- 13 12月, 2019 40 次提交
-
-
由 Nir Dotan 提交于
[ Upstream commit da93d2913fdf43d5cde3c5a53ac9cc29684d5c7c ] GRE decap offload is configured when local routes prefix correspond to the local address of one of the offloaded GRE tunnels. The matching check was found to be too strict, such that for a flat GRE configuration, in which the overlay and underlay traffic share the same non-default VRF, decap flow was not offloaded. Relax the check for decap flow offloading. A match occurs if the local address of the tunnel matches the local route address while both share the same VRF table. Fixes: 4607f6d2 ("mlxsw: spectrum_router: Support IPv4 underlay decap") Signed-off-by: NNir Dotan <nird@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Geert Uytterhoeven 提交于
[ Upstream commit b0d7fbf8b174168c580bb310964c3c809e5569a9 ] The workaround for the wrong hierarchy of the 3DG-{A,B} power domains on R-Car E3 ES1.0 corrected the parent domains. However, the 3DG-{A,B} power domains were still initialized and powered in the wrong order, causing 3DG operation to fail. Fix this by changing the order in the table at runtime, when running on an affected SoC. Fixes: 086b3999 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jakub Audykowicz 提交于
[ Upstream commit afd0a8006e98b1890908f81746c94ca5dae29d7c ] If for some reason an association's fragmentation point is zero, sctp_datamsg_from_user will try to endlessly try to divide a message into zero-sized chunks. This eventually causes kernel panic due to running out of memory. Although this situation is quite unlikely, it has occurred before as reported. I propose to add this simple last-ditch sanity check due to the severity of the potential consequences. Signed-off-by: NJakub Audykowicz <jakub.audykowicz@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Bjorn Andersson 提交于
[ Upstream commit 2abf856202fd3e4883e4c518acaa9a023b0dbe54 ] Drop the halt check of the UFS symbol clocks, in accordance with other platforms. This makes clk_disable_unused() happy and makes it possible to turn the clocks on again without an error. Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NStephen Boyd <sboyd@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jonathan Marek 提交于
[ Upstream commit 16ad9501b1f2edebe24f8cf3c09da0695871986b ] This fixes the case when CONFIG_QCOM_SCM is not enabled, and linux/errno.h has not been included previously. Signed-off-by: NJonathan Marek <jonathan@marek.ca> Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Andreas Pape 提交于
[ Upstream commit 3c28b91380dd1183347d32d87d820818031ebecf ] usb_control_msg returns in case of a successfully sent message the number of sent bytes as a positive number. Don't use this value as a return value for stk_camera_read_reg, as a non-zero return value is used as an error condition in some cases when stk_camera_read_reg is called. Signed-off-by: NAndreas Pape <ap@ca-pape.de> Reviewed-by: NKieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dmitry Safonov 提交于
[ Upstream commit c96cf923a98d1b094df9f0cf97a83e118817e31b ] There might be situations where tty_ldisc_lock() has blocked, but there is already IO on tty and it prevents line discipline changes. It might theoretically turn into dead-lock. Basically, provide more priority to pending tty_ldisc_lock() than to servicing reads/writes over tty. User-visible issue was reported by Mikulas where on pa-risc with Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper locking in tty_reopen(). Cc: Jiri Slaby <jslaby@suse.com> Reported-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NDmitry Safonov <dima@arista.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Paul Kocialkowski 提交于
[ Upstream commit 925c5afd78c40169c7e0e6adec52d5119ff43751 ] Unlike in previous generations, the system-control register range is not limited to a size of 0x30 on the H3. In particular, the EMAC clock configuration register (accessed through syscon) is at offset 0x30 in that range. Extend the register size to its full range (0x1000) as a result. Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Ryan Case 提交于
[ Upstream commit a1fee899e5bed457afc20a6a2ff3915a95cc5942 ] Transfers were being divided into device FIFO sized (64 byte max) operations which would poll for completion within a spin_lock_irqsave / spin_unlock_irqrestore block. This both made things slow by waiting for the FIFO to completely drain before adding further data and would also result in softlocks on large transmissions. This patch allows larger transfers with continuous FIFO additions as space becomes available and removes polling from the interrupt handler. Signed-off-by: NRyan Case <ryandcase@chromium.org> Reviewed-by: NStephen Boyd <swboyd@chromium.org> Reviewed-by: NDouglas Anderson <dianders@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Kieran Bingham 提交于
