Merge tag 'drm-intel-next-fixes-2015-09-10' of...

Merge tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel into drm-next

Fixes headed for v4.3-rc1, including Maarten's DP MST state checker fix
you requested.

* tag 'drm-intel-next-fixes-2015-09-10' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Allow DSI dual link to be configured on any pipe
  drm/i915: Don't try to use DDR DVFS on CHV when disabled in the BIOS
  drm/i915: Fix CSR MMIO address check
  drm/i915: Limit the number of loops for reading a split 64bit register
  drm/i915: Fix broken mst get_hw_state.
  drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x
  uapi/drm/i915_drm.h: fix userspace compilation.
  drm/i915: Always mark the object as dirty when used by the GPU

drivers/gpu/drm/i915/i915_drv.h

@@ -1928,6 +1928,8 @@ struct drm_i915_private {
 			struct skl_wm_values skl_hw;
 			struct vlv_wm_values vlv;
 		};
+
+		uint8_t max_level;
 	} wm;
 
 	struct i915_runtime_pm pm;
@@ -3383,13 +3385,13 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
 #define I915_READ64(reg)	dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true)
 
 #define I915_READ64_2x32(lower_reg, upper_reg) ({			\
-	u32 upper, lower, tmp;						\
-	tmp = I915_READ(upper_reg);					\
+	u32 upper, lower, old_upper, loop = 0;				\
+	upper = I915_READ(upper_reg);					\
 	do {								\
-		upper = tmp;						\
+		old_upper = upper;					\
 		lower = I915_READ(lower_reg);				\
-		tmp = I915_READ(upper_reg);				\
-	} while (upper != tmp);						\
+		upper = I915_READ(upper_reg);				\
+	} while (upper != old_upper && loop++ < 2);			\
 	(u64)upper << 32 | lower; })
 
 #define POSTING_READ(reg)	(void)I915_READ_NOTRACE(reg)

drivers/gpu/drm/i915/i915_gem_execbuffer.c

@@ -1032,6 +1032,7 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
 		u32 old_read = obj->base.read_domains;
 		u32 old_write = obj->base.write_domain;
 
+		obj->dirty = 1; /* be paranoid  */
 		obj->base.write_domain = obj->base.pending_write_domain;
 		if (obj->base.write_domain == 0)
 			obj->base.pending_read_domains |= obj->base.read_domains;
@@ -1039,7 +1040,6 @@ i915_gem_execbuffer_move_to_active(struct list_head *vmas,
 
 		i915_vma_move_to_active(vma, req);
 		if (obj->base.write_domain) {
-			obj->dirty = 1;
 			i915_gem_request_assign(&obj->last_write_req, req);
 
 			intel_fb_obj_invalidate(obj, ORIGIN_CS);

drivers/gpu/drm/i915/i915_irq.c

@@ -1558,7 +1558,7 @@ static void i9xx_hpd_irq_handler(struct drm_device *dev)
 		u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
 
 		intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
-				   hotplug_trigger, hpd_status_g4x,
+				   hotplug_trigger, hpd_status_i915,
 				   i9xx_port_hotplug_long_detect);
 		intel_hpd_irq_handler(dev, pin_mask, long_mask);
 	}

drivers/gpu/drm/i915/intel_csr.c

@@ -350,7 +350,7 @@ static void finish_csr_load(const struct firmware *fw, void *context)
 	}
 	csr->mmio_count = dmc_header->mmio_count;
 	for (i = 0; i < dmc_header->mmio_count; i++) {
-		if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE &&
+		if (dmc_header->mmioaddr[i] < CSR_MMIO_START_RANGE ||
 			dmc_header->mmioaddr[i] > CSR_MMIO_END_RANGE) {
 			DRM_ERROR(" Firmware has wrong mmio address 0x%x\n",
 						dmc_header->mmioaddr[i]);

drivers/gpu/drm/i915/intel_display.c

@@ -6305,7 +6305,7 @@ static void intel_connector_check_state(struct intel_connector *connector)
 		      connector->base.name);
 
 	if (connector->get_hw_state(connector)) {
-		struct drm_encoder *encoder = &connector->encoder->base;
+		struct intel_encoder *encoder = connector->encoder;
 		struct drm_connector_state *conn_state = connector->base.state;
 
 		I915_STATE_WARN(!crtc,
@@ -6317,13 +6317,13 @@ static void intel_connector_check_state(struct intel_connector *connector)
 		I915_STATE_WARN(!crtc->state->active,
 		      "connector is active, but attached crtc isn't\n");
 
-		if (!encoder)
+		if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
 			return;
 
-		I915_STATE_WARN(conn_state->best_encoder != encoder,
+		I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
 			"atomic encoder doesn't match attached encoder\n");
 
-		I915_STATE_WARN(conn_state->crtc != encoder->crtc,
+		I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
 			"attached encoder crtc differs from connector crtc\n");
 	} else {
 		I915_STATE_WARN(crtc && crtc->state->active,

drivers/gpu/drm/i915/intel_dp_mst.c

@@ -173,6 +173,11 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder)
 		return;
 	}
 
+	/* MST encoders are bound to a crtc, not to a connector,
+	 * force the mapping here for get_hw_state.
+	 */
+	found->encoder = encoder;
+
 	DRM_DEBUG_KMS("%d\n", intel_dp->active_mst_links);
 	intel_mst->port = found->port;
 
@@ -400,7 +405,7 @@ static const struct drm_encoder_funcs intel_dp_mst_enc_funcs = {
 
 static bool intel_dp_mst_get_hw_state(struct intel_connector *connector)
 {
-	if (connector->encoder) {
+	if (connector->encoder && connector->base.state->crtc) {
 		enum pipe pipe;
 		if (!connector->encoder->get_hw_state(connector->encoder, &pipe))
 			return false;

drivers/gpu/drm/i915/intel_dsi.c

@@ -1048,11 +1048,7 @@ void intel_dsi_init(struct drm_device *dev)
 	intel_connector->unregister = intel_connector_unregister;
 
