[airlied: fix V_A_N_V to not be safe and fix check to make sure only r500
 - bump userspace version]
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Permits MSAA and D3D-style rasterization.

[airlied: add rs600]
Signed-off-by: NCorbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Switching between TV and VGA caused VGA to break on some systems
since the TV encoder was left enabled when VGA was used.

fixes fdo bug 25520.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

May fix fdo bug 26582.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On systems with the tv dac shared between DVI and TV,
we can only use the dac for one of the connectors.
However, when using a digital monitor on the DVI port,
you can use the dac for the TV connector just fine.
Check the use_digital status when resolving the conflict.

Fixes fdo bug 27649, possibly others.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Got broken during the evergreen merge.
Fixes fdo bug 27001.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Typo in in flush leaded to no flush of the RS600 tlb which
ultimately leaded to massive system ram corruption, with
this patch everythings seems to work properly.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This will help figuring out GPU when looking at bugs log.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The 3rd dimension should be minified too.
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On X startup we were getting a flicker where there shouldn't have been one.
the X DDX calls the kernel to set the properties to the same values (yes
it could be smarter), however the kernel was doing a pointless modeset then,
making my nice smooth boot ugly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

shr/shl ops need the full dst rather than the pre-masked
version.  Fixes fdo bug 27478 and kernel bug 15738.

v2: remove some unsed vars, add comments
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch is against the drm-fbdevfix1 branch. It removes the
drm_fb_helper_setcolreg function. The reason is that fb_setcolreg is only
used in the case where fb_setcmap is called and no fb_ops->fb_setcmap is
used. In the drm case we always need a fb_setcmap hook to handle multiple
crtcs so we don't need a fb_setcolreg hook. Please apply.
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

a) slow work is always used now for any fbcon hotplug, as its not
   a fast task and is more suited to being ran under slow work.

b) attempt to not do any fbdev changes when X is running as we'll
   just mess it up. This hooks set_par to hopefully do the changes
   once X hands control to fbdev.

This also adds the nouveau/intel hotplug support.
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we are running in a headless environment we have no idea what
output the user might plug in later, we only have hotplug detect
from the digital outputs. So if we detect no connected outputs at
initialisation, start a slow work operation to poll every 5 seconds
for an output.

this is only hooked up for radeon so far, on hw where we have full
hotplug detection there is no need for this.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This breaks the connection between the core drm connector list
and the fbdev connector usage, and allows them to become disjoint
in the future. It also removes the untype void* that was in the
connector struct to support this.

All connectors are added to the fbdev now but this could be
changed in the future.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This move to using the list of crtcs in the fb helper and cleans up the
whole picking code, now we store the crtc/connectors we want directly
into the modeset and we use the modeset directly to set the mode.

Fixes from James Simmons and Ben Skeggs.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work.

This patch

a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs.
b) migrated all the fb helper functions out of the crtc helper file into the fb helper file.
c) pushed the fb probing/hotplug control into the driver
d) makes the surface sizes into a structure for ease of passing
This changes the intel/radeon/nouveau drivers to use the new helper.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some vbios dac_adj tables are all zeros.  Check for that
case and use the default table if so.

Should fix fdo bug 27478.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- make sure legacy dac1 has an enc priv
- remove unused num var
- no need for extra tv_dac var in atom dac functions
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- fix formatting
- clean up tv_dac_cntl handling for tv
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is an unlikely memory leak, but we may as well fix it.  It's easy
to fix and every static checker will complain if we don't.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

bad cast was overwriting the tvdac adj values
Fixes fdo bug 27478
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

ttm_page_pool file is hooked ttm_page_alloc_debugfs for pool
allocator state.
Signed-off-by: NPauli Nieminen <suokkos@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This simplify and improve GPU reset for R1XX-R6XX hw, it's
not 100% reliable here are result:
- R1XX/R2XX works bunch of time in a row, sometimes it
  seems it can work indifinitly
- R3XX/R3XX the most unreliable one, sometimes you will be
  able to reset few times, sometimes not even once
- R5XX more reliable than previous hw, seems to work most
  of the times but once in a while it fails for no obvious
  reasons (same status than previous reset just no same
  happy ending)
- R6XX/R7XX are lot more reliable with this patch, still
  it seems that it can fail after a bunch (reset every
  2sec for 3hour bring down the GPU & computer)

This have been tested on various hw, for some odd reasons
i wasn't able to lockup RS480/RS690 (while they use to
love locking up).

