提交 1f1cf8f9 编写于 作者: H Haojian Zhuang 提交者: Samuel Ortiz

mfd: Update irq handler in max8925

Update thread irq handler. Simply the interface of using thread irq.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
上级 b13c0df5
......@@ -204,8 +204,8 @@ config PMIC_ADP5520
under the corresponding menus.
config MFD_MAX8925
tristate "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
......
此差异已折叠。
......@@ -12,6 +12,7 @@
#ifndef __LINUX_MFD_MAX8925_H
#define __LINUX_MFD_MAX8925_H
#include <linux/mutex.h>
#include <linux/interrupt.h>
/* Unified sub device IDs for MAX8925 */
......@@ -39,6 +40,30 @@ enum {
MAX8925_ID_LDO18,
MAX8925_ID_LDO19,
MAX8925_ID_LDO20,
MAX8925_ID_MAX,
};
enum {
/*
* Charging current threshold trigger going from fast charge
* to TOPOFF charge. From 5% to 20% of fasting charging current.
*/
MAX8925_TOPOFF_THR_5PER,
MAX8925_TOPOFF_THR_10PER,
MAX8925_TOPOFF_THR_15PER,
MAX8925_TOPOFF_THR_20PER,
};
enum {
/* Fast charging current */
MAX8925_FCHG_85MA,
MAX8925_FCHG_300MA,
MAX8925_FCHG_460MA,
MAX8925_FCHG_600MA,
MAX8925_FCHG_700MA,
MAX8925_FCHG_800MA,
MAX8925_FCHG_900MA,
MAX8925_FCHG_1000MA,
};
/* Charger registers */
......@@ -46,12 +71,13 @@ enum {
#define MAX8925_CHG_IRQ2 (0x7f)
#define MAX8925_CHG_IRQ1_MASK (0x80)
#define MAX8925_CHG_IRQ2_MASK (0x81)
#define MAX8925_CHG_STATUS (0x82)
/* GPM registers */
#define MAX8925_SYSENSEL (0x00)
#define MAX8925_ON_OFF_IRQ1 (0x01)
#define MAX8925_ON_OFF_IRQ1_MASK (0x02)
#define MAX8925_ON_OFF_STAT (0x03)
#define MAX8925_ON_OFF_STATUS (0x03)
#define MAX8925_ON_OFF_IRQ2 (0x0d)
#define MAX8925_ON_OFF_IRQ2_MASK (0x0e)
#define MAX8925_RESET_CNFG (0x0f)
......@@ -59,12 +85,18 @@ enum {
/* Touch registers */
#define MAX8925_TSC_IRQ (0x00)
#define MAX8925_TSC_IRQ_MASK (0x01)
#define MAX8925_TSC_CNFG1 (0x02)
#define MAX8925_ADC_SCHED (0x10)
#define MAX8925_ADC_RES_END (0x6f)
#define MAX8925_NREF_OK (1 << 4)
/* RTC registers */
#define MAX8925_RTC_STATUS (0x1a)
#define MAX8925_ALARM0_CNTL (0x18)
#define MAX8925_ALARM1_CNTL (0x19)
#define MAX8925_RTC_IRQ (0x1c)
#define MAX8925_RTC_IRQ_MASK (0x1d)
#define MAX8925_MPL_CNTL (0x1e)
/* WLED registers */
#define MAX8925_WLED_MODE_CNTL (0x84)
......@@ -126,45 +158,48 @@ enum {
#define TSC_IRQ_MASK (0x03)
#define RTC_IRQ_MASK (0x0c)
#define MAX8925_NUM_IRQ (32)
#define MAX8925_GPM_NUM_IRQ (40)
#define MAX8925_ADC_NUM_IRQ (8)
#define MAX8925_NUM_IRQ (MAX8925_GPM_NUM_IRQ \
+ MAX8925_ADC_NUM_IRQ)
#define MAX8925_MAX_REGULATOR (23)
#define MAX8925_NAME_SIZE (32)
/* IRQ definitions */
enum {
MAX8925_INVALID = 0,
MAX8925_RTC,
MAX8925_ADC,
MAX8925_GPM, /* general power management */
MAX8925_MAX,
MAX8925_IRQ_VCHG_DC_OVP,
MAX8925_IRQ_VCHG_DC_F,
MAX8925_IRQ_VCHG_DC_R,
MAX8925_IRQ_VCHG_USB_OVP,
MAX8925_IRQ_VCHG_USB_F,
MAX8925_IRQ_VCHG_USB_R,
MAX8925_IRQ_VCHG_THM_OK_R,
MAX8925_IRQ_VCHG_THM_OK_F,
MAX8925_IRQ_VCHG_SYSLOW_F,
MAX8925_IRQ_VCHG_SYSLOW_R,
MAX8925_IRQ_VCHG_RST,
MAX8925_IRQ_VCHG_DONE,
MAX8925_IRQ_VCHG_TOPOFF,
MAX8925_IRQ_VCHG_TMR_FAULT,
MAX8925_IRQ_GPM_RSTIN,
