This patch adds mout_aclk333_sub mux clock and updates gate clocks from
MFC domain to have it as their parent as specified in SoC documentation.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

According to SoC documentation, input 5 of mout_audio muxes is connected
to xxti (named fin_pll in the driver). This patch corrects defined
parent arrays to match SoC documentation.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

This patch updates mux parent arrays with unpopulated mux inputs, as all
inputs need to be specified in parent arrays passed to
clk_register_mux(), otherwise clk_set_parent() can generate out of bound
accesses to the array.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

This patch adds mux_aclk_200_disp1_sub mux clock, which according to SoC
documentation is the correct parent of DISP1 gate clocks.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

This patch adds mout_aclk266_gscl_sub mux clock and adjusts definitions
of GSCL domain gate clocks to use it as their parent, as specified in
SoC documentation.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

This patch renames all mux clocks to start with mout_ prefix and all div
clocks to start with div_ prefix for consistency with other clocks
already defined this way.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

This patch reorders clock definitions, so they are sorted by register
addresses and bitfield shifts. When at it, blank lines are added to
separate definitions of clocks from different registers.

Overall this should make the driver more readable and reduce the number
of potential conflicts when adding new entries.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NTomasz Figa <t.figa@samsung.com>

Move reg_save[] into CONFIG_PM_SLEEP dependency block as it is used only
by suspend and resume functions.

This fixes the warning on CONFIG_PM_SLEEP=n:
drivers/clk/samsung/clk-exynos-audss.c:29:22: warning: ‘reg_save’ defined but not used [-Wunused-variable]
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

The sysreg (system register) generates control signals for various blocks
like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused
clock at boot-up. This can lead to failures in operation of above blocks,
because they can not be configured properly if this clock is disabled.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description.]
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

Due to incorrect clock specified in MDMA0 node, using MDMA0 controller
could cause system failures, due to wrong clock being controlled. This
patch fixes this by specifying correct clock.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
[t.figa: Corrected commit message and description.]
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure
that the clock is enabled when MDMA0 is used on systems on which
firmware gates the clockby default.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description.]
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

The CLK_GATE_IP_ACP register offset is incorrectly listed making
definition of g2d clock incorrect, which may lead to system failures
when trying to use G2D on systems on which firmware gates this clock
by default. Fix this and the register ordering as well.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description.]
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

The gate clocks for the MFC sysmmus appear to be flipped, i.e.
GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr.
Fix this so that the MFC will start up.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

The SRC_MFC register offset was incorrect, which could cause have caused
wrong calculation of rate of sclk_mfc clock, that could in turn lead to
incorrect operation of MFC. This patch corrects it.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NMike Turquette <mturquette@linaro.org>
[t.figa: Updated patch description]
Signed-off-by: NTomasz Figa <t.figa@samsung.com>

Populate ${DEBUGS_MOUNT_POINT}/clk if CONFIG_DEBUG_FS is set. This
eliminates the extra (annoying) step of enabling the config option
manually.
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'break' after 'goto' is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch adds support for accuracy retrieval on fixed clocks.
It also adds a new dt property called 'clock-accuracy' to define the clock
accuracy.

This can be usefull for oscillator (RC, crystal, ...) definitions which are
always given an accuracy characteristic.
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The clock accuracy is expressed in ppb (parts per billion) and represents
the possible clock drift.
Say you have a clock (e.g. an oscillator) which provides a fixed clock of
20MHz with an accuracy of +- 20Hz. This accuracy expressed in ppb is
20Hz/20MHz = 1000 ppb (or 1 ppm).

Clock users may need the clock accuracy information in order to choose
the best clock (the one with the best accuracy) across several available
clocks.

This patch adds clk accuracy retrieval support for common clk framework by
means of a new function called clk_get_accuracy.
This function returns the given clock accuracy expressed in ppb.

In order to get the clock accuracy, this implementation adds one callback
called recalc_accuracy to the clk_ops structure.
This callback is given the parent clock accuracy (if the clock is not a
root clock) and should recalculate the given clock accuracy.

