提交 f94859c2 编写于 作者: L Laurent Pinchart 提交者: Mike Turquette

clk: shmobile: Add MSTP clock support

MSTP clocks are gate clocks controlled through a register that handles
up to 32 clocks. The register is often sparsely populated.

Those clocks are found on Renesas ARM SoCs.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
上级 abe844aa
* Renesas CPG Module Stop (MSTP) Clocks
The CPG can gate SoC device clocks. The gates are organized in groups of up to
32 gates.
This device tree binding describes a single 32 gate clocks group per node.
Clocks are referenced by user nodes by the MSTP node phandle and the clock
index in the group, from 0 to 31.
Required Properties:
- compatible: Must be one of the following
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
- "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
- "renesas,cpg-mstp-clock" for generic MSTP gate clocks
- reg: Base address and length of the I/O mapped registers used by the MSTP
clocks. The first register is the clock control register and is mandatory.
The second register is the clock status register and is optional when not
implemented in hardware.
- clocks: Reference to the parent clocks, one per output clock. The parents
must appear in the same order as the output clocks.
- #clock-cells: Must be 1
- clock-output-names: The name of the clocks as free-form strings
- renesas,indices: Indices of the gate clocks into the group (0 to 31)
The clocks, clock-output-names and renesas,indices properties contain one
entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
gate clocks must not be declared.
Example
-------
#include <dt-bindings/clock/r8a7790-clock.h>
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
<&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
<&mmc0_clk>;
#clock-cells = <1>;
clock-output-names =
"tpu0", "mmcif1", "sdhi3", "sdhi2",
"sdhi1", "sdhi0", "mmcif0";
renesas,clock-indices = <
R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
R8A7790_CLK_MMCIF0
>;
};
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
# for emply built-in.o
obj-n := dummy
/*
* R-Car MSTP clocks
*
* Copyright (C) 2013 Ideas On Board SPRL
*
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*/
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/spinlock.h>
/*
* MSTP clocks. We can't use standard gate clocks as we need to poll on the
* status register when enabling the clock.
*/
#define MSTP_MAX_CLOCKS 32
/**
* struct mstp_clock_group - MSTP gating clocks group
*
* @data: clocks in this group
* @smstpcr: module stop control register
* @mstpsr: module stop status register (optional)
* @lock: protects writes to SMSTPCR
*/
struct mstp_clock_group {
struct clk_onecell_data data;
void __iomem *smstpcr;
void __iomem *mstpsr;
spinlock_t lock;
};
/**
* struct mstp_clock - MSTP gating clock
* @hw: handle between common and hardware-specific interfaces
* @bit_index: control bit index
* @group: MSTP clocks group
*/
struct mstp_clock {
struct clk_hw hw;
u32 bit_index;
struct mstp_clock_group *group;
};
#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
{
struct mstp_clock *clock = to_mstp_clock(hw);
struct mstp_clock_group *group = clock->group;
u32 bitmask = BIT(clock->bit_index);
unsigned long flags;
unsigned int i;
u32 value;
spin_lock_irqsave(&group->lock, flags);
value = clk_readl(group->smstpcr);
if (enable)
value &= ~bitmask;
else
value |= bitmask;
clk_writel(value, group->smstpcr);
spin_unlock_irqrestore(&group->lock, flags);
if (!enable || !group->mstpsr)
return 0;
for (i = 1000; i > 0; --i) {
if (!(clk_readl(group->mstpsr) & bitmask))
break;
cpu_relax();
}
if (!i) {
pr_err("%s: failed to enable %p[%d]\n", __func__,
group->smstpcr, clock->bit_index);
return -ETIMEDOUT;
}
return 0;
}
static int cpg_mstp_clock_enable(struct clk_hw *hw)
{
return cpg_mstp_clock_endisable(hw, true);
}
static void cpg_mstp_clock_disable(struct clk_hw *hw)
{
cpg_mstp_clock_endisable(hw, false);
}
static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
{
struct mstp_clock *clock = to_mstp_clock(hw);
struct mstp_clock_group *group = clock->group;
u32 value;
if (group->mstpsr)
value = clk_readl(group->mstpsr);
else
value = clk_readl(group->smstpcr);
return !!(value & BIT(clock->bit_index));
}
static const struct clk_ops cpg_mstp_clock_ops = {
.enable = cpg_mstp_clock_enable,
.disable = cpg_mstp_clock_disable,
.is_enabled = cpg_mstp_clock_is_enabled,
};
static struct clk * __init
cpg_mstp_clock_register(const char *name, const char *parent_name,
unsigned int index, struct mstp_clock_group *group)
{
struct clk_init_data init;
struct mstp_clock *clock;
struct clk *clk;
clock = kzalloc(sizeof(*clock), GFP_KERNEL);
if (!clock) {
pr_err("%s: failed to allocate MSTP clock.\n", __func__);
return ERR_PTR(-ENOMEM);
}
init.name = name;
init.ops = &cpg_mstp_clock_ops;
init.flags = CLK_IS_BASIC;
init.parent_names = &parent_name;
init.num_parents = 1;
clock->bit_index = index;
clock->group = group;
clock->hw.init = &init;
clk = clk_register(NULL, &clock->hw);
if (IS_ERR(clk))
kfree(clock);
return clk;
}
static void __init cpg_mstp_clocks_init(struct device_node *np)
{
struct mstp_clock_group *group;
struct clk **clks;
unsigned int i;
group = kzalloc(sizeof(*group), GFP_KERNEL);
clks = kzalloc(MSTP_MAX_CLOCKS * sizeof(*clks), GFP_KERNEL);
if (group == NULL || clks == NULL) {
kfree(group);
kfree(clks);
pr_err("%s: failed to allocate group\n", __func__);
return;
}
spin_lock_init(&group->lock);
group->data.clks = clks;
group->smstpcr = of_iomap(np, 0);
group->mstpsr = of_iomap(np, 1);
if (group->smstpcr == NULL) {
pr_err("%s: failed to remap SMSTPCR\n", __func__);
kfree(group);
kfree(clks);
return;
}
for (i = 0; i < MSTP_MAX_CLOCKS; ++i) {
const char *parent_name;
const char *name;
u32 clkidx;
int ret;
/* Skip clocks with no name. */
ret = of_property_read_string_index(np, "clock-output-names",
i, &name);
if (ret < 0 || strlen(name) == 0)
continue;
parent_name = of_clk_get_parent_name(np, i);
ret = of_property_read_u32_index(np, "renesas,clock-indices", i,
&clkidx);
if (parent_name == NULL || ret < 0)
break;
if (clkidx >= MSTP_MAX_CLOCKS) {
pr_err("%s: invalid clock %s %s index %u)\n",
__func__, np->name, name, clkidx);
continue;
}
clks[clkidx] = cpg_mstp_clock_register(name, parent_name, i,
group);
if (!IS_ERR(clks[clkidx])) {
group->data.clk_num = max(group->data.clk_num, clkidx);
/*
* Register a clkdev to let board code retrieve the
* clock by name and register aliases for non-DT
* devices.
*
* FIXME: Remove this when all devices that require a
* clock will be instantiated from DT.
*/
clk_register_clkdev(clks[clkidx], name, NULL);
} else {
pr_err("%s: failed to register %s %s clock (%ld)\n",
__func__, np->name, name, PTR_ERR(clks[clkidx]));
}
}
of_clk_add_provider(np, of_clk_src_onecell_get, &group->data);
}
CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册