drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it

The A2Q (Add To Queue) and UPDATE bits are left in their previous state
when resetting the layer.
This lead to weird behavior when enabling the plane again: the framebuffer
previously queued is dequeued and we end up with access to an old memory
region.

Reset those bits when resetting the channel.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
上级 5b49afd6
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -311,7 +311,8 @@ int atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer)
/* Disable the layer */
regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
ATMEL_HLCDC_LAYER_RST);
ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q |
ATMEL_HLCDC_LAYER_UPDATE);
/* Clear all pending interrupts */
regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部