- 13 9月, 2012 1 次提交
-
-
由 Varun Sethi 提交于
For the 64 bit case separate out e5500 cpu_setup and cpu_restore functions. The cpu_setup function (for the primary core) is passed the cpu_spec pointer, which is not there in case of the cpu_restore function. Also, in our case we will have to manipulate the CPU_FTR_EMB_HV flag on the primary core. Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 07 9月, 2012 1 次提交
-
-
由 Mihai Caraman 提交于
Critical exception on 64-bit booke uses user-visible SPRG3 as scratch. Restore VDSO information in SPRG3 on exception prolog. Use a common sprg3 field in PACA for all powerpc64 architectures. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 05 9月, 2012 5 次提交
-
-
由 Mihai Caraman 提交于
Embedded.Hypervisor category defines GSPRG0..3 physical registers for guests. Avoid SPRG4-7 usage as scratch in host exception handlers, otherwise guest SPRG4-7 registers will be clobbered. For bolted TLB miss exception handlers, which is the version currently supported by KVM, use SPRN_SPRG_GEN_SCRATCH aka SPRG0 instead of SPRN_SPRG_TLB_SCRATCH aka SPRG6. Keep using TLB PACA slots to fit in one 64-byte cache line. For critical exception handlers use SPRG3 instead of SPRG7. Provide a routine to store and restore user-visible SPRGs. This will be subsequently used to restore VDSO information in SPRG3. Add EX_R13 to paca slots to free up SPRG3 and change the critical exception epilog to use it. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Refactor exception prolog to get rid of mfspr srr1 duplicate. This was introduced by KVM integration, with DO_KVM macro logic expecting srr1 value earlier in r11. Reserve r11 to hold srr1's value also required at the end of the prolog and free up r10 to serve as spare in addition macros. For syscalls case this change does not add any performance penalty. For irq soft-disabled case the change adds a store/load of conditional register value to/from a paca slot. Paca slots fit in one 64-byte cache line so these additional operations have little impact on performance. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Hook DO_KVM macro into 64-bit booke for KVM integration. Extend interrupt handlers' parameter list with interrupt vector numbers to accomodate the macro. Only the bolted version of tlb miss handers is addressed now. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Guest Doorbell interrupts use guest save and restore registers. Add a new Guest Doorbell exception type to accommodate GSRR0/1 SPRs usage in exception prolog and fix the exception handler. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Machine check exception handler was using a wrong prolog. Hypervisors like KVM which are called early from the exception handler rely on the interrupt source. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 7月, 2012 1 次提交
-
-
由 Stuart Yoder 提交于
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 7月, 2012 2 次提交
-
-
由 Michael Neuling 提交于
Some macros use RA where when RA=R0 the values is 0, so make this the enforced mnemonic in the macro. Idea suggested by Andreas Schwab. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
These macros are using integers where they could be using logical names since they take registers. We are going to enforce this soon, so fix these up now. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 3月, 2012 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The current implementation of lazy interrupts handling has some issues that this tries to address. We don't do the various workarounds we need to do when re-enabling interrupts in some cases such as when returning from an interrupt and thus we may still lose or get delayed decrementer or doorbell interrupts. The current scheme also makes it much harder to handle the external "edge" interrupts provided by some BookE processors when using the EPR facility (External Proxy) and the Freescale Hypervisor. Additionally, we tend to keep interrupts hard disabled in a number of cases, such as decrementer interrupts, external interrupts, or when a masked decrementer interrupt is pending. This is sub-optimal. This is an attempt at fixing it all in one go by reworking the way we do the lazy interrupt disabling from the ground up. The base idea is to replace the "hard_enabled" field with a "irq_happened" field in which we store a bit mask of what interrupt occurred while soft-disabled. When re-enabling, either via arch_local_irq_restore() or when returning from an interrupt, we can now decide what to do by testing bits in that field. We then implement replaying of the missed interrupts either by re-using the existing exception frame (in exception exit case) or via the creation of a new one from an assembly trampoline (in the arch_local_irq_enable case). This removes the need to play with the decrementer to try to create fake interrupts, among others. In addition, this adds a few refinements: - We no longer hard disable decrementer interrupts that occur while soft-disabled. We now simply bump the decrementer back to max (on BookS) or leave it stopped (on BookE) and continue with hard interrupts enabled, which means that we'll potentially get better sample quality from performance monitor interrupts. - Timer, decrementer and doorbell interrupts now hard-enable shortly after removing the source of the interrupt, which means they no longer run entirely hard disabled. Again, this will improve perf sample quality. - On Book3E 64-bit, we now make the performance monitor interrupt act as an NMI like Book3S (the necessary C code for that to work appear to already be present in the FSL perf code, notably calling nmi_enter instead of irq_enter). (This also fixes a bug where BookE perfmon interrupts could clobber r14 ... oops) - We could make "masked" decrementer interrupts act as NMIs when doing timer-based perf sampling to improve the sample quality. Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: - Add hard-enable to decrementer, timer and doorbells - Fix CR clobber in masked irq handling on BookE - Make embedded perf interrupt act as an NMI - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want to retrigger an interrupt without preventing hard-enable v3: - Fix or vs. ori bug on Book3E - Fix enabling of interrupts for some exceptions on Book3E v4: - Fix resend of doorbells on return from interrupt on Book3E v5: - Rebased on top of my latest series, which involves some significant rework of some aspects of the patch. v6: - 32-bit compile fix - more compile fixes with various .config combos - factor out the asm code to soft-disable interrupts - remove the C wrapper around preempt_schedule_irq v7: - Fix a bug with hard irq state tracking on native power7
-
由 Benjamin Herrenschmidt 提交于
We were using CR0.EQ after EXCEPTION_COMMON, hoping it still contained whether we came from userspace or kernel space. However, under some circumstances, EXCEPTION_COMMON will call C code and clobber non-volatile registers, so we really need to re-load the previous MSR from the stackframe and re-test. While there, invert the condition to make the fast path more obvious and remove the BUG_OPCODE which was a debugging leftover and call .ret_from_except as we should. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
If we get a floating point, altivec or vsx unavaible interrupt in kernel, we trigger a kernel error. There is no point preserving the interrupt state, in fact, that can even make debugging harder as the processor state might change (we may even preempt) between taking the exception and landing in a debugger. So just make those 3 disable interrupts unconditionally. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: On BookE only disable when hitting the kernel unavailable path, otherwise it will fail to restore softe as fast_exception_return doesn't do it.
