atl1.c 98.8 KB
Newer Older
J
Jay Cliburn 已提交
1 2
/*
 * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
3
 * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
J
Jay Cliburn 已提交
4
 * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
J
Jay Cliburn 已提交
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 * The full GNU General Public License is included in this distribution in the
 * file called COPYING.
 *
 * Contact Information:
J
Jay Cliburn 已提交
27 28
 * Xiong Huang <xiong.huang@atheros.com>
 * Jie Yang <jie.yang@atheros.com>
J
Jay Cliburn 已提交
29 30 31
 * Chris Snook <csnook@redhat.com>
 * Jay Cliburn <jcliburn@gmail.com>
 *
J
Jay Cliburn 已提交
32
 * This version is adapted from the Attansic reference driver.
J
Jay Cliburn 已提交
33 34
 *
 * TODO:
J
Jay Cliburn 已提交
35
 * Add more ethtool functions.
J
Jay Cliburn 已提交
36 37 38 39 40 41 42 43 44 45 46
 * Fix abstruse irq enable/disable condition described here:
 *	http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
 *
 * NEEDS TESTING:
 * VLAN
 * multicast
 * promiscuous mode
 * interrupt coalescing
 * SMP torture testing
 */

47 48 49 50 51 52 53
#include <asm/atomic.h>
#include <asm/byteorder.h>

#include <linux/compiler.h>
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
J
Jay Cliburn 已提交
54 55
#include <linux/etherdevice.h>
#include <linux/hardirq.h>
56 57 58
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
J
Jay Cliburn 已提交
59
#include <linux/interrupt.h>
60
#include <linux/ip.h>
J
Jay Cliburn 已提交
61
#include <linux/irqflags.h>
62 63 64 65 66
#include <linux/irqreturn.h>
#include <linux/jiffies.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
J
Jay Cliburn 已提交
67
#include <linux/net.h>
68 69 70
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
J
Jay Cliburn 已提交
71
#include <linux/pm.h>
72 73 74 75
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
J
Jay Cliburn 已提交
76
#include <linux/tcp.h>
77 78 79
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/workqueue.h>
J
Jay Cliburn 已提交
80 81 82 83 84

#include <net/checksum.h>

#include "atl1.h"

85 86
#define ATLX_DRIVER_VERSION "2.1.3"
MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
87
Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
88 89 90
MODULE_LICENSE("GPL");
MODULE_VERSION(ATLX_DRIVER_VERSION);

91 92
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
J
Jay Cliburn 已提交
93

94 95
static const struct ethtool_ops atl1_ethtool_ops;

96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115
/*
 * This is the only thing that needs to be changed to adjust the
 * maximum number of ports that the driver can manage.
 */
#define ATL1_MAX_NIC 4

#define OPTION_UNSET    -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED  1

#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }

/*
 * Interrupt Moderate Timer in units of 2 us
 *
 * Valid Range: 10-65535
 *
 * Default Value: 100 (200us)
 */
static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
116
static unsigned int num_int_mod_timer;
117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205
module_param_array_named(int_mod_timer, int_mod_timer, int,
	&num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");

#define DEFAULT_INT_MOD_CNT	100	/* 200us */
#define MAX_INT_MOD_CNT		65000
#define MIN_INT_MOD_CNT		50

struct atl1_option {
	enum { enable_option, range_option, list_option } type;
	char *name;
	char *err;
	int def;
	union {
		struct {	/* range_option info */
			int min;
			int max;
		} r;
		struct {	/* list_option info */
			int nr;
			struct atl1_opt_list {
				int i;
				char *str;
			} *p;
		} l;
	} arg;
};

static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
	struct pci_dev *pdev)
{
	if (*value == OPTION_UNSET) {
		*value = opt->def;
		return 0;
	}

	switch (opt->type) {
	case enable_option:
		switch (*value) {
		case OPTION_ENABLED:
			dev_info(&pdev->dev, "%s enabled\n", opt->name);
			return 0;
		case OPTION_DISABLED:
			dev_info(&pdev->dev, "%s disabled\n", opt->name);
			return 0;
		}
		break;
	case range_option:
		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
			dev_info(&pdev->dev, "%s set to %i\n", opt->name,
				*value);
			return 0;
		}
		break;
	case list_option:{
			int i;
			struct atl1_opt_list *ent;

			for (i = 0; i < opt->arg.l.nr; i++) {
				ent = &opt->arg.l.p[i];
				if (*value == ent->i) {
					if (ent->str[0] != '\0')
						dev_info(&pdev->dev, "%s\n",
							ent->str);
					return 0;
				}
			}
		}
		break;

	default:
		break;
	}

	dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
		opt->name, *value, opt->err);
	*value = opt->def;
	return -1;
}

/*
 * atl1_check_options - Range Checking for Command Line Parameters
 * @adapter: board private structure
 *
 * This routine checks all command line parameters for valid user
 * input.  If an invalid value is given, or if no user specified
 * value exists, a default value is used.  The final value is stored
 * in a variable in the adapter structure.
 */
206
static void __devinit atl1_check_options(struct atl1_adapter *adapter)
207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233
{
	struct pci_dev *pdev = adapter->pdev;
	int bd = adapter->bd_number;
	if (bd >= ATL1_MAX_NIC) {
		dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
		dev_notice(&pdev->dev, "using defaults for all values\n");
	}
	{			/* Interrupt Moderate Timer */
		struct atl1_option opt = {
			.type = range_option,
			.name = "Interrupt Moderator Timer",
			.err = "using default of "
				__MODULE_STRING(DEFAULT_INT_MOD_CNT),
			.def = DEFAULT_INT_MOD_CNT,
			.arg = {.r = {.min = MIN_INT_MOD_CNT,
					.max = MAX_INT_MOD_CNT} }
		};
		int val;
		if (num_int_mod_timer > bd) {
			val = int_mod_timer[bd];
			atl1_validate_option(&val, &opt, pdev);
			adapter->imt = (u16) val;
		} else
			adapter->imt = (u16) (opt.def);
	}
}

J
Jay Cliburn 已提交
234 235 236
/*
 * atl1_pci_tbl - PCI Device ID Table
 */
237
static DEFINE_PCI_DEVICE_TABLE(atl1_pci_tbl) = {
238
	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
J
Jay Cliburn 已提交
239 240 241 242 243
	/* required last entry */
	{0,}
};
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);

J
Jay Cliburn 已提交
244 245 246 247 248 249 250
static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
	NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;

static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");

J
Jay Cliburn 已提交
251
/*
J
Jay Cliburn 已提交
252 253 254
 * Reset the transmit and receive units; mask and clear all interrupts.
 * hw - Struct containing variables accessed by shared code
 * return : 0  or  idle status (if error)
J
Jay Cliburn 已提交
255
 */
J
Jay Cliburn 已提交
256
static s32 atl1_reset_hw(struct atl1_hw *hw)
J
Jay Cliburn 已提交
257
{
J
Jay Cliburn 已提交
258 259 260 261
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	u32 icr;
	int i;
J
Jay Cliburn 已提交
262

J
Jay Cliburn 已提交
263 264 265 266 267 268 269 270
	/*
	 * Clear Interrupt mask to stop board from generating
	 * interrupts & Clear any pending interrupt events
	 */
	/*
	 * iowrite32(0, hw->hw_addr + REG_IMR);
	 * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
	 */
J
Jay Cliburn 已提交
271

J
Jay Cliburn 已提交
272 273 274 275 276 277 278 279
	/*
	 * Issue Soft Reset to the MAC.  This will reset the chip's
	 * transmit, receive, DMA.  It will not effect
	 * the current PCI configuration.  The global reset bit is self-
	 * clearing, and should clear within a microsecond.
	 */
	iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
	ioread32(hw->hw_addr + REG_MASTER_CTRL);
J
Jay Cliburn 已提交
280

J
Jay Cliburn 已提交
281 282
	iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
	ioread16(hw->hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
283

J
Jay Cliburn 已提交
284 285
	/* delay about 1ms */
	msleep(1);
J
Jay Cliburn 已提交
286

J
Jay Cliburn 已提交
287 288 289 290 291 292 293 294 295 296
	/* Wait at least 10ms for All module to be Idle */
	for (i = 0; i < 10; i++) {
		icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
		if (!icr)
			break;
		/* delay 1 ms */
		msleep(1);
		/* FIXME: still the right way to do this? */
		cpu_relax();
	}
J
Jay Cliburn 已提交
297

J
Jay Cliburn 已提交
298 299 300 301 302
	if (icr) {
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
		return icr;
	}
J
Jay Cliburn 已提交
303

J
Jay Cliburn 已提交
304
	return 0;
J
Jay Cliburn 已提交
305 306
}

J
Jay Cliburn 已提交
307 308 309 310 311 312
/* function about EEPROM
 *
 * check_eeprom_exist
 * return 0 if eeprom exist
 */
static int atl1_check_eeprom_exist(struct atl1_hw *hw)
J
Jay Cliburn 已提交
313
{
J
Jay Cliburn 已提交
314 315 316 317 318 319
	u32 value;
	value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
	if (value & SPI_FLASH_CTRL_EN_VPD) {
		value &= ~SPI_FLASH_CTRL_EN_VPD;
		iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
	}
J
Jay Cliburn 已提交
320

