提交 8db12231 编写于 作者: S Sakethram Bommisetti 提交者: Felipe Balbi

usb: phy: ab8500-usb: drop link status delayed work

ab8500_usb_delayed_work was implemented as a workaroud for the internal
only and now unsupported v1.0 version of AB850.  This patch removes the
delayed work and just leave a link status update call at probe time.
Signed-off-by: NSakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 899f0f56
......@@ -124,9 +124,7 @@ struct ab8500_usb {
struct device *dev;
struct ab8500 *ab8500;
unsigned vbus_draw;
struct delayed_work dwork;
struct work_struct phy_dis_work;
unsigned long link_status_wait;
enum ab8500_usb_mode mode;
struct regulator *v_ape;
struct regulator *v_musb;
......@@ -556,14 +554,6 @@ static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
return IRQ_HANDLED;
}
static void ab8500_usb_delayed_work(struct work_struct *work)
{
struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
dwork.work);
abx500_usb_link_status_update(ab);
}
static void ab8500_usb_phy_disable_work(struct work_struct *work)
{
struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
......@@ -635,12 +625,6 @@ static int ab8500_usb_set_peripheral(struct usb_otg *otg,
} else {
otg->gadget = gadget;
otg->phy->state = OTG_STATE_B_IDLE;
/* Phy will not be enabled if cable is already
* plugged-in. Schedule to enable phy.
* Use same delay to avoid any race condition.
*/
schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}
return 0;
......@@ -665,11 +649,6 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
schedule_work(&ab->phy_dis_work);
} else {
otg->host = host;
/* Phy will not be enabled if cable is already
* plugged-in. Schedule to enable phy.
* Use same delay to avoid any race condition.
*/
schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}
return 0;
......@@ -792,11 +771,6 @@ static int ab8500_usb_probe(struct platform_device *pdev)
ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
/* v1: Wait for link status to become stable.
* all: Updates form set_host and set_peripheral as they are atomic.
*/
INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
......@@ -893,6 +867,8 @@ static int ab8500_usb_probe(struct platform_device *pdev)
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);
abx500_usb_link_status_update(ab);
dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
return 0;
......@@ -902,8 +878,6 @@ static int ab8500_usb_remove(struct platform_device *pdev)
{
struct ab8500_usb *ab = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&ab->dwork);
cancel_work_sync(&ab->phy_dis_work);
usb_remove_phy(&ab->phy);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册