This callback is optional and may be implemented if the clock is not
a perfect clock (accuracy != 0 ppb).
Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'clk_si570_of_match' is always compiled in. Hence the
helper macro is not needed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Merge tag 'renesas-clock-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into clk-next-shmobile2

Renesas ARM based SoC Clock updates for v3.14

Add support for using emev2 SMU clocks with DT

mvebu clock changes for v3.14

 - mvebu: add the core divider clock driver
 - sparse cleanup

arm: Xilinx Zynq clk patches for v3.14

- Add support for fclk-enable feature

In some use cases Zynq's FPGA clocks are used as static clock
generators for IP in the FPGA part of the SOC for which no Linux driver
exists and would control those clocks. To avoid automatic
gating of these clocks in such cases a new property - fclk-enable - is
added to the clock controller's DT description to accomodate such use
cases. It's value is a bitmask, where a set bit results in enabling
the corresponding FCLK through the clkc.

FPGA clocks are handled following the rules below:

If an FCLK is not enabled by bootloaders, that FCLK will be disabled in
Linux. Drivers can enable and control it through the CCF as usual.

If an FCLK is enabled by bootloaders AND the corresponding bit in the
'fclk-enable' DT property is set, that FCLK will be enabled by the clkc,
resulting in an off by one reference count for that clock. Ensuring it
will always be running.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Extra semicolon is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'vtwm_pll_ops' is local to this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'of_cpu_clk_setup' is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

clk_sp810_timerclken_of_get is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'div_reg' is a pointer. Assign NULL instead of 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

tegra_clk_periph_nodiv_ops is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Local variables used only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

clk_frac_ops is local to this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add a driver for SILabs 570, 571, 598, 599 programmable oscillators.
The devices generate low-jitter clock signals and are reprogrammable via
an I2C interface.
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Adding clocks from a kernel module can cause a NULL pointer
dereference if the parent of a clock is added after the clock is
added. This happens because __clk_init() iterates over the list
of orphans and reparents the orphans to the clock being
registered before creating the debugfs entry for the clock.
Create the debugfs entry first before reparenting the orphans.

