提交 631a7b5d 编写于 作者: N Nobuhiro Iwamatsu 提交者: Simon Horman

ARM: shmobile: Remove G4EVM machine support

This machine is using old CPU of shmobile (sh7377) and cannot obtain
machine, either.
Therefore, remove G4EVM support.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
上级 6a800a0b
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_SH7377=y
CONFIG_MACH_G4EVM=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
CONFIG_KEXEC=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=8
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
# CONFIG_CRC32 is not set
......@@ -50,12 +50,6 @@ config ARCH_EMEV2
comment "SH-Mobile Board Type"
config MACH_G4EVM
bool "G4EVM board"
depends on ARCH_SH7377
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_AP4EVB
bool "AP4EVB board"
depends on ARCH_SH7372
......@@ -142,7 +136,7 @@ menu "Memory configuration"
config MEMORY_START
hex "Physical memory start address"
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x41000000" if MACH_KOTA2
......@@ -154,7 +148,6 @@ config MEMORY_START
config MEMORY_SIZE
hex "Physical memory size"
default "0x08000000" if MACH_G4EVM
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x1e000000" if MACH_KOTA2
......
......@@ -45,7 +45,6 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o
# Board objects
obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
......
/*
* G4EVM board support
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2008 Yoshihiro Shimoda
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
#include <mach/irqs.h>
#include <mach/sh7377.h>
#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "sh-gpio.h"
/*
* SDHI
*
* SDHI0 : card detection is possible
* SDHI1 : card detection is impossible
*
* [G4-MAIN-BOARD]
* JP74 : short # DBG_2V8A for SDHI0
* JP75 : NC # DBG_3V3A for SDHI0
* JP76 : NC # DBG_3V3A_SD for SDHI0
* JP77 : NC # 3V3A_SDIO for SDHI1
* JP78 : short # DBG_2V8A for SDHI1
* JP79 : NC # DBG_3V3A for SDHI1
* JP80 : NC # DBG_3V3A_SD for SDHI1
*
* [G4-CORE-BOARD]
* S32 : all off # to dissever from G3-CORE_DBG board
* S33 : all off # to dissever from G3-CORE_DBG board
*
* [G3-CORE_DBG-BOARD]
* S1 : all off # to dissever from G3-CORE_DBG board
* S3 : all off # to dissever from G3-CORE_DBG board
* S4 : all off # to dissever from G3-CORE_DBG board
*/
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "loader",
.offset = 0x00000000,
.size = 512 * 1024,
},
{
.name = "bootenv",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024,
},
{
.name = "kernel_ro",
.offset = MTDPART_OFS_APPEND,
.size = 8 * 1024 * 1024,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 8 * 1024 * 1024,
},
{
.name = "data",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data nor_flash_data = {
.width = 2,
.parts = nor_flash_partitions,
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
};
static struct resource nor_flash_resources[] = {
[0] = {
.start = 0x00000000,
.end = 0x08000000 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device nor_flash_device = {
.name = "physmap-flash",
.dev = {
.platform_data = &nor_flash_data,
},
.num_resources = ARRAY_SIZE(nor_flash_resources),
.resource = nor_flash_resources,
};
/* USBHS */
static void usb_host_port_power(int port, int power)
{
if (!power) /* only power-on supported for now */
return;
/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
__raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008));
}
static struct r8a66597_platdata usb_host_data = {
.on_chip = 1,
.port_power = usb_host_port_power,
};
static struct resource usb_host_resources[] = {
[0] = {
.name = "USBHS",
.start = 0xe6890000,
.end = 0xe68900e5,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x0a20), /* USBHS_USHI0 */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usb_host_device = {
.name = "r8a66597_hcd",
.id = 0,
.dev = {
.platform_data = &usb_host_data,
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(usb_host_resources),
.resource = usb_host_resources,
};
/* KEYSC */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_5,
.scan_timing = 3,
.delay = 100,
.keycodes = {
KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
},
};
static struct resource keysc_resources[] = {
