Converting f_obex to the new function interface requires converting
the f_obex's function code and its users.

This patch converts the f_obex.c to the new function interface.
The file is now compiled into a separate usb_f_obex.ko module.

The old function interface is provided by means of preprocessor
conditional directives. After all users are converted, the old interface
can be removed.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

this patch implements the new configfs based interface
on f_serial function driver.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

There are no old function interface users left, so the old interface
can be removed.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Converting f_serial to the new function interface requires converting
the f_serial's function code and its users.

This patch converts the f_serial.c to the new function interface.

The file is now compiled into a separate usb_f_serial.ko module.
The old function interface is provided by means of preprocessor
conditional directives. After all users are converted, the old interface
can be removed.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

f_serial.c isn't necessary in nokia.c, we can
safely remove it.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

In order to convert to configfs the USB functions need to be converted
to the new interface from Sebastian, which also requires turning them
into separate modules. Some of these modules will consist of just
one object file, e.g. f_ncm.o. But some of the modules will eventually
consist of more than one object file, e.g. for mass storage there
will be f_mass_storage.o and storage_common.o. The resulting module
cannot be called f_mass_storage.ko due to cyclic dependency. This patch
introduces a naming scheme for the said resulting modules:

usb_f_xxxxxx.ko

e.g. usb_f_mass_storage.ko, usb_f_ss_lb.ko, usb_f_rndis.ko etc.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

|# modprobe dummy_hcd num=2
|# modprobe libcomposite

|# lsmod
|Module                  Size  Used by
|libcomposite           31648  0
|dummy_hcd              19871  0

|# mkdir /sys/kernel/config/usb_gadget/oha
|# cd /sys/kernel/config/usb_gadget/oha
|# mkdir configs/def.1
|# mkdir configs/def.2
|# mkdir functions/acm.ttyS1
|# mkdir strings/0x1
|mkdir: cannot create directory `strings/0x1': Invalid argument
|# mkdir strings/0x409
|# mkdir strings/1033
|mkdir: cannot create directory `strings/1033': File exists
|# mkdir strings/1032
|# mkdir configs/def.1/strings/0x409
|# mkdir configs/def.2/strings/0x409

|#find . -ls
|   975    0 drwxr-xr-x   5 root     root            0 Dec 23 17:40 .
|   978    0 drwxr-xr-x   4 root     root            0 Dec 23 17:43 ./strings
|  4100    0 drwxr-xr-x   2 root     root            0 Dec 23 17:43 ./strings/1032
|   995    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/1032/serialnumber
|   996    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/1032/product
|   997    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/1032/manufacturer
|  2002    0 drwxr-xr-x   2 root     root            0 Dec 23 17:41 ./strings/0x409
|   998    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/0x409/serialnumber
|   999    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/0x409/product
|  1000    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/0x409/manufacturer
|   977    0 drwxr-xr-x   4 root     root            0 Dec 23 17:41 ./configs
|  4081    0 drwxr-xr-x   3 root     root            0 Dec 23 17:41 ./configs/def.2
|  4082    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 ./configs/def.2/strings
|  2016    0 drwxr-xr-x   2 root     root            0 Dec 23 17:42 ./configs/def.2/strings/0x409
|  1001    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.2/strings/0x409/configuration
|  1002    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.2/bmAttributes
|  1003    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.2/MaxPower
|   979    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 ./configs/def.1
|   980    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 ./configs/def.1/strings
|  5122    0 drwxr-xr-x   2 root     root            0 Dec 23 17:42 ./configs/def.1/strings/0x409
|  1004    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.1/strings/0x409/configuration
|  1005    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.1/bmAttributes
|  1006    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.1/MaxPower
|   976    0 drwxr-xr-x   3 root     root            0 Dec 23 17:41 ./functions
|   981    0 drwxr-xr-x   2 root     root            0 Dec 23 17:41 ./functions/acm.ttyS1
|  1007    0 -r--r--r--   1 root     root         4096 Dec 23 17:43 ./functions/acm.ttyS1/port_num
|  1008    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./UDC
|  1009    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bcdUSB
|  1010    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bcdDevice
|  1011    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./idProduct
|  1012    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./idVendor
|  1013    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bMaxPacketSize0
|  1014    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bDeviceProtocol
|  1015    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bDeviceSubClass
|  1016    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bDeviceClass

