Pull watchdog updates from Wim Van Sebroeck:
 - new driver for NXP LPC18xx Watchdog Timer
 - new driver for SAMA5D4 watchdog timer
 - add support for MCP79 to nv_tco driver
 - clean-up and improvement of the mpc8xxx watchdog driver
 - improvements to gpio-wdt
 - at91sam9_wdt clock improvements
 ... and other small fixes and improvements

* git://www.linux-watchdog.org/linux-watchdog: (25 commits)
  Watchdog: Fix parent of watchdog_devices
  watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errors
  watchdog: at91sam9: get and use slow clock
  Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver
  watchdog: add a driver to support SAMA5D4 watchdog timer
  watchdog: mpc8xxx: allow to compile for MPC512x
  watchdog: mpc8xxx: use better error code when watchdog cannot be enabled
  watchdog: mpc8xxx: use dynamic memory for device specific data
  watchdog: mpc8xxx: use devm_ioremap_resource to map memory
  watchdog: mpc8xxx: make use of of_device_get_match_data
  watchdog: mpc8xxx: simplify registration
  watchdog: mpc8xxx: remove dead code
  watchdog: lpc18xx_wdt_get_timeleft() can be static
  DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation
  watchdog: NXP LPC18xx Watchdog Timer Driver
  watchdog: gpio-wdt: ping already at startup for always running devices
  watchdog: gpio-wdt: be more strict about hw_algo matching
  Documentation: watchdog: at91sam9_wdt: add clocks property
  watchdog: booke_wdt: Use infrastructure to check timeout limits
  watchdog: (nv_tco) add support for MCP79
  ...

Pull btrfs cleanups and fixes from Chris Mason:
 "These are small cleanups, and also some fixes for our async worker
  thread initialization.

  I was having some trouble testing these, but it ended up being a
  combination of changing around my test servers and a shiny new
  schedule while atomic from the new start/finish_plug in
  writeback_sb_inodes().

  That one only hits on btrfs raid5/6 or MD raid10, and if I wasn't
  changing a bunch of things in my test setup at once it would have been
  really clear.  Fix for writeback_sb_inodes() on the way as well"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: cleanup: remove unnecessary check before btrfs_free_path is called
  btrfs: async_thread: Fix workqueue 'max_active' value when initializing
  btrfs: Add raid56 support for updating  num_tolerated_disk_barrier_failures in btrfs_balance
  btrfs: Cleanup for btrfs_calc_num_tolerated_disk_barrier_failures
  btrfs: Remove noused chunk_tree and chunk_objectid from scrub_enumerate_chunks and scrub_chunk
  btrfs: Update out-of-date "skip parity stripe" comment

Pull Ceph update from Sage Weil:
 "There are a few fixes for snapshot behavior with CephFS and support
  for the new keepalive protocol from Zheng, a libceph fix that affects
  both RBD and CephFS, a few bug fixes and cleanups for RBD from Ilya,
  and several small fixes and cleanups from Jianpeng and others"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: improve readahead for file holes
  ceph: get inode size for each append write
  libceph: check data_len in ->alloc_msg()
  libceph: use keepalive2 to verify the mon session is alive
  rbd: plug rbd_dev->header.object_prefix memory leak
  rbd: fix double free on rbd_dev->header_name
  libceph: set 'exists' flag for newly up osd
  ceph: cleanup use of ceph_msg_get
  ceph: no need to get parent inode in ceph_open
  ceph: remove the useless judgement
  ceph: remove redundant test of head->safe and silence static analysis warnings
  ceph: fix queuing inode to mdsdir's snaprealm
  libceph: rename con_work() to ceph_con_workfn()
  libceph: Avoid holding the zero page on ceph_msgr_slab_init errors
  libceph: remove the unused macro AES_KEY_SIZE
  ceph: invalidate dirty pages after forced umount
  ceph: EIO all operations after forced umount

Pull GFS2 updates from Bob Peterson:
 "Here is a list of patches we've accumulated for GFS2 for the current
  upstream merge window.  This time we've only got six patches, many of
  which are very small:

   - three cleanups from Andreas Gruenbacher, including a nice cleanup
     of the sequence file code for the sbstats debugfs file.

   - a patch from Ben Hutchings that changes statistics variables from
     signed to unsigned.

