提交 db8c0286 编写于 作者: L Loc Ho 提交者: Tejun Heo

arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries

This patch adds APM X-Gene SoC AHCI SATA host controller DTS entries.
Signed-off-by: NLoc Ho <lho@apm.com>
Signed-off-by: NTuan Phan <tphan@apm.com>
Signed-off-by: NSuman Tripathi <stripathi@apm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
上级 81d01bfa
......@@ -218,6 +218,45 @@
enable-offset = <0x0>;
enable-mask = <0x06>;
};
sata01clk: sata01clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sata01clk";
csr-offset = <0x4>;
csr-mask = <0x05>;
enable-offset = <0x0>;
enable-mask = <0x39>;
};
sata23clk: sata23clk@1f22c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f22c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sata23clk";
csr-offset = <0x4>;
csr-mask = <0x05>;
enable-offset = <0x0>;
enable-mask = <0x39>;
};
sata45clk: sata45clk@1f23c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f23c000 0x0 0x1000>;
reg-names = "csr-reg";
clock-output-names = "sata45clk";
csr-offset = <0x4>;
csr-mask = <0x05>;
enable-offset = <0x0>;
enable-mask = <0x39>;
};
};
serial0: serial@1c020000 {
......@@ -259,5 +298,46 @@
apm,tx-boost-gain = <31 31 31 31 31 31>;
apm,tx-eye-tuning = <2 10 10 2 10 10>;
};
sata1: sata@1a000000 {
compatible = "apm,xgene-ahci";
reg = <0x0 0x1a000000 0x0 0x1000>,
<0x0 0x1f210000 0x0 0x1000>,
<0x0 0x1f21d000 0x0 0x1000>,
<0x0 0x1f21e000 0x0 0x1000>,
<0x0 0x1f217000 0x0 0x1000>;
interrupts = <0x0 0x86 0x4>;
status = "disabled";
clocks = <&sata01clk 0>;
phys = <&phy1 0>;
phy-names = "sata-phy";
};
sata2: sata@1a400000 {
compatible = "apm,xgene-ahci";
reg = <0x0 0x1a400000 0x0 0x1000>,
<0x0 0x1f220000 0x0 0x1000>,
<0x0 0x1f22d000 0x0 0x1000>,
<0x0 0x1f22e000 0x0 0x1000>,
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
status = "ok";
clocks = <&sata23clk 0>;
phys = <&phy2 0>;
phy-names = "sata-phy";
};
sata3: sata@1a800000 {
compatible = "apm,xgene-ahci";
reg = <0x0 0x1a800000 0x0 0x1000>,
<0x0 0x1f230000 0x0 0x1000>,
<0x0 0x1f23d000 0x0 0x1000>,
<0x0 0x1f23e000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
status = "ok";
clocks = <&sata45clk 0>;
phys = <&phy3 0>;
phy-names = "sata-phy";
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册