: Enables the "slow diversity" algorithm [PATCH] ipw2200: Set a meaningful silence threshold value [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG [PATCH] ipw2200: Change debug level for firmware error logging [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1' [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking [PATCH] ipw2200: Add signal level to iwlist scan output ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/block由 Linus Torvalds 提交于
* 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block: [PATCH] fix rmmod problems with elevator attributes, clean them up [PATCH] elevator_t lifetime rules and sysfs fixes [PATCH] noise removal: cfq-iosched.c [PATCH] don't bother with refcounting for cfq_data [PATCH] fix sysfs interaction and lifetime rules handling for queues [PATCH] regularize blk_cleanup_queue() use [PATCH] fix cfq_get_queue()/ioprio_set(2) races [PATCH] deal with rmmod/put_io_context() races [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking [PATCH] stop cfq from pinning queue down [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue [PATCH] fix the exclusion for ioprio_set() [PATCH] keep sync and async cfq_queue separate [PATCH] switch to use of ->key to get cfq_data by cfq_io_context [PATCH] stop leaking cfq_data in cfq_set_request() [PATCH] fix cfq hash lookups [PATCH] fix locking in queue_requests_store() [PATCH] fix double-free in blk_init_queue_node() [PATCH] don't do exit_io_context() until we know we won't be doing any IO
-
- 20 3月, 2006 18 次提交
-
-
由 Jeff Garzik 提交于
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
1) huge_pte_offset() did not check the page table hierarchy elements as being empty correctly, resulting in an OOPS 2) Need platform specific hugetlb_get_unmapped_area() to handle the top-down vs. bottom-up address space allocation strategies. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
init/do_mounts_rd.c depends upon CONFIG_BLK_DEV_RAM, not CONFIG_BLK_DEV_INITRD. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We only need to write an invalid tag every 16 bytes, so taking advantage of this can save many instructions compared to the simple memset() call we make now. A prefetching implementation is implemented for sun4u and a block-init store version if implemented for Niagara. The next trick is to be able to perform an init and a copy_tsb() in parallel when growing a TSB table. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
online_page() is straightforward, and then add a dummy remove_memory() that returns -EINVAL just like i386. There is no point in implementing remove_memory() since __remove_pages() has no implementation either. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Try only lightly on > 1 order allocations. If a grow fails, we are under memory pressure, so do not try to grow the TSB for this address space any more. If a > 0 order TSB allocation fails on a new fork, retry using a 0 order allocation. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Put it one page below the top of the 32-bit address space. This gives us ~16MB more address space to work with. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Currently allocations are very constrained for 32-bit processes. It grows down-up from 0x70000000 to 0xf0000000 which gives about 2GB of stack + dynamic mmap() space. So support the top-down method, and we need to override the generic helper function in order to deal with D-cache coloring. With these changes I was able to squeeze out a mmap() just over 3.6GB in size in a 32-bit process. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Should allow cheetah_plus cpu types and don't taint the kernel. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This is good for up to %50 performance improvement of some test cases. The problem has been the race conditions, and hopefully I've plugged them all up here. 1) There was a serious race in switch_mm() wrt. lazy TLB switching to and from kernel threads. We could erroneously skip a tsb_context_switch() and thus use a stale TSB across a TSB grow event. There is a big comment now in that function describing exactly how it can happen. 2) All code paths that do something with the TSB need to be guarded with the mm->context.lock spinlock. This makes page table flushing paths properly synchronize with both TSB growing and TLB context changes. 3) TSB growing events are moved to the end of successful fault processing. Previously it was in update_mmu_cache() but that is deadlock prone. At the end of do_sparc64_fault() we hold no spinlocks that could deadlock the TSB grow sequence. We also have dropped the address space semaphore. While we're here, add prefetching to the copy_tsb() routine and put it in assembler into the tsb.S file. This piece of code is quite time critical. There are some small negative side effects to this code which can be improved upon. In particular we grab the mm->context.lock even for the tsb insert done by update_mmu_cache() now and that's a bit excessive. We can get rid of that locking, and the same lock taking in flush_tsb_user(), by disabling PSTATE_IE around the whole operation including the capturing of the tsb pointer and tsb_nentries value. That would work because anyone growing the TSB won't free up the old TSB until all cpus respond to the TSB change cross call. I'm not quite so confident in that optimization to put it in right now, but eventually we might be able to and the description is here for reference. This code seems very solid now. It passes several parallel GCC bootstrap builds, and our favorite "nut cruncher" stress test which is a full "make -j8192" build of a "make allmodconfig" kernel. That puts about 256 processes on each cpu's run queue, makes lots of process cpu migrations occur, causes lots of page table and TLB flushing activity, incurs many context version number changes, and it swaps the machine real far out to disk even though there is 16GB of ram on this test system. :-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Caught by CONFIG_DEBUG_SPINLOCK. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sun does't put an SEEPROM behind the tigon3 chip, among other things, so accesses to these areas just give bus timeouts. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Niagara does not implement some of the VIS instructions in hardware, so we have to emulate them. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Report 'sun4v' when appropriate in /proc/cpuinfo Remove all the verifications of the OBP version string. Just make sure it's there, and report it raw in the bootup logs and via /proc/cpuinfo. Signed-off-by: NDavid S. Miller <davem@davemloft.net>