   - two patches from me that increase GFS2's glock scalability by
     switching from a conventional hash table to rhashtable"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: A minor "sbstats" cleanup
  gfs2: Fix a typo in a comment
  gfs2: Make statistics unsigned, suitable for use with do_div()
  GFS2: Use resizable hash table for glocks
  GFS2: Move glock superblock pointer to field gl_name
  gfs2: Simplify the seq file code for "sbstats"

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes since the last update: the HD-audio quirks
  as usual with a USB-audio fix and a trivial fix for the old sparc
  driver"

* tag 'sound-fix-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Change internal PCM order
  ALSA: hda - Fix white noise on Dell M3800
  ALSA: hda - Use ALC880_FIXUP_FUJITSU for FSC Amilo M1437
  ALSA: hda - Enable headphone jack detect on old Fujitsu laptops
  ALSA: sparc: amd7930: Fix module autoload for OF platform driver
  ALSA: hda - Add some FIXUP quirks for white noise on Dell laptop.

Pull drm fixes from Dave Airlie:
 "Just a bunch of fixes to squeeze in before -rc1:

   - three nouveau regression fixes

   - one qxl regression fix

   - a bunch of i915 fixes

  ... and some core displayport/atomic fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/device: enable c800 quirk for tecra w50
  drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x
  drm/nouveau/gr/nv04: fix big endian setting on gr context
  drm/qxl: validate monitors config modes
  drm/i915: Allow DSI dual link to be configured on any pipe
  drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS
  drm/i915: Fix CSR MMIO address check
  drm/i915: Limit the number of loops for reading a split 64bit register
  drm/i915: Fix broken mst get_hw_state.
  drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x
  uapi/drm/i915_drm.h: fix userspace compilation.
  drm/i915: Always mark the object as dirty when used by the GPU
  drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed
  drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed
  drm/dp: Define AUX_RETRY_INTERVAL as 500 us
  drm/atomic: Fix bookkeeping with TEST_ONLY, v3.

three nouveau regression fixes.
* 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/device: enable c800 quirk for tecra w50
  drm/nouveau/clk/gt215: Unbreak engine pausing for GT21x/MCP7x
  drm/nouveau/gr/nv04: fix big endian setting on gr context

Pull blk-cg updates from Jens Axboe:
 "A bit later in the cycle, but this has been in the block tree for a a
  while.  This is basically four patchsets from Tejun, that improve our
  buffered cgroup writeback.  It was dependent on the other cgroup
  changes, but they went in earlier in this cycle.

  Series 1 is set of 5 patches that has cgroup writeback updates:

   - bdi_writeback iteration fix which could lead to some wb's being
     skipped or repeated during e.g. sync under memory pressure.

   - Simplification of wb work wait mechanism.

   - Writeback tracepoints updated to report cgroup.

  Series 2 is is a set of updates for the CFQ cgroup writeback handling:

     cfq has always charged all async IOs to the root cgroup.  It didn't
     have much choice as writeback didn't know about cgroups and there
     was no way to tell who to blame for a given writeback IO.
     writeback finally grew support for cgroups and now tags each
     writeback IO with the appropriate cgroup to charge it against.

     This patchset updates cfq so that it follows the blkcg each bio is
     tagged with.  Async cfq_queues are now shared across cfq_group,
     which is per-cgroup, instead of per-request_queue cfq_data.  This
     makes all IOs follow the weight based IO resource distribution
     implemented by cfq.

     - Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff.

     - Other misc review points addressed, acks added and rebased.

  Series 3 is the blkcg policy cleanup patches:

     This patchset contains assorted cleanups for blkcg_policy methods
     and blk[c]g_policy_data handling.

     - alloc/free added for blkg_policy_data.  exit dropped.

     - alloc/free added for blkcg_policy_data.

     - blk-throttle's async percpu allocation is replaced with direct
       allocation.

     - all methods now take blk[c]g_policy_data instead of blkcg_gq or
       blkcg.

  And finally, series 4 is a set of patches cleaning up the blkcg stats
  handling:

    blkcg's stats have always been somwhat of a mess.  This patchset
    tries to improve the situation a bit.

     - The following patches added to consolidate blkcg entry point and
       blkg creation.  This is in itself is an improvement and helps
       colllecting common stats on bio issue.

     - per-blkg stats now accounted on bio issue rather than request
       completion so that bio based and request based drivers can behave
       the same way.  The issue was spotted by Vivek.

     - cfq-iosched implements custom recursive stats and blk-throttle
       implements custom per-cpu stats.  This patchset make blkcg core
       support both by default.

