Rename headsmp-sh73a0.S into headsmp-scu.S and
introduce shmobile_secondary_vector_scu().

The goal is to be able to share the function
above between all mach-shmobile SoCs that use
SCU for SMP. So far only sh73a0 use this.

At this time the SCU base address is still hard
coded in headsmp-scu.S to 0xf0000000, but this
will be changed in the future.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

When booting secondary CPUs we have used the main CPU to set up the
Snoop Control Unit flags of these CPUs. It is a cleaner approach
if every CPU takes care of its own flags. We avoid the need for
locking and the program logic is more concise. With this patch the file
headsmp-sh73a0.S is added that contains a startup vector for secondary CPUs
that sets up its own SCU flags.
Further in sh73a0_smp_prepare_cpus() we can rely on the generic ARM helper
scu_power_mode(). This is possible as we don't cross borders anymore (every
CPU handles its own flags) and need no locking. So we can throw out the
needless function modify_scu_cpu_psr().
Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep. It is
entered by a simple dsb and wfi instruction via cpu_do_idle(). As just
clocks are stopped there is no need to save or restore any state of the
system.
Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Pinmux info for the sh73a0 is now provided by pinmux drivers. Remove the
duplicate copy in arch code.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Pinmux info for the sh7372 is now provided by pinmux drivers. Remove the
duplicate copy in arch code.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Pinmux info for the r8a7779 is now provided by pinmux drivers. Remove
the duplicate copy in arch code.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Pinmux info for the r8a7740 is now provided by pinmux drivers. Remove
the duplicate copy in arch code.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This is old CPU of shmobile, and the machine by which this CPU is
used cannot be obtained.
Therefore, remove SH7377 support.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This is old CPU of shmobile, and the machine by which this CPU is
used cannot be obtained.
Therefore, remove SH7367 support.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This machine is using old CPU of shmobile (sh7377) and cannot obtain
machine, either.
Therefore, remove G4EVM support.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This machine is using old CPU of shmobile (SH7367) and cannot obtain
machine, either.
Therefore, remove G3EVM support.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

The role of the only function in the common.c file in
arch/arm/mach-shmobile, shmobile_init_late(), is to call two
initializers whose definitions depend on kernel configuration
options.  Those initializers may very well be called from a static
inline function in arm/mach-shmobile/include/mach/common.h,
though, in which makes the code a bit easier to read.  Moreover,
the common.c may be dropped entirely then.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NMagnus Damm <damm@opensource.se>

This patch adds basic A4S pm domain support.
Now, below devices can be controled by PM

Common-SHwy, Common-HPB, BSC, MFI, MMFROM, HS-SHwy,
SYS-HPB, INTCA, DBSC, DDRPHY (Logic),
ATAPI, GbEther, AXI-bus
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This patch adds Renesas R-mobile series common PM domain APIs.
R-mobile CPU can use/switch this API
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This is V3 of Emma Mobile EV2 SMP support.

At this point only the most basic form of SMP operation
is supported. TWD and CPU Hotplug support is excluded.

Tied to both the Emma Mobile EV2 and the KZM9D board
due to the need to switch on board in platsmp.c and
the newly introduced need for static mappings.

The static mappings are needed to allow hardware
acces early during boot when SMP is initialized.
This early requirement forces us to also map in
the SMU registers.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

V3 of basic KZM9D board support. At this point a quite
thin layer that makes use of the Emma Mobile EV2 SoC code.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This is V3 of the Emma Mobile EV2 SoC support.
Included here is support for serial and timer
devices which is just about enough to boot a kernel.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This adds very basic KZM-A9-GT board (SH73a0) support
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NSimon Horman <horms@verge.net.au>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This adds very basic armadillo800eva board (R-Mobile A1) support
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NSimon Horman <horms@verge.net.au>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NMagnus Damm <damm@opensource.se>
Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>

Add support for the new smp_twd runtime registration interface
to the shmobile platforms, and remove the old compile-time support.

Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch contains r8a7779 SMP support V3 - now including
CPU hotplug offine and online support. The r8a7779 power
domain code is tied together with SMP glue code which allows
us to control the power domains via CPU hotplug.

At this point the kernel boots with the 4 Cortex-A9 cores in
SMP mode and all CPU cores except CPU0 can be hotplugged.

The code in platsmp.c is quite far from pretty, but it is
kept like that intentionally to avoid creating layers of
code that will go away in the near future anyway. The code
needs to be updated when some per-SoC handling code will be
added to the ARM architecture, see the following patch for
more information:
 "[RFC PATCH 0/3] Per SoC descriptor"
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add power domain control support for the r8a7779 SoC V2.

This adds support for 4 power domains for I/O Devices
together with code that can be used for CPU cores as well.