J
Jay Cliburn 已提交
321 322
	value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
	return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
J
Jay Cliburn 已提交
323 324
}

J
Jay Cliburn 已提交
325
static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
J
Jay Cliburn 已提交
326
{
J
Jay Cliburn 已提交
327 328
	int i;
	u32 control;
J
Jay Cliburn 已提交
329

J
Jay Cliburn 已提交
330 331 332
	if (offset & 3)
		/* address do not align */
		return false;
J
Jay Cliburn 已提交
333

J
Jay Cliburn 已提交
334 335 336 337
	iowrite32(0, hw->hw_addr + REG_VPD_DATA);
	control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
	iowrite32(control, hw->hw_addr + REG_VPD_CAP);
	ioread32(hw->hw_addr + REG_VPD_CAP);
J
Jay Cliburn 已提交
338

J
Jay Cliburn 已提交
339 340 341 342 343 344 345 346 347 348 349 350
	for (i = 0; i < 10; i++) {
		msleep(2);
		control = ioread32(hw->hw_addr + REG_VPD_CAP);
		if (control & VPD_CAP_VPD_FLAG)
			break;
	}
	if (control & VPD_CAP_VPD_FLAG) {
		*p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
		return true;
	}
	/* timeout */
	return false;
J
Jay Cliburn 已提交
351 352
}

J
Jay Cliburn 已提交
353
/*
J
Jay Cliburn 已提交
354 355 356
 * Reads the value from a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
J
Jay Cliburn 已提交
357
 */
358
static s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
J
Jay Cliburn 已提交
359
{
J
Jay Cliburn 已提交
360 361
	u32 val;
	int i;
J
Jay Cliburn 已提交
362

J
Jay Cliburn 已提交
363 364 365 366 367
	val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
		MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
		MDIO_CLK_SEL_SHIFT;
	iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
	ioread32(hw->hw_addr + REG_MDIO_CTRL);
J
Jay Cliburn 已提交
368

J
Jay Cliburn 已提交
369 370 371 372 373 374 375 376 377
	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
	}
	if (!(val & (MDIO_START | MDIO_BUSY))) {
		*phy_data = (u16) val;
		return 0;
J
Jay Cliburn 已提交
378
	}
J
Jay Cliburn 已提交
379 380
	return ATLX_ERR_PHY;
}
J
Jay Cliburn 已提交
381

J
Jay Cliburn 已提交
382 383 384 385 386
#define CUSTOM_SPI_CS_SETUP	2
#define CUSTOM_SPI_CLK_HI	2
#define CUSTOM_SPI_CLK_LO	2
#define CUSTOM_SPI_CS_HOLD	2
#define CUSTOM_SPI_CS_HI	3
J
Jay Cliburn 已提交
387

J
Jay Cliburn 已提交
388 389 390 391
static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
{
	int i;
	u32 value;
J
Jay Cliburn 已提交
392

J
Jay Cliburn 已提交
393 394
	iowrite32(0, hw->hw_addr + REG_SPI_DATA);
	iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
395

J
Jay Cliburn 已提交
396 397 398 399 400 401 402 403 404 405 406 407
	value = SPI_FLASH_CTRL_WAIT_READY |
	    (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
	    SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
					     SPI_FLASH_CTRL_CLK_HI_MASK) <<
	    SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
					   SPI_FLASH_CTRL_CLK_LO_MASK) <<
	    SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
					   SPI_FLASH_CTRL_CS_HOLD_MASK) <<
	    SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
					    SPI_FLASH_CTRL_CS_HI_MASK) <<
	    SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
	    SPI_FLASH_CTRL_INS_SHIFT;
J
Jay Cliburn 已提交
408

J
Jay Cliburn 已提交
409
	iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
J
Jay Cliburn 已提交
410

J
Jay Cliburn 已提交
411 412 413
	value |= SPI_FLASH_CTRL_START;
	iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
	ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
J
Jay Cliburn 已提交
414

J
Jay Cliburn 已提交
415 416 417 418 419 420
	for (i = 0; i < 10; i++) {
		msleep(1);
		value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
		if (!(value & SPI_FLASH_CTRL_START))
			break;
	}
J
Jay Cliburn 已提交
421

J
Jay Cliburn 已提交
422 423
	if (value & SPI_FLASH_CTRL_START)
		return false;
J
Jay Cliburn 已提交
424

J
Jay Cliburn 已提交
425
	*buf = ioread32(hw->hw_addr + REG_SPI_DATA);
426

J
Jay Cliburn 已提交
427
	return true;
J
Jay Cliburn 已提交
428 429 430
}

/*
J
Jay Cliburn 已提交
431 432
 * get_permanent_address
 * return 0 if get valid mac address,
J
Jay Cliburn 已提交
433
 */
J
Jay Cliburn 已提交
434
static int atl1_get_permanent_address(struct atl1_hw *hw)
J
Jay Cliburn 已提交
435
{
J
Jay Cliburn 已提交
436 437 438 439 440
	u32 addr[2];
	u32 i, control;
	u16 reg;
	u8 eth_addr[ETH_ALEN];
	bool key_valid;
J
Jay Cliburn 已提交
441

J
Jay Cliburn 已提交
442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469
	if (is_valid_ether_addr(hw->perm_mac_addr))
		return 0;

	/* init */
	addr[0] = addr[1] = 0;

	if (!atl1_check_eeprom_exist(hw)) {
		reg = 0;
		key_valid = false;
		/* Read out all EEPROM content */
		i = 0;
		while (1) {
			if (atl1_read_eeprom(hw, i + 0x100, &control)) {
				if (key_valid) {
					if (reg == REG_MAC_STA_ADDR)
						addr[0] = control;
					else if (reg == (REG_MAC_STA_ADDR + 4))
						addr[1] = control;
					key_valid = false;
				} else if ((control & 0xff) == 0x5A) {
					key_valid = true;
					reg = (u16) (control >> 16);
				} else
					break;
			} else
				/* read error */
				break;
			i += 4;
J
Jay Cliburn 已提交
470
		}
J
Jay Cliburn 已提交
471 472 473 474 475 476

		*(u32 *) &eth_addr[2] = swab32(addr[0]);
		*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
		if (is_valid_ether_addr(eth_addr)) {
			memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
			return 0;
J
Jay Cliburn 已提交
477 478
		}
	}
J
Jay Cliburn 已提交
479

J
Jay Cliburn 已提交
480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503
	/* see if SPI FLAGS exist ? */
	addr[0] = addr[1] = 0;
	reg = 0;
	key_valid = false;
	i = 0;
	while (1) {
		if (atl1_spi_read(hw, i + 0x1f000, &control)) {
			if (key_valid) {
				if (reg == REG_MAC_STA_ADDR)
					addr[0] = control;
				else if (reg == (REG_MAC_STA_ADDR + 4))
					addr[1] = control;
				key_valid = false;
			} else if ((control & 0xff) == 0x5A) {
				key_valid = true;
				reg = (u16) (control >> 16);
			} else
				/* data end */
				break;
		} else
			/* read error */
			break;
		i += 4;
	}
J
Jay Cliburn 已提交
504

J
Jay Cliburn 已提交
505 506 507 508 509 510
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}
J
Jay Cliburn 已提交
511

J
Jay Cliburn 已提交
512 513 514 515 516 517 518 519 520 521 522 523 524 525
	/*
	 * On some motherboards, the MAC address is written by the
	 * BIOS directly to the MAC register during POST, and is
	 * not stored in eeprom.  If all else thus far has failed
	 * to fetch the permanent MAC address, try reading it directly.
	 */
	addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
	addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}
J
Jay Cliburn 已提交
526

J
Jay Cliburn 已提交
527
	return 1;
J
Jay Cliburn 已提交
528 529
}

J
Jay Cliburn 已提交
530
/*
J
Jay Cliburn 已提交
531 532
 * Reads the adapter's MAC address from the EEPROM
 * hw - Struct containing variables accessed by shared code
J
Jay Cliburn 已提交
533
 */
534
static s32 atl1_read_mac_addr(struct atl1_hw *hw)
J
Jay Cliburn 已提交
535
{
J
Jay Cliburn 已提交
536
	u16 i;
J
Jay Cliburn 已提交
537

J
Jay Cliburn 已提交
538 539
	if (atl1_get_permanent_address(hw))
		random_ether_addr(hw->perm_mac_addr);
J
Jay Cliburn 已提交
540

J
Jay Cliburn 已提交
541 542 543
	for (i = 0; i < ETH_ALEN; i++)
		hw->mac_addr[i] = hw->perm_mac_addr[i];
	return 0;
J
Jay Cliburn 已提交
544 545 546
}