     - cfq-iosched and blk-throttle keep track of the same stats
       multiple times.  Unify them"

* 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits)
  blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy
  blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/
  blkcg: implement interface for the unified hierarchy
  blkcg: misc preparations for unified hierarchy interface
  blkcg: separate out tg_conf_updated() from tg_set_conf()
  blkcg: move body parsing from blkg_conf_prep() to its callers
  blkcg: mark existing cftypes as legacy
  blkcg: rename subsystem name from blkio to io
  blkcg: refine error codes returned during blkcg configuration
  blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device()
  blkcg: reduce stack usage of blkg_rwstat_recursive_sum()
  blkcg: remove cfqg_stats->sectors
  blkcg: move io_service_bytes and io_serviced stats into blkcg_gq
  blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq
  blkcg: make blkcg_[rw]stat per-cpu
  blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it
  blkcg: consolidate blkg creation in blkcg_bio_issue_check()
  blk-throttle: improve queue bypass handling
  blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup()
  blkcg: inline [__]blkg_lookup()
  ...

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Typo that snuck in with commit 6979c630Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Reported-by: NPierre Moreau <pierre.morrow@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Broken since "gr: convert user classes to new-style nvkm_object"

Tested on a PPC64 G5 + NV34
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Merge third patch-bomb from Andrew Morton:

 - even more of the rest of MM

 - lib/ updates

 - checkpatch updates

 - small changes to a few scruffy filesystems

 - kmod fixes/cleanups

 - kexec updates

 - a dma-mapping cleanup series from hch

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits)
  dma-mapping: consolidate dma_set_mask
  dma-mapping: consolidate dma_supported
  dma-mapping: cosolidate dma_mapping_error
  dma-mapping: consolidate dma_{alloc,free}_noncoherent
  dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}
  mm: use vma_is_anonymous() in create_huge_pmd() and wp_huge_pmd()
  mm: make sure all file VMAs have ->vm_ops set
  mm, mpx: add "vm_flags_t vm_flags" arg to do_mmap_pgoff()
  mm: mark most vm_operations_struct const
  namei: fix warning while make xmldocs caused by namei.c
  ipc: convert invalid scenarios to use WARN_ON
  zlib_deflate/deftree: remove bi_reverse()
  lib/decompress_unlzma: Do a NULL check for pointer
  lib/decompressors: use real out buf size for gunzip with kernel
  fs/affs: make root lookup from blkdev logical size
  sysctl: fix int -> unsigned long assignments in INT_MIN case
  kexec: export KERNEL_IMAGE_SIZE to vmcoreinfo
  kexec: align crash_notes allocation to make it be inside one physical page
  kexec: remove unnecessary test in kimage_alloc_crash_control_pages()
  kexec: split kexec_load syscall from kexec core code
  ...

Pull late ARM SoC updates from Kevin Hilman:
 "This is a collection of a few late fixes and other misc stuff that had
  dependencies on things being merged from other trees.

  The bulk of the changes are for samsung/exynos SoCs for some changes
  that needed a few minor reworks so ended up a bit late.  The others
  are mainly for qcom SoCs: a couple fixes and some DTS updates"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  ARM: multi_v7_defconfig: Enable PBIAS regulator
  soc: qcom: smd: Correct fBLOCKREADINTR handling
  soc: qcom: smd: Use correct remote processor ID
  soc: qcom: smem: Fix errant private access
  ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
  ARM: dts: qcom: msm8960-cdp: Use stdout-path
  ARM: dts: qcom: msm8660-surf: Use stdout-path
  ARM: dts: qcom: ipq8064-ap148: Use stdout-path
  ARM: dts: qcom: apq8084-mtp: Use stdout-path
  ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
  ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
  ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
  ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
  ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
  reset: ath79: Fix missing spin_lock_init
  reset: Add (devm_)reset_control_get stub functions
  ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
  cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
  ARM: dts: add iommu property to JPEG device for exynos4
  ARM: dts: enable SPI1 for exynos4412-odroidu3
  ...

bunch of drm fixes.

* tag 'topic/drm-fixes-2015-09-09' of git://anongit.freedesktop.org/drm-intel:
  drm/dp: Add dp_aux_i2c_speed_khz module param to set the assume i2c bus speed
  drm/dp: Adjust i2c-over-aux retry count based on message size and i2c bus speed
  drm/dp: Define AUX_RETRY_INTERVAL as 500 us
  drm/atomic: Fix bookkeeping with TEST_ONLY, v3.

