提交 760fc6b8 编写于 作者: K Krzysztof Helt 提交者: Jaroslav Kysela

ALSA: wss_lib: use wss detection code instead of ad1848 one

Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.

This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.

I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)

Sound playback and recording works on all these cards.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: NRene Herman <rene.herman@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 ead893c0
#ifndef __SOUND_AD1848_H
#define __SOUND_AD1848_H
/*
* Copyright (c) by Jaroslav Kysela <perex@perex.cz>
* Definitions for AD1847/AD1848/CS4248 chips
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include "pcm.h"
#include <linux/interrupt.h>
#include "wss.h" /* temporary till the driver is removed */
/* codec registers */
#define AD1848_LEFT_INPUT 0x00 /* left input control */
#define AD1848_RIGHT_INPUT 0x01 /* right input control */
#define AD1848_AUX1_LEFT_INPUT 0x02 /* left AUX1 input control */
#define AD1848_AUX1_RIGHT_INPUT 0x03 /* right AUX1 input control */
#define AD1848_AUX2_LEFT_INPUT 0x04 /* left AUX2 input control */
#define AD1848_AUX2_RIGHT_INPUT 0x05 /* right AUX2 input control */
#define AD1848_LEFT_OUTPUT 0x06 /* left output control register */
#define AD1848_RIGHT_OUTPUT 0x07 /* right output control register */
#define AD1848_DATA_FORMAT 0x08 /* clock and data format - playback/capture - bits 7-0 MCE */
#define AD1848_IFACE_CTRL 0x09 /* interface control - bits 7-2 MCE */
#define AD1848_PIN_CTRL 0x0a /* pin control */
#define AD1848_TEST_INIT 0x0b /* test and initialization */
#define AD1848_MISC_INFO 0x0c /* miscellaneous information */
#define AD1848_LOOPBACK 0x0d /* loopback control */
#define AD1848_DATA_UPR_CNT 0x0e /* playback/capture upper base count */
#define AD1848_DATA_LWR_CNT 0x0f /* playback/capture lower base count */
/* definitions for codec register select port - CODECP( REGSEL ) */
#define AD1848_INIT 0x80 /* CODEC is initializing */
#define AD1848_MCE 0x40 /* mode change enable */
#define AD1848_TRD 0x20 /* transfer request disable */
/* definitions for codec status register - CODECP( STATUS ) */
#define AD1848_GLOBALIRQ 0x01 /* IRQ is active */
/* definitions for AD1848_LEFT_INPUT and AD1848_RIGHT_INPUT registers */
#define AD1848_ENABLE_MIC_GAIN 0x20
#define AD1848_MIXS_LINE1 0x00
#define AD1848_MIXS_AUX1 0x40
#define AD1848_MIXS_LINE2 0x80
#define AD1848_MIXS_ALL 0xc0
/* definitions for clock and data format register - AD1848_PLAYBK_FORMAT */
#define AD1848_LINEAR_8 0x00 /* 8-bit unsigned data */
#define AD1848_ALAW_8 0x60 /* 8-bit A-law companded */
#define AD1848_ULAW_8 0x20 /* 8-bit U-law companded */
#define AD1848_LINEAR_16 0x40 /* 16-bit twos complement data - little endian */
#define AD1848_STEREO 0x10 /* stereo mode */
/* bits 3-1 define frequency divisor */
#define AD1848_XTAL1 0x00 /* 24.576 crystal */
#define AD1848_XTAL2 0x01 /* 16.9344 crystal */
/* definitions for interface control register - AD1848_IFACE_CTRL */
#define AD1848_CAPTURE_PIO 0x80 /* capture PIO enable */
#define AD1848_PLAYBACK_PIO 0x40 /* playback PIO enable */
#define AD1848_CALIB_MODE 0x18 /* calibration mode bits */
#define AD1848_AUTOCALIB 0x08 /* auto calibrate */
#define AD1848_SINGLE_DMA 0x04 /* use single DMA channel */
#define AD1848_CAPTURE_ENABLE 0x02 /* capture enable */
#define AD1848_PLAYBACK_ENABLE 0x01 /* playback enable */
/* definitions for pin control register - AD1848_PIN_CTRL */
#define AD1848_IRQ_ENABLE 0x02 /* enable IRQ */
#define AD1848_XCTL1 0x40 /* external control #1 */
#define AD1848_XCTL0 0x80 /* external control #0 */
/* definitions for test and init register - AD1848_TEST_INIT */
#define AD1848_CALIB_IN_PROGRESS 0x20 /* auto calibrate in progress */
#define AD1848_DMA_REQUEST 0x10 /* DMA request in progress */
/* exported functions */
void snd_ad1848_out(struct snd_wss *chip, unsigned char reg,
unsigned char value);
int snd_ad1848_create(struct snd_card *card,
unsigned long port,
int irq, int dma,
unsigned short hardware,
struct snd_wss **chip);
#endif /* __SOUND_AD1848_H */
......@@ -4,11 +4,6 @@ config SND_WSS_LIB
tristate
select SND_PCM
config SND_AD1848_LIB
tristate
select SND_PCM
select SND_WSS_LIB
config SND_SB_COMMON
tristate
......@@ -56,7 +51,7 @@ config SND_AD1816A
config SND_AD1848
tristate "Generic AD1848/CS4248 driver"
select SND_AD1848_LIB
select SND_WSS_LIB
help
Say Y here to include support for AD1848 (Analog Devices) or
CS4248 (Cirrus Logic - Crystal Semiconductors) chips.