/*
J
Jay Cliburn 已提交
547 548 549
 * Hashes an address to determine its location in the multicast table
 * hw - Struct containing variables accessed by shared code
 * mc_addr - the multicast address to hash
J
Jay Cliburn 已提交
550
 *
J
Jay Cliburn 已提交
551 552 553 554 555 556
 * atl1_hash_mc_addr
 *  purpose
 *      set hash value for a multicast address
 *      hash calcu processing :
 *          1. calcu 32bit CRC for multicast address
 *          2. reverse crc with MSB to LSB
J
Jay Cliburn 已提交
557
 */
558
static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
J
Jay Cliburn 已提交
559
{
J
Jay Cliburn 已提交
560 561
	u32 crc32, value = 0;
	int i;
J
Jay Cliburn 已提交
562

J
Jay Cliburn 已提交
563 564 565
	crc32 = ether_crc_le(6, mc_addr);
	for (i = 0; i < 32; i++)
		value |= (((crc32 >> i) & 1) << (31 - i));
J
Jay Cliburn 已提交
566

J
Jay Cliburn 已提交
567
	return value;
J
Jay Cliburn 已提交
568 569
}

J
Jay Cliburn 已提交
570 571 572 573 574
/*
 * Sets the bit in the multicast table corresponding to the hash value.
 * hw - Struct containing variables accessed by shared code
 * hash_value - Multicast address hash value
 */
575
static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
J
Jay Cliburn 已提交
576
{
J
Jay Cliburn 已提交
577 578 579 580 581 582 583 584 585 586 587
	u32 hash_bit, hash_reg;
	u32 mta;

	/*
	 * The HASH Table  is a register array of 2 32-bit registers.
	 * It is treated like an array of 64 bits.  We want to set
	 * bit BitArray[hash_value]. So we figure out what register
	 * the bit is in, read it, OR in the new bit, then write
	 * back the new value.  The register is determined by the
	 * upper 7 bits of the hash value and the bit within that
	 * register are determined by the lower 5 bits of the value.
J
Jay Cliburn 已提交
588
	 */
J
Jay Cliburn 已提交
589 590 591 592 593
	hash_reg = (hash_value >> 31) & 0x1;
	hash_bit = (hash_value >> 26) & 0x1F;
	mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
	mta |= (1 << hash_bit);
	iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
J
Jay Cliburn 已提交
594
}
J
Jay Cliburn 已提交
595

J
Jay Cliburn 已提交
596 597 598 599 600 601 602
/*
 * Writes a value to a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 */
static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
J
Jay Cliburn 已提交
603
{
J
Jay Cliburn 已提交
604 605
	int i;
	u32 val;
J
Jay Cliburn 已提交
606

J
Jay Cliburn 已提交
607 608 609 610 611 612
	val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
	    (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
	    MDIO_SUP_PREAMBLE |
	    MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
	iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
	ioread32(hw->hw_addr + REG_MDIO_CTRL);
J
Jay Cliburn 已提交
613

J
Jay Cliburn 已提交
614 615 616 617 618
	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
J
Jay Cliburn 已提交
619
	}
J
Jay Cliburn 已提交
620

J
Jay Cliburn 已提交
621
	if (!(val & (MDIO_START | MDIO_BUSY)))
622
		return 0;
J
Jay Cliburn 已提交
623

J
Jay Cliburn 已提交
624 625
	return ATLX_ERR_PHY;
}
J
Jay Cliburn 已提交
626

J
Jay Cliburn 已提交
627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658
/*
 * Make L001's PHY out of Power Saving State (bug)
 * hw - Struct containing variables accessed by shared code
 * when power on, L001's PHY always on Power saving State
 * (Gigabit Link forbidden)
 */
static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
{
	s32 ret;
	ret = atl1_write_phy_reg(hw, 29, 0x0029);
	if (ret)
		return ret;
	return atl1_write_phy_reg(hw, 30, 0);
}

/*
 * Resets the PHY and make all config validate
 * hw - Struct containing variables accessed by shared code
 *
 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
 */
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
	u16 phy_data;

	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
	else {
J
Jay Cliburn 已提交
659 660
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
J
Jay Cliburn 已提交
661 662 663
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			    MII_CR_RESET;
J
Jay Cliburn 已提交
664 665 666 667 668 669 670 671
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
672 673
		default:
			/* MEDIA_TYPE_10M_HALF: */
J
Jay Cliburn 已提交
674 675
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
676 677 678
		}
	}

J
Jay Cliburn 已提交
679 680 681 682 683 684 685 686 687 688 689 690 691 692
	ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
	if (ret_val) {
		u32 val;
		int i;
		/* pcie serdes link may be down! */
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "pcie phy link down\n");

		for (i = 0; i < 25; i++) {
			msleep(1);
			val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
			if (!(val & (MDIO_START | MDIO_BUSY)))
				break;
		}
J
Jay Cliburn 已提交
693

J
Jay Cliburn 已提交
694 695 696 697 698 699 700
		if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
			if (netif_msg_hw(adapter))
				dev_warn(&pdev->dev,
					"pcie link down at least 25ms\n");
			return ret_val;
		}
	}
701
	return 0;
702 703
}

J
Jay Cliburn 已提交
704 705 706 707 708
/*
 * Configures PHY autoneg and flow control advertisement settings
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
J
Jay Cliburn 已提交
709
{
J
Jay Cliburn 已提交
710 711 712
	s32 ret_val;
	s16 mii_autoneg_adv_reg;
	s16 mii_1000t_ctrl_reg;
J
Jay Cliburn 已提交
713

J
Jay Cliburn 已提交
714 715
	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
	mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
J
Jay Cliburn 已提交
716

J
Jay Cliburn 已提交
717 718
	/* Read the MII 1000Base-T Control Register (Address 9). */
	mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
J
Jay Cliburn 已提交
719

J
Jay Cliburn 已提交
720 721 722 723 724 725 726
	/*
	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
	 * the  1000Base-T Control Register (Address 9).
	 */
	mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
	mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
J
Jay Cliburn 已提交
727

J
Jay Cliburn 已提交
728 729 730 731 732 733 734 735 736 737 738 739
	/*
	 * Need to parse media_type  and set up
	 * the appropriate PHY registers.
	 */
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
					MII_AR_10T_FD_CAPS |
					MII_AR_100TX_HD_CAPS |
					MII_AR_100TX_FD_CAPS);
		mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
		break;
J
Jay Cliburn 已提交
740

J
Jay Cliburn 已提交
741 742 743
	case MEDIA_TYPE_1000M_FULL:
		mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
		break;
J
Jay Cliburn 已提交
744

J
Jay Cliburn 已提交
745 746 747
	case MEDIA_TYPE_100M_FULL:
		mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
		break;
J
Jay Cliburn 已提交
748

J
Jay Cliburn 已提交
749 750 751
	case MEDIA_TYPE_100M_HALF:
		mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
		break;
J
Jay Cliburn 已提交
752

J
Jay Cliburn 已提交
753 754
	case MEDIA_TYPE_10M_FULL:
		mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
J
Jay Cliburn 已提交
755
		break;
J
Jay Cliburn 已提交
756

J
Jay Cliburn 已提交
757
	default:
J
Jay Cliburn 已提交
758
		mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
J
Jay Cliburn 已提交
759
		break;
J
Jay Cliburn 已提交
760 761
	}

J
Jay Cliburn 已提交
762 763
	/* flow control fixed to enable all */
	mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
J
Jay Cliburn 已提交
764

J
Jay Cliburn 已提交
765 766
	hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
	hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
J
Jay Cliburn 已提交
767

J
Jay Cliburn 已提交
768 769 770
	ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
771

J
Jay Cliburn 已提交
772 773 774
	ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
775

J
Jay Cliburn 已提交
776
	return 0;
J
Jay Cliburn 已提交
777 778
}

J
Jay Cliburn 已提交
779
/*
J
Jay Cliburn 已提交
780 781 782 783
 * Configures link settings.
 * hw - Struct containing variables accessed by shared code
 * Assumes the hardware has previously been reset and the
 * transmitter and receiver are not enabled.
J
Jay Cliburn 已提交
784
 */
J
Jay Cliburn 已提交
785
static s32 atl1_setup_link(struct atl1_hw *hw)
J
Jay Cliburn 已提交
786
{
J
Jay Cliburn 已提交
787 788 789
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
J
Jay Cliburn 已提交
790

J
Jay Cliburn 已提交
791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813
	/*
	 * Options:
	 *  PHY will advertise value(s) parsed from
	 *  autoneg_advertised and fc
	 *  no matter what autoneg is , We will not wait link result.
	 */
	ret_val = atl1_phy_setup_autoneg_adv(hw);
	if (ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&pdev->dev,
				"error setting up autonegotiation\n");
		return ret_val;
	}
	/* SW.Reset , En-Auto-Neg if needed */
	ret_val = atl1_phy_reset(hw);
	if (ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&pdev->dev, "error resetting phy\n");
		return ret_val;
	}
	hw->phy_configured = true;
	return ret_val;
}
J
Jay Cliburn 已提交
814