MAX8925_IRQ_GPM_MPL,
MAX8925_IRQ_GPM_SW_3SEC,
MAX8925_IRQ_GPM_EXTON_F,
MAX8925_IRQ_GPM_EXTON_R,
MAX8925_IRQ_GPM_SW_1SEC,
MAX8925_IRQ_GPM_SW_F,
MAX8925_IRQ_GPM_SW_R,
MAX8925_IRQ_GPM_SYSCKEN_F,
MAX8925_IRQ_GPM_SYSCKEN_R,
MAX8925_IRQ_RTC_ALARM1,
MAX8925_IRQ_RTC_ALARM0,
MAX8925_IRQ_TSC_STICK,
MAX8925_IRQ_TSC_NSTICK,
MAX8925_NR_IRQS,
};
#define MAX8925_IRQ_VCHG_OVP (0)
#define MAX8925_IRQ_VCHG_F (1)
#define MAX8925_IRQ_VCHG_R (2)
#define MAX8925_IRQ_VCHG_THM_OK_R (8)
#define MAX8925_IRQ_VCHG_THM_OK_F (9)
#define MAX8925_IRQ_VCHG_BATTLOW_F (10)
#define MAX8925_IRQ_VCHG_BATTLOW_R (11)
#define MAX8925_IRQ_VCHG_RST (12)
#define MAX8925_IRQ_VCHG_DONE (13)
#define MAX8925_IRQ_VCHG_TOPOFF (14)
#define MAX8925_IRQ_VCHG_TMR_FAULT (15)
#define MAX8925_IRQ_GPM_RSTIN (16)
#define MAX8925_IRQ_GPM_MPL (17)
#define MAX8925_IRQ_GPM_SW_3SEC (18)
#define MAX8925_IRQ_GPM_EXTON_F (19)
#define MAX8925_IRQ_GPM_EXTON_R (20)
#define MAX8925_IRQ_GPM_SW_1SEC (21)
#define MAX8925_IRQ_GPM_SW_F (22)
#define MAX8925_IRQ_GPM_SW_R (23)
#define MAX8925_IRQ_GPM_SYSCKEN_F (24)
#define MAX8925_IRQ_GPM_SYSCKEN_R (25)
#define MAX8925_IRQ_TSC_STICK (0)
#define MAX8925_IRQ_TSC_NSTICK (1)
#define MAX8925_MAX_REGULATOR (23)
struct max8925_irq {
irq_handler_t handler;
void *data;
......@@ -172,14 +207,16 @@ struct max8925_irq {
struct max8925_chip {
struct device *dev;
struct i2c_client *i2c;
struct i2c_client *adc;
struct i2c_client *rtc;
struct max8925_irq irqs[MAX8925_NUM_IRQ];
struct mutex io_lock;
struct mutex irq_lock;
struct i2c_client *i2c;
struct max8925_irq irq[MAX8925_NUM_IRQ];
const char *name;
int chip_id;
int chip_irq;
int irq_base;
int core_irq;
int tsc_irq;
};
struct max8925_backlight_pdata {
......@@ -192,13 +229,25 @@ struct max8925_touch_pdata {
unsigned int flags;
};
struct max8925_power_pdata {
int (*set_charger)(int);
unsigned batt_detect:1;
unsigned topoff_threshold:2;
unsigned fast_charge:3; /* charge current */
};
/*
* irq_base: stores IRQ base number of MAX8925 in platform
* tsc_irq: stores IRQ number of MAX8925 TSC
*/
struct max8925_platform_data {
struct max8925_backlight_pdata *backlight;
struct max8925_touch_pdata *touch;
struct max8925_power_pdata *power;
struct regulator_init_data *regulator[MAX8925_MAX_REGULATOR];
int chip_id;
int chip_irq;
int irq_base;
int tsc_irq;
};
extern int max8925_reg_read(struct i2c_client *, int);
......@@ -208,6 +257,12 @@ extern int max8925_bulk_write(struct i2c_client *, int, int, unsigned char *);
extern int max8925_set_bits(struct i2c_client *, int, unsigned char,
unsigned char);
extern int max8925_request_irq(struct max8925_chip *, int,
irq_handler_t, void *);
extern int max8925_free_irq(struct max8925_chip *, int);
extern int max8925_mask_irq(struct max8925_chip *, int);
extern int max8925_unmask_irq(struct max8925_chip *, int);
extern int max8925_device_init(struct max8925_chip *,
struct max8925_platform_data *);
extern void max8925_device_exit(struct max8925_chip *);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册