Unable to handle kernel NULL pointer dereference at virtual address 00000028
pgd = ef3e4000
[00000028] *pgd=bf810831
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: mmcc_8960(+)
CPU: 0 PID: 52 Comm: modprobe Not tainted 3.12.0-rc2-00023-g1021a28-dirty #659
task: ef319200 ti: ef3a6000 task.ti: ef3a6000
PC is at lock_rename+0x24/0xc4
LR is at debugfs_rename+0x34/0x208
pc : [<c0317238>]    lr : [<c047dfe4>]    psr: 00000013
sp : ef3a7b88  ip : ef3a7ba8  fp : ef3a7ba4
r10: ef3d51cc  r9 : ef3bc680  r8 : ef3d5210
r7 : ef3bc640  r6 : eee287e0  r5 : eee287e0  r4 : 00000000
r3 : ef3bc640  r2 : 00000000  r1 : eee287e0  r0 : 00000000
Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5787d  Table: af3e406a  DAC: 00000015
Process modprobe (pid: 52, stack limit = 0xef3a6240)
Stack: (0xef3a7b88 to 0xef3a8000)
7b80:                   ef3bc640 ee4047e0 00000000 eee287e0 ef3a7bec ef3a7ba8
7ba0: c047dfe4 c0317220 ef3bc680 ef3d51cc ef3a7bdc ef3a7bc0 c06e29d0 c0268784
7bc0: c08946e8 ef3d5210 00000000 ef3bc700 ef3d5290 ef3d5210 ef3bc680 ef3d51cc
7be0: ef3a7c0c ef3a7bf0 c05b9e9c c047dfbc 00000000 00000000 ef3d5210 ef3d5290
7c00: ef3a7c24 ef3a7c10 c05baebc c05b9e30 00000001 00000001 ef3a7c64 ef3a7c28
7c20: c05bb124 c05bae9c bf000cd8 ef3bc7c0 000000d0 c0ff129c bf001774 00000002
7c40: ef3bc740 ef3d5290 ef0f9a10 bf001774 bf00042c 00000061 ef3a7c8c ef3a7c68
7c60: c05bb480 c05baed8 bf001774 ef3d5290 ef0f9a10 bf001774 ef38bc10 ef0f9a00
7c80: ef3a7cac ef3a7c90 c05bb5a8 c05bb3a0 bf001774 00000062 ef0f9a10 ef38bc18
7ca0: ef3a7cec ef3a7cb0 bf00010c c05bb56c 00000000 ef38ba00 00000000 ef3d60d0
7cc0: ef3a7cdc c0fefc24 ef0f9a10 c0a091c0 bf000d24 00000000 bf0029f0 bf006000
7ce0: ef3a7cfc ef3a7cf0 c05156c0 bf000040 ef3a7d2c ef3a7d00 c0513f5c c05156a8
7d00: ef3a7d2c ef0f9a10 ef0f9a10 bf000d24 ef0f9a44 c09ca588 00000000 bf006000
7d20: ef3a7d4c ef3a7d30 c05142b8 c0513ecc ef0fd25c 00000000 bf000d24 c0514214
7d40: ef3a7d74 ef3a7d50 c0512030 c0514220 ef0050a8 ef0fd250 ef0050f8 bf000d24
7d60: ef37c100 c09ed150 ef3a7d84 ef3a7d78 c05139c8 c0511fd8 ef3a7
7d80: c051344c c05139a8 bf000864 c09ca588 ef3a7db4 bf000d24 bf002
7da0: c09ca588 00000000 ef3a7dcc ef3a7db8 c05149dc c0513360 ef3a7
7dc0: ef3a7ddc ef3a7dd0 c0515914 c0514960 ef3a7dec ef3a7de0 bf006
7de0: ef3a7e74 ef3a7df0 c0208800 bf00600c ef3a7e1c ef3a7e00 c04c5
7e00: ffffffff c09d46c4 00000000 bf0029a8 ef3a7e34 ef3a7e20 c024c
7e20: ffffffff c09d46c4 ef3a7e5c ef3a7e38 c024e2fc c024ce40 00000
7e40: ef3a7f48 bf0029b4 bf0029a8 271aeb1c ef3a7f48 bf0029a8 00000001 ef383c00
7e60: bf0029f0 00000001 ef3a7f3c ef3a7e78 c028fac4 c0208718 bf0029b4 00007fff
7e80: c028cd58 000000d2 f0065000 00000000 ef3a7ebc 00000000 00000000 bf0029b4
7ea0: 00000000 bf0029ac bf0029b4 ef3a6000 ef3a7efc c08bf128 00000000 00000000
7ec0: 00000000 00000000 00000000 00000000 6e72656b 00006c65 00000000 00000000
7ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7f00: 00000000 00000000 00000000 271aeb1c ef3a7f2c 00016376 b6f38008 001d3774
7f20: 00000080 c020f968 ef3a6000 00000000 ef3a7fa4 ef3a7f40 c02904dc c028e178
7f40: c020f898 010ccfa8 f0065000 00016376 f0073f60 f0073d7d f007a1e8 00002b24
7f60: 000039e4 00000000 00000000 00000000 0000002f 00000030 00000019 00000016
7f80: 00000012 00000000 00000000 010de1b2 b6f38008 010ccfa8 00000000 ef3a7fa8