J
Jay Cliburn 已提交
815
static void atl1_init_flash_opcode(struct atl1_hw *hw)
J
Jay Cliburn 已提交
816
{
J
Jay Cliburn 已提交
817 818 819
	if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
		/* Atmel */
		hw->flash_vendor = 0;
J
Jay Cliburn 已提交
820

J
Jay Cliburn 已提交
821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837
	/* Init OP table */
	iowrite8(flash_table[hw->flash_vendor].cmd_program,
		hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
	iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
		hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
	iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
		hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
	iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
		hw->hw_addr + REG_SPI_FLASH_OP_RDID);
	iowrite8(flash_table[hw->flash_vendor].cmd_wren,
		hw->hw_addr + REG_SPI_FLASH_OP_WREN);
	iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
		hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
	iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
		hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
	iowrite8(flash_table[hw->flash_vendor].cmd_read,
		hw->hw_addr + REG_SPI_FLASH_OP_READ);
J
Jay Cliburn 已提交
838 839
}

J
Jay Cliburn 已提交
840 841 842 843 844 845 846 847 848
/*
 * Performs basic configuration of the adapter.
 * hw - Struct containing variables accessed by shared code
 * Assumes that the controller has previously been reset and is in a
 * post-reset uninitialized state. Initializes multicast table,
 * and  Calls routines to setup link
 * Leaves the transmit and receive units disabled and uninitialized.
 */
static s32 atl1_init_hw(struct atl1_hw *hw)
J
Jay Cliburn 已提交
849
{
J
Jay Cliburn 已提交
850
	u32 ret_val = 0;
J
Jay Cliburn 已提交
851

J
Jay Cliburn 已提交
852 853 854 855
	/* Zero out the Multicast HASH table */
	iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
	/* clear the old settings from the multicast hash table */
	iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
J
Jay Cliburn 已提交
856

J
Jay Cliburn 已提交
857
	atl1_init_flash_opcode(hw);
J
Jay Cliburn 已提交
858

J
Jay Cliburn 已提交
859 860 861 862 863 864 865 866 867 868 869 870 871
	if (!hw->phy_configured) {
		/* enable GPHY LinkChange Interrrupt */
		ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
		if (ret_val)
			return ret_val;
		/* make PHY out of power-saving state */
		ret_val = atl1_phy_leave_power_saving(hw);
		if (ret_val)
			return ret_val;
		/* Call a subroutine to configure the link */
		ret_val = atl1_setup_link(hw);
	}
	return ret_val;
J
Jay Cliburn 已提交
872 873 874
}

/*
J
Jay Cliburn 已提交
875 876 877 878
 * Detects the current speed and duplex settings of the hardware.
 * hw - Struct containing variables accessed by shared code
 * speed - Speed of the connection
 * duplex - Duplex setting of the connection
J
Jay Cliburn 已提交
879
 */
J
Jay Cliburn 已提交
880
static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
J
Jay Cliburn 已提交
881
{
J
Jay Cliburn 已提交
882 883 884 885
	struct pci_dev *pdev = hw->back->pdev;
	struct atl1_adapter *adapter = hw->back;
	s32 ret_val;
	u16 phy_data;
J
Jay Cliburn 已提交
886

J
Jay Cliburn 已提交
887 888 889 890
	/* ; --- Read   PHY Specific Status Register (17) */
	ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
891

J
Jay Cliburn 已提交
892 893
	if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
		return ATLX_ERR_PHY_RES;
J
Jay Cliburn 已提交
894

J
Jay Cliburn 已提交
895 896 897 898 899 900 901 902 903 904 905 906 907 908 909
	switch (phy_data & MII_ATLX_PSSR_SPEED) {
	case MII_ATLX_PSSR_1000MBS:
		*speed = SPEED_1000;
		break;
	case MII_ATLX_PSSR_100MBS:
		*speed = SPEED_100;
		break;
	case MII_ATLX_PSSR_10MBS:
		*speed = SPEED_10;
		break;
	default:
		if (netif_msg_hw(adapter))
			dev_dbg(&pdev->dev, "error getting speed\n");
		return ATLX_ERR_PHY_SPEED;
		break;
J
Jay Cliburn 已提交
910
	}
J
Jay Cliburn 已提交
911 912 913 914 915 916
	if (phy_data & MII_ATLX_PSSR_DPLX)
		*duplex = FULL_DUPLEX;
	else
		*duplex = HALF_DUPLEX;

	return 0;
J
Jay Cliburn 已提交
917
}
J
Jay Cliburn 已提交
918

919
static void atl1_set_mac_addr(struct atl1_hw *hw)
J
Jay Cliburn 已提交
920
{
J
Jay Cliburn 已提交
921 922 923 924 925 926 927 928 929 930 931 932 933
	u32 value;
	/*
	 * 00-0B-6A-F6-00-DC
	 * 0:  6AF600DC   1: 000B
	 * low dword
	 */
	value = (((u32) hw->mac_addr[2]) << 24) |
	    (((u32) hw->mac_addr[3]) << 16) |
	    (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
	iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
	/* high dword */
	value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
	iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
J
Jay Cliburn 已提交
934
}
J
Jay Cliburn 已提交
935 936 937 938 939 940 941 942 943 944 945 946 947 948

/*
 * atl1_sw_init - Initialize general software structures (struct atl1_adapter)
 * @adapter: board private structure to initialize
 *
 * atl1_sw_init initializes the Adapter private data structure.
 * Fields are initialized based on PCI device information and
 * OS network device settings (MTU size).
 */
static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;

J
Jay Cliburn 已提交
949
	hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
950
	hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
J
Jay Cliburn 已提交
951 952

	adapter->wol = 0;
953
	device_set_wakeup_enable(&adapter->pdev->dev, false);
J
Jay Cliburn 已提交
954
	adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
J
Jay Cliburn 已提交
955
	adapter->ict = 50000;		/* 100ms */
J
Jay Cliburn 已提交
956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994
	adapter->link_speed = SPEED_0;	/* hardware init */
	adapter->link_duplex = FULL_DUPLEX;

	hw->phy_configured = false;
	hw->preamble_len = 7;
	hw->ipgt = 0x60;
	hw->min_ifg = 0x50;
	hw->ipgr1 = 0x40;
	hw->ipgr2 = 0x60;
	hw->max_retry = 0xf;
	hw->lcol = 0x37;
	hw->jam_ipg = 7;
	hw->rfd_burst = 8;
	hw->rrd_burst = 8;
	hw->rfd_fetch_gap = 1;
	hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
	hw->rx_jumbo_lkah = 1;
	hw->rrd_ret_timer = 16;
	hw->tpd_burst = 4;
	hw->tpd_fetch_th = 16;
	hw->txf_burst = 0x100;
	hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
	hw->tpd_fetch_gap = 1;
	hw->rcb_value = atl1_rcb_64;
	hw->dma_ord = atl1_dma_ord_enh;
	hw->dmar_block = atl1_dma_req_256;
	hw->dmaw_block = atl1_dma_req_256;
	hw->cmb_rrd = 4;
	hw->cmb_tpd = 4;
	hw->cmb_rx_timer = 1;	/* about 2us */
	hw->cmb_tx_timer = 1;	/* about 2us */
	hw->smb_timer = 100000;	/* about 200ms */

	spin_lock_init(&adapter->lock);
	spin_lock_init(&adapter->mb_lock);

	return 0;
}

J
Jay Cliburn 已提交
995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034
static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	u16 result;

	atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);

	return result;
}

static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
	int val)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

	atl1_write_phy_reg(&adapter->hw, reg_num, val);
}

/*
 * atl1_mii_ioctl -
 * @netdev:
 * @ifreq:
 * @cmd:
 */
static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	unsigned long flags;
	int retval;

	if (!netif_running(netdev))
		return -EINVAL;

	spin_lock_irqsave(&adapter->lock, flags);
	retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
	spin_unlock_irqrestore(&adapter->lock, flags);

	return retval;
}

J
Jay Cliburn 已提交
1035 1036 1037 1038 1039 1040
/*
 * atl1_setup_mem_resources - allocate Tx / RX descriptor resources
 * @adapter: board private structure
 *
 * Return 0 on success, negative on failure
 */
J
Jay Cliburn 已提交
1041
static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_ring_header *ring_header = &adapter->ring_header;
	struct pci_dev *pdev = adapter->pdev;
	int size;
	u8 offset = 0;

	size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
	tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
	if (unlikely(!tpd_ring->buffer_info)) {
J
Jay Cliburn 已提交
1054 1055 1056
		if (netif_msg_drv(adapter))
			dev_err(&pdev->dev, "kzalloc failed , size = D%d\n",
				size);
J
Jay Cliburn 已提交
1057 1058 1059
		goto err_nomem;
	}
	rfd_ring->buffer_info =
J
Jay Cliburn 已提交
1060
		(struct atl1_buffer *)(tpd_ring->buffer_info + tpd_ring->count);
J
Jay Cliburn 已提交
1061