Merge tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel into drm-next

Fixes headed for v4.3-rc1, including Maarten's DP MST state checker fix
you requested.

* tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Allow DSI dual link to be configured on any pipe
  drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS
  drm/i915: Fix CSR MMIO address check
  drm/i915: Limit the number of loops for reading a split 64bit register
  drm/i915: Fix broken mst get_hw_state.
  drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x
  uapi/drm/i915_drm.h: fix userspace compilation.
  drm/i915: Always mark the object as dirty when used by the GPU

Due to some recent changes in
drm_helper_probe_single_connector_modes_merge_bits(), old custom modes
were not being pruned properly. In current kernels,
drm_mode_validate_basic() is called to sanity-check each mode in the
list. If the sanity-check passes, the mode's status gets set to to
MODE_OK. In older kernels this check was not done, so old custom modes
would still have a status of MODE_UNVERIFIED at this point, and would
therefore be pruned later in the function.

As a result of this new behavior, the list of modes for a device always
includes every custom mode ever configured for the device, with the
largest one listed first. Since desktop environments usually choose the
first preferred mode when a hotplug event is emitted, this had the
result of making it very difficult for the user to reduce the size of
the display.

The qxl driver did implement the mode_valid connector function, but it
was empty. In order to restore the old behavior where old custom modes
are pruned, we implement a proper mode_valid function for the qxl
driver. This function now checks each mode against the last configured
custom mode and the list of standard modes. If the mode doesn't match
any of these, its status is set to MODE_BAD so that it will be pruned as
expected.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pull more kvm updates from Paolo Bonzini:
 "ARM:
   - Full debug support for arm64
   - Active state switching for timer interrupts
   - Lazy FP/SIMD save/restore for arm64
   - Generic ARMv8 target

  PPC:
   - Book3S: A few bug fixes
   - Book3S: Allow micro-threading on POWER8

  x86:
   - Compiler warnings

  Generic:
   - Adaptive polling for guest halt"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits)
  kvm: irqchip: fix memory leak
  kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PF
  KVM: trace kvm_halt_poll_ns grow/shrink
  KVM: dynamic halt-polling
  KVM: make halt_poll_ns per-vCPU
  Silence compiler warning in arch/x86/kvm/emulate.c
  kvm: compile process_smi_save_seg_64() only for x86_64
  KVM: x86: avoid uninitialized variable warning
  KVM: PPC: Book3S: Fix typo in top comment about locking
  KVM: PPC: Book3S: Fix size of the PSPB register
  KVM: PPC: Book3S HV: Exit on H_DOORBELL if HOST_IPI is set
  KVM: PPC: Book3S HV: Fix race in starting secondary threads
  KVM: PPC: Book3S: correct width in XER handling
  KVM: PPC: Book3S HV: Fix preempted vcore stolen time calculation
  KVM: PPC: Book3S HV: Fix preempted vcore list locking
  KVM: PPC: Book3S HV: Implement H_CLEAR_REF and H_CLEAR_MOD
  KVM: PPC: Book3S HV: Fix bug in dirty page tracking
  KVM: PPC: Book3S HV: Fix race in reading change bit when removing HPTE
  KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8
  KVM: PPC: Book3S HV: Make use of unused threads when running guests
  ...

Pull xen terminology fixes from David Vrabel:
 "Use the correct GFN/BFN terms more consistently"

* tag 'for-linus-4.3-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: Rename the variable xen_store_mfn to xen_store_gfn
  xen/privcmd: Further s/MFN/GFN/ clean-up
  hvc/xen: Further s/MFN/GFN clean-up
  video/xen-fbfront: Further s/MFN/GFN clean-up
  xen/tmem: Use xen_page_to_gfn rather than pfn_to_gfn
  xen: Use correctly the Xen memory terminologies
  arm/xen: implement correctly pfn_to_mfn
  xen: Make clear that swiotlb and biomerge are dealing with DMA address

Pull microblaze update from Michal Simek.

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  elf-em.h: move EM_MICROBLAZE to the common header

Pull hexagon updates from Richard Kuo:
 "Just two fixes -- one for a uapi header and one for a timer interface"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  Revert "Hexagon: fix signal.c compile error"
  hexagon/time: Migrate to new 'set-state' interface

Pull networking fixes from David Miller:

 1) Fix out-of-bounds array access in netfilter ipset, from Jozsef
    Kadlecsik.

