powerpc: Remaining 64-bit Book3E support

This contains all the bits that didn't fit in previous patches :-) This
includes the actual exception handlers assembly, the changes to the
kernel entry, other misc bits and wiring it all up in Kconfig.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/Kconfig

@@ -472,7 +472,7 @@ config PPC_16K_PAGES
 	bool "16k page size" if 44x
 
 config PPC_64K_PAGES
-	bool "64k page size" if 44x || PPC_STD_MMU_64
+	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES

arch/powerpc/include/asm/hw_irq.h

@@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void);
 #define raw_irqs_disabled()		(local_get_flags() == 0)
 #define raw_irqs_disabled_flags(flags)	((flags) == 0)
 
+#ifdef CONFIG_PPC_BOOK3E
+#define __hard_irq_enable()	__asm__ __volatile__("wrteei 1": : :"memory");
+#define __hard_irq_disable()	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
 #define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
 #define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+#endif
 
 #define  hard_irq_disable()			\
 	do {					\

arch/powerpc/include/asm/smp.h

@@ -153,6 +153,7 @@ extern void arch_send_call_function_ipi(cpumask_t mask);
  * 64-bit but defining them all here doesn't harm
  */
 extern void generic_secondary_smp_init(void);
+extern void generic_secondary_thread_init(void);
 extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;

arch/powerpc/kernel/Makefile

@@ -33,10 +33,10 @@ obj-y				:= cputable.o ptrace.o syscalls.o \
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
-				   paca.o cpu_setup_ppc970.o \
-				   cpu_setup_pa6t.o \
-				   firmware.o nvram_64.o
+				   paca.o nvram_64.o firmware.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
+obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
@@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 obj-$(CONFIG_FSL_BOOKE)		+= cpu_setup_fsl_booke.o dbell.o
 
-extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
-extra-$(CONFIG_PPC64)		:= head_64.o
+extra-y				:= head_$(CONFIG_WORD_SIZE).o
+extra-$(CONFIG_PPC_BOOK3E_32)	:= head_new_booke.o
 extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o

arch/powerpc/kernel/cputable.c

@@ -93,7 +93,7 @@ extern void __restore_cpu_power7(void);
 				 PPC_FEATURE_BOOKE)
 
 static struct cpu_spec __initdata cpu_specs[] = {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 	{	/* Power3 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00400000,
@@ -508,7 +508,30 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "power4",
 	}
-#endif	/* CONFIG_PPC64 */
+#endif	/* CONFIG_PPC_BOOK3S_64 */
+#ifdef CONFIG_PPC_BOOK3E_64
+	{	/* This is a default entry to get going, to be replaced by
+		 * a real one at some stage
+		 */
+#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "Book3E",
+		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+					  MMU_FTR_USE_TLBIVAX_BCAST |
+					  MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.machine_check		= machine_check_generic,
+		.platform		= "power6",
+	},
+#endif
+
 #ifdef CONFIG_PPC32
 #if CLASSIC_PPC
 	{	/* 601 */

arch/powerpc/kernel/entry_64.S

@@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION
 2:
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif /* CONFIG_PPC_ISERIES */
+
+	/* Hard enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	mfmsr	r11
 	ori	r11,r11,MSR_EE
 	mtmsrd	r11,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef SHOW_SYSCALLS
 	bl	.do_show_syscall
@@ -168,15 +174,25 @@ syscall_exit:
 #endif
 	clrrdi	r12,r1,THREAD_SHIFT
 
-	/* disable interrupts so current_thread_info()->flags can't change,
-	   and so that we don't get interrupted after loading SRR0/1. */
 	ld	r8,_MSR(r1)
+#ifdef CONFIG_PPC_BOOK3S
+	/* No MSR:RI on BookE */
 	andi.	r10,r8,MSR_RI
 	beq-	unrecov_restore
+#endif
+
+	/* Disable interrupts so current_thread_info()->flags can't change,
+	 * and so that we don't get interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r10
 	rldicl	r10,r10,48,1
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
+
 	ld	r9,TI_FLAGS(r12)
 	li	r11,-_LAST_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
@@ -194,9 +210,13 @@ syscall_error_cont:
 	 * userspace and we take an exception after restoring r13,
 	 * we end up corrupting the userspace r13 value.
 	 */
+#ifdef CONFIG_PPC_BOOK3S
+	/* No MSR:RI on BookE */
 	li	r12,MSR_RI
 	andc	r11,r10,r12
 	mtmsrd	r11,1			/* clear MSR.RI */
+#endif /* CONFIG_PPC_BOOK3S */
+
 	beq-	1f
 	ACCOUNT_CPU_USER_EXIT(r11, r12)
 	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
@@ -206,7 +226,7 @@ syscall_error_cont:
 	mtcr	r5
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r8
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 
 syscall_error:	
@@ -276,9 +296,13 @@ syscall_exit_work:
 	beq	.ret_from_except_lite
 