......@@ -97,7 +92,7 @@ config SND_AZT2320
config SND_CMI8330
tristate "C-Media CMI8330"
select SND_AD1848_LIB
select SND_WSS_LIB
select SND_SB16_DSP
help
Say Y here to include support for soundcards based on the
......@@ -193,7 +188,7 @@ config SND_ES18XX
config SND_SC6000
tristate "Gallant SC-6000, Audio Excel DSP 16"
depends on HAS_IOPORT
select SND_AD1848_LIB
select SND_WSS_LIB
select SND_OPL3_LIB
select SND_MPU401_UART
help
......@@ -280,7 +275,7 @@ config SND_OPTI92X_AD1848
select SND_OPL3_LIB
select SND_OPL4_LIB
select SND_MPU401_UART
select SND_AD1848_LIB
select SND_WSS_LIB
help
Say Y here to include support for soundcards based on Opti
82C92x or OTI-601 chips and using an AD1848 codec.
......@@ -373,7 +368,7 @@ config SND_SB16_CSP
config SND_SGALAXY
tristate "Aztech Sound Galaxy"
select SND_AD1848_LIB
select SND_WSS_LIB
help
Say Y here to include support for Aztech Sound Galaxy
soundcards.
......
......@@ -3,10 +3,8 @@
# Copyright (c) 2001 by Jaroslav Kysela <perex@perex.cz>
#
snd-ad1848-lib-objs := ad1848_lib.o
snd-ad1848-objs := ad1848.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AD1848) += snd-ad1848.o
obj-$(CONFIG_SND_AD1848_LIB) += snd-ad1848-lib.o
......@@ -28,7 +28,7 @@
#include <linux/wait.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/ad1848.h>
#include <sound/wss.h>
#include <sound/initval.h>
#define CRD_NAME "Generic AD1848/AD1847/CS4248"
......@@ -95,8 +95,9 @@ static int __devinit snd_ad1848_probe(struct device *dev, unsigned int n)
if (!card)
return -EINVAL;
error = snd_ad1848_create(card, port[n], irq[n], dma1[n],
thinkpad[n] ? WSS_HW_THINKPAD : WSS_HW_DETECT, &chip);
error = snd_wss_create(card, port[n], -1, irq[n], dma1[n], -1,
thinkpad[n] ? WSS_HW_THINKPAD : WSS_HW_DETECT,
0, &chip);
if (error < 0)
goto out;
......
/*
* Copyright (c) by Jaroslav Kysela <perex@perex.cz>
* Routines for control of AD1848/AD1847/CS4248
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#define SNDRV_MAIN_OBJECT_FILE
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <sound/core.h>
#include <sound/ad1848.h>
#include <sound/control.h>
#include <sound/tlv.h>
#include <sound/pcm_params.h>
#include <asm/io.h>
#include <asm/dma.h>
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
MODULE_DESCRIPTION("Routines for control of AD1848/AD1847/CS4248");
MODULE_LICENSE("GPL");
#if 0
#define SNDRV_DEBUG_MCE
#endif
/*
* Some variables
*/
static unsigned char snd_ad1848_original_image[16] =
{
0x00, /* 00 - lic */
0x00, /* 01 - ric */
0x9f, /* 02 - la1ic */
0x9f, /* 03 - ra1ic */
0x9f, /* 04 - la2ic */
0x9f, /* 05 - ra2ic */
0xbf, /* 06 - loc */
0xbf, /* 07 - roc */
0x20, /* 08 - dfr */
AD1848_AUTOCALIB, /* 09 - ic */
0x00, /* 0a - pc */
0x00, /* 0b - ti */
0x00, /* 0c - mi */
0x00, /* 0d - lbc */
0x00, /* 0e - dru */
0x00, /* 0f - drl */
};
/*
* Basic I/O functions
*/
static void snd_ad1848_wait(struct snd_wss *chip)
{
int timeout;
for (timeout = 250; timeout > 0; timeout--) {
if ((inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) == 0)
break;
udelay(100);
}
}
void snd_ad1848_out(struct snd_wss *chip,
unsigned char reg,
unsigned char value)
{
snd_ad1848_wait(chip);
#ifdef CONFIG_SND_DEBUG
if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
snd_printk(KERN_WARNING "auto calibration time out - "
"reg = 0x%x, value = 0x%x\n", reg, value);
#endif
outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL));
outb(chip->image[reg] = value, chip->port + CS4231P(REG));
mb();
snd_printdd("codec out - reg 0x%x = 0x%x\n",
chip->mce_bit | reg, value);
}
EXPORT_SYMBOL(snd_ad1848_out);
static unsigned char snd_ad1848_in(struct snd_wss *chip, unsigned char reg)
{
snd_ad1848_wait(chip);
#ifdef CONFIG_SND_DEBUG
if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