 2) Use correct free operation on netfilter conntrack templates, from
    Daniel Borkmann.

 3) Fix route leak in SCTP, from Marcelo Ricardo Leitner.

 4) Fix sizeof(pointer) in mac80211, from Thierry Reding.

 5) Fix cache pointer comparison in ip6mr leading to missed unlock of
    mrt_lock.  From Richard Laing.

 6) rds_conn_lookup() needs to consider network namespace in key
    comparison, from Sowmini Varadhan.

 7) Fix deadlock in TIPC code wrt broadcast link wakeups, from Kolmakov
    Dmitriy.

 8) Fix fd leaks in bpf syscall, from Daniel Borkmann.

 9) Fix error recovery when installing ipv6 multipath routes, we would
    delete the old route before we would know if we could fully commit
    to the new set of nexthops.  Fix from Roopa Prabhu.

10) Fix run-time suspend problems in r8152, from Hayes Wang.

11) In fec, don't program the MAC address into the chip when the clocks
    are gated off.  From Fugang Duan.

12) Fix poll behavior for netlink sockets when using rx ring mmap, from
    Daniel Borkmann.

13) Don't allocate memory with GFP_KERNEL from get_stats64 in r8169
    driver, from Corinna Vinschen.

14) In TCP Cubic congestion control, handle idle periods better where we
    are application limited, in order to keep cwnd from growing out of
    control.  From Eric Dumzet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  tcp_cubic: better follow cubic curve after idle period
  tcp: generate CA_EVENT_TX_START on data frames
  xen-netfront: respect user provided max_queues
  xen-netback: respect user provided max_queues
  r8169: Fix sleeping function called during get_stats64, v2
  ether: add IEEE 1722 ethertype - TSN
  netlink, mmap: fix edge-case leakages in nf queue zero-copy
  netlink, mmap: don't walk rx ring on poll if receive queue non-empty
  cxgb4: changes for new firmware 1.14.4.0
  net: fec: add netif status check before set mac address
  r8152: fix the runtime suspend issues
  r8152: split DRIVER_VERSION
  ipv6: fix ifnullfree.cocci warnings
  add microchip LAN88xx phy driver
  stmmac: fix check for phydev being open
  net: qlcnic: delete redundant memsets
  net: mv643xx_eth: use kzalloc
  net: jme: use kzalloc() instead of kmalloc+memset
  net: cavium: liquidio: use kzalloc in setup_glist()
  net: ipv6: use common fib_default_rule_pref
  ...

Almost everyone implements dma_set_mask the same way, although some time
that's hidden in ->set_dma_mask methods.

This patch consolidates those into a common implementation that either
calls ->set_dma_mask if present or otherwise uses the default
implementation.  Some architectures used to only call ->set_dma_mask
after the initial checks, and those instance have been fixed to do the
full work.  h8300 implemented dma_set_mask bogusly as a no-ops and has
been fixed.

Unfortunately some architectures overload unrelated semantics like changing
the dma_ops into it so we still need to allow for an architecture override
for now.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most architectures just call into ->dma_supported, but some also return 1
if the method is not present, or 0 if no dma ops are present (although
that should never happeb). Consolidate this more broad version into
common code.

Also fix h8300 which inorrectly always returned 0, which would have been
a problem if it's dma_set_mask implementation wasn't a similarly buggy
noop.

As a few architectures have much more elaborate implementations, we
still allow for arch overrides.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently there are three valid implementations of dma_mapping_error:

 (1) call ->mapping_error
 (2) check for a hardcoded error code
 (3) always return 0

This patch provides a common implementation that calls ->mapping_error
if present, then checks for DMA_ERROR_CODE if defined or otherwise
returns 0.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most architectures do not support non-coherent allocations and either
define dma_{alloc,free}_noncoherent to their coherent versions or stub
them out.

Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips
implements them directly.

This patch moves the Openrisc version to common code, and handles the
DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance.

Note that actual non-coherent allocations require a dma_cache_sync
implementation, so if non-coherent allocations didn't work on
an architecture before this patch they still won't work after it.

[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since 2009 we have a nice asm-generic header implementing lots of DMA API
functions for architectures using struct dma_map_ops, but unfortunately
it's still missing a lot of APIs that all architectures still have to
duplicate.

