- 16 7月, 2008 33 次提交
-
-
由 Atsushi Nemoto 提交于
Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Split out PCIC dependent code and SoC dependent code from board dependent code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code. Also fix some build problems on CONFIG_PCI=n. As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards and PCI66 support is available for all TX49 boards. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree. This will help more code sharing and maintainance. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
TXx9 GPIO set/get routines are spinlock-safe. This patch make gpio_direction_{input,output} routines also spinlock-safe so that they can be used during early board setup. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This shouldn't depend on CONFIG_MIPS_BOARDS_GEN which is about to go away. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
-ffunction-sections serves as a workaround for the problems caused by the limited branch range in some inline assembler fragments for very large compilation units. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Merge tx4927_pci.h into tx4927.h * Kill (broken) external PCI clock frequency reporting * Kill unnecessary wbflush() * Kill unnecessary includes * Kill debug garbages Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Declare pci_probe_only, etc. in asm-mips/pci.h file. This will fix some sparse warnings. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Create platform devices for audio and volume button driver. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
SGI-IP28 is running in so called slow mode, when kernel is started from the PROM. PROM calls must be done in slow mode otherwise the PROM will issue an error. To get better memory performance we now switch to normal mode, when the PROM is no longer needed. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The following errors were caught by sparse: >>>>>>>>>>> arch/mips/mips-boards/generic/display.c:30:6: warning: symbol 'mips_display_message' was not declared. Should it be static? arch/mips/mips-boards/generic/display.c:58:6: warning: symbol 'mips_scroll_message' was not declared. Should it be static? >>>>>>>>>>> This patch includes the asm/mips-boards/prom.h header file into arch/mips/mips-boards/generic/display.c. This adds the needed function declarations, and the errors are gone. Compile-tested using defconfigs for Malta, Atlas and SEAD boards. Runtime test was successfully performed by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The gcmp_probe() function is needlessly defined global, and this patch makes it static. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
Both the fill_ipi_map() routine and the gic_intr_map array defined in arch/mips/mips-boards/malta/malta_int.c are not used outside of the latter file. Thus, these objects can become static. Moreover, these two objects are used by the MT code only, which is why this patch adds the appropriate ifdef. While at it, this patch removes an unnecessary preprocessing macro in favor of the commonly used ARRAY_SIZE. Successfully tested using a Qemu-emulated Malta board for both SMP and UP kernels. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The following symbols hose_head hose_tail are needlessly defined global in arch/mips/pci/pci.c, and this patch makes them static. The variable pci_isa_hose is not used, and is removed by this patch. Spotted by namespacecheck. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The pit_clockevent symbol is needlessly defined global. This patch makes that variable static. Spotted by sparse. Compile-tested using Malta defconfig. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Both onboard controller of the O2 support FAST-20 transfer speeds, but the bit, which signals that to the aic driver, isn't set. Instead of adding detection code to the scsi driver, we just fake the missing bit in the PCI config space of the scsi chips. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Never terribly functional or popular, plagued by hard to fix bugs the time to say goodbye has more than arrived. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The following routines allocate_irqno() free_irqno() seem not to be used outside of the core kernel code, hence exporting these functions is pointless. This patch removes the export. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
The following routines uasm_rel_highest() uasm_rel_higher() are needlessly defined global. This patch makes them static. Compile-tested using a customized config for the Malta board. Booting the same board up to the shell prompt was also successful with this patch applied. Spotted by sparse. Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dmitri Vorobiev 提交于
This patch fixes the following sparse warning: <<<<<<<< arch/mips/kernel/early_printk.c:35:13: warning: symbol 'setup_early_printk' was not declared. Should it be static? <<<<<<<< The fix is to define a prototype of the setup_early_printk() function and to include the appropriate header into arch/mips/kernel/early_printk.c. [Ralf: Sorted includes again] Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
The isa_slot_offset variable and its __ISA_IO_base macro is not used anywhere anymore. It does not look like a decent interface per today's standards either. Remove both including all places of initialization. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
It is not used anywhere in tree. Signed-off-by: NDavid Daney <ddaney@avtrex.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 15 7月, 2008 2 次提交
-
-
由 Linus Torvalds 提交于
Even the help-text makes it clear that normal people shouldn't enable it. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This simplifies the code significantly, and was the whole point of the exercise. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 7月, 2008 5 次提交
-
-
由 Heiko Carstens 提交于
Most likely it is broken anyway because of the changes in memory detection. Since we can't test it and there are probably better ways that using a P390 card, remove support for it. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Michael Holzheu 提交于
Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Gerald Schaefer 提交于
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Jan Glauber 提交于
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-