snd_printk(KERN_WARNING "auto calibration time out - "
"reg = 0x%x\n", reg);
#endif
outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL));
mb();
return inb(chip->port + CS4231P(REG));
}
#if 0
static void snd_ad1848_debug(struct snd_wss *chip)
{
printk(KERN_DEBUG "AD1848 REGS: INDEX = 0x%02x ", inb(chip->port + CS4231P(REGSEL)));
printk(KERN_DEBUG " STATUS = 0x%02x\n", inb(chip->port + CS4231P(STATUS)));
printk(KERN_DEBUG " 0x00: left input = 0x%02x ", snd_ad1848_in(chip, 0x00));
printk(KERN_DEBUG " 0x08: playback format = 0x%02x\n", snd_ad1848_in(chip, 0x08));
printk(KERN_DEBUG " 0x01: right input = 0x%02x ", snd_ad1848_in(chip, 0x01));
printk(KERN_DEBUG " 0x09: iface (CFIG 1) = 0x%02x\n", snd_ad1848_in(chip, 0x09));
printk(KERN_DEBUG " 0x02: AUXA left = 0x%02x ", snd_ad1848_in(chip, 0x02));
printk(KERN_DEBUG " 0x0a: pin control = 0x%02x\n", snd_ad1848_in(chip, 0x0a));
printk(KERN_DEBUG " 0x03: AUXA right = 0x%02x ", snd_ad1848_in(chip, 0x03));
printk(KERN_DEBUG " 0x0b: init & status = 0x%02x\n", snd_ad1848_in(chip, 0x0b));
printk(KERN_DEBUG " 0x04: AUXB left = 0x%02x ", snd_ad1848_in(chip, 0x04));
printk(KERN_DEBUG " 0x0c: revision & mode = 0x%02x\n", snd_ad1848_in(chip, 0x0c));
printk(KERN_DEBUG " 0x05: AUXB right = 0x%02x ", snd_ad1848_in(chip, 0x05));
printk(KERN_DEBUG " 0x0d: loopback = 0x%02x\n", snd_ad1848_in(chip, 0x0d));
printk(KERN_DEBUG " 0x06: left output = 0x%02x ", snd_ad1848_in(chip, 0x06));
printk(KERN_DEBUG " 0x0e: data upr count = 0x%02x\n", snd_ad1848_in(chip, 0x0e));
printk(KERN_DEBUG " 0x07: right output = 0x%02x ", snd_ad1848_in(chip, 0x07));
printk(KERN_DEBUG " 0x0f: data lwr count = 0x%02x\n", snd_ad1848_in(chip, 0x0f));
}
#endif
/*
* AD1848 detection / MCE routines
*/
static void snd_ad1848_mce_up(struct snd_wss *chip)
{
unsigned long flags;
int timeout;
snd_ad1848_wait(chip);
#ifdef CONFIG_SND_DEBUG
if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
snd_printk(KERN_WARNING "mce_up - auto calibration time out (0)\n");
#endif
spin_lock_irqsave(&chip->reg_lock, flags);
chip->mce_bit |= AD1848_MCE;
timeout = inb(chip->port + CS4231P(REGSEL));
if (timeout == 0x80)
snd_printk(KERN_WARNING "mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port);
if (!(timeout & AD1848_MCE))
outb(chip->mce_bit | (timeout & 0x1f),
chip->port + CS4231P(REGSEL));
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
static void snd_ad1848_mce_down(struct snd_wss *chip)
{
unsigned long flags, timeout;
int reg;
spin_lock_irqsave(&chip->reg_lock, flags);
for (timeout = 5; timeout > 0; timeout--)
inb(chip->port + CS4231P(REGSEL));
/* end of cleanup sequence */
for (timeout = 12000;
timeout > 0 && (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT);
timeout--)
udelay(100);
snd_printdd("(1) timeout = %ld\n", timeout);
#ifdef CONFIG_SND_DEBUG
if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
snd_printk(KERN_WARNING
"mce_down [0x%lx] - auto calibration time out (0)\n",
chip->port + CS4231P(REGSEL));
#endif
chip->mce_bit &= ~AD1848_MCE;
reg = inb(chip->port + CS4231P(REGSEL));
outb(chip->mce_bit | (reg & 0x1f), chip->port + CS4231P(REGSEL));
if (reg == 0x80)
snd_printk(KERN_WARNING "mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port);
if ((reg & AD1848_MCE) == 0) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
return;
}
/*
* Wait for auto-calibration (AC) process to finish, i.e. ACI to go low.
* It may take up to 5 sample periods (at most 907 us @ 5.5125 kHz) for
* the process to _start_, so it is important to wait at least that long
* before checking. Otherwise we might think AC has finished when it
* has in fact not begun. It could take 128 (no AC) or 384 (AC) cycles
* for ACI to drop. This gives a wait of at most 70 ms with a more
* typical value of 3-9 ms.
