serial: 8250_pci: remove rts_n override from Baytrail quirk

It should not be used together with Auto Flow Control, and
Auto Flow Control is always enabled on Baytrail.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250_pci.c

@@ -1355,9 +1355,6 @@ ce4100_serial_setup(struct serial_private *priv,
 #define BYT_PRV_CLK_N_VAL_SHIFT		16
 #define BYT_PRV_CLK_UPDATE		(1 << 31)
 
-#define BYT_GENERAL_REG			0x808
-#define BYT_GENERAL_DIS_RTS_N_OVERRIDE	(1 << 3)
-
 #define BYT_TX_OVF_INT			0x820
 #define BYT_TX_OVF_INT_MASK		(1 << 1)
 
@@ -1412,16 +1409,6 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
 	reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
 	writel(reg, p->membase + BYT_PRV_CLK);
 
-	/*
-	 * If auto-handshake mechanism is not enabled,
-	 * disable rts_n override
-	 */
-	reg = readl(p->membase + BYT_GENERAL_REG);
-	reg &= ~BYT_GENERAL_DIS_RTS_N_OVERRIDE;
-	if (termios->c_cflag & CRTSCTS)
-		reg |= BYT_GENERAL_DIS_RTS_N_OVERRIDE;
-	writel(reg, p->membase + BYT_GENERAL_REG);
-
 	serial8250_do_set_termios(p, termios, old);
 }