提交 767ebaff 编写于 作者: T Tanmay Inamdar 提交者: Bjorn Helgaas

arm64: dts: Add APM X-Gene PCIe device tree nodes

Add the device tree nodes for APM X-Gene PCIe host controller and PCIe
clock interface.  Since X-Gene SOC supports maximum 5 ports, 5 dts nodes
are added.
Signed-off-by: NTanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
上级 5f6b6ccd
......@@ -25,6 +25,14 @@
};
};
&pcie0clk {
status = "ok";
};
&pcie0 {
status = "ok";
};
&serial0 {
status = "ok";
};
......
......@@ -269,6 +269,171 @@
enable-mask = <0x2>;
clock-output-names = "rtcclk";
};
pcie0clk: pcie0clk@1f2bc000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f2bc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie0clk";
};
pcie1clk: pcie1clk@1f2cc000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f2cc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie1clk";
};
pcie2clk: pcie2clk@1f2dc000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f2dc000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie2clk";
};
pcie3clk: pcie3clk@1f50c000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f50c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie3clk";
};
pcie4clk: pcie4clk@1f51c000 {
status = "disabled";
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f51c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "pcie4clk";
};
};
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
dma-coherent;
clocks = <&pcie0clk 0>;
};
pcie1: pcie@1f2c0000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
dma-coherent;
clocks = <&pcie1clk 0>;
};
pcie2: pcie@1f2d0000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
dma-coherent;
clocks = <&pcie2clk 0>;
};
pcie3: pcie@1f500000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
dma-coherent;
clocks = <&pcie3clk 0>;
};
pcie4: pcie@1f510000 {
status = "disabled";
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
dma-coherent;
clocks = <&pcie4clk 0>;
};
serial0: serial@1c020000 {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册