*/
timeout = jiffies + msecs_to_jiffies(250);
do {
spin_unlock_irqrestore(&chip->reg_lock, flags);
msleep(1);
spin_lock_irqsave(&chip->reg_lock, flags);
reg = snd_ad1848_in(chip, AD1848_TEST_INIT) &
AD1848_CALIB_IN_PROGRESS;
} while (reg && time_before(jiffies, timeout));
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (reg)
snd_printk(KERN_ERR
"mce_down - auto calibration time out (2)\n");
snd_printdd("(4) jiffies = %lu\n", jiffies);
snd_printd("mce_down - exit = 0x%x\n",
inb(chip->port + CS4231P(REGSEL)));
}
static irqreturn_t snd_ad1848_interrupt(int irq, void *dev_id)
{
struct snd_wss *chip = dev_id;
if ((chip->mode & WSS_MODE_PLAY) && chip->playback_substream)
snd_pcm_period_elapsed(chip->playback_substream);
if ((chip->mode & WSS_MODE_RECORD) && chip->capture_substream)
snd_pcm_period_elapsed(chip->capture_substream);
outb(0, chip->port + CS4231P(STATUS)); /* clear global interrupt bit */
return IRQ_HANDLED;
}
/*
*/
static void snd_ad1848_thinkpad_twiddle(struct snd_wss *chip, int on)
{
int tmp;
if (!chip->thinkpad_flag) return;
outb(0x1c, AD1848_THINKPAD_CTL_PORT1);
tmp = inb(AD1848_THINKPAD_CTL_PORT2);
if (on)
/* turn it on */
tmp |= AD1848_THINKPAD_CS4248_ENABLE_BIT;
else
/* turn it off */
tmp &= ~AD1848_THINKPAD_CS4248_ENABLE_BIT;
outb(tmp, AD1848_THINKPAD_CTL_PORT2);
}
#ifdef CONFIG_PM
static void snd_ad1848_suspend(struct snd_wss *chip)
{
snd_pcm_suspend_all(chip->pcm);
if (chip->thinkpad_flag)
snd_ad1848_thinkpad_twiddle(chip, 0);
}
static void snd_ad1848_resume(struct snd_wss *chip)
{
int i;
if (chip->thinkpad_flag)
snd_ad1848_thinkpad_twiddle(chip, 1);
/* clear any pendings IRQ */
inb(chip->port + CS4231P(STATUS));
outb(0, chip->port + CS4231P(STATUS));
mb();
snd_ad1848_mce_down(chip);
for (i = 0; i < 16; i++)
snd_ad1848_out(chip, i, chip->image[i]);
snd_ad1848_mce_up(chip);
snd_ad1848_mce_down(chip);
}
#endif /* CONFIG_PM */
static int snd_ad1848_probe(struct snd_wss *chip)
{
unsigned long flags;
int i, id, rev, ad1847;
unsigned char *ptr;
#if 0
snd_ad1848_debug(chip);
#endif
id = ad1847 = 0;
for (i = 0; i < 1000; i++) {
mb();
if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
udelay(500);
else {
spin_lock_irqsave(&chip->reg_lock, flags);
snd_ad1848_out(chip, AD1848_MISC_INFO, 0x00);
snd_ad1848_out(chip, AD1848_LEFT_INPUT, 0xaa);
snd_ad1848_out(chip, AD1848_RIGHT_INPUT, 0x45);
rev = snd_ad1848_in(chip, AD1848_RIGHT_INPUT);
if (rev == 0x65) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
id = 1;
ad1847 = 1;
break;
}
if (snd_ad1848_in(chip, AD1848_LEFT_INPUT) == 0xaa && rev == 0x45) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
id = 1;
break;
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
}
if (id != 1)
return -ENODEV; /* no valid device found */
if (chip->hardware == WSS_HW_DETECT) {
if (ad1847) {
chip->hardware = WSS_HW_AD1847;
} else {
chip->hardware = WSS_HW_AD1848;
rev = snd_ad1848_in(chip, AD1848_MISC_INFO);
if (rev & 0x80) {
chip->hardware = WSS_HW_CS4248;
} else if ((rev & 0x0f) == 0x0a) {
snd_ad1848_out(chip, AD1848_MISC_INFO, 0x40);
for (i = 0; i < 16; ++i) {
if (snd_ad1848_in(chip, i) != snd_ad1848_in(chip, i + 16)) {
chip->hardware = WSS_HW_CMI8330;
break;
}
}
snd_ad1848_out(chip, AD1848_MISC_INFO, 0x00);
}
}
}
spin_lock_irqsave(&chip->reg_lock, flags);
inb(chip->port + CS4231P(STATUS)); /* clear any pendings IRQ */
outb(0, chip->port + CS4231P(STATUS));
mb();
spin_unlock_irqrestore(&chip->reg_lock, flags);
chip->image[AD1848_MISC_INFO] = 0x00;
chip->image[AD1848_IFACE_CTRL] =
(chip->image[AD1848_IFACE_CTRL] & ~AD1848_SINGLE_DMA) | AD1848_SINGLE_DMA;
ptr = (unsigned char *) &chip->image;
snd_ad1848_mce_down(chip);
spin_lock_irqsave(&chip->reg_lock, flags);
for (i = 0; i < 16; i++) /* ok.. fill all AD1848 registers */
snd_ad1848_out(chip, i, *ptr++);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_ad1848_mce_up(chip);
/* init needed for WSS pcm */
spin_lock_irqsave(&chip->reg_lock, flags);
chip->image[AD1848_IFACE_CTRL] &= ~(AD1848_PLAYBACK_ENABLE |
AD1848_PLAYBACK_PIO |
AD1848_CAPTURE_ENABLE |
AD1848_CAPTURE_PIO |
AD1848_CALIB_MODE);
