[S390] Remove P390 support.

Most likely it is broken anyway because of the changes in memory
detection. Since we can't test it and there are probably better ways
that using a P390 card, remove support for it.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/kernel/early.c

@@ -183,10 +183,6 @@ static noinline __init void detect_machine_type(void)
 	if (cpuinfo->cpu_id.version == 0xff)
 		machine_flags |= MACHINE_FLAG_VM;
 
-	/* Running on a P/390 ? */
-	if (cpuinfo->cpu_id.machine == 0x7490)
-		machine_flags |= MACHINE_FLAG_P390;
-
 	/* Running under KVM ? */
 	if (cpuinfo->cpu_id.version == 0xfe)
 		machine_flags |= MACHINE_FLAG_KVM;

arch/s390/kernel/setup.c

@@ -205,12 +205,6 @@ static void __init conmode_default(void)
 			SET_CONSOLE_SCLP;
 #endif
 		}
-        } else if (MACHINE_IS_P390) {
-#if defined(CONFIG_TN3215_CONSOLE)
-		SET_CONSOLE_3215;
-#elif defined(CONFIG_TN3270_CONSOLE)
-		SET_CONSOLE_3270;
-#endif
 	} else {
 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
 		SET_CONSOLE_SCLP;

drivers/s390/char/con3215.c

@@ -373,7 +373,7 @@ raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	struct raw3215_req *req;
 	struct tty_struct *tty;
 	int cstat, dstat;
-	int count, slen;
+	int count;
 
 	raw = cdev->dev.driver_data;
 	req = (struct raw3215_req *) intparm;
@@ -390,8 +390,6 @@ raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 			break;
 		/* Attention interrupt, someone hit the enter key */
 		raw3215_mk_read_req(raw);
-		if (MACHINE_IS_P390)
-			memset(raw->inbuf, 0, RAW3215_INBUF_SIZE);
 		tasklet_schedule(&raw->tasklet);
 		break;
 	case 0x08:
@@ -414,11 +412,6 @@ raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 
 			tty = raw->tty;
 			count = 160 - req->residual;
-			if (MACHINE_IS_P390) {
-				slen = strnlen(raw->inbuf, RAW3215_INBUF_SIZE);
-				if (count > slen)
-					count = slen;
-			} else
 			EBCASC(raw->inbuf, count);
 			cchar = ctrlchar_handle(raw->inbuf, count, tty);
 			switch (cchar & CTRLCHAR_MASK) {

drivers/s390/char/sclp.c

@@ -883,8 +883,6 @@ sclp_init(void)
 	unsigned long flags;
 	int rc;
 
-	if (!MACHINE_HAS_SCLP)
-		return -ENODEV;
 	spin_lock_irqsave(&sclp_lock, flags);
 	/* Check for previous or running initialization */
 	if (sclp_init_state != sclp_init_state_uninitialized) {

drivers/s390/net/cu3088.c

@@ -36,7 +36,6 @@ const char *cu3088_type[] = {
 	"CTC/A",
 	"ESCON channel",
 	"FICON channel",
-	"P390 LCS card",
 	"OSA LCS card",
 	"CLAW channel device",
 	"unknown channel type",
@@ -49,7 +48,6 @@ static struct ccw_device_id cu3088_ids[] = {
 	{ CCW_DEVICE(0x3088, 0x08), .driver_info = channel_type_parallel },
 	{ CCW_DEVICE(0x3088, 0x1f), .driver_info = channel_type_escon },
 	{ CCW_DEVICE(0x3088, 0x1e), .driver_info = channel_type_ficon },
-	{ CCW_DEVICE(0x3088, 0x01), .driver_info = channel_type_p390 },
 	{ CCW_DEVICE(0x3088, 0x60), .driver_info = channel_type_osa2 },
 	{ CCW_DEVICE(0x3088, 0x61), .driver_info = channel_type_claw },
 	{ /* end of list */ }

drivers/s390/net/cu3088.h

@@ -17,9 +17,6 @@ enum channel_types {
 	/* Device is a FICON channel */
 	channel_type_ficon,
 
-	/* Device is a P390 LCS card */
-	channel_type_p390,
-
 	/* Device is a OSA2 card */
 	channel_type_osa2,
 

include/asm-s390/setup.h

@@ -65,7 +65,6 @@ extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM		(1UL << 0)
 #define MACHINE_FLAG_IEEE	(1UL << 1)
-#define MACHINE_FLAG_P390	(1UL << 2)
 #define MACHINE_FLAG_CSP	(1UL << 3)
 #define MACHINE_FLAG_MVPG	(1UL << 4)
 #define MACHINE_FLAG_DIAG44	(1UL << 5)
@@ -101,7 +100,6 @@ extern unsigned long machine_flags;
 #define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
 #endif /* __s390x__ */
 
-#define MACHINE_HAS_SCLP	(!MACHINE_IS_P390)
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
 
 /*