The only out of the ordinary experience is the need for
ioremap() of SYSC registers. Because of that we need to
execute some init function before setting up the domains.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add GPIO-only r8a7779 PFC support V2.

Only regular GPIOs are supported at this time. GPIO_FN are not
supported because they require variable bit width support in be
the shared pfc code.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Initial support for the r8a7779 SoC and the Marzen board (V2).

Only SCIF ports and the TMU are supported at this point.

To keep things simple only entity-mapped virt-to-phys mappings
are supported. This forces drivers and other SoC glue code to
make use of ioremap(). We cannot support early serial console
due to virtual address space collisions with the ARM kernel.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Convert the SMP shmobile platforms to use gic_handle_irq() instead
of the assembly macro.

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This adds basic bonito board (R-Mobile A1) support
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

R8A7740 GIC can not get external IRQx interrupt directly
without GIC - INTC demux support.

Current AG5 is using GIC - INTCS demux with
special irq relocation. but GIC - INTCA demux
is still not supported and it needs irq number re-mapping.

OTOH, normal INTC support as before is very enough for R8A7740,
because it is not SMP CPU.
This patch adds INTCA/INTCS support instead of GIC.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds PFC support for the R8A7740 (R-Mobile A1) CPU
This patch is based on v0.1 manual
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds preliminary support for the R8A7740 (R-Mobile A1) CPU

Timer, serial, gic, clock are supported at this point.
This patch is based on v0.1 manual
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The runtime PM platform support stub in use by ARM-based SH/R-Mobile
platforms contains nothing that's specifically ARM-related and instead of
wholly generic to anything using the clock framework.

The recent runtime PM changes interact rather badly with the lazy
disabling of clocks late in the boot process through the clock framework,
leading to situations where the runtime suspend/resume paths are entered
without a clock being actively driven due to having been lazily gated
off.

In order to correct this we can trivially tie in the aforementioned stub
as a general fallback for all SH platforms that don't presently have
their own runtime PM implementations (the corner case being SH-based
SH-Mobile platforms, which have their own stub through the hwblk API --
which in turn has bitrotted and will be subsequently adapted to use the
same stub as everyone else), regardless of whether the platforms choose
to define power domains of their own or not.

This fixes up regressions for clock framework users who also build in
runtime PM support without any specific power domains of their own, which
was previously causing the serial console to be lost when warring with
lazy clock disabling.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Kota2 base board support including the on-chip SCIFA2
serial console and the on-board SMSC911X ethernet port.

The s73a0 SMP bits are also updated to include Kota2.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds a shared SH-Mobile ARM specific CPUIdle
implementation supporting WFI only at this point. It
serves as a common point for late registration of the
arch-specific CPUIdle code, and supports adding extra
sleep modes using the callback shmobile_cpuidle_setup()
together with shmobile_cpuidle_modes[].
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add sh7372 Core Standby sleep mode support and tie it
in with the shared SH-Mobile ARM suspend code.

The Core Standby mode is the lightest sh7372-specific
sleep mode, cutting power to the ARM core excluding the
L2 cache. Any interrupt source can be used for wakeups.

The low level portion of this code is based on the
TI OMAP sleep code in sleep34xx.S, thanks to them.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds a simple Suspend-to-RAM implementation
for SH-Mobile ARM. The struct shmobile_suspend_ops are
kept global to allow cpu-specific code to override
the callbacks if needed.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Break-out GIC specific IRQ demux code from the file
entry-macro-intc.S and register during run-time.

Covers sh73a0.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Break-out INTC specific IRQ demux code from the file
entry-macro-intc.S and register during run-time.

Covers sh7367, sh7377 and sh7372.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add INTCS support for the sh73a0 processor.

The interrupts on the sh73a0 processor are managed
through controllers such as GIC, INTCS and INTCA.

The ARM cores use the GIC as primary interrupt
controller and the INTCS and INTCA are hanging off
the GIC as cascaded interrupt controllers.

Peripherals connected both to the GIC and the INTC
controllers should if possible only use the GIC.

If no GIC connection is available then INTCS and
INTCA may be used instead.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add SMP support for ag5evm and the sh73a0 processor.

Onlining and offlining works well, but at this point
offlined processor cores are not put into sleep mode.

There is no spinlock for syncing the secondary core
with the first one in this implementation. The code
instead relies on the cpu_online() check in __cpu_up().
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add SMP base support for R-Mobile / SH-Mobile processors.

This patch contains all base code to support CONFIG_SMP
regardless of ARCH_SHMOBILE processor type. Both local timer
and CPU hotplug are supported, but no processor specific
code is included.

At this point only the default behavior is in place, so
a single core will always be used even though CONFIG_SMP
is enabled on multicore systems.

The SMP Kconfig entry for arch/arm/Kconfig is excluded from
this patch to simplify merging.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>