chip->image[AD1848_IFACE_CTRL] |= AD1848_AUTOCALIB;
snd_ad1848_out(chip, AD1848_IFACE_CTRL, chip->image[AD1848_IFACE_CTRL]);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_ad1848_mce_down(chip);
return 0; /* all things are ok.. */
}
/*
*/
static int snd_ad1848_free(struct snd_wss *chip)
{
release_and_free_resource(chip->res_port);
if (chip->irq >= 0)
free_irq(chip->irq, (void *) chip);
if (chip->dma1 >= 0) {
snd_dma_disable(chip->dma1);
free_dma(chip->dma1);
}
kfree(chip);
return 0;
}
static int snd_ad1848_dev_free(struct snd_device *device)
{
struct snd_wss *chip = device->device_data;
return snd_ad1848_free(chip);
}
int snd_ad1848_create(struct snd_card *card,
unsigned long port,
int irq, int dma,
unsigned short hardware,
struct snd_wss **rchip)
{
static struct snd_device_ops ops = {
.dev_free = snd_ad1848_dev_free,
};
struct snd_wss *chip;
int err;
*rchip = NULL;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
spin_lock_init(&chip->reg_lock);
chip->card = card;
chip->port = port;
chip->irq = -1;
chip->dma1 = -1;
chip->dma2 = -1;
chip->single_dma = 1;
chip->hardware = hardware;
memcpy(&chip->image, &snd_ad1848_original_image, sizeof(snd_ad1848_original_image));
if ((chip->res_port = request_region(port, 4, "AD1848")) == NULL) {
snd_printk(KERN_ERR "ad1848: can't grab port 0x%lx\n", port);
snd_ad1848_free(chip);
return -EBUSY;
}
if (request_irq(irq, snd_ad1848_interrupt, IRQF_DISABLED, "AD1848", (void *) chip)) {
snd_printk(KERN_ERR "ad1848: can't grab IRQ %d\n", irq);
snd_ad1848_free(chip);
return -EBUSY;
}
chip->irq = irq;
if (request_dma(dma, "AD1848")) {
snd_printk(KERN_ERR "ad1848: can't grab DMA %d\n", dma);
snd_ad1848_free(chip);
return -EBUSY;
}
chip->dma1 = dma;
chip->dma2 = dma;
if (hardware == WSS_HW_THINKPAD) {
chip->thinkpad_flag = 1;
chip->hardware = WSS_HW_DETECT; /* reset */
snd_ad1848_thinkpad_twiddle(chip, 1);
}
if (snd_ad1848_probe(chip) < 0) {
snd_ad1848_free(chip);
return -ENODEV;
}
/* Register device */
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
snd_ad1848_free(chip);
return err;
}
#ifdef CONFIG_PM
chip->suspend = snd_ad1848_suspend;
chip->resume = snd_ad1848_resume;
#endif
*rchip = chip;
return 0;
}
EXPORT_SYMBOL(snd_ad1848_create);
/*
* INIT part
*/
static int __init alsa_ad1848_init(void)
{
return 0;
}
static void __exit alsa_ad1848_exit(void)
{
}
module_init(alsa_ad1848_init)
module_exit(alsa_ad1848_exit)
......@@ -50,7 +50,7 @@
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/ad1848.h>
#include <sound/wss.h>
#include <sound/sb.h>
#include <sound/initval.h>
......@@ -180,9 +180,9 @@ WSS_DOUBLE("Master Playback Volume", 0,
WSS_SINGLE("Loud Playback Switch", 0,
CMI8330_MUTEMUX, 6, 1, 1),
WSS_DOUBLE("PCM Playback Switch", 0,
AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 7, 7, 1, 1),
CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
WSS_DOUBLE("PCM Playback Volume", 0,
AD1848_LEFT_OUTPUT, AD1848_RIGHT_OUTPUT, 0, 0, 63, 1),
CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1),
WSS_DOUBLE("Line Playback Switch", 0,
CMI8330_MUTEMUX, CMI8330_MUTEMUX, 4, 3, 1, 0),
WSS_DOUBLE("Line Playback Volume", 0,
......@@ -489,12 +489,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
int i, err;
acard = card->private_data;
if ((err = snd_ad1848_create(card,
wssport[dev] + 4,
wssirq[dev],
wssdma[dev],
WSS_HW_DETECT,
&acard->wss)) < 0) {
err = snd_wss_create(card, wssport[dev] + 4, -1,
wssirq[dev],
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
snd_printk(KERN_ERR PFX "(AD1848) device busy??\n");
return err;
}
......@@ -517,9 +516,10 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
return err;
}
snd_ad1848_out(acard->wss, AD1848_MISC_INFO, 0x40); /* switch on MODE2 */
snd_wss_out(acard->wss, CS4231_MISC_INFO, 0x40); /* switch on MODE2 */
for (i = CMI8330_RMUX3D; i <= CMI8330_CDINGAIN; i++)
snd_ad1848_out(acard->wss, i, snd_cmi8330_image[i - CMI8330_RMUX3D]);
snd_wss_out(acard->wss, i,
snd_cmi8330_image[i - CMI8330_RMUX3D]);
if ((err = snd_cmi8330_mixer(card, acard)) < 0) {
snd_printk(KERN_ERR PFX "failed to create mixers\n");
......