J
Jay Cliburn 已提交
1062 1063
	/*
	 * real ring DMA buffer
J
Jay Cliburn 已提交
1064 1065 1066 1067 1068 1069 1070 1071 1072 1073
	 * each ring/block may need up to 8 bytes for alignment, hence the
	 * additional 40 bytes tacked onto the end.
	 */
	ring_header->size = size =
		sizeof(struct tx_packet_desc) * tpd_ring->count
		+ sizeof(struct rx_free_desc) * rfd_ring->count
		+ sizeof(struct rx_return_desc) * rrd_ring->count
		+ sizeof(struct coals_msg_block)
		+ sizeof(struct stats_msg_block)
		+ 40;
J
Jay Cliburn 已提交
1074 1075

	ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
J
Jay Cliburn 已提交
1076
		&ring_header->dma);
J
Jay Cliburn 已提交
1077
	if (unlikely(!ring_header->desc)) {
J
Jay Cliburn 已提交
1078 1079
		if (netif_msg_drv(adapter))
			dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
J
Jay Cliburn 已提交
1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097
		goto err_nomem;
	}

	memset(ring_header->desc, 0, ring_header->size);

	/* init TPD ring */
	tpd_ring->dma = ring_header->dma;
	offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0;
	tpd_ring->dma += offset;
	tpd_ring->desc = (u8 *) ring_header->desc + offset;
	tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count;

	/* init RFD ring */
	rfd_ring->dma = tpd_ring->dma + tpd_ring->size;
	offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0;
	rfd_ring->dma += offset;
	rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset);
	rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count;
1098

J
Jay Cliburn 已提交
1099 1100 1101 1102 1103 1104 1105

	/* init RRD ring */
	rrd_ring->dma = rfd_ring->dma + rfd_ring->size;
	offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0;
	rrd_ring->dma += offset;
	rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset);
	rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count;
1106

J
Jay Cliburn 已提交
1107 1108 1109 1110 1111

	/* init CMB */
	adapter->cmb.dma = rrd_ring->dma + rrd_ring->size;
	offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0;
	adapter->cmb.dma += offset;
J
Jay Cliburn 已提交
1112 1113
	adapter->cmb.cmb = (struct coals_msg_block *)
		((u8 *) rrd_ring->desc + (rrd_ring->size + offset));
J
Jay Cliburn 已提交
1114 1115 1116 1117 1118 1119

	/* init SMB */
	adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block);
	offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0;
	adapter->smb.dma += offset;
	adapter->smb.smb = (struct stats_msg_block *)
J
Jay Cliburn 已提交
1120 1121
		((u8 *) adapter->cmb.cmb +
		(sizeof(struct coals_msg_block) + offset));
J
Jay Cliburn 已提交
1122

J
Jay Cliburn 已提交
1123
	return 0;
J
Jay Cliburn 已提交
1124 1125 1126 1127 1128 1129

err_nomem:
	kfree(tpd_ring->buffer_info);
	return -ENOMEM;
}

1130
static void atl1_init_ring_ptrs(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1131
{
1132 1133 1134
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
J
Jay Cliburn 已提交
1135

1136 1137
	atomic_set(&tpd_ring->next_to_use, 0);
	atomic_set(&tpd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1138

1139 1140 1141 1142 1143
	rfd_ring->next_to_clean = 0;
	atomic_set(&rfd_ring->next_to_use, 0);

	rrd_ring->next_to_use = 0;
	atomic_set(&rrd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1144 1145 1146
}

/*
J
Jay Cliburn 已提交
1147
 * atl1_clean_rx_ring - Free RFD Buffers
J
Jay Cliburn 已提交
1148 1149
 * @adapter: board private structure
 */
J
Jay Cliburn 已提交
1150
static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1151
{
J
Jay Cliburn 已提交
1152 1153 1154 1155 1156 1157
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_buffer *buffer_info;
	struct pci_dev *pdev = adapter->pdev;
	unsigned long size;
	unsigned int i;
J
Jay Cliburn 已提交
1158

J
Jay Cliburn 已提交
1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171
	/* Free all the Rx ring sk_buffs */
	for (i = 0; i < rfd_ring->count; i++) {
		buffer_info = &rfd_ring->buffer_info[i];
		if (buffer_info->dma) {
			pci_unmap_page(pdev, buffer_info->dma,
				buffer_info->length, PCI_DMA_FROMDEVICE);
			buffer_info->dma = 0;
		}
		if (buffer_info->skb) {
			dev_kfree_skb(buffer_info->skb);
			buffer_info->skb = NULL;
		}
	}
J
Jay Cliburn 已提交
1172

J
Jay Cliburn 已提交
1173 1174
	size = sizeof(struct atl1_buffer) * rfd_ring->count;
	memset(rfd_ring->buffer_info, 0, size);
J
Jay Cliburn 已提交
1175

J
Jay Cliburn 已提交
1176 1177
	/* Zero out the descriptor ring */
	memset(rfd_ring->desc, 0, rfd_ring->size);
J
Jay Cliburn 已提交
1178

J
Jay Cliburn 已提交
1179 1180
	rfd_ring->next_to_clean = 0;
	atomic_set(&rfd_ring->next_to_use, 0);
J
Jay Cliburn 已提交
1181

J
Jay Cliburn 已提交
1182 1183
	rrd_ring->next_to_use = 0;
	atomic_set(&rrd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1184 1185
}

J
Jay Cliburn 已提交
1186 1187 1188 1189 1190
/*
 * atl1_clean_tx_ring - Free Tx Buffers
 * @adapter: board private structure
 */
static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1191
{
J
Jay Cliburn 已提交
1192 1193
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
J
Jay Cliburn 已提交
1194
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1195 1196
	unsigned long size;
	unsigned int i;
J
Jay Cliburn 已提交
1197

J
Jay Cliburn 已提交
1198 1199 1200 1201 1202 1203 1204
	/* Free all the Tx ring sk_buffs */
	for (i = 0; i < tpd_ring->count; i++) {
		buffer_info = &tpd_ring->buffer_info[i];
		if (buffer_info->dma) {
			pci_unmap_page(pdev, buffer_info->dma,
				buffer_info->length, PCI_DMA_TODEVICE);
			buffer_info->dma = 0;
J
Jay Cliburn 已提交
1205 1206 1207
		}
	}

J
Jay Cliburn 已提交
1208 1209 1210 1211 1212
	for (i = 0; i < tpd_ring->count; i++) {
		buffer_info = &tpd_ring->buffer_info[i];
		if (buffer_info->skb) {
			dev_kfree_skb_any(buffer_info->skb);
			buffer_info->skb = NULL;
J
Jay Cliburn 已提交
1213 1214 1215
		}
	}

J
Jay Cliburn 已提交
1216 1217
	size = sizeof(struct atl1_buffer) * tpd_ring->count;
	memset(tpd_ring->buffer_info, 0, size);
J
Jay Cliburn 已提交
1218

J
Jay Cliburn 已提交
1219 1220
	/* Zero out the descriptor ring */
	memset(tpd_ring->desc, 0, tpd_ring->size);
J
Jay Cliburn 已提交
1221

J
Jay Cliburn 已提交
1222 1223
	atomic_set(&tpd_ring->next_to_use, 0);
	atomic_set(&tpd_ring->next_to_clean, 0);
J
Jay Cliburn 已提交
1224 1225 1226
}

/*
J
Jay Cliburn 已提交
1227 1228 1229 1230
 * atl1_free_ring_resources - Free Tx / RX descriptor Resources
 * @adapter: board private structure
 *
 * Free all transmit software resources
J
Jay Cliburn 已提交
1231
 */
J
Jay Cliburn 已提交
1232
static void atl1_free_ring_resources(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1233 1234
{
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1235 1236 1237 1238
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_ring_header *ring_header = &adapter->ring_header;
J
Jay Cliburn 已提交
1239

J
Jay Cliburn 已提交
1240 1241
	atl1_clean_tx_ring(adapter);
	atl1_clean_rx_ring(adapter);
J
Jay Cliburn 已提交
1242

J
Jay Cliburn 已提交
1243 1244 1245
	kfree(tpd_ring->buffer_info);
	pci_free_consistent(pdev, ring_header->size, ring_header->desc,
		ring_header->dma);
J
Jay Cliburn 已提交
1246

J
Jay Cliburn 已提交
1247 1248 1249
	tpd_ring->buffer_info = NULL;
	tpd_ring->desc = NULL;
	tpd_ring->dma = 0;
J
Jay Cliburn 已提交
1250

J
Jay Cliburn 已提交
1251 1252 1253
	rfd_ring->buffer_info = NULL;
	rfd_ring->desc = NULL;
	rfd_ring->dma = 0;
J
Jay Cliburn 已提交
1254

