Initial revision of device tree for AMD Seattle Development platform.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: NThomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: NJoel Schopp <Joel.Schopp@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This adds support for ARM's Juno development board (rev 0).
It enables most of the board peripherals: UART, I2C, USB, MMC and
100Mb ethernet. There is no support at the moment for clock setting
and HDLCD driver which depends on it.
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

DT files used in the compilation phase can be preprocessed by the C
preprocessor. This requires an include/dt-bindings directory to be
present in the arch/arm64/boot/dts directory.
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch enables CLCD support for the VE platform emulated by the
ARMv8 software model (DT bindings are based on Pawel's vexpress
patches) together with defconfig entries for SERIO_AMBAKMI and
FB_ARMCLCD.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPawel Moll <pawel.moll@arm.com>

Moving dts files to vendor subdirs.
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRobert Richter <rrichter@cavium.com>

This patch adds support of vendor sub directories for dtb files.
Subdirectories can be specified in $(dts-dirs). Kbuild traverses over
all directories while building and installing dtb files. The directory
tree is also reflected in the install path.
Tested-by: NAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: NRobert Richter <rrichter@cavium.com>

Add dtb files to build targets and let kbuild handle them. Thus,
special dtbs rules can be removed. This eases Makefiles and the
implementation of the support of vendor dtb subdirectories.
Signed-off-by: NRobert Richter <rrichter@cavium.com>

Move dtbs install rules to Makefile.dtbinst. This change is needed to
implement support for dts vendor subdirs. The change makes Makefiles
easier and smaller as no longer the dtbs_install rule needs to be
defined. Another advantage is that install goals are not encoded in
targets anymore (%.dtb_dtbinst_).
Signed-off-by: NRobert Richter <rrichter@cavium.com>

This adds the dtbs_install make target to arm64. The target has been
introduced already to arch/arm with the following commit:

 f4d4ffc0 kbuild: dtbs_install: new make target

Implementation for arm64 is the same as for arm.

With 'dtbs_install' all config enabled dtb files are installed to
either the INSTALL_DTBS_PATH directory or the default location:

 $INSTALL_PATH/dtbs/$KERNELRELEASE
Signed-off-by: NRobert Richter <rrichter@cavium.com>

Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added 10GbE interface and clock nodes.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the device tree nodes for APM X-Gene PCIe host controller and PCIe
clock interface.  Since X-Gene SOC supports maximum 5 ports, 5 dts nodes
are added.
Signed-off-by: NTanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This introduces ARCH_THUNDER to enable soc specific drivers and dtb
files.
Signed-off-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com>
Signed-off-by: NRobert Richter <rrichter@cavium.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add initial device tree nodes for Cavium Thunder SoCs with support of
48 cores and gicv3. The dtsi file requires further changes, esp. for
pci, gicv3-its and smmu. This changes will be added later together
with the device drivers.
Signed-off-by: NRadha Mohan Chintakuntla <rchintakuntla@cavium.com>
Signed-off-by: NRobert Richter <rrichter@cavium.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This adds random number generator dts node to APM X-Gene platform.
Signed-off-by: NFeng Kan <fkan@apm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds bindings for APM X-Gene SoC ethernet driver.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NRavi Patel <rapatel@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

APM X-Gene Storm SoC supports 4 serial ports. This patch adds device nodes
for serial ports 1 to 3 (a device node for serial port 0 is already present
in the dts file).
This patch also sets the compatible property of serial nodes to "ns16550a".
Signed-off-by: NVinayak Kale <vkale@apm.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds APM X-Gene SoC RTC DTS entry
Signed-off-by: NRameshwar Prasad Sahu <rsahu@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Components of the Versatile Express platform (configuration
microcontrollers on motherboard and daughterboards in particular)
talk to each other over a custom configuration bus. They
provide miscellaneous functions (from clock generator control
to energy sensors) which are represented as platform devices
(and Device Tree nodes). The transactions on the bus can
be generated by different "bridges" in the system, some
of which are universal for the whole platform (for the price
of high transfer latencies), others restricted to a subsystem
(but much faster).