......@@ -33,11 +33,7 @@
#include <asm/io.h>
#include <asm/dma.h>
#include <sound/core.h>
#if defined(CS4231) || defined(OPTi93X)
#include <sound/wss.h>
#else
#include <sound/ad1848.h>
#endif /* CS4231 */
#include <sound/mpu401.h>
#include <sound/opl3.h>
#ifndef OPTi93X
......@@ -148,9 +144,7 @@ struct snd_opti9xx {
long wss_base;
int irq;
int dma1;
#if defined(CS4231) || defined(OPTi93X)
int dma2;
#endif /* CS4231 || OPTi93X */
long fm_port;
......@@ -225,9 +219,7 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
chip->wss_base = -1;
chip->irq = -1;
chip->dma1 = -1;
#if defined(CS4231) || defined (OPTi93X)
chip->dma2 = -1;
#endif /* CS4231 || OPTi93X */
chip->fm_port = -1;
chip->mpu_port = -1;
chip->mpu_irq = -1;
......@@ -740,7 +732,6 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
if (error)
return error;
#if defined(CS4231) || defined(OPTi93X)
error = snd_wss_create(card, chip->wss_base + 4, -1,
chip->irq, chip->dma1, chip->dma2,
#ifdef CS4231
......@@ -753,12 +744,6 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
return error;
#ifdef OPTi93X
chip->codec = codec;
#endif
#else
error = snd_ad1848_create(card, chip->wss_base + 4, chip->irq,
chip->dma1, WSS_HW_DETECT, &codec);
if (error < 0)
return error;
#endif
error = snd_wss_pcm(codec, 0, &pcm);
if (error < 0)
......
......@@ -29,7 +29,7 @@
#include <linux/io.h>
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/ad1848.h>
#include <sound/wss.h>
#include <sound/opl3.h>
#include <sound/mpu401.h>
#include <sound/control.h>
......@@ -548,8 +548,8 @@ static int __devinit snd_sc6000_probe(struct device *devptr, unsigned int dev)
if (err < 0)
goto err_unmap2;
err = snd_ad1848_create(card, mss_port[dev] + 4, xirq, xdma,
WSS_HW_DETECT, &chip);
err = snd_wss_create(card, mss_port[dev] + 4, -1, xirq, xdma, -1,
WSS_HW_DETECT, 0, &chip);
if (err < 0)
goto err_unmap2;
card->private_data = chip;
......
......@@ -31,7 +31,7 @@
#include <asm/dma.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <sound/ad1848.h>
#include <sound/wss.h>
#include <sound/control.h>
#define SNDRV_LEGACY_FIND_FREE_IRQ
#define SNDRV_LEGACY_FIND_FREE_DMA
......@@ -267,9 +267,10 @@ static int __devinit snd_sgalaxy_probe(struct device *devptr, unsigned int dev)
if ((err = snd_sgalaxy_detect(dev, xirq, xdma1)) < 0)
goto _err;
if ((err = snd_ad1848_create(card, wssport[dev] + 4,
xirq, xdma1,
WSS_HW_DETECT, &chip)) < 0)
err = snd_wss_create(card, wssport[dev] + 4, -1,
xirq, xdma1, -1,
WSS_HW_DETECT, 0, &chip);
if (err < 0)
goto _err;
card->private_data = chip;
......@@ -331,8 +332,8 @@ static int snd_sgalaxy_resume(struct device *pdev, unsigned int n)
struct snd_wss *chip = card->private_data;
chip->resume(chip);
snd_ad1848_out(chip, SGALAXY_AUXC_LEFT, chip->image[SGALAXY_AUXC_LEFT]);
snd_ad1848_out(chip, SGALAXY_AUXC_RIGHT, chip->image[SGALAXY_AUXC_RIGHT]);
snd_wss_out(chip, SGALAXY_AUXC_LEFT, chip->image[SGALAXY_AUXC_LEFT]);
snd_wss_out(chip, SGALAXY_AUXC_RIGHT, chip->image[SGALAXY_AUXC_RIGHT]);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
......