J
Jay Cliburn 已提交
1255 1256
	rrd_ring->desc = NULL;
	rrd_ring->dma = 0;
1257 1258 1259 1260 1261 1262

	adapter->cmb.dma = 0;
	adapter->cmb.cmb = NULL;

	adapter->smb.dma = 0;
	adapter->smb.smb = NULL;
J
Jay Cliburn 已提交
1263 1264
}

J
Jay Cliburn 已提交
1265
static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1266 1267
{
	u32 value;
J
Jay Cliburn 已提交
1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	/* Config MAC CTRL Register */
	value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
	/* duplex */
	if (FULL_DUPLEX == adapter->link_duplex)
		value |= MAC_CTRL_DUPLX;
	/* speed */
	value |= ((u32) ((SPEED_1000 == adapter->link_speed) ?
			 MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
		  MAC_CTRL_SPEED_SHIFT);
	/* flow control */
	value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
	/* PAD & CRC */
	value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
	/* preamble length */
	value |= (((u32) adapter->hw.preamble_len
		   & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
	/* vlan */
	if (adapter->vlgrp)
		value |= MAC_CTRL_RMV_VLAN;
	/* rx checksum
	   if (adapter->rx_csum)
	   value |= MAC_CTRL_RX_CHKSUM_EN;
	 */
	/* filter mode */
	value |= MAC_CTRL_BC_EN;
	if (netdev->flags & IFF_PROMISC)
		value |= MAC_CTRL_PROMIS_EN;
	else if (netdev->flags & IFF_ALLMULTI)
		value |= MAC_CTRL_MC_ALL_EN;
	/* value |= MAC_CTRL_LOOPBACK; */
	iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
}
J
Jay Cliburn 已提交
1302

J
Jay Cliburn 已提交
1303 1304 1305 1306 1307 1308 1309
static u32 atl1_check_link(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	struct net_device *netdev = adapter->netdev;
	u32 ret_val;
	u16 speed, duplex, phy_data;
	int reconfig = 0;
J
Jay Cliburn 已提交
1310

J
Jay Cliburn 已提交
1311 1312 1313
	/* MII_BMSR must read twice */
	atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
	atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
J
Jay Cliburn 已提交
1314 1315 1316 1317 1318 1319
	if (!(phy_data & BMSR_LSTATUS)) {
		/* link down */
		if (netif_carrier_ok(netdev)) {
			/* old link state: Up */
			if (netif_msg_link(adapter))
				dev_info(&adapter->pdev->dev, "link is down\n");
J
Jay Cliburn 已提交
1320 1321
			adapter->link_speed = SPEED_0;
			netif_carrier_off(netdev);
J
Jay Cliburn 已提交
1322
		}
J
Jay Cliburn 已提交
1323
		return 0;
J
Jay Cliburn 已提交
1324 1325
	}

J
Jay Cliburn 已提交
1326 1327 1328 1329
	/* Link Up */
	ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
	if (ret_val)
		return ret_val;
J
Jay Cliburn 已提交
1330

J
Jay Cliburn 已提交
1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352
	switch (hw->media_type) {
	case MEDIA_TYPE_1000M_FULL:
		if (speed != SPEED_1000 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_100M_FULL:
		if (speed != SPEED_100 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_100M_HALF:
		if (speed != SPEED_100 || duplex != HALF_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_10M_FULL:
		if (speed != SPEED_10 || duplex != FULL_DUPLEX)
			reconfig = 1;
		break;
	case MEDIA_TYPE_10M_HALF:
		if (speed != SPEED_10 || duplex != HALF_DUPLEX)
			reconfig = 1;
		break;
	}
J
Jay Cliburn 已提交
1353

J
Jay Cliburn 已提交
1354 1355
	/* link result is our setting */
	if (!reconfig) {
1356 1357
		if (adapter->link_speed != speed ||
		    adapter->link_duplex != duplex) {
J
Jay Cliburn 已提交
1358 1359 1360
			adapter->link_speed = speed;
			adapter->link_duplex = duplex;
			atl1_setup_mac_ctrl(adapter);
J
Jay Cliburn 已提交
1361 1362 1363 1364 1365 1366
			if (netif_msg_link(adapter))
				dev_info(&adapter->pdev->dev,
					"%s link is up %d Mbps %s\n",
					netdev->name, adapter->link_speed,
					adapter->link_duplex == FULL_DUPLEX ?
					"full duplex" : "half duplex");
J
Jay Cliburn 已提交
1367
		}
J
Jay Cliburn 已提交
1368 1369
		if (!netif_carrier_ok(netdev)) {
			/* Link down -> Up */
J
Jay Cliburn 已提交
1370 1371
			netif_carrier_on(netdev);
		}
J
Jay Cliburn 已提交
1372
		return 0;
J
Jay Cliburn 已提交
1373 1374
	}

J
Jay Cliburn 已提交
1375
	/* change original link status */
J
Jay Cliburn 已提交
1376 1377 1378 1379
	if (netif_carrier_ok(netdev)) {
		adapter->link_speed = SPEED_0;
		netif_carrier_off(netdev);
		netif_stop_queue(netdev);
J
Jay Cliburn 已提交
1380 1381
	}

J
Jay Cliburn 已提交
1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395
	if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR &&
	    hw->media_type != MEDIA_TYPE_1000M_FULL) {
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
			phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			           MII_CR_RESET;
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
1396 1397
		default:
			/* MEDIA_TYPE_10M_HALF: */
J
Jay Cliburn 已提交
1398 1399
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
J
Jay Cliburn 已提交
1400
		}
J
Jay Cliburn 已提交
1401
		atl1_write_phy_reg(hw, MII_BMCR, phy_data);
J
Jay Cliburn 已提交
1402
		return 0;
J
Jay Cliburn 已提交
1403 1404
	}

J
Jay Cliburn 已提交
1405 1406 1407
	/* auto-neg, insert timer to re-config phy */
	if (!adapter->phy_timer_pending) {
		adapter->phy_timer_pending = true;
S
Stephen Hemminger 已提交
1408 1409
		mod_timer(&adapter->phy_config_timer,
			  round_jiffies(jiffies + 3 * HZ));
J
Jay Cliburn 已提交
1410 1411
	}

J
Jay Cliburn 已提交
1412 1413
	return 0;
}
J
Jay Cliburn 已提交
1414

J
Jay Cliburn 已提交
1415 1416 1417
static void set_flow_ctrl_old(struct atl1_adapter *adapter)
{
	u32 hi, lo, value;
J
Jay Cliburn 已提交
1418

J
Jay Cliburn 已提交
1419 1420 1421 1422 1423 1424
	/* RFD Flow Control */
	value = adapter->rfd_ring.count;
	hi = value / 16;
	if (hi < 2)
		hi = 2;
	lo = value * 7 / 8;
J
Jay Cliburn 已提交
1425

J
Jay Cliburn 已提交
1426 1427 1428
	value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH);
J
Jay Cliburn 已提交
1429

J
Jay Cliburn 已提交
1430 1431 1432 1433 1434 1435 1436 1437 1438 1439
	/* RRD Flow Control */
	value = adapter->rrd_ring.count;
	lo = value / 16;
	hi = value * 7 / 8;
	if (lo < 2)
		lo = 2;
	value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}
J
Jay Cliburn 已提交
1440

J
Jay Cliburn 已提交
1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493
static void set_flow_ctrl_new(struct atl1_hw *hw)
{
	u32 hi, lo, value;

	/* RXF Flow Control */
	value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN);
	lo = value / 16;
	if (lo < 192)
		lo = 192;
	hi = value * 7 / 8;
	if (hi < lo)
		hi = lo + 16;
	value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH);

	/* RRD Flow Control */
	value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN);
	lo = value / 8;
	hi = value * 7 / 8;
	if (lo < 2)
		lo = 2;
	if (hi < lo)
		hi = lo + 3;
	value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
		((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}

/*
 * atl1_configure - Configure Transmit&Receive Unit after Reset
 * @adapter: board private structure
 *
 * Configure the Tx /Rx unit of the MAC after a reset.
 */
static u32 atl1_configure(struct atl1_adapter *adapter)
{
	struct atl1_hw *hw = &adapter->hw;
	u32 value;

	/* clear interrupt status */
	iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR);

	/* set MAC Address */
	value = (((u32) hw->mac_addr[2]) << 24) |
		(((u32) hw->mac_addr[3]) << 16) |
		(((u32) hw->mac_addr[4]) << 8) |
		(((u32) hw->mac_addr[5]));
	iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
	value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
	iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4));

	/* tx / rx ring */
J
Jay Cliburn 已提交
1494

J
Jay Cliburn 已提交
1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508
	/* HI base address */
	iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32),
		hw->hw_addr + REG_DESC_BASE_ADDR_HI);
	/* LO base address */
	iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_RFD_ADDR_LO);
	iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_RRD_ADDR_LO);
	iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_TPD_ADDR_LO);
	iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_CMB_ADDR_LO);
	iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL),
		hw->hw_addr + REG_DESC_SMB_ADDR_LO);
J
Jay Cliburn 已提交
1509

