提交 d0513fc6 编写于 作者: M Matthew Ranostay 提交者: Jaroslav Kysela

ALSA: hda: added 92HD81/83 support

Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than
one amp to power down.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 b38addb2
......@@ -121,6 +121,7 @@ enum {
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 0x71d
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 0x71e
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 0x71f
#define AC_VERB_SET_EAPD 0x788
#define AC_VERB_SET_CODEC_RESET 0x7ff
/*
......
......@@ -71,6 +71,11 @@ enum {
STAC_92HD73XX_MODELS
};
enum {
STAC_92HD83XXX_REF,
STAC_92HD83XXX_MODELS
};
enum {
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
......@@ -145,6 +150,7 @@ struct sigmatel_spec {
/* power management */
unsigned int num_pwrs;
unsigned int *pwr_mapping;
hda_nid_t *pwr_nids;
hda_nid_t *dac_list;
......@@ -240,6 +246,33 @@ static hda_nid_t stac92hd73xx_dmux_nids[2] = {
0x20, 0x21,
};
#define STAC92HD83XXX_NUM_DMICS 2
static hda_nid_t stac92hd83xxx_dmic_nids[STAC92HD83XXX_NUM_DMICS + 1] = {
0x11, 0x12, 0
};
#define STAC92HD81_DAC_COUNT 2
#define STAC92HD83_DAC_COUNT 3
static hda_nid_t stac92hd83xxx_dac_nids[STAC92HD73_DAC_COUNT] = {
0x13, 0x14, 0x22,
};
static hda_nid_t stac92hd83xxx_dmux_nids[2] = {
0x17, 0x18,
};
static hda_nid_t stac92hd83xxx_adc_nids[2] = {
0x15, 0x16,
};
static hda_nid_t stac92hd83xxx_pwr_nids[4] = {
0xa, 0xb, 0xd, 0xe,
};
static unsigned int stac92hd83xxx_pwr_mapping[4] = {
0x03, 0x0c, 0x10, 0x40,
};
static hda_nid_t stac92hd71bxx_pwr_nids[3] = {
0x0a, 0x0d, 0x0f
};
......@@ -353,6 +386,11 @@ static hda_nid_t stac92hd73xx_pin_nids[13] = {
0x14, 0x1e, 0x22
};
static hda_nid_t stac92hd83xxx_pin_nids[14] = {
0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
0x0f, 0x10, 0x11, 0x12, 0x13,
0x1d, 0x1e, 0x1f, 0x20
};
static hda_nid_t stac92hd71bxx_pin_nids[10] = {
0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
0x0f, 0x14, 0x18, 0x19, 0x1e,
......@@ -631,6 +669,19 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = {
{}
};
static struct hda_verb stac92hd83xxx_core_init[] = {
/* start of config #1 */
{ 0xe, AC_VERB_SET_CONNECT_SEL, 0x3},
/* start of config #2 */
{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x0},
{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x0},
{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x1},
/* power state controls amps */
{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
};
static struct hda_verb stac92hd71bxx_core_init[] = {
/* set master volume and direct control */
{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
......@@ -701,6 +752,8 @@ static struct hda_verb stac927x_core_init[] = {
static struct hda_verb stac9205_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
/* enable analog pc beep path */
{ 0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5},
{}
};
......@@ -823,6 +876,33 @@ static struct snd_kcontrol_new stac92hd73xx_10ch_mixer[] = {
{ } /* end */
};
static struct snd_kcontrol_new stac92hd83xxx_mixer[] = {
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x1b, 0, HDA_INPUT),
HDA_CODEC_MUTE("DAC0 Capture Switch", 0x1b, 0, HDA_INPUT),
HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x1b, 0x1, HDA_INPUT),
HDA_CODEC_MUTE("DAC1 Capture Switch", 0x1b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Capture Volume", 0x1b, 0x2, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Capture Switch", 0x1b, 0x2, HDA_INPUT),