This series consolidates the remaining functions, although we still need
arch opt outs for two of them as a few architectures have very
non-standard implementations.

This patch (of 5):

The coherent DMA allocator works the same over all architectures supporting
dma_map operations.

This patch consolidates them and converges the minor differences:

 - the debug_dma helpers are now called from all architectures, including
   those that were previously missing them
 - dma_alloc_from_coherent and dma_release_from_coherent are now always
   called from the generic alloc/free routines instead of the ops
   dma-mapping-common.h always includes dma-coherent.h to get the defintions
   for them, or the stubs if the architecture doesn't support this feature
 - checks for ->alloc / ->free presence are removed.  There is only one
   magic instead of dma_map_ops without them (mic_dma_ops) and that one
   is x86 only anyway.

Besides that only x86 needs special treatment to replace a default devices
if none is passed and tweak the gfp_flags.  An optional arch hook is provided
for that.

[linux@roeck-us.net: fix build]
[jcmvbkbc@gmail.com: fix xtensa]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let's use helper rather than direct check of vma->vm_ops to distinguish
anonymous VMA.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We rely on vma->vm_ops == NULL to detect anonymous VMA: see
vma_is_anonymous(), but some drivers doesn't set ->vm_ops.

As a result we can end up with anonymous page in private file mapping.
That should not lead to serious misbehaviour, but nevertheless is wrong.

Let's fix by setting up dummy ->vm_ops for file mmapping if f_op->mmap()
didn't set its own.

The patch also adds sanity check into __vma_link_rb(). It will help
catch broken VMAs which inserted directly into mm_struct via
insert_vm_struct().
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the additional "vm_flags_t vm_flags" argument to do_mmap_pgoff(),
rename it to do_mmap(), and re-introduce do_mmap_pgoff() as a simple
wrapper on top of do_mmap().  Perhaps we should update the callers of
do_mmap_pgoff() and kill it later.

This way mpx_mmap() can simply call do_mmap(vm_flags => VM_MPX) and do not
play with vm internals.

After this change mmap_region() has a single user outside of mmap.c,
arch/tile/mm/elf.c:arch_setup_additional_pages().  It would be nice to
change arch/tile/ and unexport mmap_region().

[kirill@shutemov.name: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NDave Hansen <dave.hansen@linux.intel.com>
Tested-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct
structs should be constant.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following warnings:

Warning(.//fs/namei.c:2422): No description found for parameter 'nd'
Warning(.//fs/namei.c:2422): Excess function parameter 'nameidata'
description in 'path_mountpoint'
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Considering Linus' past rants about the (ab)use of BUG in the kernel, I
took a look at how we deal with such calls in ipc.  Given that any errors
or corruption in ipc code are most likely contained within the set of
processes participating in the broken mechanisms, there aren't really many
strong fatal system failure scenarios that would require a BUG call.
Also, if something is seriously wrong, ipc might not be the place for such
a BUG either.

1. For example, recently, a customer hit one of these BUG_ONs in shm
   after failing shm_lock().  A busted ID imho does not merit a BUG_ON,
   and WARN would have been better.

2. MSG_COPY functionality of posix msgrcv(2) for checkpoint/restore.
   I don't see how we can hit this anyway -- at least it should be IS_ERR.
    The 'copy' arg from do_msgrcv is always set by calling prepare_copy()
   first and foremost.  We could also probably drop this check altogether.
    Either way, it does not merit a BUG_ON.

3. No ->fault() callback for the fs getting the corresponding page --
   seems selfish to make the system unusable.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove bi_reverse() and use generic bitrev32() instead - it should have
better performance on some platforms.
Signed-off-by: Nyalin wang <yalin.wang2010@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Compare pointer-typed values to NULL rather than 0.

The semantic patch that makes this change is available
in scripts/coccinelle/null/badzero.cocci.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When loading x86 64bit kernel above 4GiB with patched grub2, got kernel
gunzip error.

| early console in decompress_kernel
| decompress_kernel:
|       input: [0x807f2143b4-0x807ff61aee]
|      output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len
| boot via startup_64
| KASLR using RDTSC...
|  new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size
|  decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee]
|
| Decompressing Linux... gz...
|
| uncompression error
|
| -- System halted

the new buffer is at 0x46fe000000ULL, decompressor_gzip is using
0xffffffb901ffffff as out_len.  gunzip in lib/zlib_inflate/inflate.c cap
that len to 0x01ffffff and decompress fails later.