|# cat functions/acm.ttyS1/port_num
|0
|# ls -lah /dev/ttyGS*
|crw-rw---T 1 root dialout 252, 0 Dec 23 17:41 /dev/ttyGS0
|
|# echo 0x1234 > idProduct
|# echo 0xabcd > idVendor
|# echo 1122 > strings/0x409/serialnumber
|# echo "The manufacturer" > strings/0x409/manufacturer
|# echo 1 > strings/1032/manufacturer
|# echo 1sa > strings/1032/product
|# echo tada > strings/1032/serialnumber
|echo "Primary configuration" > configs/def.1/strings/0x409/configuration
|# echo "Secondary configuration" > configs/def.2/strings/0x409/configuration
|# ln -s functions/acm.ttyS1 configs/def.1/
|# ln -s functions/acm.ttyS1 configs/def.2/
|find configs/def.1/ -ls
|   979    0 drwxr-xr-x   3 root     root            0 Dec 23 17:49 configs/def.1/
|  6264    0 lrwxrwxrwx   1 root     root            0 Dec 23 17:48 configs/def.1/acm.ttyS1 -> ../../../../usb_gadget/oha/functions/acm.ttyS1
|   980    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 configs/def.1/strings
|  5122    0 drwxr-xr-x   2 root     root            0 Dec 23 17:49 configs/def.1/strings/0x409
|  6284    0 -rw-r--r--   1 root     root         4096 Dec 23 17:47 configs/def.1/strings/0x409/configuration
|  6285    0 -rw-r--r--   1 root     root         4096 Dec 23 17:49 configs/def.1/bmAttributes
|  6286    0 -rw-r--r--   1 root     root         4096 Dec 23 17:49 configs/def.1/MaxPower
|
|echo 120 > configs/def.1/MaxPower
|
|# ls -lh /sys/class/udc/
|total 0
|lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.0 -> ../../devices/platform/dummy_udc.0/udc/dummy_udc.0
|lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.1 -> ../../devices/platform/dummy_udc.1/udc/dummy_udc.1
|# echo dummy_udc.0 > UDC
|# lsusb
|Bus 001 Device 002: ID abcd:1234 Unknown
|
|lsusb -d abcd:1234 -v
|Device Descriptor:
…
|  idVendor           0xabcd Unknown
|  idProduct          0x1234
|  bcdDevice            3.06
|  iManufacturer           1 The manufacturer
|  iProduct                2
|  iSerial                 3 1122
|  bNumConfigurations      2
…
|echo "" > UDC

v5…v6
- wired up strings with usb_gstrings_attach()
- add UDC attribe. Write "udc-name" will bind the gadget. Write an empty
  string (it should contain \n since 0 bytes write get optimzed away)
  will unbind the UDC from the gadget. The name of available UDCs can be
  obtained from /sys/class/udc/

v4…v5
- string rework. This will add a strings folder incl. language code like
    strings/409/manufacturer
  as suggested by Alan.
- rebased ontop reworked functions.c which has usb_function_instance
  which is used prior after "mkdir acm.instance" and can be directly
  used for configuration via configfs.

v3…v4
 - moved functions from the root folde down to the gadget as suggested
   by Michał
 - configs have now their own configs folder as suggested by Michał.
   The folder is still name.bConfigurationValue where name becomes the
   sConfiguration. Is this usefull should we just stilc
   configs/bConfigurationValue/ ?
 - added configfs support to the ACM function. The port_num attribute is
   exported by f_acm. An argument has been added to the USB alloc
   function to distinguish between "old" (use facm_configure() to
   configure and configfs interface (expose a config_node).
   The port_num is currently a dumb counter. It will
   require some function re-work to make it work.

scheduled for v5:
- sym linking function into config.

v2…v3
- replaced one ifndef by ifdef as suggested by Micahał
- strstr()/strchr() function_make as suggested by Micahł
- replace [iSerialNumber|iProduct|iManufacturer] with
  [sSerialNumber|sProduct|sManufacturer] as suggested by Alan
- added creation of config descriptors

v1…v2
- moved gadgets from configfs' root directory into /udcs/ within our
  "usb_gadget" folder. Requested by Andrzej & Michał
- use a dot as a delimiter between function's name and its instance's name
  as suggested by Michał
- renamed all config_item_type, configfs_group_operations, make_group,
  drop_item as suggested by suggested by Andrzej to remain consisten
  within this file and within other configfs users
- Since configfs.c and functions.c are now part of the udc-core module,
  the module itself is now called udc. Also added a tiny ifdef around
  init code becuase udc-core is subsys init and this is too early for
  configfs in the built-in case. In the module case, we can only have
  one init function.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

It possible to allocate the tty port number within the "instance"
structure of the function and there is no need to expose this
information within the gadget and therefore it is removed here.
This patch converts only f_acm and all its users. The other gadgets will
follow once the function is converted to the function interface.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

the u_ether.c file has a global variable named the_dev which keeps a
pointer to the network device after it has been created via
gether_setup_name(). It is only used internally by u_ether. This patches
moves the variable to its users and passes it via the port.ioport where
it is saved later anyway.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch converts the acm_ms gadget to make use of the function
framework to request the ACM function.

