This patch adds sound support for NEC Versa S9100
With it, we get sound on the internal speaker and headphone (with
automute working) while there is no sound by default.
External mic also works fine but I don't know if there is an internal
one (if there is an internal mic it does not work currently), and I
had to send back the hardware.
Signed-off-by: NPascal Terjan <pterjan@mandriva.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

After the transition from cs4321_lib to wss_lib, azt2320 probe visits
snd_ad1848_probe during detection. It expects register 0 (LEFT_INPUT)
to be able to retain the value 0xaa during detection but AZT2320 does
not support MIC gain meaning it reads back as 0x8a instead.
Signed-off-by: NRene Herman <rene.herman@gmail.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add the Techmakers MF-4236PW (Crystal CX4236B-XQ3) PnP card ID.
Signed-off-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Remove initializations of spinlock and mutexes which
are done earlier in snd_wss_new(). The snd_wss_new()
is called from snd_wss_create().
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

snd-opti92x-ad1848 mistakingly passes WSS_HW_OPTI93X currently. This
fixes it as tested with a OPTi 82C929A/AD1848 card.
Signed-off-by: NRene Herman <rene.herman@gmail.com>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Limit opti93x cards capture formats to only linear ones.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.

This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.

I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)

Sound playback and recording works on all these cards.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the wss pcm code and kill the ad1848 pcm code.

The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the wss mixer code and kill the ad1848 mixer code.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use CS4231P instead of AD1848P (kill the AD1848P).
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use the wss macros instead of ad1848 ones.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.

Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Rename file include/sound/cs4231.h
into include/sound/wss.h
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added support for Terrasoniq/MUSONIK TS22 PCI card.
Signed-off-by: NMisha Zhilin <misha@epiphan.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.

Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)
Signed-off-by: NPawel Moll <pawel.moll@st.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a new US122L usb-audio driver.  This driver works together with a
dedicated alsa-lib plugin.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.

New, updated patch with same subject replaces this commit.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Updated IEC958 consumer status channel definitions according
to the third edition of IEC60958-3 spec.
Signed-off-by: NPawel Moll <pawel.moll@st.com>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.

Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.

Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.
Signed-off-by: NPawel MOLL <pawel.moll@st.com>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ASOC: convert use of uint to unsigned int
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Allow all the CODEC drivers to be built without a machine driver in order
to facilitate testing of subsystem-wide changes and gain better coverage
from automated testing efforts. This also helps things like the generic
OpenFirmware machine driver for PowerPC.

Currently AC97 CODECs are not included since the current setup relies
on having a controller driver available.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

[Mechanical updates from code review applied -- broonie]
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This fixes sparse warnings and allows non-OpenFirmware systems to attempt
to bind to the device.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ASoC Codec driver for the TLV320AIC26 device.  As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This is an I2S bus driver for the MPC5200 PSC device.  It depends on the
soc-of helper functions to match a PSC device with a codec based on data
in the device tree.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The OpenFirmware API headers don't build on all platforms so ensure
that they are not included unless they are being used.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Simple utility layer for creating ASoC machine instances based on data
in the OpenFirmware device tree.  OF aware platform drivers and codec
drivers register themselves with this framework and the framework
automatically instantiates a machine driver.  At the moment, the driver
is not very capable and it is expected to be extended as more features
are needed for specifying the configuration in the device tree.

This is most likely temporary glue code to work around limitations in
the ASoC v1 framework.  When v2 is merged, most of this driver will
need to be reworked.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Most of the ASoC controls refer to the maximum value that can be set for
a control as mask but there is no actual requirement for all bits to be
set at the highest possible value making the name mask misleading.
Change the code to use max instead.
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Convert bitfields in ASoC into full int width. This is a
simple mechanical conversion. Two places in the DAPM code
were fixed to properly use mask.
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Some codecs have unusual features in their register maps such as very
large registers representing arrays of coefficients. Support these
codecs in the register cache sysfs file by allowing them to provide a
function register_display() overriding the default output for register
contents.

Also ensure that we don't overflow PAGE_SIZE while writing out the
register dump.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use input_free_devce() correctly instead of kfree() at error path.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:

config SND_FOO
        tristate "..."
        ...
        select SND_JACK if INPUT=y || INPUT=SND

to ensure that the jack detection API is enabled if the input subsystem
is.  If the input subsystem is not enabled then a stub version of the
API is provided.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Currently very few systems provide information about jack status to user
space, even though many have hardware facilities to do detection. Those
systems that do use an input device with the existing SW_HEADPHONE_INSERT
switch type to do so, often independently of ALSA.

This patch introduces a standard method for representing jacks to user
space into ALSA. It allows drivers to register jacks for a sound card with
the input subsystem, binding the input device to the card to help user
space associate the input devices with their sound cards. The created
input devices are named in the form "card longname jack" where jack is
provided by the driver when allocating a jack. By default the parent for
the input device is the sound card but this can be overridden by the
card driver.

The existing user space API with SW_HEADPHONE_INSERT is preserved.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

There is a whitespace at the end of added line. Remove it.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than
one amp to power down.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>