HDA_CODEC_VOLUME("Line In Capture Volume", 0x1b, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("Line In Capture Switch", 0x1b, 0x3, HDA_INPUT),
/*
HDA_CODEC_VOLUME("Mic Capture Volume", 0x1b, 0x4, HDA_INPUT),
HDA_CODEC_MUTE("Mic Capture Switch", 0x1b 0x4, HDA_INPUT),
*/
{ } /* end */
};
static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = {
STAC_INPUT_SOURCE(2),
......@@ -1333,6 +1413,27 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
{} /* terminator */
};
static unsigned int ref92hd83xxx_pin_configs[14] = {
0x02214030, 0x02211010, 0x02a19020, 0x02170130,
0x01014050, 0x01819040, 0x01014020, 0x90a3014e,
0x40f000f0, 0x40f000f0, 0x40f000f0, 0x40f000f0,
0x01451160, 0x98560170,
};
static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
};
static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
[STAC_92HD83XXX_REF] = "ref",
};
static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD71BXX_REF),
};
static unsigned int ref92hd71bxx_pin_configs[10] = {
0x02214030, 0x02a19040, 0x01a19020, 0x01014010,
0x0181302e, 0x01114010, 0x01019020, 0x90a000f0,
......@@ -2587,8 +2688,8 @@ static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec,
}
/* labels for mono mux outputs */
static const char *stac92xx_mono_labels[3] = {
"DAC0", "DAC1", "Mixer"
static const char *stac92xx_mono_labels[4] = {
"DAC0", "DAC1", "Mixer", "DAC2"
};
/* create mono mux for mono out on capable codecs */
......@@ -2692,16 +2793,19 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
}
continue;
found:
wcaps = get_wcaps(codec, nid);
wcaps = get_wcaps(codec, nid) &
(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
if (wcaps & AC_WCAP_OUT_AMP) {
if (wcaps) {
sprintf(name, "%s Capture Volume",
stac92xx_dmic_labels[dimux->num_items]);
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_VOL,
name,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
HDA_COMPOSE_AMP_VAL(nid, 3, 0,
(wcaps & AC_WCAP_OUT_AMP) ?
HDA_OUTPUT : HDA_INPUT));
if (err < 0)
return err;
}
......@@ -2825,8 +2929,8 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
hp_speaker_swap = 1;
}
if (spec->autocfg.mono_out_pin) {
int dir = (get_wcaps(codec, spec->autocfg.mono_out_pin)
& AC_WCAP_OUT_AMP) ? HDA_OUTPUT : HDA_INPUT;
int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
u32 caps = query_amp_caps(codec,
spec->autocfg.mono_out_pin, dir);
hda_nid_t conn_list[1];
......@@ -2848,21 +2952,26 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
!(wcaps & AC_WCAP_LR_SWAP))
spec->mono_nid = conn_list[0];
}
/* all mono outs have a least a mute/unmute switch */
err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
"Mono Playback Switch",
HDA_COMPOSE_AMP_VAL(spec->autocfg.mono_out_pin,
1, 0, dir));
if (err < 0)
return err;
/* check to see if there is volume support for the amp */
if ((caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT) {
err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL,
"Mono Playback Volume",
HDA_COMPOSE_AMP_VAL(spec->autocfg.mono_out_pin,
1, 0, dir));
if (dir) {
hda_nid_t nid = spec->autocfg.mono_out_pin;
/* most mono outs have a least a mute/unmute switch */
dir = (dir & AC_WCAP_OUT_AMP) ? HDA_OUTPUT : HDA_INPUT;
err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
"Mono Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 1, 0, dir));
if (err < 0)
return err;
/* check for volume support for the amp */
if ((caps & AC_AMPCAP_NUM_STEPS)