......@@ -1073,7 +1073,11 @@ irqreturn_t snd_wss_interrupt(int irq, void *dev_id)
struct snd_wss *chip = dev_id;
unsigned char status;
status = snd_wss_in(chip, CS4231_IRQ_STATUS);
if (chip->hardware & WSS_HW_AD1848_MASK)
/* pretend it was the only possible irq for AD1848 */
status = CS4231_PLAYBACK_IRQ;
else
status = snd_wss_in(chip, CS4231_IRQ_STATUS);
if (status & CS4231_TIMER_IRQ) {
if (chip->timer)
snd_timer_interrupt(chip->timer, chip->timer->sticks);
......@@ -1105,7 +1109,11 @@ irqreturn_t snd_wss_interrupt(int irq, void *dev_id)
}
spin_lock(&chip->reg_lock);
snd_wss_outm(chip, CS4231_IRQ_STATUS, ~CS4231_ALL_IRQS | ~status, 0);
status = ~CS4231_ALL_IRQS | ~status;
if (chip->hardware & WSS_HW_AD1848_MASK)
wss_outb(chip, CS4231P(STATUS), 0);
else
snd_wss_outm(chip, CS4231_IRQ_STATUS, status, 0);
spin_unlock(&chip->reg_lock);
return IRQ_HANDLED;
}
......@@ -1137,36 +1145,112 @@ static snd_pcm_uframes_t snd_wss_capture_pointer(struct snd_pcm_substream *subst
*/
static int snd_wss_probe(struct snd_wss *chip)
static int snd_ad1848_probe(struct snd_wss *chip)
{
unsigned long flags;
int i, id, rev;
unsigned char *ptr;
unsigned int hw;
int i, id, rev, ad1847;
#if 0
snd_wss_debug(chip);
#endif
id = 0;
for (i = 0; i < 50; i++) {
ad1847 = 0;
for (i = 0; i < 1000; i++) {
mb();
if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
udelay(2000);
if (inb(chip->port + CS4231P(REGSEL)) & CS4231_INIT)
msleep(1);
else {
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_out(chip, CS4231_MISC_INFO, CS4231_MODE2);
id = snd_wss_in(chip, CS4231_MISC_INFO) & 0x0f;
snd_wss_out(chip, CS4231_MISC_INFO, 0x00);
snd_wss_out(chip, CS4231_LEFT_INPUT, 0xaa);
snd_wss_out(chip, CS4231_RIGHT_INPUT, 0x45);
rev = snd_wss_in(chip, CS4231_RIGHT_INPUT);
if (rev == 0x65) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
id = 1;
ad1847 = 1;
break;
}
if (snd_wss_in(chip, CS4231_LEFT_INPUT) == 0xaa &&
rev == 0x45) {
spin_unlock_irqrestore(&chip->reg_lock, flags);
id = 1;
break;
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (id == 0x0a)
break; /* this is valid value */
}
}
snd_printdd("wss: port = 0x%lx, id = 0x%x\n", chip->port, id);
if (id != 0x0a)
if (id != 1)
return -ENODEV; /* no valid device found */
id = 0;
if (chip->hardware == WSS_HW_DETECT)
id = ad1847 ? WSS_HW_AD1847 : WSS_HW_AD1848;
spin_lock_irqsave(&chip->reg_lock, flags);
inb(chip->port + CS4231P(STATUS)); /* clear any pendings IRQ */
outb(0, chip->port + CS4231P(STATUS));
mb();
if (id == WSS_HW_AD1848) {
/* check if there are more than 16 registers */
rev = snd_wss_in(chip, CS4231_MISC_INFO);
snd_wss_out(chip, CS4231_MISC_INFO, 0x40);
for (i = 0; i < 16; ++i) {
if (snd_wss_in(chip, i) != snd_wss_in(chip, i + 16)) {
id = WSS_HW_CMI8330;
break;
}
}
snd_wss_out(chip, CS4231_MISC_INFO, 0x00);
if (id != WSS_HW_CMI8330 && (rev & 0x80))
id = WSS_HW_CS4248;
if (id == WSS_HW_CMI8330 && (rev & 0x0f) != 0x0a)
id = 0;
}
if (id == WSS_HW_CMI8330) {
/* verify it is not CS4231 by changing the version register */
/* on CMI8330 it is volume control register and can be set 0 */
snd_wss_out(chip, CS4231_MISC_INFO, CS4231_MODE2);
snd_wss_dout(chip, CS4231_VERSION, 0x00);
rev = snd_wss_in(chip, CS4231_VERSION) & 0xe7;
if (rev)
id = 0;
snd_wss_out(chip, CS4231_MISC_INFO, 0);
}
if (id)
chip->hardware = id;
spin_unlock_irqrestore(&chip->reg_lock, flags);
return 0; /* all things are ok.. */
}
static int snd_wss_probe(struct snd_wss *chip)
{
unsigned long flags;
int i, id, rev, regnum;
unsigned char *ptr;
unsigned int hw;
id = snd_ad1848_probe(chip);
if (id < 0)
return id;
hw = chip->hardware;
if ((hw & WSS_HW_TYPE_MASK) == WSS_HW_DETECT) {
for (i = 0; i < 50; i++) {
mb();
if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
