Signed-off-by: NAndreas Langer <an.langer@gmx.de>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndreas Langer <an.langer@gmx.de>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The unicast_frag_send_skb() function expected 'raw' packets (without any
batman-adv header) to fragment them. This needs to be changed, so that
this function is able to fragment packets that already traveled inside
the mesh but need to be fragmented now.
Signed-off-by: NAndreas Langer <an.langer@gmx.de>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We call a lot of the netdevice code when holding if_list_lock which will
spin the whole time. This is not necessary because we only want to
protect the access to the list to be serialized. An extra queue can be
used which hold all interfaces which should be removed and then use that
queue without any locks for netdevice cleanup.
Reported-by: NRafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

eth_type_trans tries to pull data with the length of the ethernet header
from the skb. We only ensured that enough data for the first ethernet
header and the batman header is available in non-paged memory of the skb
and not for the ethernet after the batman header.

eth_type_trans would fail sometimes with drivers which don't ensure that
all there data is perfectly linearised.
Reported-by: NRafal Lesniak <lesniak@eresi-project.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Andrew Lunn didn't submit patches to staging since a while and may not
be the right person for new patches.
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unused sign member from chip specific information structure
Fix typos
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Initial support for single channel, 12-/14-/16-Bit nanoDAC with On-Chip Reference

staging: iio: dac: ad5446: Fix according to review feedback

Review feedback by Jonathan Cameron:
	Use kernel doc style to document headers.
	Turn data into a union
	Add some comments for clarity
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Change to capital syntax for documetation e.g. 'inX-inY_raw'
Use multiple 'What:' entries rather than wild cards or options so
as to make the documentation clearer and easier to search.
Some trivial spelling fixes.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Unusual element is addition of 'negate' and 'axis' platform data
to ensure we support all the functionality of the adis16255 driver
currently in staging.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NMatthias Brugger <mensch0815@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Enable support for AD7887:  SPI Micropower, 2-Channel, 125 kSPS, 12-Bit ADC

staging: iio: adc: Fix according to review feedback

Review feedback by Jonathan Cameron:
	Combine statements.
	Document struct members.
	Remove redundant variable initialization.
	Simplify multichannel scan from ring logic.
	Fix coding style.

[v2]
staging: iio: adc: ad7887: Fix typos
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Enable support for AD5444 and AD5446:  12-/14-Bit High Bandwidth
Multiplying DACs with Serial Interface.

staging: iio: dac: Add support for AD5541A, AD5512A digital to analog convertors

staging: iio: dac: Fix according to review feedback

Review feedback by Jonathan Cameron:
	Remove spurious new line.
	Document struct members.
	Remove redundant variable initialization.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove duplicated #include('s) in
  drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

scu ipc driver fails sometimes to read/write. This add logs with register
addr and ret code when these errors occur.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

To avoid mismatch in driver and firmware error codes assign specfic values
to each enum.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The PCM interface in SST driver is cmds only, this patch changes the interface to open, close and cmd interface.
This allows SST driver to keep easy track of handles open
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver is for the Security Processor, a dedicated encryption
and decryption driver that is used on the Intel mobile platform.

This has been checked with checkpatch and there are four
warnings for lines over 80 charactors.

There is one compile warning. This is for a function that is
only used if the rar register driver is needed. There is an
ifdef in a header file that stubs out the rar register driver
if the rar register is not configured.

This driver does add a configuration, which is CONFIG_DX_SEP.
Signed-off-by: NMark Allyn <mark.a.allyn@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

clearpad_tm1217 driver uses many input_() interfaces, so it should
depend on INPUT.

clearpad_tm1217.c:(.text+0xf19ac): undefined reference to `input_unregister_device'
clearpad_tm1217.c:(.text+0xf1b19): undefined reference to `input_event'
clearpad_tm1217.c:(.text+0xf1b31): undefined reference to `input_event'
clearpad_tm1217.c:(.text+0xf1bb4): undefined reference to `input_event'
clearpad_tm1217.c:(.text+0xf1bf2): undefined reference to `input_event'
drivers/built-in.o:clearpad_tm1217.c:(.text+0xf1c08): more undefined references to `input_event' follow
clearpad_tm1217.c:(.text+0xf1df3): undefined reference to `input_allocate_device'
clearpad_tm1217.c:(.text+0xf1eac): undefined reference to `input_set_abs_params'
clearpad_tm1217.c:(.text+0xf1ed1): undefined reference to `input_set_abs_params'
clearpad_tm1217.c:(.text+0xf1ed8): undefined reference to `input_register_device'
clearpad_tm1217.c:(.text+0xf2040): undefined reference to `input_unregister_device'
clearpad_tm1217.c:(.text+0xf204b): undefined reference to `input_free_device'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Ramesh Agarwal <ramesh.agarwal@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fix following warning:
drivers/staging/ft1000/ft1000-usb/ft1000_usb.c:67:22:
warning: ‘pft1000info’ may be used uninitialized in this function
Signed-off-by: NMarek Belisko <marek.belisko@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stick to the 80 character line limit at least for code
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove depreciated macro from header
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Align DAC sysfs attributes naming with the convention used by ADC
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- removed PKTSETLEN macro and used __skb_trim call instead.
- removed unused macros PKTSETPOOL and PKTPOOL
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replacing PKTPUSH by skb_push() call and PKTPULL by skb_pull() call to make
it obvious what the operation is doing with the packet.
Reviewed-by: NHenry Ptasinski <henryp@broadcom.com>
Reviewed-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes the remaining bit of aava dependent and related bits from driver
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>