>> AC_AMPCAP_NUM_STEPS_SHIFT) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_VOL,
"Mono Playback Volume",
HDA_COMPOSE_AMP_VAL(nid, 1, 0, dir));
if (err < 0)
return err;
}
}
stac92xx_auto_set_pinctl(codec, spec->autocfg.mono_out_pin,
......@@ -2942,7 +3051,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = dig_out;
if (spec->autocfg.dig_in_pin)
if (dig_in && spec->autocfg.dig_in_pin)
spec->dig_in_nid = dig_in;
if (spec->kctl_alloc)
......@@ -3338,7 +3447,12 @@ static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
& 0x000000ff;
presence = get_hp_pin_presence(codec, nid);
idx = 1 << idx;
/* several codecs have two power down bits */
if (spec->pwr_mapping)
idx = spec->pwr_mapping[idx];
else
idx = 1 << idx;
if (presence)
val &= ~idx;
......@@ -3674,6 +3788,94 @@ static int patch_stac92hd73xx(struct hda_codec *codec)
return 0;
}
static struct hda_input_mux stac92hd83xxx_dmux = {
.num_items = 3,
.items = {
{ "Analog Inputs", 0x03 },
{ "Digital Mic 1", 0x04 },
{ "Digital Mic 2", 0x05 },
}
};
static int patch_stac92hd83xxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
int err;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
spec->mono_nid = 0x19;
spec->digbeep_nid = 0x21;
spec->dmic_nids = stac92hd83xxx_dmic_nids;
spec->dmux_nids = stac92hd83xxx_dmux_nids;
spec->adc_nids = stac92hd83xxx_adc_nids;
spec->pwr_nids = stac92hd83xxx_pwr_nids;
spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
spec->multiout.dac_nids = stac92hd83xxx_dac_nids;
spec->init = stac92hd83xxx_core_init;
switch (codec->vendor_id) {
case 0x111d7605:
spec->multiout.num_dacs = STAC92HD81_DAC_COUNT;
break;
default:
spec->num_pwrs--;
spec->init++; /* switch to config #2 */
spec->multiout.num_dacs = STAC92HD83_DAC_COUNT;
}
spec->mixer = stac92hd83xxx_mixer;
spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
spec->num_dmics = STAC92HD83XXX_NUM_DMICS;
spec->dinput_mux = &stac92hd83xxx_dmux;
spec->pin_nids = stac92hd83xxx_pin_nids;
spec->board_config = snd_hda_check_board_config(codec,
STAC_92HD83XXX_MODELS,
stac92hd83xxx_models,
stac92hd83xxx_cfg_tbl);
again:
if (spec->board_config < 0) {
snd_printdd(KERN_INFO "hda_codec: Unknown model for"
" STAC92HD83XXX, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
if (err < 0) {
stac92xx_free(codec);
return err;
}
spec->pin_configs = spec->bios_pin_configs;
} else {
spec->pin_configs = stac92hd83xxx_brd_tbl[spec->board_config];
stac92xx_set_config_regs(codec);
}
err = stac92xx_parse_auto_config(codec, 0x1d, 0);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
"available, default to model=ref\n");
spec->board_config = STAC_92HD83XXX_REF;
goto again;
}
err = -EINVAL;
}
if (err < 0) {
stac92xx_free(codec);
return err;
}
codec->patch_ops = stac92xx_patch_ops;
return 0;
}
static int patch_stac92hd71bxx(struct hda_codec *codec)
{
struct sigmatel_spec *spec;
......@@ -4395,6 +4597,8 @@ struct hda_codec_preset snd_hda_preset_sigmatel[] = {
{ .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 },
{ .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 },
{ .id = 0x111d7603, .name = "92HD75B3X5", .patch = patch_stac92hd71bxx},
{ .id = 0x111d7604, .name = "92HD83C1X5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7605, .name = "92HD81B1X5", .patch = patch_stac92hd83xxx},
{ .id = 0x111d7608, .name = "92HD75B2X5", .patch = patch_stac92hd71bxx},
{ .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx },
{ .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册