Note that on R1XX-R5XX the cursor will disapear after
lockup haven't checked why, switch to console and back
to X will restore cursor.

Next step is to record the bogus command that leaded to
the lockup.

V2 Fix r6xx resume path to avoid reinitializing blit
module, use the gpu_lockup boolean to avoid entering
inifinite waiting loop on fence while reiniting the GPU
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Patch rename gpu_reset to asic_reset in prevision of having
gpu_reset doing more stuff than just basic asic reset.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch cleanup the fence code, it drops the timeout field of
fence as the time to complete each IB is unpredictable and shouldn't
be bound.

The fence cleanup lead to GPU lockup detection improvement, this
patch introduce a callback, allowing to do asic specific test for
lockup detection. In this patch the CP is use as a first indicator
of GPU lockup. If CP doesn't make progress during 1second we assume
we are facing a GPU lockup.

To avoid overhead of testing GPU lockup frequently due to fence
taking time to be signaled we query the lockup callback every
500msec. There is plenty code comment explaining the design & choise
inside the code.

This have been tested mostly on R3XX/R5XX hw, in normal running
destkop (compiz firefox, quake3 running) the lockup callback wasn't
call once (1 hour session). Also tested with forcing GPU lockup and
lockup was reported after the 1s CP activity timeout.

V2 switch to 500ms timeout so GPU lockup get call at least 2 times
   in less than 2sec.
V3 store last jiffies in fence struct so on ERESTART, EBUSY we keep
   track of how long we already wait for a given fence
V4 make sure we got up to date cp read pointer so we don't have
   false positive
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The GPIO_I2C_INFO table does not always have
ATOM_MAX_SUPPORTED_DEVICE entries. Limit
the number of indices to the size of the
table.

Should fix Novell bug 589022.

v2: fix typo
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Gleaned from the Mesa code.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=27355 .
Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some GPUs have an APM/ACPI PM mode selection switch and some BIOSes
set this to APM. We really want this in ACPI mode for Linux.
Signed-off-by: NDave Airlie <airlied@redhat.com>

These GPUs should be setting these registers up also.
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we resume in a bad way, we'll get 0xffffffff in wptr, and then
oops with no console. This just adds a sanity check so that we can
avoid the oops and hopefully get more details out of people's systems.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Need to enable the VID stream after link training
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Turn off hw i2c by default except for mm i2c which
is hw only until we sort out the remaining prescale
issues on older chips.  hw i2c can be enabled with
hw_i2c=1.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This allows us to remove the internal bit algo bus used by
the radeon i2c algo.  We now register a radeon algo adapter
if the gpio line is hw capable and the hw inplementation is
available, otherwise we register a bit algo adapter.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Doesn't seem to work reliably and the pci quirks don't
always work.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- Add module option to force the display priority
  0 = auto, 1 = normal, 2 = high
- Default to high on r3xx/r4xx/rv515 chips
  Fixes flickering problems during heavy acceleration
  due to underflow to the display controllers
- Fill in minimal support for RS600

v2 - update display priority when bandwidth is updated
so the user can change the parameter at runtime and it
will take affect on the next modeset.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Seems to have gotten lost in the evergreen merge.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some systems have LCD* rather than DFP* device tags in the bios
for eDP connectors; notably the new apple iMac. This fixes
things up so eDP connectors with either tag will work.

v2: fix typo
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>