[ Upstream commit ece41454c6a5ed8f301ef1c37710ab222e577823 ] The streaming object is a key part of handling the UVC device. Although not critical, we are currently missing a call to destroy the mutex on clean up paths, and we are due to extend the objects complexity in the near future. Facilitate easy management of a stream object by creating a pair of functions to handle creating and destroying the allocation. The new uvc_stream_delete() function also performs the missing mutex_destroy() operation. Previously a failed streaming object allocation would cause uvc_parse_streaming() to return -EINVAL, which is inappropriate. If the constructor failes, we will instead return -ENOMEM. While we're here, fix the trivial spelling error in the function banner of uvc_delete(). Signed-off-by: NKieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 zhengbin 提交于
[ Upstream commit 255fbca65137e25b12bced18ec9a014dc77ecda0 ] As the man(2) page for utime/utimes states, EPERM is returned when the second parameter of utime or utimes is not NULL, the caller's effective UID does not match the owner of the file, and the caller is not privileged. However, in a NFS directory mounted from knfsd, it will return EACCES (from nfsd_setattr-> fh_verify->nfsd_permission). This patch fixes that. Signed-off-by: Nzhengbin <zhengbin13@huawei.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Aaro Koskinen 提交于
[ Upstream commit 1c6121c39677175bd372076020948e184bad4b6b ] cn58xx is compatible with cn50xx, so use the latter. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> [paul.burton@mips.com: s/cn52xx/cn50xx/ in commit message.] Signed-off-by: NPaul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Geert Uytterhoeven 提交于
[ Upstream commit 515b2915ee08060ad4f6a3b3de38c5c2c5258e8b ] According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock of the DU module clocks on R-Car D3 is S1D1. Fixes: d71e851d ("clk: renesas: cpg-mssr: Add R8A77995 support") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NStephen Boyd <sboyd@kernel.org> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Takeshi Kihara 提交于
[ Upstream commit 7cf3a216a2b3a672cad3e498c186c9333bdff90a ] According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock of the DU module clocks on R-Car E3 is S1D1. Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 3570a2af ("clk: renesas: cpg-mssr: Add support for R-Car E3") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NStephen Boyd <sboyd@kernel.org> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Joel Stanley 提交于
[ Upstream commit b682c8692442711684befe413cf93cf01c5324ea ] The add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros originate from GCC's longlong.h which in turn was copied from GMP's longlong.h a few decades ago. This was found when compiling with clang: arch/powerpc/math-emu/fnmsub.c:46:2: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions FP_ADD_D(R, T, B); ^~~~~~~~~~~~~~~~~ ... ./arch/powerpc/include/asm/sfp-machine.h:283:27: note: expanded from macro 'sub_ddmmss' : "=r" ((USItype)(sh)), \ ~~~~~~~~~~^~~ Segher points out: this was fixed in GCC over 16 years ago ( https://gcc.gnu.org/r56600 ), and in GMP (where it comes from) presumably before that. Update the add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros to the latest GCC version in order to git rid of the invalid casts. These were taken as-is from GCC's longlong in order to make future syncs obvious. Other parts of sfp-machine.h were left as-is as the file contains more features than present in longlong.h. Link: https://github.com/ClangBuiltLinux/linux/issues/260Signed-off-by: NJoel Stanley <joel@jms.id.au> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Reviewed-by: NSegher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Kees Cook 提交于
[ Upstream commit 8665569e97dd52920713b95675409648986b5b0d ] Given corruption in the ftrace records, it might be possible to allocate tmp_prz without assigning prz to it, but still marking it as needing to be freed, which would cause at least a NULL dereference. smatch warnings: fs/pstore/ram.c:340 ramoops_pstore_read() error: we previously assumed 'prz' could be null (see line 255) https://lists.01.org/pipermail/kbuild-all/2018-December/055528.htmlReported-by: NDan Carpenter <dan.carpenter@oracle.com> Fixes: 2fbea82b ("pstore: Merge per-CPU ftrace records into one") Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Erez Alfasi 提交于
