提交 899f0f56 编写于 作者: P Patrice Chotard 提交者: Felipe Balbi

usb: phy: ab8500-usb: adopt pinctrl support

Amend the ab8500-usb driver to optionally take a pin control handle and
set the state of the pins to "default" on ab8500_usb_phy_enable and to
"sleep" on ab8500_usb_phy_disable.

The pinctrl handle is released on ab8500_usb_phy_disable because USB
pins are shared with ab8505_micro_usb_iddet driver.
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 77f4396e
......@@ -33,6 +33,7 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/usb/musb-ux500.h>
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
/* Bank AB8500_SYS_CTRL2_BLOCK */
#define AB8500_MAIN_WD_CTRL_REG 0x01
......@@ -132,6 +133,8 @@ struct ab8500_usb {
struct regulator *v_ulpi;
int saved_v_ulpi;
int previous_link_status_state;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_sleep;
};
static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
......@@ -240,6 +243,11 @@ static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
AB8500_BIT_PHY_CTRL_DEVICE_EN;
/* mux and configure USB pins to DEFAULT state */
ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT);
if (IS_ERR(ab->pinctrl))
dev_err(ab->dev, "could not get/set default pinstate\n");
ab8500_usb_regulator_enable(ab);
abx500_mask_and_set_register_interruptible(ab->dev,
......@@ -263,6 +271,22 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
ab8500_usb_wd_workaround(ab);
ab8500_usb_regulator_disable(ab);
if (!IS_ERR(ab->pinctrl)) {
/* configure USB pins to SLEEP state */
ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl,
PINCTRL_STATE_SLEEP);
if (IS_ERR(ab->pins_sleep))
dev_dbg(ab->dev, "could not get sleep pinstate\n");
else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
dev_err(ab->dev, "could not set pins to sleep state\n");
/* as USB pins are shared with idddet, release them to allow
* iddet to request them
*/
pinctrl_put(ab->pinctrl);
}
}
#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_enable(ab, true)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册