[0] = {
.name = "KEYSC",
.start = 0xe61b0000,
.end = 0xe61b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x0be0), /* KEYSC_KEY */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device keysc_device = {
.name = "sh_keysc",
.id = 0, /* keysc0 clock */
.num_resources = ARRAY_SIZE(keysc_resources),
.resource = keysc_resources,
.dev = {
.platform_data = &keysc_info,
},
};
/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
};
/* SDHI */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SDIO_IRQ,
};
static struct resource sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
.start = 0xe6d50000,
.end = 0xe6d500ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x0e00), /* SDHI0 */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi0_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(sdhi0_resources),
.resource = sdhi0_resources,
.id = 0,
.dev = {
.platform_data = &sdhi0_info,
},
};
static struct sh_mobile_sdhi_info sdhi1_info = {
.tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
};
static struct resource sdhi1_resources[] = {
[0] = {
.name = "SDHI1",
.start = 0xe6d60000,
.end = 0xe6d600ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x0e80), /* SDHI1 */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi1_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(sdhi1_resources),
.resource = sdhi1_resources,
.id = 1,
.dev = {
.platform_data = &sdhi1_info,
},
};
static struct platform_device *g4evm_devices[] __initdata = {
&nor_flash_device,
&usb_host_device,
&keysc_device,
&sdhi0_device,
&sdhi1_device,
};
#define GPIO_SDHID0_D0 IOMEM(0xe60520fc)
#define GPIO_SDHID0_D1 IOMEM(0xe60520fd)
#define GPIO_SDHID0_D2 IOMEM(0xe60520fe)
#define GPIO_SDHID0_D3 IOMEM(0xe60520ff)
#define GPIO_SDHICMD0 IOMEM(0xe6052100)
#define GPIO_SDHID1_D0 IOMEM(0xe6052103)
#define GPIO_SDHID1_D1 IOMEM(0xe6052104)
#define GPIO_SDHID1_D2 IOMEM(0xe6052105)
#define GPIO_SDHID1_D3 IOMEM(0xe6052106)
#define GPIO_SDHICMD1 IOMEM(0xe6052107)
static void __init g4evm_init(void)
{
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
sh7377_pinmux_init();
/* Lit DS14 LED */
gpio_request(GPIO_PORT109, NULL);
gpio_direction_output(GPIO_PORT109, 1);
gpio_export(GPIO_PORT109, 1);
/* Lit DS15 LED */
gpio_request(GPIO_PORT110, NULL);
gpio_direction_output(GPIO_PORT110, 1);
gpio_export(GPIO_PORT110, 1);
/* Lit DS16 LED */
gpio_request(GPIO_PORT112, NULL);
gpio_direction_output(GPIO_PORT112, 1);
gpio_export(GPIO_PORT112, 1);
/* Lit DS17 LED */
gpio_request(GPIO_PORT113, NULL);
gpio_direction_output(GPIO_PORT113, 1);
gpio_export(GPIO_PORT113, 1);
/* USBHS */
gpio_request(GPIO_FN_VBUS_0, NULL);
gpio_request(GPIO_FN_PWEN, NULL);
gpio_request(GPIO_FN_OVCN, NULL);
gpio_request(GPIO_FN_OVCN2, NULL);
gpio_request(GPIO_FN_EXTLP, NULL);
gpio_request(GPIO_FN_IDIN, NULL);
/* setup USB phy */
__raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */
__raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */
__raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */
__raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */
/* KEYSC @ CN31 */
gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
/* SDHI0 */
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request_pullup(GPIO_SDHID0_D0);
gpio_request_pullup(GPIO_SDHID0_D1);
gpio_request_pullup(GPIO_SDHID0_D2);
gpio_request_pullup(GPIO_SDHID0_D3);
gpio_request_pullup(GPIO_SDHICMD0);
/* SDHI1 */
gpio_request(GPIO_FN_SDHICLK1, NULL);
gpio_request(GPIO_FN_SDHID1_0, NULL);
gpio_request(GPIO_FN_SDHID1_1, NULL);
gpio_request(GPIO_FN_SDHID1_2, NULL);
gpio_request(GPIO_FN_SDHID1_3, NULL);
gpio_request(GPIO_FN_SDHICMD1, NULL);
gpio_request_pullup(GPIO_SDHID1_D0);
gpio_request_pullup(GPIO_SDHID1_D1);
gpio_request_pullup(GPIO_SDHID1_D2);
gpio_request_pullup(GPIO_SDHID1_D3);
gpio_request_pullup(GPIO_SDHICMD1);
sh7377_add_standard_devices();
platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
}
MACHINE_START(G4EVM, "g4evm")
.map_io = sh7377_map_io,
.init_early = sh7377_add_early_devices,
.init_irq = sh7377_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = g4evm_init,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
MACHINE_END
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册