J
Jay Cliburn 已提交
1510 1511 1512 1513 1514 1515 1516
	/* element count */
	value = adapter->rrd_ring.count;
	value <<= 16;
	value += adapter->rfd_ring.count;
	iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE);
	iowrite32(adapter->tpd_ring.count, hw->hw_addr +
		REG_DESC_TPD_RING_SIZE);
J
Jay Cliburn 已提交
1517

J
Jay Cliburn 已提交
1518 1519
	/* Load Ptr */
	iowrite32(1, hw->hw_addr + REG_LOAD_PTR);
J
Jay Cliburn 已提交
1520

J
Jay Cliburn 已提交
1521 1522 1523 1524 1525 1526 1527 1528
	/* config Mailbox */
	value = ((atomic_read(&adapter->tpd_ring.next_to_use)
		  & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) |
		((atomic_read(&adapter->rrd_ring.next_to_clean)
		& MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) |
		((atomic_read(&adapter->rfd_ring.next_to_use)
		& MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAILBOX);
J
Jay Cliburn 已提交
1529

J
Jay Cliburn 已提交
1530 1531 1532 1533 1534 1535 1536 1537 1538 1539
	/* config IPG/IFG */
	value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK)
		 << MAC_IPG_IFG_IPGT_SHIFT) |
		(((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK)
		<< MAC_IPG_IFG_MIFG_SHIFT) |
		(((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK)
		<< MAC_IPG_IFG_IPGR1_SHIFT) |
		(((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK)
		<< MAC_IPG_IFG_IPGR2_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG);
J
Jay Cliburn 已提交
1540

J
Jay Cliburn 已提交
1541 1542 1543 1544 1545 1546 1547 1548 1549
	/* config  Half-Duplex Control */
	value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
		(((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK)
		<< MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
		MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
		(0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
		(((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK)
		<< MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
	iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL);
J
Jay Cliburn 已提交
1550

J
Jay Cliburn 已提交
1551 1552 1553
	/* set Interrupt Moderator Timer */
	iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT);
	iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL);
J
Jay Cliburn 已提交
1554

J
Jay Cliburn 已提交
1555 1556
	/* set Interrupt Clear Timer */
	iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);
J
Jay Cliburn 已提交
1557

J
Jay Cliburn 已提交
1558 1559
	/* set max frame size hw will accept */
	iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);
J
Jay Cliburn 已提交
1560

J
Jay Cliburn 已提交
1561 1562 1563 1564 1565 1566 1567 1568
	/* jumbo size & rrd retirement timer */
	value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
		 << RXQ_JMBOSZ_TH_SHIFT) |
		(((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK)
		<< RXQ_JMBO_LKAH_SHIFT) |
		(((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK)
		<< RXQ_RRD_TIMER_SHIFT);
	iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM);
J
Jay Cliburn 已提交
1569

J
Jay Cliburn 已提交
1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580
	/* Flow Control */
	switch (hw->dev_rev) {
	case 0x8001:
	case 0x9001:
	case 0x9002:
	case 0x9003:
		set_flow_ctrl_old(adapter);
		break;
	default:
		set_flow_ctrl_new(hw);
		break;
J
Jay Cliburn 已提交
1581 1582
	}

J
Jay Cliburn 已提交
1583 1584 1585 1586 1587 1588 1589 1590 1591
	/* config TXQ */
	value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK)
		 << TXQ_CTRL_TPD_BURST_NUM_SHIFT) |
		(((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK)
		<< TXQ_CTRL_TXF_BURST_NUM_SHIFT) |
		(((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK)
		<< TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE |
		TXQ_CTRL_EN;
	iowrite32(value, hw->hw_addr + REG_TXQ_CTRL);
J
Jay Cliburn 已提交
1592

J
Jay Cliburn 已提交
1593 1594 1595 1596 1597 1598
	/* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */
	value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK)
		<< TX_JUMBO_TASK_TH_SHIFT) |
		(((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK)
		<< TX_TPD_MIN_IPG_SHIFT);
	iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG);
J
Jay Cliburn 已提交
1599

J
Jay Cliburn 已提交
1600 1601 1602 1603 1604 1605 1606 1607 1608
	/* config RXQ */
	value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK)
		<< RXQ_CTRL_RFD_BURST_NUM_SHIFT) |
		(((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK)
		<< RXQ_CTRL_RRD_BURST_THRESH_SHIFT) |
		(((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK)
		<< RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN |
		RXQ_CTRL_EN;
	iowrite32(value, hw->hw_addr + REG_RXQ_CTRL);
J
Jay Cliburn 已提交
1609

J
Jay Cliburn 已提交
1610 1611 1612
	/* config DMA Engine */
	value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
		<< DMA_CTRL_DMAR_BURST_LEN_SHIFT) |
J
Jay Cliburn 已提交
1613 1614
		((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
		<< DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN |
J
Jay Cliburn 已提交
1615 1616 1617 1618 1619
		DMA_CTRL_DMAW_EN;
	value |= (u32) hw->dma_ord;
	if (atl1_rcb_128 == hw->rcb_value)
		value |= DMA_CTRL_RCB_VALUE;
	iowrite32(value, hw->hw_addr + REG_DMA_CTRL);
J
Jay Cliburn 已提交
1620

J
Jay Cliburn 已提交
1621
	/* config CMB / SMB */
J
Jay Cliburn 已提交
1622 1623 1624 1625
	value = (hw->cmb_tpd > adapter->tpd_ring.count) ?
		hw->cmb_tpd : adapter->tpd_ring.count;
	value <<= 16;
	value |= hw->cmb_rrd;
J
Jay Cliburn 已提交
1626 1627 1628 1629
	iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH);
	value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16);
	iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER);
	iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER);
J
Jay Cliburn 已提交
1630

J
Jay Cliburn 已提交
1631 1632 1633
	/* --- enable CMB / SMB */
	value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN;
	iowrite32(value, hw->hw_addr + REG_CSMB_CTRL);
J
Jay Cliburn 已提交
1634

J
Jay Cliburn 已提交
1635 1636 1637 1638 1639
	value = ioread32(adapter->hw.hw_addr + REG_ISR);
	if (unlikely((value & ISR_PHY_LINKDOWN) != 0))
		value = 1;	/* config failed */
	else
		value = 0;
J
Jay Cliburn 已提交
1640

J
Jay Cliburn 已提交
1641 1642 1643 1644
	/* clear all interrupt status */
	iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR);
	iowrite32(0, adapter->hw.hw_addr + REG_ISR);
	return value;
J
Jay Cliburn 已提交
1645 1646
}

J
Jay Cliburn 已提交
1647 1648 1649 1650
/*
 * atl1_pcie_patch - Patch for PCIE module
 */
static void atl1_pcie_patch(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1651
{
J
Jay Cliburn 已提交
1652
	u32 value;
J
Jay Cliburn 已提交
1653

J
Jay Cliburn 已提交
1654 1655 1656 1657 1658 1659 1660
	/* much vendor magic here */
	value = 0x6500;
	iowrite32(value, adapter->hw.hw_addr + 0x12FC);
	/* pcie flow control mode change */
	value = ioread32(adapter->hw.hw_addr + 0x1008);
	value |= 0x8000;
	iowrite32(value, adapter->hw.hw_addr + 0x1008);
J
Jay Cliburn 已提交
1661 1662 1663
}

/*
J
Jay Cliburn 已提交
1664 1665 1666 1667
 * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400
 * on PCI Command register is disable.
 * The function enable this bit.
 * Brackett, 2006/03/15
J
Jay Cliburn 已提交
1668
 */
J
Jay Cliburn 已提交
1669
static void atl1_via_workaround(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1670
{
J
Jay Cliburn 已提交
1671
	unsigned long value;
J
Jay Cliburn 已提交
1672

J
Jay Cliburn 已提交
1673 1674 1675 1676
	value = ioread16(adapter->hw.hw_addr + PCI_COMMAND);
	if (value & PCI_COMMAND_INTX_DISABLE)
		value &= ~PCI_COMMAND_INTX_DISABLE;
	iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
J
Jay Cliburn 已提交
1677 1678
}

J
Jay Cliburn 已提交
1679 1680
static void atl1_inc_smb(struct atl1_adapter *adapter)
{
1681
	struct net_device *netdev = adapter->netdev;
J
Jay Cliburn 已提交
1682
	struct stats_msg_block *smb = adapter->smb.smb;
J
Jay Cliburn 已提交
1683

J
Jay Cliburn 已提交
1684 1685 1686 1687 1688 1689 1690 1691
	/* Fill out the OS statistics structure */
	adapter->soft_stats.rx_packets += smb->rx_ok;
	adapter->soft_stats.tx_packets += smb->tx_ok;
	adapter->soft_stats.rx_bytes += smb->rx_byte_cnt;
	adapter->soft_stats.tx_bytes += smb->tx_byte_cnt;
	adapter->soft_stats.multicast += smb->rx_mcast;
	adapter->soft_stats.collisions += (smb->tx_1_col + smb->tx_2_col * 2 +
		smb->tx_late_col + smb->tx_abort_col * adapter->hw.max_retry);
J
Jay Cliburn 已提交
1692

