Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Use blast_scache_range, blast_inv_scache_range for mips32/mips64 scache
routine.  Also initialize waybit for MIPS32/MIPS64 S-cache.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These are needed for au1550_ac97 module.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

kmalloc under spin_lock can't sleep.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Don't ask.
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

FIXADDR_TOP is used for HIGHMEM and for upper limit of vmalloc area on
32bit kernel.  TX39XX and TX49XX have "reserved" segment in CKSEG3
area.  0xff000000-0xff3fffff on TX49XX and 0xff000000-0xfffeffff on
TX39XX are reserved (unmapped, uncached) therefore can not be used as
mapped area.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The first timer interrupt setup already happens in time_init().
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

mips_cpu_irq_init() does clear_c0_status(ST0_IM) first, so
set_c0_status(ST0_IM) isn't necessary.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch removes unused system type name.
DDB5074 and DDB5476 were already removed.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

They have been obsoleted by the ELF header EI_CLASS and EI_DATA fields
in combination with e_flags.  Afaics EM_MIPS_RS3_LE and EM_MIPS_RS4_BE
never had any practical relevance.  Binutils will not produce such
binaries and the kernel will not accept them as MIPS binaries.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Without SMTC on non-Malta will blow up.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The driver has been removed a while ago already.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This fixes a resource collision of RAM and I/O memory on systems that
use the physical address space multiple times.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 o Fix the build error Wind River PPMC board caused by the change of
   plat_setup hook interface.
 o Rewrite first level interrupt dispatch code to C.
Signed-off-by: NRongkai.Zhan <rongkai.zhan@windriver.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The recent vsnprintf() fix introduced an off-by-one, and it's now
possible to overrun the target buffer by one byte.

The "end" pointer points to past the end of the buffer, so if we
have to truncate the result, it needs to be done though "end[-1]".

[ This is just an alternate and simpler patch to one proposed by Andrew
  and Jeremy, who actually noticed the problem ]
Acked-by: NAndrew Morton <akpm@osdl.org>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'nommu' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] nommu: backtrace code must not reference a discarded section
  [ARM] nommu: Initial uCLinux support for MMU-based CPUs
  [ARM] nommu: prevent Xscale-based machines being selected
  [ARM] nommu: export flush_dcache_page()
  [ARM] nommu: remove fault-armv, mmap and mm-armv files from nommu build
  [ARM] Remove TABLE_SIZE, and several unused function prototypes
  [ARM] nommu: Provide a simple flush_dcache_page implementation
  [ARM] nommu: add arch/arm/Kconfig-nommu to Kconfig files
  [ARM] nommu: add stubs for ioremap and friends
  [ARM] nommu: avoid selecting TLB and CPU specific copy code
  [ARM] nommu: uaccess tweaks
  [ARM] nommu: adjust headers for !MMU ARM systems
  [ARM] nommu: we need the TLS register emulation for nommu mode

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3672/1: PXA: don't probe output GPIOs for interrupt
  [ARM] 3671/1: ep93xx: add cirrus logic edb9315 support
  [ARM] 3370/2: ep93xx: add crunch support
  [ARM] 3665/1: crunch: add ptrace support
  [ARM] 3664/1: crunch: add signal frame save/restore
  [ARM] 3663/1: fix resource->end off-by-one thinko during physmap conversion
  [ARM] 3662/1: ixp23xx: don't include asm/hardware.h in uncompress.h
  [ARM] 3660/1: Remove legacy defines
  [ARM] 3661/1: S3C2412: Fix compilation if CPU_S3C2410 only
  [ARM] 3658/1: S3C244X: Change usb-gadget name to s3c2440-usbgadget
  [ARM] Remove the __arch_* layer from uaccess.h

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Documentation/watchdog update
  [WATCHDOG] convert AT91RM9200 watchdog to platform driver
  [WATCHDOG] add WDIOC_GETTIMELEFT ioctl
  [WATCHDOG] Pre-Timeout flags

plist.h uses container_of, which is defined in kernel.h.
Include kernel.h in plist.h as the kernel.h include does not longer
happen automatically on all architectures.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds earlier initialization of spi_device.mode, as needed
on boards using nondefault chipselect polarity.  An example would be
ones using the RS5C348 RTC without an external signal inverter between
the RTC chipselect and the SPI controller.

Without this mechanism, the first setup() call for that chip would
wrongly enable chips, corrupting transfers to/from other chips sharing
that SPI bus.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input:
  Input: db9 - fix potential buffer overrun
  Input: atkbd - fix hardware autorepeat
  Input: wistron - add mapping for Wistron MS 2111

Remove the hard coded ROM region setups. Use Kconfig options to specify
these in a generic way for platorms that want them.

This builds on top of the other recent m68knommu linker script changes
to completely remove fixed board configurations.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use Kconfig options to setup the optional ROM region used on some
platforms. We used to define this in the linker script on a per
board basis. The configure options are more flexible and clean up
the linker script a lot.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix 68EZ328/config.c asm to be clean for new gcc versions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix 68VZ328/config.c asm to be clean for new gcc versions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix 68360/config.c asm to be clean for new gcc versions.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>