 	/* Re-enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	mfmsr	r10
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	and.	r0,r0,r22
 	beq+	1f
 	andc	r22,r22,r0
-	mtmsrd	r22
+	MTMSRD(r22)
 	isync
 1:	std	r20,_NIP(r1)
 	mfcr	r23
@@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	std	r6,PACACURRENT(r13)	/* Set new 'current' */
 
 	ld	r8,KSP(r4)	/* new stack pointer */
+#ifdef CONFIG_PPC_BOOK3S
 BEGIN_FTR_SECTION
   BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
@@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
 	slbie	r6		/* Workaround POWER5 < DD2.1 issue */
 	slbmte	r7,r0
 	isync
-
 2:
+#endif /* !CONFIG_PPC_BOOK3S */
+
 	clrrdi	r7,r8,THREAD_SHIFT	/* base of new stack */
 	/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
 	   because we don't need to leave the 288-byte ABI gap at the
@@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite)
 	 * can't change between when we test it and when we return
 	 * from the interrupt.
 	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r10		/* Get current interrupt state */
 	rldicl	r9,r10,48,1	/* clear MSR_EE */
 	rotldi	r9,r9,16
 	mtmsrd	r9,1		/* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef CONFIG_PREEMPT
 	clrrdi	r9,r1,THREAD_SHIFT	/* current_thread_info() */
@@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 	rldicl	r4,r3,49,63		/* r0 = (r3 >> 15) & 1 */
 	stb	r4,PACAHARDIRQEN(r13)
 
+#ifdef CONFIG_PPC_BOOK3E
+	b	.exception_return_book3e
+#else
 	ld	r4,_CTR(r1)
 	ld	r0,_LINK(r1)
 	mtctr	r4
@@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 	rfid
 	b	.	/* prevent speculative execution */
 
+#endif /* CONFIG_PPC_BOOK3E */
+
 iseries_check_pending_irqs:
 #ifdef CONFIG_PPC_ISERIES
 	ld	r5,SOFTE(r1)
@@ -638,6 +673,11 @@ do_work:
 	li	r0,1
 	stb	r0,PACASOFTIRQEN(r13)
 	stb	r0,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+	bl	.preempt_schedule
+	wrteei	0
+#else
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1		/* reenable interrupts */
 	bl	.preempt_schedule
@@ -646,6 +686,7 @@ do_work:
 	rldicl	r10,r10,48,1	/* disable interrupts again */
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
@@ -654,8 +695,12 @@ do_work:
 user_work:
 #endif
 	/* Enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
@@ -837,6 +882,10 @@ _GLOBAL(enter_prom)
 
 	/* Switch MSR to 32 bits mode
 	 */
+#ifdef CONFIG_PPC_BOOK3E
+	rlwinm	r11,r11,0,1,31
+	mtmsr	r11
+#else /* CONFIG_PPC_BOOK3E */
         mfmsr   r11
         li      r12,1
         rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
@@ -845,6 +894,7 @@ _GLOBAL(enter_prom)
         rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
         andc    r11,r11,r12
         mtmsrd  r11
+#endif /* CONFIG_PPC_BOOK3E */
         isync
 
 	/* Enter PROM here... */

arch/powerpc/kernel/head_64.S

@@ -121,10 +121,11 @@ __run_at_load:
  */
 	.globl	__secondary_hold
 __secondary_hold:
+#ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
-
+#endif
 	/* Grab our physical cpu number */
 	mr	r24,r3
 
@@ -143,6 +144,7 @@ __secondary_hold:
 	ld	r4,0(r4)		/* deref function descriptor */
 	mtctr	r4
 	mr	r3,r24
+	li	r4,0
 	bctr
 #else
 	BUG_OPCODE
@@ -163,21 +165,49 @@ exception_marker:
 #include "exceptions-64s.S"
 #endif
 