Until now drivers for such functions were using custom "func"
API, which is being replaced in this patch by regmap calls.
This required:

* a rework (and move to drivers/bus directory, as suggested
  by Samuel and Arnd) of the config bus core, which is much
  simpler now and uses device model infrastructure (class)
  to keep track of the bridges; non-DT case (soon to be
  retired anyway) is simply covered by a special device
  registration function

* the new config-bus driver also takes over device population,
  so there is no need for special matching table for
  of_platform_populate nor "simple-bus" hack in the arm64
  model dtsi file (relevant bindings documentation has
  been updated); this allows all the vexpress devices
  fit into normal device model, making it possible
  to remove plenty of early inits and other hacks in
  the near future

* adaptation of the syscfg bridge implementation in the
  sysreg driver, again making it much simpler; there is
  a special case of the "energy" function spanning two
  registers, where they should be both defined in the tree
  now, but backward compatibility is maintained in the code

* modification of the relevant drivers:

  * hwmon - just a straight-forward API change
  * power/reset driver - API change
  * regulator - API change plus error handling
    simplification
  * osc clock driver - this one required larger rework
    in order to turn in into a standard platform driver
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Acked-by: NMark Brown <broonie@linaro.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NMike Turquette <mturquette@linaro.org>

Since the default DMA ops for arm64 are non-coherent, mark the X-Gene
controller explicitly as dma-coherent to avoid additional cache
maintenance.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Loc Ho <lho@apm.com>

This patch adds APM X-Gene SoC AHCI SATA host controller DTS entries.
Signed-off-by: NLoc Ho <lho@apm.com>
Signed-off-by: NTuan Phan <tphan@apm.com>
Signed-off-by: NSuman Tripathi <stripathi@apm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTejun Heo <tj@kernel.org>

This patch adds the DTS entries for the APM X-Gene SoC 15Gbps Multi-purpose
PHY driver. The PHY for SATA controller 2 and 3 are enabled by default.
Signed-off-by: NLoc Ho <lho@apm.com>
Signed-off-by: NTuan Phan <tphan@apm.com>
Signed-off-by: NSuman Tripathi <stripathi@apm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTejun Heo <tj@kernel.org>

Will Deacon observed that kvmtool uses a size of 0x200 for virtio
block memory region and that the virtio block spec only uses 31 bytes in
the device specific region at 0x100 so reduce the region to a less
wasteful 0x200.
Signed-off-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Describe the virtio device so we can mount disk images in the simulator.

[Reduced the size of the region based on feedback from review -- broonie]
Signed-off-by: NMark Hambleton <mahamble@broadcom.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

With the spin-table SMP booting method, secondary CPUs poll a location
passed in the DT. The foundation-v8.dts file doesn't have this memory
reserved and there is a risk of Linux using it before secondary CPUs are
started.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC with reference to
reference, PCP PLL, SoC PLL, and Ethernet clocks.
Signed-off-by: NLoc Ho <lho@apm.com>
Signed-off-by: NKumar Sankaran <ksankaran@apm.com>
Signed-off-by: NVinayak Kale <vkale@apm.com>
Signed-off-by: NFeng Kan <fkan@apm.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

This patch adds initial DTS files required for APM Mustang board.
Signed-off-by: NKumar Sankaran <ksankaran@apm.com>
Signed-off-by: NLoc Ho <lho@apm.com>
Signed-off-by: NFeng Kan <fkan@apm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Commit 90556ca1 ("arm64: vexpress: Add dts files for the ARMv8 RTSM
models") added foundation-v8.dts, but erroneously set
/cpus/#address-cells = <1> while providing two cells in each cpus/cpu@N
node's reg property.

As of commit ea393a2e ("arm64: smp: honour #address-size when parsing
CPU reg property") we read in as many address cells as specified rather
than always reading two. This means that for foundation-v8.dts, we only
read the first reg cell (zero) for each cpu node, and receive a lot of
warnings at boot of the form "/cpus/cpu@1: duplicate cpu reg properties
in the DT".

This patch corrects foundation-v8.dts to have the correct value for
/cpus/#address-cells.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch adds the DTS files for the ARMv8 RTSM and Foundation models.
Signed-off-by: NPawel Moll <Pawel.Moll@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't
contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to
$(targets) to prevent *.dtb from always being rebuilt. Note

This fixes a regression introduced by the .dtb rule rework in da4cbc6d
"arm64: use new common dtc rule", although since arm64 doesn't actually
have any *.dts yet, this isn't a critical issue.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

Based on Rob Herring's patches for arch/arm, this patch adds a dtbs
target to arch/arm64/boot/Makefile.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>

The current rules have the .dtb files build in a different directory
from the .dts files. This patch changes arm64 to use the generic dtb
rule which builds .dtb files in the same directory as the source .dts.

This requires moving parts of arch/arm64/boot/Makefile into newly created
arch/arm64/boot/dts/Makefile, and updating arch/arm64/Makefile to call the
new Makefile.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRob Herring <rob.herring@calxeda.com>