 	/* Pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI port C */
-	if (dev_priv->vbt.dsi.config->dual_link) {
-		/* XXX: does dual link work on either pipe? */
-		intel_encoder->crtc_mask = (1 << PIPE_A);
-		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
-	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
+	if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA) {
 		intel_encoder->crtc_mask = (1 << PIPE_A);
 		intel_dsi->ports = (1 << PORT_A);
 	} else if (dev_priv->vbt.dsi.port == DVO_PORT_MIPIC) {
@@ -1060,6 +1056,9 @@ void intel_dsi_init(struct drm_device *dev)
 		intel_dsi->ports = (1 << PORT_C);
 	}
 
+	if (dev_priv->vbt.dsi.config->dual_link)
+		intel_dsi->ports = ((1 << PORT_A) | (1 << PORT_C));
+
 	/* Create a DSI host (and a device) for each port. */
 	for_each_dsi_port(port, intel_dsi->ports) {
 		struct intel_dsi_host *host;

drivers/gpu/drm/i915/intel_pm.c

@@ -955,8 +955,6 @@ enum vlv_wm_level {
 	VLV_WM_LEVEL_PM2,
 	VLV_WM_LEVEL_PM5,
 	VLV_WM_LEVEL_DDR_DVFS,
-	CHV_WM_NUM_LEVELS,
-	VLV_WM_NUM_LEVELS = 1,
 };
 
 /* latency must be in 0.1us units. */
@@ -982,9 +980,13 @@ static void vlv_setup_wm_latency(struct drm_device *dev)
 	/* all latencies in usec */
 	dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM2] = 3;
 
+	dev_priv->wm.max_level = VLV_WM_LEVEL_PM2;
+
 	if (IS_CHERRYVIEW(dev_priv)) {
 		dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM5] = 12;
 		dev_priv->wm.pri_latency[VLV_WM_LEVEL_DDR_DVFS] = 33;
+
+		dev_priv->wm.max_level = VLV_WM_LEVEL_DDR_DVFS;
 	}
 }
 
@@ -1137,10 +1139,7 @@ static void vlv_compute_wm(struct intel_crtc *crtc)
 	memset(wm_state, 0, sizeof(*wm_state));
 
 	wm_state->cxsr = crtc->pipe != PIPE_C && crtc->wm.cxsr_allowed;
-	if (IS_CHERRYVIEW(dev))
-		wm_state->num_levels = CHV_WM_NUM_LEVELS;
-	else
-		wm_state->num_levels = VLV_WM_NUM_LEVELS;
+	wm_state->num_levels = to_i915(dev)->wm.max_level + 1;
 
 	wm_state->num_active_planes = 0;
 
@@ -1220,7 +1219,7 @@ static void vlv_compute_wm(struct intel_crtc *crtc)
 	}
 
 	/* clear any (partially) filled invalid levels */
-	for (level = wm_state->num_levels; level < CHV_WM_NUM_LEVELS; level++) {
+	for (level = wm_state->num_levels; level < to_i915(dev)->wm.max_level + 1; level++) {
 		memset(&wm_state->wm[level], 0, sizeof(wm_state->wm[level]));
 		memset(&wm_state->sr[level], 0, sizeof(wm_state->sr[level]));
 	}
@@ -1324,10 +1323,7 @@ static void vlv_merge_wm(struct drm_device *dev,
 	struct intel_crtc *crtc;
 	int num_active_crtcs = 0;
 
-	if (IS_CHERRYVIEW(dev))
-		wm->level = VLV_WM_LEVEL_DDR_DVFS;
-	else
-		wm->level = VLV_WM_LEVEL_PM2;
+	wm->level = to_i915(dev)->wm.max_level;
 	wm->cxsr = true;
 
 	for_each_intel_crtc(dev, crtc) {
@@ -4083,9 +4079,29 @@ void vlv_wm_get_hw_state(struct drm_device *dev)
 		if (val & DSP_MAXFIFO_PM5_ENABLE)
 			wm->level = VLV_WM_LEVEL_PM5;
 
+		/*
+		 * If DDR DVFS is disabled in the BIOS, Punit
+		 * will never ack the request. So if that happens
+		 * assume we don't have to enable/disable DDR DVFS
+		 * dynamically. To test that just set the REQ_ACK
+		 * bit to poke the Punit, but don't change the
+		 * HIGH/LOW bits so that we don't actually change
+		 * the current state.
+		 */
 		val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
-		if ((val & FORCE_DDR_HIGH_FREQ) == 0)
-			wm->level = VLV_WM_LEVEL_DDR_DVFS;
+		val |= FORCE_DDR_FREQ_REQ_ACK;
+		vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
+
+		if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
+			      FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) {
+			DRM_DEBUG_KMS("Punit not acking DDR DVFS request, "
+				      "assuming DDR DVFS is disabled\n");
+			dev_priv->wm.max_level = VLV_WM_LEVEL_PM5;
+		} else {
+			val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
+			if ((val & FORCE_DDR_HIGH_FREQ) == 0)
+				wm->level = VLV_WM_LEVEL_DDR_DVFS;
+		}
 
 		mutex_unlock(&dev_priv->rps.hw_lock);
 	}

include/uapi/drm/i915_drm.h

@@ -358,7 +358,7 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_RESOURCE_STREAMER 36
 
 typedef struct drm_i915_getparam {
-	s32 param;
+	__s32 param;
 	/*
 	 * WARNING: Using pointers instead of fixed-size u64 means we need to write
 	 * compat32 code. Don't repeat this mistake.