+_GLOBAL(generic_secondary_thread_init)
+	mr	r24,r3
+
+	/* turn on 64-bit mode */
+	bl	.enable_64b_mode
+
+	/* get a valid TOC pointer, wherever we're mapped at */
+	bl	.relative_toc
+
+#ifdef CONFIG_PPC_BOOK3E
+	/* Book3E initialization */
+	mr	r3,r24
+	bl	.book3e_secondary_thread_init
+#endif
+	b	generic_secondary_common_init
 
 /*
  * On pSeries and most other platforms, secondary processors spin
  * in the following code.
  * At entry, r3 = this processor's number (physical cpu id)
+ *
+ * On Book3E, r4 = 1 to indicate that the initial TLB entry for
+ * this core already exists (setup via some other mechanism such
+ * as SCOM before entry).
  */
 _GLOBAL(generic_secondary_smp_init)
 	mr	r24,r3
-	
+	mr	r25,r4
+
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
-	/* get the TOC pointer (real address) */
+	/* get a valid TOC pointer, wherever we're mapped at */
 	bl	.relative_toc
 
+#ifdef CONFIG_PPC_BOOK3E
+	/* Book3E initialization */
+	mr	r3,r24
+	mr	r4,r25
+	bl	.book3e_secondary_core_init
+#endif
+
+generic_secondary_common_init:
 	/* Set up a paca value for this processor. Since we have the
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
@@ -196,6 +226,11 @@ _GLOBAL(generic_secondary_smp_init)
 	b	.kexec_wait		/* next kernel might do better	 */
 
 2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
+#ifdef CONFIG_PPC_BOOK3E
+	addi	r12,r13,PACA_EXTLB	/* and TLB exc frame in another  */
+	mtspr	SPRN_SPRG_TLB_EXFRAME,r12
+#endif
+
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 3:	HMT_LOW
@@ -231,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init)
  * Turn the MMU off.
  * Assumes we're mapped EA == RA if the MMU is on.
  */
+#ifdef CONFIG_PPC_BOOK3S
 _STATIC(__mmu_off)
 	mfmsr	r3
 	andi.	r0,r3,MSR_IR|MSR_DR
@@ -242,6 +278,7 @@ _STATIC(__mmu_off)
 	sync
 	rfid
 	b	.	/* prevent speculative execution */
+#endif
 
 
 /*
@@ -279,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform)
 	mr	r31,r3
 	mr	r30,r4
 
+#ifdef CONFIG_PPC_BOOK3E
+	bl	.start_initialization_book3e
+	b	.__after_prom_start
+#else
 	/* Setup some critical 970 SPRs before switching MMU off */
 	mfspr	r0,SPRN_PVR
 	srwi	r0,r0,16
@@ -296,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform)
 	/* Switch off MMU if not already off */
 	bl	.__mmu_off
 	b	.__after_prom_start
+#endif /* CONFIG_PPC_BOOK3E */
 
 _INIT_STATIC(__boot_from_prom)
 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
@@ -358,10 +400,16 @@ _STATIC(__after_prom_start)
  * Note: This process overwrites the OF exception vectors.
  */
 	li	r3,0			/* target addr */
+#ifdef CONFIG_PPC_BOOK3E
+	tovirt(r3,r3)			/* on booke, we already run at PAGE_OFFSET */
+#endif
 	mr.	r4,r26			/* In some cases the loader may  */
 	beq	9f			/* have already put us at zero */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
+#ifdef CONFIG_PPC_BOOK3E
+	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
+#endif
 
 #ifdef CONFIG_CRASH_DUMP
 /*
@@ -507,6 +555,9 @@ _GLOBAL(pmac_secondary_start)
  *   r13       = paca virtual address
  *   SPRG_PACA = paca virtual address
  */
+	.section ".text";
+	.align 2 ;
+
 	.globl	__secondary_start
 __secondary_start:
 	/* Set thread priority to MEDIUM */
@@ -543,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 
 /* 
@@ -564,11 +615,16 @@ _GLOBAL(start_secondary_prolog)
  */
 _GLOBAL(enable_64b_mode)
 	mfmsr	r11			/* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3E
+	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
+	mtmsr	r11
+#else /* CONFIG_PPC_BOOK3E */
 	li	r12,(MSR_SF | MSR_ISF)@highest
 	sldi	r12,r12,48
 	or	r11,r11,r12
 	mtmsrd	r11
 	isync
+#endif
 	blr
 