msleep(2);
else {
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_out(chip, CS4231_MISC_INFO,
CS4231_MODE2);
id = snd_wss_in(chip, CS4231_MISC_INFO) & 0x0f;
spin_unlock_irqrestore(&chip->reg_lock, flags);
if (id == 0x0a)
break; /* this is valid value */
}
}
snd_printdd("wss: port = 0x%lx, id = 0x%x\n", chip->port, id);
if (id != 0x0a)
return -ENODEV; /* no valid device found */
rev = snd_wss_in(chip, CS4231_VERSION) & 0xe7;
snd_printdd("CS4231: VERSION (I25) = 0x%x\n", rev);
if (rev == 0x80) {
......@@ -1197,7 +1281,8 @@ static int snd_wss_probe(struct snd_wss *chip)
mb();
spin_unlock_irqrestore(&chip->reg_lock, flags);
chip->image[CS4231_MISC_INFO] = CS4231_MODE2;
if (!(chip->hardware & WSS_HW_AD1848_MASK))
chip->image[CS4231_MISC_INFO] = CS4231_MODE2;
switch (chip->hardware) {
case WSS_HW_INTERWAVE:
chip->image[CS4231_MISC_INFO] = CS4231_IW_MODE3;
......@@ -1223,9 +1308,10 @@ static int snd_wss_probe(struct snd_wss *chip)
chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01;
}
ptr = (unsigned char *) &chip->image;
regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32;
snd_wss_mce_down(chip);
spin_lock_irqsave(&chip->reg_lock, flags);
for (i = 0; i < 32; i++) /* ok.. fill all CS4231 registers */
for (i = 0; i < regnum; i++) /* ok.. fill all registers */
snd_wss_out(chip, i, *ptr++);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_wss_mce_up(chip);
......@@ -1635,6 +1721,10 @@ static int snd_wss_new(struct snd_card *card,
else
memcpy(&chip->image, &snd_wss_original_image,
sizeof(snd_wss_original_image));
if (chip->hardware & WSS_HW_AD1848_MASK) {
chip->image[CS4231_PIN_CTRL] = 0;
chip->image[CS4231_TEST_INIT] = 0;
}
*rchip = chip;
return 0;
......@@ -1662,7 +1752,7 @@ int snd_wss_create(struct snd_card *card,
chip->dma1 = -1;
chip->dma2 = -1;
chip->res_port = request_region(port, 4, "CS4231");
chip->res_port = request_region(port, 4, "WSS");
if (!chip->res_port) {
snd_printk(KERN_ERR "wss: can't grab port 0x%lx\n", port);
snd_wss_free(chip);
......@@ -1681,20 +1771,20 @@ int snd_wss_create(struct snd_card *card,
chip->cport = cport;
if (!(hwshare & WSS_HWSHARE_IRQ))
if (request_irq(irq, snd_wss_interrupt, IRQF_DISABLED,
"CS4231", (void *) chip)) {
"WSS", (void *) chip)) {
snd_printk(KERN_ERR "wss: can't grab IRQ %d\n", irq);
snd_wss_free(chip);
return -EBUSY;
}
chip->irq = irq;
if (!(hwshare & WSS_HWSHARE_DMA1) && request_dma(dma1, "CS4231 - 1")) {
if (!(hwshare & WSS_HWSHARE_DMA1) && request_dma(dma1, "WSS - 1")) {
snd_printk(KERN_ERR "wss: can't grab DMA1 %d\n", dma1);
snd_wss_free(chip);
return -EBUSY;
}
chip->dma1 = dma1;
if (!(hwshare & WSS_HWSHARE_DMA2) && dma1 != dma2 &&
dma2 >= 0 && request_dma(dma2, "CS4231 - 2")) {
dma2 >= 0 && request_dma(dma2, "WSS - 2")) {
snd_printk(KERN_ERR "wss: can't grab DMA2 %d\n", dma2);
snd_wss_free(chip);
return -EBUSY;
......@@ -1705,6 +1795,12 @@ int snd_wss_create(struct snd_card *card,
} else
chip->dma2 = dma2;
if (hardware == WSS_HW_THINKPAD) {
chip->thinkpad_flag = 1;
chip->hardware = WSS_HW_DETECT; /* reset */
snd_wss_thinkpad_twiddle(chip, 1);
}
/* global setup */
if (snd_wss_probe(chip) < 0) {
snd_wss_free(chip);
......@@ -1775,12 +1871,6 @@ int snd_wss_pcm(struct snd_wss *chip, int device, struct snd_pcm **rpcm)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_wss_playback_ops);
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_wss_capture_ops);
/* temporary */
if (chip->hardware & WSS_HW_AD1848_MASK) {
chip->rate_constraint = snd_wss_xrate;
chip->set_playback_format = snd_wss_playback_format;
chip->set_capture_format = snd_wss_capture_format;
}
/* global setup */
pcm->private_data = chip;
pcm->info_flags = 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册