-
由 Benjamin Herrenschmidt 提交于
We currently turn interrupts back to their previous state before calling do_page_fault(). This can be annoying when debugging as a bad fault will potentially have lost some processor state before getting into the debugger. We also end up calling some generic code with interrupts enabled such as notify_page_fault() with interrupts enabled, which could be unexpected. This changes our code to behave more like other architectures, and make the assembly entry code call into do_page_faults() with interrupts disabled. They are conditionally re-enabled from within do_page_fault() in the same spot x86 does it. While there, add the might_sleep() test in the case of a successful trylock of the mmap semaphore, again like x86. Also fix a bug in the existing assembly where r12 (_MSR) could get clobbered by C calls (the DTL accounting in the exception common macro and DISABLE_INTS) in some cases. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> --- v2. Add the r12 clobber fix
-
- 29 6月, 2011 1 次提交
-
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 19 5月, 2011 2 次提交
-
-
由 Scott Wood 提交于
Without this, we attempt to use doorbells for IPIs, and end up branching to some bad address. Plus, even for the exceptions we don't implement, it's good to handle it and get a message out. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 06 5月, 2011 2 次提交
-
-
由 Jack Miller 提交于
Signed-off-by: NJack Miller <jack@codezen.org> Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 David Gibson 提交于
Add a platform for the Wire Speed Processor, based on the PPC A2. This includes code for the ICS & OPB interrupt controllers, as well as a SCOM backend, and SCOM based cpu bringup. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJack Miller <jack@codezen.org> Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 4月, 2011 2 次提交
-
-
由 Jack Miller 提交于
When we set up the TLB for ourselves on Book3E, we need to flush out any old mappings established by the firmware or bootloader. At present we attempt this with a tlbilx to flush everything, but this will leave behind any entries with the IPROT bit set. There are several good reason firmware might establish mappings with IPROT, and in fact ePAPR compliant firmwares are required to establish their initial mapped area with IPROT. This patch, therefore adds more complex code to scan through the TLB upon entry and flush away any entries that are not our own. Signed-off-by: NJack Miller <jack@codezen.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
An erratum on A2 can lead to the bolted entry we insert for the linear mapping being evicted, to avoid that write the bolted entry to way 3. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 14 7月, 2010 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
We patch the TLB miss exception vectors to point to alternate functions when using HW page table on BookE. However, we were patching in a new branch in the first instruction of the exception handler instead of the second one, thus overriding the nop that is in the first instruction. This cause problems when single stepping as we rely on that nop for the single step to stop properly within the exception vector range rather than on the target of the branch. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We use a similar technique to ppc32: We set a thread local flag to indicate that we are about to enter or have entered the stop state, and have fixup code in the async interrupt entry code that reacts to this flag to make us return to a different location (sets NIP to LINK in our case). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> -- v2. Fix lockdep bug Re-mask interrupts when coming back from idle
-
- 09 7月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Note that critical doorbells are an unimplemented stub just like other critical or machine check handlers, since we haven't done support for "levelled" exceptions yet. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 9月, 2009 1 次提交
-
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/powerpc/kernel/exceptions-64e.S Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 8月, 2009 3 次提交
-
-
由 Kumar Gala 提交于
We now search through TLBnCFG looking for the first array that has IPROT support (we assume that there is only one). If that TLB has hardware entry select (HES) support we use the existing code and with the proper TLB select (the HES code still needs to clean up bolted entries from firmware). The non-HES code is pretty similiar to the 32-bit FSL Book-E code but does make some new assumtions (like that we have tlbilx) and simplifies things down a bit. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
Not all 64-bit Book-3E parts will have fixed IVORs so add a function that cpusetup code can call to setup the base IVORs (0..15) to match the fixed offsets. We need to 'or' part of interrupt_base_book3e into the IVORs since on parts that have them the IVPR doesn't extend as far down. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
Match what we do on 32-bit Book-E processors and enable the decrementer in generic_calibrate_decr. We need to make sure we disable the decrementer early in boot since we currently use lazy (soft) interrupt on 64-bit Book-E and possible get a decrementer exception before we are ready for it. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 8月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This contains all the bits that didn't fit in previous patches :-) This includes the actual exception handlers assembly, the changes to the kernel entry, other misc bits and wiring it all up in Kconfig. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-