We could hit this problem with crashkernel booting that uses kexec loading
kernel above 4GiB.

We have decompress_* support:
    1. inbuf[]/outbuf[] for kernel preboot.
    2. inbuf[]/flush() for initramfs
    3. fill()/flush() for initrd.
This bug only affect kernel preboot path that use outbuf[].

Add __decompress and take real out_buf_len for gunzip instead of guessing
wrong buf size.

Fixes: 1431574a (lib/decompressors: fix "no limit" output buffer length)
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch resolves https://bugzilla.kernel.org/show_bug.cgi?id=16531.

When logical blkdev size > 512 then sector numbers become larger than the
device can support.

Make affs start lookup based on the device's logical sector size instead
of 512.
Reported-by: NMark <markk@clara.co.uk>
Suggested-by: NMark <markk@clara.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following

    if (val < 0)
        *lvalp = (unsigned long)-val;

is incorrect because the compiler is free to assume -val to be positive
and use a sign-extend instruction for extending the bit pattern.  This is
a problem if val == INT_MIN:

    # echo -2147483648 >/proc/sys/dev/scsi/logging_level
    # cat /proc/sys/dev/scsi/logging_level
    -18446744071562067968

Cast to unsigned long before negation - that way we first sign-extend and
then negate an unsigned, which is well defined.  With this:

    # cat /proc/sys/dev/scsi/logging_level
    -2147483648
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Cc: Mikulas Patocka <mikulas@twibright.com>
Cc: Robert Xiao <nneonneo@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In x86_64, since v2.6.26 the KERNEL_IMAGE_SIZE is changed to 512M, and
accordingly the MODULES_VADDR is changed to 0xffffffffa0000000.  However,
in v3.12 Kees Cook introduced kaslr to randomise the location of kernel.
And the kernel text mapping addr space is enlarged from 512M to 1G.  That
means now KERNEL_IMAGE_SIZE is variable, its value is 512M when kaslr
support is not compiled in and 1G when kaslr support is compiled in.
Accordingly the MODULES_VADDR is changed too to be:

    #define MODULES_VADDR    (__START_KERNEL_map + KERNEL_IMAGE_SIZE)

So when kaslr is compiled in and enabled, the kernel text mapping addr
space and modules vaddr space need be adjusted.  Otherwise makedumpfile
will collapse since the addr for some symbols is not correct.

Hence KERNEL_IMAGE_SIZE need be exported to vmcoreinfo and got in
makedumpfile to help calculate MODULES_VADDR.
Signed-off-by: NBaoquan He <bhe@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

People reported that crash_notes in /proc/vmcore were corrupted and this
cause crash kdump failure.  With code debugging and log we got the root
cause.  This is because percpu variable crash_notes are allocated in 2
vmalloc pages.  Currently percpu is based on vmalloc by default.  Vmalloc
can't guarantee 2 continuous vmalloc pages are also on 2 continuous
physical pages.  So when 1st kernel exports the starting address and size
of crash_notes through sysfs like below:

/sys/devices/system/cpu/cpux/crash_notes
/sys/devices/system/cpu/cpux/crash_notes_size

kdump kernel use them to get the content of crash_notes.  However the 2nd
part may not be in the next neighbouring physical page as we expected if
crash_notes are allocated accross 2 vmalloc pages.  That's why
nhdr_ptr->n_namesz or nhdr_ptr->n_descsz could be very huge in
update_note_header_size_elf64() and cause note header merging failure or
some warnings.

In this patch change to call __alloc_percpu() to passed in the align value
by rounding crash_notes_size up to the nearest power of two.  This makes
sure the crash_notes is allocated inside one physical page since
sizeof(note_buf_t) in all ARCHS is smaller than PAGE_SIZE.  Meanwhile add
a BUILD_BUG_ON to break compile if size is bigger than PAGE_SIZE since
crash_notes definitely will be in 2 pages.  That need be avoided, and need
be reported if it's unavoidable.

[akpm@linux-foundation.org: use correct comment layout]
Signed-off-by: NBaoquan He <bhe@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Transforming PFN(Page Frame Number) to struct page is never failure, so we
can simplify the code logic to do the image->control_page assignment
directly in the loop, and remove the unnecessary conditional judgement.
Signed-off-by: NMinfei Huang <mnfhuang@gmail.com>
Acked-by: NDave Young <dyoung@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>