The "old" include interface for acm is now removed since nokia was the
last user of it (for ACM).
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Modify ab8500_usb_set_peripheral() and ab8500_usb_set_host() code to
schedule phy_dis_work only when necessary in order to prevent regulator
count mismatch during reboot/shutdown.
Signed-off-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

ab8500_usb_delayed_work was implemented as a workaroud for the internal
only and now unsupported v1.0 version of AB850.  This patch removes the
delayed work and just leave a link status update call at probe time.
Signed-off-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Amend the ab8500-usb driver to optionally take a pin control handle and
set the state of the pins to "default" on ab8500_usb_phy_enable and to
"sleep" on ab8500_usb_phy_disable.

The pinctrl handle is released on ab8500_usb_phy_disable because USB
pins are shared with ab8505_micro_usb_iddet driver.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Fix last ab->phy.notifier call to use vbus_draw as notifier argument, as
that's used in ab8500_charger to control charging current.

Also drop a related TODO comment, and the additional
ux500_musb_set_vbus(musb, 0), as with this patch it was causing an
erratic behaviour of gadget ep0 state machine.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

To prevent clock and regulator frameworks from complaining, only disable
the host or peripheral phy if they were enabled.
Reported-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add ab8500_usb_regulator_{enable,disable} functions to control USB phy
regulators on corresponding ab8500_usb_phy_{enable,disable} events.

This contains some workaround and optimization for specific AB8500
versions.
Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Signed-off-by: NPraveena Nadahally <praveen.nadahally@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Split ab8500_usb_phy_ctrl into separate enable/disable functions to make
the code more linear and readable.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add initial regulator support to ab8500-usb by introducing necessary
devm_regulator_get().
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

AB8500 v2.0 has eye diagram issues when drawing more than 100mA from
VBUS.  Force charging current to 100mA in case of standard host.
Signed-off-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Set phy tuning values proposed by the hardware teams for AB8500 and
AB8505 to improve USB eye diagram performances.
Signed-off-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Convert local data allocation to devm_kzalloc and drop unnecessary fail
path code.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Drop references to deprecated U5500 platform in driver comments.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Remove all section annotations to fix the
following section mismatches:

>> WARNING: drivers/usb/gadget/pxa27x_udc.o(.text+0x597c): Section mismatch in
reference from the function .pxa_udc_probe() to the function
.init.text:.udc_init_data.constprop.11()
   The function .pxa_udc_probe() references
   the function __init .udc_init_data.constprop.11().
   This is often because .pxa_udc_probe lacks a __init
   annotation or the annotation of .udc_init_data.constprop.11 is wrong.
--
>> WARNING: drivers/usb/gadget/pxa27x_udc.o(.text+0x5a04): Section mismatch in
reference from the function .pxa_udc_probe() to the function
.init.text:.pxa_ep_setup()
   The function .pxa_udc_probe() references
   the function __init .pxa_ep_setup().
   This is often because .pxa_udc_probe lacks a __init
   annotation or the annotation of .pxa_ep_setup is wrong.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

udc-core would leak 'udc' memory in some error
cases. Fix it by kfree()ing udc on error path.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Enter IDMA_RESET only when the controller has been reset or
the device has been plugged in to or out from a host. In
IDMA_RESET, we should disable the corresponding PRD interrupt.
Also there is a redundant space eliminated.

fusb300_udc driver is tested on FARADAY platform a369 with
FUSB300 FPGA v1.8
Signed-off-by: NYuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The final version of fusb300 controller adds EPSET0_STL_CLR
for clearing EP0 stall and also removes EPSET0_EPn_TX0BYTE.

fusb300_udc driver is tested on FARADAY platform a369 with
FUSB300 FPGA v1.8
Signed-off-by: NYuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following
build warning when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used
when the CONFIG_PM_SLEEP is enabled. Unnecessary CONFIG_PM ifdefs
are removed.