7fa0: c020f6c0 c0290434 010de1b2 b6f38008 b6f38008 00016376 001d3774 00000000
7fc0: 010de1b2 b6f38008 010ccfa8 00000080 010de1b2 bedb6f90 010de1c9 0001d8dc
7fe0: 0000000c bedb674c 0001ce30 000094c4 60000010 b6f38008 00000008 0000001d
[<c0317238>] (lock_rename+0x24/0xc4) from [<c047dfe4>] (debugfs_rename+0x34/0x208)
[<c047dfe4>] (debugfs_rename+0x34/0x208) from [<c05b9e9c>] (clk_debug_reparent+0x78/0xc0)
[<c05baebc>] (__clk_reparent+0x2c/0x3c) from [<c05bb124>] (__clk_init+0x258/0x4c8)
[<c05bb124>] (__clk_init+0x258/0x4c8) from [<c05bb480>] (_clk_register+0xec/0x1cc)
[<c05bb480>] (_clk_register+0xec/0x1cc) from [<c05bb5a8>] (devm_clk_register+0x48/0x7c)
[<c05bb5a8>] (devm_clk_register+0x48/0x7c) from [<bf00010c>] (msm_mmcc_8960_probe+0xd8/0x190 [mmcc_8960])
[<bf00010c>] (msm_mmcc_8960_probe+0xd8/0x190 [mmcc_8960]) from [<c05156c0>] (platform_drv_probe+0x24/0x28)
[<c05156c0>] (platform_drv_probe+0x24/0x28) from [<c0513f5c>] (driver_probe_device+0x9c/0x354)
[<c0513f5c>] (driver_probe_device+0x9c/0x354) from [<c05142b8>] (__driver_attach+0xa4/0xa8)
[<c05142b8>] (__driver_attach+0xa4/0xa8) from [<c0512030>] (bus_for_each_dev+0x64/0x98)
[<c0512030>] (bus_for_each_dev+0x64/0x98) from [<c05139c8>] (driver_attach+0x2c/0x30)
[<c05139c8>] (driver_attach+0x2c/0x30) from [<c051344c>] (bus_add_driver+0xf8/0x2a8)
[<c051344c>] (bus_add_driver+0xf8/0x2a8) from [<c05149dc>] (driver_register+0x88/0x104)
[<c05149dc>] (driver_register+0x88/0x104) from [<c0515914>] (__platform_driver_register+0x58/0x6c)
[<c0515914>] (__platform_driver_register+0x58/0x6c) from [<bf006018>] (msm_mmcc_8960_driver_init+0x18/0x24 [mmcc_8960])
[<bf006018>] (msm_mmcc_8960_driver_init+0x18/0x24 [mmcc_8960]) from [<c0208800>] (do_one_initcall+0xf4/0x1b8)
[<c0208800>] (do_one_initcall+0xf4/0x1b8) from [<c028fac4>] (load_module+0x1958/0x22bc)
[<c028fac4>] (load_module+0x1958/0x22bc) from [<c02904dc>] (SyS_init_module+0xb4/0x120)
[<c02904dc>] (SyS_init_module+0xb4/0x120) from [<c020f6c0>] (ret_fast_syscall+0x0/0x48)
Code: e1500001 e1a04000 e1a05001 0a000021 (e5903028)
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Device tree clock binding document for EMMA Mobile EV2 SMU,
And Common clock framework based implementation of it.
Following nodes are defined to describe clock tree.
- renesas,emev2-smu
- renesas,emev2-smu-clkdiv
- renesas,emev2-smu-gclk

These bindings are designed manually based on
 19UH0037EJ1000_SMU : System Management Unit User's Manual

So far, reparent is not implemented, and is fixed to index #0.
Clock tree description is not included, and should be provided
by device-tree.
Signed-off-by: NTakashi Yoshii <takasi-y@ops.dti.ne.jp>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Merge tag 'clk-hisilicon' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into clk-next-hisilicon

MSTP clocks are gate clocks controlled through a register that handles
up to 32 clocks. The register is often sparsely populated.

Those clocks are found on Renesas ARM SoCs.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

DIV6 clocks are divider gate clocks controlled through a single
register. The divider is expressed on 6 bits, hence the name, and can
take values from 1/1 to 1/64.

Those clocks are found on Renesas ARM SoCs.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>