[ Upstream commit 95aac2cdafd8c8298c9b2589c52f44db0d824e0e ] Functions __set_port_type and mlx4_check_port_params returned -EINVAL while the proper return code is -EOPNOTSUPP as a result of an unsupported operation. All drivers should generate this and all users should check for it when detecting an unsupported functionality. Signed-off-by: NErez Alfasi <ereza@mellanox.com> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 David Teigland 提交于
[ Upstream commit 3595c559326d0b660bb088a88e22e0ca630a0e35 ] The warning added in commit 3b0e761b "dlm: print log message when cluster name is not set" did not account for the fact that lockspaces created from userland do not supply a cluster name, so bogus warnings are printed every time a userland lockspace is created. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Rob Herring 提交于
[ Upstream commit f3b2f758ec1e6cdb13c925647cbd8ad4938b78fb ] There's a bug in dtc in checking for duplicate node names when there's another section (e.g. "/ { };"). In this case, skeleton.dtsi provides another section. Upon removal of skeleton.dtsi, the dtb fails to build due to a duplicate node 'fixedregulator@0'. As both nodes were pretty much the same 3.3V fixed regulator, it hasn't really mattered. Fix this by renaming the nodes to something unique. In the process, drop the unit-address which shouldn't be present wtihout reg property. Signed-off-by: NRob Herring <robh@kernel.org> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Neil Armstrong 提交于
[ Upstream commit 458ffce1cb46e46e3cec48b625ed142250475708 ] When dvb_attach fails, probe returns 0, and remove crashes afterwards. This patch sets the return value to -ENODEV when attach fails. Fixes: bd24fcdd ("media: cxd2880-spi: Add support for CXD2880 SPI interface") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jeffrey Hugo 提交于
[ Upstream commit 4f89f7b59a6ea17e81cff212c18a0b580ff5ff27 ] The offsets for the defined BCR reset registers does not match the hardware documentation. Update the values to match the hardware documentation. Fixes: b5f5f525 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver) Signed-off-by: NJeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NStephen Boyd <sboyd@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Chen-Yu Tsai 提交于
[ Upstream commit 7bb7d29cffdd24bf419516d14b6768591e74069e ] The third parent of CSI_MCLK is PLL_PERIPH1, not PLL_PERIPH0. Fix it. Fixes: 0577e485 ("clk: sunxi-ng: Add H3 clocks") Acked-by: NStephen Boyd <sboyd@kernel.org> Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Martin Blumenstingl 提交于
[ Upstream commit 376d8c45bd6ac79f02ecf9ca1606dc5d1b271bc0 ] Unlike the other PLLs on Meson8b the N value "vid_pll_dco" (a better name would be hdmi_pll_dco or - as the datasheet calls it - HPLL) is located at HHI_VID_PLL_CNTL[14:10] instead of [13:9]. This results in an incorrect calculation of the rate of this PLL because the value seen by the kernel is double the actual N (divider) value. Update the offset of the N value to fix the calculation of the PLL rate. Fixes: 28b9fcd0 ("clk: meson8b: Add support for Meson8b clocks") Reported-by: NJianxin Pan <jianxin.pan@amlogic.com> Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181202214220.7715-2-martin.blumenstingl@googlemail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
-
由 Daniel Mack 提交于
[ Upstream commit c40ad24254f1dbd54f2df5f5f524130dc1862122 ] PXA25xx SoCs don't have a USB controller, so drop the node from the common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated node already anyway. While at it, unify the names for the nodes across all pxa platforms. Signed-off-by: NDaniel Mack <daniel@zonque.org> Reported-by: NSergey Yanovich <ynvich@gmail.com> Link: https://patchwork.kernel.org/patch/8375421/Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Miquel Raynal 提交于
[ Upstream commit 4348433d8c0234f44adb6e12112e69343f50f0c5 ] mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both values are unsigned 32-bit entities, so there is no reason to pretend returning a signed one. Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Masahiro Yamada 提交于