drivers/usb/dwc3/core.c:682:12: warning: 'dwc3_suspend' defined but not used [-Wunused-function]
drivers/usb/dwc3/core.c:709:12: warning: 'dwc3_resume' defined but not used [-Wunused-function]
drivers/usb/dwc3/dwc3-omap.c:430:12: warning: 'dwc3_omap_suspend' defined but not used [-Wunused-function]
drivers/usb/dwc3/dwc3-omap.c:440:12: warning: 'dwc3_omap_resume' defined but not used [-Wunused-function]
drivers/usb/dwc3/dwc3-exynos.c:185:12: warning: 'dwc3_exynos_suspend' defined but not used [-Wunused-function]
drivers/usb/dwc3/dwc3-exynos.c:194:12: warning: 'dwc3_exynos_resume' defined but not used [-Wunused-function]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

avoid reading fifo rxcount is zero of fifo is empty, hence
read fifo only if rxcount is non-zero
Signed-off-by: NRavi Babu <ravibabu@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The musb controller uses single bit defintion for both reset and
babble events. The babble event is valid only when controller is
active a-host, and hence print the babble message only when the
controller is active a-host.
Signed-off-by: NRavi Babu <ravibabu@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

MUSB controller cannot work in DMA mode with misaligned buffers,
switching in PIO mode.

HCD core has hooks that allow to override the default DMA
mapping and unmapping routines for host controllers that have
special DMA requirements, such as alignment constraints.

It is observed that work in PIO mode is slow and it's better
to align buffers properly before passing them to MUSB

This increased throughput 80->120 MBits/s over musb@omap4 with
USB Gigabit Ethernet adapter attached.

Some ideas are taken from ehci-tegra.c
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This patch adds the support for 'get_unmapped_area' in UVC gadget
which is called when the 'mmap' system call is executed on MMUless
architectures.
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

This patch reworks the videobuffer management logic present in the UVC
webcam gadget and ports it to use the "more apt" videobuf2 framework for
video buffer management.

To support routing video data captured from a real V4L2 video capture
device with a "zero copy" operation on videobuffers (as they pass from
the V4L2 domain to UVC domain via a user-space application), we need to
support USER_PTR IO method at the UVC gadget side.

So the V4L2 capture device driver can still continue to use MMAP IO
method and now the user-space application can just pass a pointer to the
video buffers being dequeued from the V4L2 device side while queueing
them at the UVC gadget end. This ensures that we have a "zero-copy"
design as the videobuffers pass from the V4L2 capture device to the UVC
gadget.

Note that there will still be a need to apply UVC specific payload
headers on top of each UVC payload data, which will still require a copy
operation to be performed in the 'encode' routines of the UVC gadget.

This patch also addresses one issue found out while porting the UVC
gadget to videobuf2 framework:
	- In case the usb requests queued by the gadget get completed
	  with a status of -ESHUTDOWN (disconnected from host),
	  the queue of videobuf2 should be cancelled to ensure that the
	  application space daemon is not left in a state waiting for
	  a vb2 to be successfully absorbed at the USB side.
Signed-off-by: NBhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

This patch fixup below sparse errors

CHECK   ${RENESAS_USB}/common.c
${RENESAS_USB}/common.c:313:17: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/common.c:322:17: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/common.c:384:17: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/common.c:524:9: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/common.c:545:9: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/common.c:574:9: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/common.c:606:9: error: incompatible types in conditional expression (different base types)
${RENESAS_USB}/mod_gadget.c:233:28: warning: symbol 'req_clear_feature' was not declared. Should it be static?
${RENESAS_USB}/mod_gadget.c:274:28: warning: symbol 'req_set_feature' was not declared. Should it be static?
${RENESAS_USB}/mod_gadget.c:375:28: warning: symbol 'req_get_status' was not declared. Should it be static?

[ balbi@ti.com : added three sparse fixes to mod_gadget.c ]
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Using pdata to pass clock name is not correct.
Directly get clock from usb drivers.
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The origianl understanding of clock is wrong. The UDC controller
only have one clock input.
Passing clock name by pdata is wrong. The clock is defined by device
iteself.

Cc: Chao Xie <chao.xie@marvell.com>
Cc: Yu Xu <yuxu@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The clock name will directly get by driver. Removing
the name from pdata.
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The clock name will directly get by driver. Removing
the name from pdata.
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The origianl understanding of clock is wrong. The EHCI controller
only have one clock input.
Passing clock name by pdata is wrong. The clock is defined by device
iteself.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NChao Xie <chao.xie@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>