 /*
@@ -612,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform)
 	bdnz	3b
 4:
 
+#ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r6
 	ori	r6,r6,MSR_RI
 	mtmsrd	r6			/* RI on */
+#endif
 
 #ifdef CONFIG_RELOCATABLE
 	/* Save the physical address we're running at in kernstart_addr */
@@ -647,7 +705,7 @@ _INIT_STATIC(start_here_multiplatform)
 	ld	r4,PACAKMSR(r13)
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 	
 	/* This is where all platforms converge execution */

arch/powerpc/kernel/setup_64.c

@@ -454,6 +454,24 @@ static void __init irqstack_early_init(void)
 #define irqstack_early_init()
 #endif
 
+#ifdef CONFIG_PPC_BOOK3E
+static void __init exc_lvl_early_init(void)
+{
+	unsigned int i;
+
+	for_each_possible_cpu(i) {
+		critirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		dbgirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		mcheckirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+	}
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
 /*
  * Stack space used when we detect a bad kernel stack pointer, and
  * early in SMP boots before relocation is enabled.
@@ -513,6 +531,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.brk = klimit;
 	
 	irqstack_early_init();
+	exc_lvl_early_init();
 	emergency_stack_init();
 
 #ifdef CONFIG_PPC_STD_MMU_64

arch/powerpc/mm/Makefile

@@ -13,6 +13,7 @@ obj-y				:= fault.o mem.o pgtable.o gup.o \
 				   pgtable_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 				   tlb_nohash_low.o
+obj-$(CONFIG_PPC_BOOK3E)	+= tlb_low_$(CONFIG_WORD_SIZE)e.o
 obj-$(CONFIG_PPC64)		+= mmap_64.o
 hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= hash_utils_64.o \

arch/powerpc/platforms/Kconfig.cputype

@@ -57,15 +57,35 @@ config E200
 
 endchoice
 
-config PPC_BOOK3S_64
-	def_bool y
+choice
+	prompt "Processor Type"
 	depends on PPC64
+	help
+	  There are two families of 64 bit PowerPC chips supported.
+	  The most common ones are the desktop and server CPUs
+	  (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...)
+
+	  The other are the "embedded" processors compliant with the
+	  "Book 3E" variant of the architecture
+
+config PPC_BOOK3S_64
+	bool "Server processors"
 	select PPC_FPU
 
+config PPC_BOOK3E_64
+	bool "Embedded processors"
+	select PPC_FPU # Make it a choice ?
+
+endchoice
+
 config PPC_BOOK3S
 	def_bool y
 	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
 
+config PPC_BOOK3E
+	def_bool y
+	depends on PPC_BOOK3E_64
+
 config POWER4_ONLY
 	bool "Optimize for POWER4"
 	depends on PPC64 && PPC_BOOK3S
@@ -125,7 +145,7 @@ config 4xx
 
 config BOOKE
 	bool
-	depends on E200 || E500 || 44x
+	depends on E200 || E500 || 44x || PPC_BOOK3E
 	default y
 
 config FSL_BOOKE
@@ -223,9 +243,17 @@ config PPC_MMU_NOHASH
 	def_bool y
 	depends on !PPC_STD_MMU
 
+config PPC_MMU_NOHASH_32
+	def_bool y
+	depends on PPC_MMU_NOHASH && PPC32
+
+config PPC_MMU_NOHASH_64
+	def_bool y
+	depends on PPC_MMU_NOHASH && PPC64
+
 config PPC_BOOK3E_MMU
 	def_bool y
-	depends on FSL_BOOKE
+	depends on FSL_BOOKE || PPC_BOOK3E
 
 config PPC_MM_SLICES
 	bool
@@ -257,7 +285,7 @@ config PPC_PERF_CTRS
          This enables the powerpc-specific perf_counter back-end.
 
 config SMP
-	depends on PPC_STD_MMU || FSL_BOOKE
+	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have

arch/powerpc/xmon/xmon.c

@@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 	printf("%s", after);
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 static void dump_slb(void)
 {
 	int i;