[ Upstream commit e07db28eea38ed4e332b3a89f3995c86b713cb5b ] Building a single target in an external module fails due to missing .tmp_versions directory. For example, $ make -C /lib/modules/$(uname -r)/build M=$PWD foo.o will fail in the following way: CC [M] /home/masahiro/foo/foo.o /bin/sh: 1: cannot create /home/masahiro/foo/.tmp_versions/foo.mod: Directory nonexistent This is because $(cmd_crmodverdir) is executed only before building /, %/, %.ko single targets of external modules. Create .tmp_versions in the 'prepare' target. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Paul Walmsley 提交于
[ Upstream commit a4d26f1a0958bb1c2b60c6f1e67c6f5d43e2647b ] During development of a serial console driver with a gcc 8.2.0 toolchain for RISC-V, the following modpost warning appeared: ---- WARNING: vmlinux.o(.data+0x19b10): Section mismatch in reference from the variable .LANCHOR1 to the function .init.text:sifive_serial_console_setup() The variable .LANCHOR1 references the function __init sifive_serial_console_setup() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console ---- ".LANCHOR1" is an ELF local symbol, automatically created by gcc's section anchor generation code: https://gcc.gnu.org/onlinedocs/gccint/Anchored-Addresses.html https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/varasm.c;h=cd9591a45617464946dcf9a126dde277d9de9804;hb=9fb89fa845c1b2e0a18d85ada0b077c84508ab78#l7473 This was verified by compiling the kernel with -fno-section-anchors and observing that the ".LANCHOR1" ELF local symbol disappeared, and modpost no longer warned about the section mismatch. The serial driver code idiom triggering the warning is standard Linux serial driver practice that has a specific whitelist inclusion in modpost.c. I'm neither a modpost nor an ELF expert, but naively, it doesn't seem useful for modpost to report section mismatch warnings caused by ELF local symbols by default. Local symbols have compiler-generated names, and thus bypass modpost's whitelisting algorithm, which relies on the presence of a non-autogenerated symbol name. This increases the likelihood that false positive warnings will be generated (as in the above case). Thus, disable section mismatch reporting on ELF local symbols. The rationale here is similar to that of commit 2e3a10a1 ("ARM: avoid ARM binutils leaking ELF local symbols") and of similar code already present in modpost.c: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/mod/modpost.c?h=v4.19-rc4&id=7876320f88802b22d4e2daf7eb027dd14175a0f8#n1256 This third version of the patch implements a suggestion from Masahiro Yamada <yamada.masahiro@socionext.com> to restructure the code as an additional pattern matching step inside secref_whitelist(), and further improves the patch description. Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yuchung Cheng 提交于
[ Upstream commit e1561fe2dd69dc5dddd69bd73aa65355bdfb048b ] Previously the SNMP TCPTIMEOUTS counter has inconsistent accounting: 1. It counts all SYN and SYN-ACK timeouts 2. It counts timeouts in other states except recurring timeouts and timeouts after fast recovery or disorder state. Such selective accounting makes analysis difficult and complicated. For example the monitoring system needs to collect many other SNMP counters to infer the total amount of timeout events. This patch makes TCPTIMEOUTS counter simply counts all the retransmit timeout (SYN or data or FIN). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yuchung Cheng 提交于
[ Upstream commit ec641b39457e17774313b66697a8a1dc070257bd ] Previously the SNMP counter LINUX_MIB_TCPRETRANSFAIL is not counting the TSO/GSO properly on failed retransmission. This patch fixes that. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yuchung Cheng 提交于
[ Upstream commit 3976535af0cb9fe34a55f2ffb8d7e6b39a2f8188 ] Previously there is an off-by-one bug on determining when to abort a stalled window-probing socket. This patch fixes that so it is consistent with tcp_write_timeout(). Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Rob Herring 提交于
[ Upstream commit 7f4b001b7f6e0480b5bdab9cd8ce1711e43e5cb5 ] There's a bug in dtc in checking for duplicate node names when there's another section (e.g. "/ { };"). In this case, skeleton.dtsi provides another section. Upon removal of skeleton.dtsi, the dtb fails to build due to a duplicate node 'fixedregulator@0'. As both nodes were pretty much the same 3.3V fixed regulator, it hasn't really mattered. Fix this by renaming the nodes to something unique. In the process, drop the unit-address which shouldn't be present wtihout reg property. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Lubomir Rintel 提交于
[ Upstream commit 400583983f8a8e95ec02c9c9e2b50188753a87fb ] gpio-pxa uses two cell to encode the interrupt source: the pin number and the trigger type. Adjust the device node accordingly. Signed-off-by: NLubomir Rintel <lkundrak@v3.sk> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Eric Dumazet 提交于
