staging: brcm80211: unifdef -UBCMSDIO

Part of BMAC removal.
Signed-off-by: NBrett Rudley <brudley@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/sys/wl_mac80211.c

@@ -40,9 +40,6 @@
 #include <wlc_pub.h>
 #include <wlc_scb.h>
 #include <wl_dbg.h>
-#ifdef BCMSDIO
-#include <bcmsdh.h>
-#endif
 #include <wl_export.h>
 
 #include <wl_mac80211.h>
@@ -50,9 +47,6 @@
 #include <wl_ucode.h>
 #include <d11ucode_ext.h>
 
-#ifdef BCMSDIO
-extern struct device *sdiommc_dev;
-#endif
 
 extern void wlc_wme_setparams(wlc_info_t *wlc, u16 aci, void *arg,
 			      bool suspend);
@@ -127,7 +121,6 @@ MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 
-#ifndef BCMSDIO
 /* recognized PCI IDs */
 static struct pci_device_id wl_id_table[] = {
 	{PCI_VENDOR_ID_BROADCOM, 0x4357, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},	/* 43225 2G */
@@ -138,12 +131,7 @@ static struct pci_device_id wl_id_table[] = {
 
 MODULE_DEVICE_TABLE(pci, wl_id_table);
 static void wl_remove(struct pci_dev *pdev);
-#endif				/* !BCMSDIO */
 
-#ifdef BCMSDIO
-static uint sd_drivestrength = 6;
-module_param(sd_drivestrength, uint, 0);
-#endif
 
 #ifdef BCMDBG
 static int msglevel = 0xdeadbeef;
@@ -701,9 +689,6 @@ static wl_info_t *wl_attach(u16 vendor, u16 device, unsigned long regs,
 	tasklet_init(&wl->tasklet, wl_dpc, (unsigned long) wl);
 
 
-#ifdef BCMSDIO
-	SET_IEEE80211_DEV(hw, sdiommc_dev);
-#endif
 
 	base_addr = regs;
 
@@ -754,10 +739,6 @@ static wl_info_t *wl_attach(u16 vendor, u16 device, unsigned long regs,
 		WL_ERROR(("wl%d: Error setting MPC variable to 0\n",
 			  unit));
 	}
-#ifdef BCMSDIO
-	/* Set SDIO drive strength */
-	wlc_iovar_setint(wl->wlc, "sd_drivestrength", sd_drivestrength);
-#endif
 
 	/* register our interrupt handler */
 	if (request_irq(irq, wl_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) {
@@ -1048,7 +1029,6 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
 	return ieee_hw_rate_init(hw);
 }
 
-#ifndef BCMSDIO
 /**
  * determines if a device is a WL device, and if so, attaches it.
  *
@@ -1219,7 +1199,6 @@ static struct pci_driver wl_pci_driver = {
  .remove   = __devexit_p(wl_remove),
  .id_table = wl_id_table,
 };
-#endif				/* !BCMSDIO */
 
 /**
  * This is the main entry point for the WL driver.
@@ -1253,12 +1232,10 @@ static int __init wl_module_init(void)
 	}
 #endif				/* BCMDBG */
 
-#ifndef BCMSDIO
 	error = pci_register_driver(&wl_pci_driver);
 	if (!error)
 		return 0;
 
-#endif				/* !BCMSDIO */
 
 
 	return error;
@@ -1273,9 +1250,7 @@ static int __init wl_module_init(void)
  */
 static void __exit wl_module_exit(void)
 {
-#ifndef BCMSDIO
 	pci_unregister_driver(&wl_pci_driver);
-#endif				/* !BCMSDIO */
 
 }
 

drivers/staging/brcm80211/sys/wl_mac80211.h

@@ -75,10 +75,6 @@ struct wl_info {
 	atomic_t callbacks;	/* # outstanding callback functions */
 	struct wl_timer *timers;	/* timer cleanup queue */
 	struct tasklet_struct tasklet;	/* dpc tasklet */
-#ifdef BCMSDIO
-	bcmsdh_info_t *sdh;	/* pointer to sdio bus handler */
-	unsigned long flags;		/* current irq flags */
-#endif				/* BCMSDIO */
 	bool resched;		/* dpc needs to be and is rescheduled */
 #ifdef LINUXSTA_PS
 	u32 pci_psstate[16];	/* pci ps-state save/restore */

drivers/staging/brcm80211/sys/wlc_bmac.c

@@ -56,9 +56,6 @@
 #include <wl_export.h>
 #include "wl_ucode.h"
 #include "d11ucode_ext.h"
-#ifdef BCMSDIO
-#include <bcmsdh.h>
-#endif
 #include <bcmotp.h>
 
 /* BMAC_NOTE: With WLC_HIGH defined, some fns in this file make calls to high level
@@ -3209,9 +3206,7 @@ static inline u32 wlc_intstatus(wlc_info_t *wlc, bool in_isr)
 	 */
 	/* turn off the interrupts */
 	W_REG(osh, &regs->macintmask, 0);
-#ifndef BCMSDIO
 	(void)R_REG(osh, &regs->macintmask);	/* sync readback */
-#endif
 	wlc->macintmask = 0;
 
 	/* clear device interrupts */

drivers/staging/brcm80211/sys/wlc_cfg.h

@@ -55,22 +55,6 @@
 					 *      3       5356a0
 					 */
 
-#ifdef BCMSDIO
-#define D11CONF 0x100000
-#define SSLPNCONF 2
-#define GCCONF	0
-#define ACCONF	0
-#define NCONF	0
-#define LPCONF	0
-#define LCNCONF	0
-#define NTXD 32
-#define NRXD 16
-#define NRXBUFPOST 8
-#define WLC_DATAHIWAT 32
-#define RXBND 8
-#define MAXPKTCB 64
-#define AMPDU_NUM_MPDU 8
-#endif
 
 /* For undefined values, use defaults */
 #ifndef D11CONF

drivers/staging/brcm80211/sys/wlc_mac80211.c

@@ -48,11 +48,7 @@
 #include <wlc_ampdu.h>
 #include <wlc_event.h>
 #include <wl_export.h>
-#ifdef BCMSDIO
-#include <bcmsdh.h>
-#else
 #include "d11ucode_ext.h"
-#endif
 #include <wlc_alloc.h>
 #include <net/mac80211.h>
 #include <wl_dbg.h>

drivers/staging/brcm80211/sys/wlc_mac80211.h

@@ -480,9 +480,6 @@ struct wlc_hw_info {
 	bool phyclk;		/* phy is out of reset and has clock */
 	bool dma_lpbk;		/* core is in DMA loopback */
 
-#ifdef BCMSDIO
-	void *sdh;
-#endif
 	bool ucode_loaded;	/* true after ucode downloaded */
 
 

drivers/staging/brcm80211/sys/wlc_pub.h

@@ -318,9 +318,6 @@ typedef struct wlc_pub {
 				 * is implemented properly in osl of that port
 				 * when it enables this Power Save feature.
 				 */
-#ifdef BCMSDIO
-	uint sdiod_drive_strength;	/* SDIO drive strength */
-#endif				/* BCMSDIO */
 
 	u16 boardrev;	/* version # of particular board */
 	u8 sromrev;		/* version # of the srom */