[airlied: fix V_A_N_V to not be safe and fix check to make sure only r500
 - bump userspace version]
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Permits MSAA and D3D-style rasterization.

[airlied: add rs600]
Signed-off-by: NCorbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Switching between TV and VGA caused VGA to break on some systems
since the TV encoder was left enabled when VGA was used.

fixes fdo bug 25520.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

May fix fdo bug 26582.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On systems with the tv dac shared between DVI and TV,
we can only use the dac for one of the connectors.
However, when using a digital monitor on the DVI port,
you can use the dac for the TV connector just fine.
Check the use_digital status when resolving the conflict.

Fixes fdo bug 27649, possibly others.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Got broken during the evergreen merge.
Fixes fdo bug 27001.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Typo in in flush leaded to no flush of the RS600 tlb which
ultimately leaded to massive system ram corruption, with
this patch everythings seems to work properly.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This will help figuring out GPU when looking at bugs log.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

PORT_HOTPLUG_EN has allready been setup in i915_driver_irq_postinstall(),
when intel_dp_detect() runs.

Delete the DP[BCD]_HOTPLUG_INT_EN defines, they are not referenced anymore.

I found this while searching for a fix for
        https://bugzilla.redhat.com/show_bug.cgi?id=528312Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: NEric Anholt <eric@anholt.net>

This should be a small power savings. Tested on Lenovo T410 (Ironlake), LVDS
VGA and DisplayPort, up to 1920x1200R.

v2: Add Sandybridge support, fix obvious math error.
Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Update the self-refresh watermark for display plane/cursor and enable
the memory self-refresh on Ironlake. The watermark is also updated for
the active display plane.

More than 1W idle power is saved on one Ironlake laptop after enabling
memory self-refresh.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Previously, after setting up the Pineview CxSR state, i9xx_update_wm would
get called and overwrite our state.

BTW: We will disable the self-refresh and never enable it any more if we
can't find the appropriate the latency on pineview plaftorm. In such case
the update_wm callback will be NULL.

The bitmask macro is also defined to access the corresponding fifo
watermark register.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Otherwise it will cause that S-video output becomes black/white when
switching to other TV format.

http://bugs.freedesktop.org/show_bug.cgi?id=23916Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NArnold <arnold.erbsloeh@web.de>
Tested-by: NBazin <bazin.cz@gmail.com>
Tested-by: NNigel <nigel_tuck@eircom.net>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

SDVO on Ibexpeak PCH with Ironlake is multiplexed with
HDMIB port, and only has SDVOB port.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The existing code handling the DPMS ON event is much more careful to
ensure that these registers are enabled according to strict sequencing
requirements. Enabling these early in mode_set simply defeats that.
Signed-off-by: NCarl Worth <cworth@cworth.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

->dev_private at that point is NULL and is initialied only a few lines
later.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This reverts commit 6070a4a9.

The quirk for this SDVO device on IBM specific board is just a hack
in old code which showed the broken multifunction SDVO support in
the driver. Multifunction SDVO patch provided the right fix for it.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

With new intel_encoder/intel_connector structure change, each supported
connector type on SDVO device will be created as a new 'intel_connector',
and all attached to one 'intel_encoder' for its SDVO port.

The SDVO encoder will handle SDVO protocol stuff, and each connector does
its own part of work now, like detection is only to check if current active
output is itself, etc.

Update since last submit:
- Fixed SDVO TV property creation failure by incorrect set target output call
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Added by original eDP support patch, not used any more.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

As all display drivers have been converted, remove the left reference
for connector object in old structure.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Also remove old UMS copied code for get_crtc.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Probably only matters for format-converting dongles, but might as well
get it right all the time.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

DP on Cougarpoint has new training pattern definitions, and
new transcoder DP control register is used to determine the mapping
for transcoder and DP digital output. And eDP for Sandybridge has
new voltage and pre-emphasis level definitions.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Fix transcoder select bit for HDMI on CPT.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Fix the transcoder select bit for LVDS on CPT.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

To make CRT force detect reliable on Cougarpoint, we need to
disable DAC before force detect, and restore back when trigger
is completed.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Cougarpoint is the new PCH for Sandybridge CPU. This one resolves the
chipset change for display pipeline compared to previous Ibexpeak PCH.

Sandybridge/Cougarpoint has different FDI training parameters, so this also
makes seperate FDI training functions for IBX and CPT. Other change includes
new transcoder DPLL select function to set which DPLL for transcoder to pick
up.

And with another new transcoder C introduced in Cougarpoint, each connector
has new transcoder select bits. This one adds that change to light up VGA.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

PCH is the new name for south bridge from Ironlake/Sandybridge,
which contains most of the display outputs except eDP. This one
adds a probe function to detect current PCH type, and method to
detect Cougarpoint PCH.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Integrated TV is deprecated in new chips from Ironlake.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

OpRegion event on 965G requires legacy BLC event enabled in pipe stat. As LVDS
could be on either pipe now, we should enable BLC event on both pipe. If fail to
do so, we couldn't handle the brightness request triggered from graphics
opregion.
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Based on a patch by Zhao Yakui.
Signed-off-by: NEric Anholt <eric@anholt.net>