提交 27346166 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] hda-intel - Add single_cmd option for debugging

Modules: Documentation,HDA Intel driver

Added single_cmd module option for debugging in the case CORB/RIRB
doesn't work well (e.g. due to wrong irq routings).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 84a43bd5
......@@ -671,6 +671,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
single_cmd - Use single immediate commands to communicate with
codecs (for debugging only)
This module supports one card and autoprobe.
......@@ -723,6 +725,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
(Usually SD_LPLIB register is more accurate than the
position buffer.)
NB: If you get many "azx_get_response timeout" messages at
loading, it's likely a problem of interrupts (e.g. ACPI irq
routing). Try to boot with options like "pci=noacpi". Also, you
can try "single_cmd=1" module option. This will switch the
communication method between HDA controller and codecs to the
single immediate commands instead of CORB/RIRB. Basically, the
single command mode is provided only for BIOS, and you won't get
unsolicited events, too. But, at least, this works independently
from the irq. Remember this is a last resort, and should be
avoided as much as possible...
The power-management is supported.
Module snd-hdsp
......
......@@ -53,6 +53,7 @@ static char *id = SNDRV_DEFAULT_STR1;
static char *model;
static int position_fix;
static int probe_mask = -1;
static int single_cmd;
module_param(index, int, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
......@@ -64,6 +65,8 @@ module_param(position_fix, int, 0444);
MODULE_PARM_DESC(position_fix, "Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size).");
module_param(probe_mask, int, 0444);
MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1).");
module_param(single_cmd, bool, 0444);
MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs (for debugging only).");
/* just for backward compatibility */
......@@ -234,12 +237,6 @@ enum {
#define NVIDIA_HDA_TRANSREG_ADDR 0x4e
#define NVIDIA_HDA_ENABLE_COHBITS 0x0f
/*
* Use CORB/RIRB for communication from/to codecs.
* This is the way recommended by Intel (see below).
*/
#define USE_CORB_RIRB
/*
*/
......@@ -325,6 +322,7 @@ struct azx {
/* flags */
int position_fix;
unsigned int initialized: 1;
unsigned int single_cmd: 1;
};
/* driver types */
......@@ -388,7 +386,6 @@ static char *driver_short_names[] __devinitdata = {
* Interface for HD codec
*/
#ifdef USE_CORB_RIRB
/*
* CORB / RIRB interface
*/
......@@ -436,11 +433,7 @@ static void azx_init_cmd_io(struct azx *chip)
/* set N=1, get RIRB response interrupt for new entry */
azx_writew(chip, RINTCNT, 1);
/* enable rirb dma and response irq */
#ifdef USE_CORB_RIRB
azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
#else
azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN);
#endif
chip->rirb.rp = chip->rirb.cmds = 0;
}
......@@ -528,7 +521,6 @@ static unsigned int azx_get_response(struct hda_codec *codec)
return chip->rirb.res; /* the last value */
}
#else
/*
* Use the single immediate command instead of CORB/RIRB for simplicity
*
......@@ -539,13 +531,10 @@ static unsigned int azx_get_response(struct hda_codec *codec)
* I left the codes, however, for debugging/testing purposes.
*/
#define azx_alloc_cmd_io(chip) 0
#define azx_init_cmd_io(chip)
#define azx_free_cmd_io(chip)
/* send a command */
static int azx_send_cmd(struct hda_codec *codec, hda_nid_t nid, int direct,
unsigned int verb, unsigned int para)
static int azx_single_send_cmd(struct hda_codec *codec, hda_nid_t nid,
int direct, unsigned int verb,
unsigned int para)
{
struct azx *chip = codec->bus->private_data;
u32 val;
......@@ -573,7 +562,7 @@ static int azx_send_cmd(struct hda_codec *codec, hda_nid_t nid, int direct,
}
/* receive a response */
static unsigned int azx_get_response(struct hda_codec *codec)
static unsigned int azx_single_get_response(struct hda_codec *codec)
{
struct azx *chip = codec->bus->private_data;
int timeout = 50;
......@@ -588,10 +577,6 @@ static unsigned int azx_get_response(struct hda_codec *codec)
return (unsigned int)-1;
}
#define azx_update_rirb(chip)
#endif /* USE_CORB_RIRB */
/* reset codec link */
static int azx_reset(struct azx *chip)
{
......@@ -737,7 +722,8 @@ static void azx_init_chip(struct azx *chip)
azx_int_enable(chip);
/* initialize the codec command I/O */
azx_init_cmd_io(chip);
if (! chip->single_cmd)
azx_init_cmd_io(chip);
/* program the position buffer */
azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
......@@ -796,7 +782,7 @@ static irqreturn_t azx_interrupt(int irq, void* dev_id, struct pt_regs *regs)
/* clear rirb int */
status = azx_readb(chip, RIRBSTS);
if (status & RIRB_INT_MASK) {
if (status & RIRB_INT_RESPONSE)
if (! chip->single_cmd && (status & RIRB_INT_RESPONSE))
azx_update_rirb(chip);
azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
}
......@@ -913,8 +899,13 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model)
bus_temp.private_data = chip;
bus_temp.modelname = model;
bus_temp.pci = chip->pci;
bus_temp.ops.command = azx_send_cmd;
bus_temp.ops.get_response = azx_get_response;
if (chip->single_cmd) {
bus_temp.ops.command = azx_single_send_cmd;
bus_temp.ops.get_response = azx_single_get_response;
} else {
bus_temp.ops.command = azx_send_cmd;
bus_temp.ops.get_response = azx_get_response;
}
if ((err = snd_hda_bus_new(chip->card, &bus_temp, &chip->bus)) < 0)
return err;
......@@ -1316,7 +1307,8 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state)
for (i = 0; i < chip->pcm_devs; i++)
snd_pcm_suspend_all(chip->pcm[i]);
snd_hda_suspend(chip->bus, state);
azx_free_cmd_io(chip);
if (! chip->single_cmd)
azx_free_cmd_io(chip);
pci_disable_device(pci);
pci_save_state(pci);
return 0;
......@@ -1354,7 +1346,8 @@ static int azx_free(struct azx *chip)
azx_int_clear(chip);
/* disable CORB/RIRB */
azx_free_cmd_io(chip);
if (! chip->single_cmd)
azx_free_cmd_io(chip);
/* disable position buffer */
azx_writel(chip, DPLBASE, 0);
......@@ -1422,6 +1415,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
chip->driver_type = driver_type;
chip->position_fix = position_fix ? position_fix : POS_FIX_POSBUF;
chip->single_cmd = single_cmd;
#if BITS_PER_LONG != 64
/* Fix up base address on ULI M5461 */
......@@ -1492,8 +1486,9 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
goto errout;
}
/* allocate CORB/RIRB */
if ((err = azx_alloc_cmd_io(chip)) < 0)
goto errout;
if (! chip->single_cmd)
if ((err = azx_alloc_cmd_io(chip)) < 0)
goto errout;
/* initialize streams */
azx_init_stream(chip);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册