[ Upstream commit 85bdf7db5b53cdcc7a901db12bcb3d0063e3866d ] Jean-Louis Dupond reported poor iscsi TCP receive performance that we tracked to backlog drops. Apparently we fail to send window updates reflecting the fact that we are under stress. Note that we might lack a proper window increase when backlog is fully processed, since __release_sock() clears sk->sk_backlog.len _after_ all skbs have been processed. This should not matter in practice. If we had a significant load through socket backlog, we are in a dangerous situation. Reported-by: NJean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Tested-by: Jean-Louis Dupond<jean-louis@dupond.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Rob Herring 提交于
[ Upstream commit 70523a3ce5ff928faa43bb2cad554dc63438e3e7 ] The updated version of dtc has a bug fix for simple_bus_reg warnings and lots of warnings are generated now. So disable this warning by default. Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Geert Uytterhoeven 提交于
[ Upstream commit 160bfa7c724b348a90a12dd9694f351927a15b8e ] The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) renamed the A3VIP power domain on R-Car V3H to A3VIP0, and clarified the power domain hierarchy for the A3VIP[012] power domains. As the definition for the A3VIP0 domain is not yet used from DT, it can just be renamed. Fixes: 7755b40d ("dt-bindings: power: add R8A77980 SYSC power domain definitions") Fixes: 41d6d8bd ("soc: renesas: rcar-sysc: add R8A77980 support") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Geert Uytterhoeven 提交于
[ Upstream commit 97473bc85b22ac610b1810b6a9a4669a6cb0b7b0 ] The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) renamed the A2PD0 and A2DP0 power domains on R-Car V3H to A2DP0 resp. A2DP1. As these definitions are not yet used from DT, they can just be renamed. Fixes: 7755b40d ("dt-bindings: power: add R8A77980 SYSC power domain definitions") Fixes: 41d6d8bd ("soc: renesas: rcar-sysc: add R8A77980 support") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Geert Uytterhoeven 提交于
[ Upstream commit b5eb730e031acaba2d25e8f522ac5966a70885ae ] The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) renamed the A2IR2 and A2IR3 power domains on R-Car V3M to A2DP resp. A2CN. As these definitions are not yet used from DT, they can just be renamed. While at it, fix the indentation of the A3IR definition. Fixes: 833bdb47 ("dt-bindings: power: add R8A77970 SYSC power domain definitions") Fixes: bab9b2a7 ("soc: renesas: rcar-sysc: add R8A77970 support") Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Stephen Boyd 提交于
[ Upstream commit 553604c041b8c18cd6a8e1d785a77f3e4be61cdb ] This function is called from driver probe, which isn't the same as __init code because driver probe can happen later. Drop the __init marking here to fix this potential problem. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Wenzhen Yu <wenzhen.yu@mediatek.com> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Fixes: 2fc0a509 ("clk: mediatek: add clock support for MT7622 SoC") Signed-off-by: NStephen Boyd <sboyd@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephen Boyd 提交于
commit 28f1186a26f7e4e5df7be454710da26c810effb6 upstream. This function is used from more places than just __init code. Removing __init silences a section mismatch warning here. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Wenzhen Yu <wenzhen.yu@mediatek.com> Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: NStephen Boyd <sboyd@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yonghong Song 提交于
[ Upstream commit b42699547fc9fb1057795bccc21a6445743a7fde ] During porting libbpf to bcc, I got some warnings like below: ... [ 2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0: warning: "_GNU_SOURCE" redefined [enabled by default] #define _GNU_SOURCE ... [ 3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’: /home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7: warning: assignment makes integer from pointer without a cast [enabled by default] ret = strerror_r(err, buf, size); ... bcc is built with _GNU_SOURCE defined and this caused the above warning. This patch intends to make libpf _GNU_SOURCE friendly by . define _GNU_SOURCE in libbpf.c unless it is not defined . undefine _GNU_SOURCE as non-gnu version of strerror_r is expected. Signed-off-by: NYonghong Song <yhs@fb.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-