J
Jay Cliburn 已提交
1693 1694 1695 1696 1697 1698 1699 1700 1701 1702
	/* Rx Errors */
	adapter->soft_stats.rx_errors += (smb->rx_frag + smb->rx_fcs_err +
		smb->rx_len_err + smb->rx_sz_ov + smb->rx_rxf_ov +
		smb->rx_rrd_ov + smb->rx_align_err);
	adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov;
	adapter->soft_stats.rx_length_errors += smb->rx_len_err;
	adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err;
	adapter->soft_stats.rx_frame_errors += smb->rx_align_err;
	adapter->soft_stats.rx_missed_errors += (smb->rx_rrd_ov +
		smb->rx_rxf_ov);
J
Jay Cliburn 已提交
1703

J
Jay Cliburn 已提交
1704 1705 1706
	adapter->soft_stats.rx_pause += smb->rx_pause;
	adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov;
	adapter->soft_stats.rx_trunc += smb->rx_sz_ov;
J
Jay Cliburn 已提交
1707

J
Jay Cliburn 已提交
1708 1709 1710 1711 1712 1713
	/* Tx Errors */
	adapter->soft_stats.tx_errors += (smb->tx_late_col +
		smb->tx_abort_col + smb->tx_underrun + smb->tx_trunc);
	adapter->soft_stats.tx_fifo_errors += smb->tx_underrun;
	adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col;
	adapter->soft_stats.tx_window_errors += smb->tx_late_col;
J
Jay Cliburn 已提交
1714

J
Jay Cliburn 已提交
1715 1716 1717 1718 1719 1720 1721 1722
	adapter->soft_stats.excecol += smb->tx_abort_col;
	adapter->soft_stats.deffer += smb->tx_defer;
	adapter->soft_stats.scc += smb->tx_1_col;
	adapter->soft_stats.mcc += smb->tx_2_col;
	adapter->soft_stats.latecol += smb->tx_late_col;
	adapter->soft_stats.tx_underun += smb->tx_underrun;
	adapter->soft_stats.tx_trunc += smb->tx_trunc;
	adapter->soft_stats.tx_pause += smb->tx_pause;
J
Jay Cliburn 已提交
1723

1724 1725 1726 1727 1728 1729 1730 1731
	netdev->stats.rx_packets = adapter->soft_stats.rx_packets;
	netdev->stats.tx_packets = adapter->soft_stats.tx_packets;
	netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes;
	netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes;
	netdev->stats.multicast = adapter->soft_stats.multicast;
	netdev->stats.collisions = adapter->soft_stats.collisions;
	netdev->stats.rx_errors = adapter->soft_stats.rx_errors;
	netdev->stats.rx_over_errors =
J
Jay Cliburn 已提交
1732
		adapter->soft_stats.rx_missed_errors;
1733
	netdev->stats.rx_length_errors =
J
Jay Cliburn 已提交
1734
		adapter->soft_stats.rx_length_errors;
1735 1736
	netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors;
	netdev->stats.rx_frame_errors =
J
Jay Cliburn 已提交
1737
		adapter->soft_stats.rx_frame_errors;
1738 1739
	netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors;
	netdev->stats.rx_missed_errors =
J
Jay Cliburn 已提交
1740
		adapter->soft_stats.rx_missed_errors;
1741 1742 1743
	netdev->stats.tx_errors = adapter->soft_stats.tx_errors;
	netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors;
	netdev->stats.tx_aborted_errors =
J
Jay Cliburn 已提交
1744
		adapter->soft_stats.tx_aborted_errors;
1745
	netdev->stats.tx_window_errors =
J
Jay Cliburn 已提交
1746
		adapter->soft_stats.tx_window_errors;
1747
	netdev->stats.tx_carrier_errors =
J
Jay Cliburn 已提交
1748
		adapter->soft_stats.tx_carrier_errors;
J
Jay Cliburn 已提交
1749 1750
}

J
Jay Cliburn 已提交
1751
static void atl1_update_mailbox(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1752
{
J
Jay Cliburn 已提交
1753 1754 1755 1756
	unsigned long flags;
	u32 tpd_next_to_use;
	u32 rfd_next_to_use;
	u32 rrd_next_to_clean;
J
Jay Cliburn 已提交
1757 1758
	u32 value;

J
Jay Cliburn 已提交
1759
	spin_lock_irqsave(&adapter->mb_lock, flags);
J
Jay Cliburn 已提交
1760

J
Jay Cliburn 已提交
1761 1762 1763
	tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
	rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use);
	rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean);
J
Jay Cliburn 已提交
1764

J
Jay Cliburn 已提交
1765 1766 1767 1768 1769 1770 1771
	value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
		MB_RFD_PROD_INDX_SHIFT) |
		((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
		MB_RRD_CONS_INDX_SHIFT) |
		((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
		MB_TPD_PROD_INDX_SHIFT);
	iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
J
Jay Cliburn 已提交
1772

J
Jay Cliburn 已提交
1773
	spin_unlock_irqrestore(&adapter->mb_lock, flags);
J
Jay Cliburn 已提交
1774 1775
}

J
Jay Cliburn 已提交
1776 1777
static void atl1_clean_alloc_flag(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd, u16 offset)
J
Jay Cliburn 已提交
1778
{
J
Jay Cliburn 已提交
1779
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
J
Jay Cliburn 已提交
1780

J
Jay Cliburn 已提交
1781 1782 1783 1784
	while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) {
		rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0;
		if (++rfd_ring->next_to_clean == rfd_ring->count) {
			rfd_ring->next_to_clean = 0;
J
Jay Cliburn 已提交
1785 1786
		}
	}
J
Jay Cliburn 已提交
1787
}
J
Jay Cliburn 已提交
1788

J
Jay Cliburn 已提交
1789 1790 1791 1792
static void atl1_update_rfd_index(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd)
{
	u16 num_buf;
J
Jay Cliburn 已提交
1793

J
Jay Cliburn 已提交
1794 1795 1796 1797 1798 1799
	num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) /
		adapter->rx_buffer_len;
	if (rrd->num_buf == num_buf)
		/* clean alloc flag for bad rrd */
		atl1_clean_alloc_flag(adapter, rrd, num_buf);
}
J
Jay Cliburn 已提交
1800

J
Jay Cliburn 已提交
1801 1802 1803 1804
static void atl1_rx_checksum(struct atl1_adapter *adapter,
	struct rx_return_desc *rrd, struct sk_buff *skb)
{
	struct pci_dev *pdev = adapter->pdev;
J
Jay Cliburn 已提交
1805

1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816
	/*
	 * The L1 hardware contains a bug that erroneously sets the
	 * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
	 * fragmented IP packet is received, even though the packet
	 * is perfectly valid and its checksum is correct. There's
	 * no way to distinguish between one of these good packets
	 * and a packet that actually contains a TCP/UDP checksum
	 * error, so all we can do is allow it to be handed up to
	 * the higher layers and let it be sorted out there.
	 */

1817
	skb_checksum_none_assert(skb);
J
Jay Cliburn 已提交
1818

J
Jay Cliburn 已提交
1819 1820 1821 1822
	if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
		if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
					ERR_FLAG_CODE | ERR_FLAG_OV)) {
			adapter->hw_csum_err++;
J
Jay Cliburn 已提交
1823 1824 1825
			if (netif_msg_rx_err(adapter))
				dev_printk(KERN_DEBUG, &pdev->dev,
					"rx checksum error\n");
J
Jay Cliburn 已提交
1826
			return;
J
Jay Cliburn 已提交
1827 1828 1829
		}
	}

J
Jay Cliburn 已提交
1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840
	/* not IPv4 */
	if (!(rrd->pkt_flg & PACKET_FLAG_IPV4))
		/* checksum is invalid, but it's not an IPv4 pkt, so ok */
		return;

	/* IPv4 packet */
	if (likely(!(rrd->err_flg &
		(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) {
		skb->ip_summed = CHECKSUM_UNNECESSARY;
		adapter->hw_csum_good++;
		return;
J
Jay Cliburn 已提交
1841 1842 1843
	}
}

J
Jay Cliburn 已提交
1844 1845 1846 1847 1848
/*
 * atl1_alloc_rx_buffers - Replace used receive buffers
 * @adapter: address of board private structure
 */
static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1849
{
J
Jay Cliburn 已提交
1850 1851 1852 1853 1854 1855 1856 1857 1858
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct pci_dev *pdev = adapter->pdev;
	struct page *page;
	unsigned long offset;
	struct atl1_buffer *buffer_info, *next_info;
	struct sk_buff *skb;
	u16 num_alloc = 0;
	u16 rfd_next_to_use, next_next;
	struct rx_free_desc *rfd_desc;
J
Jay Cliburn 已提交
1859

J
Jay Cliburn 已提交
1860 1861 1862 1863 1864
	next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use);
	if (++next_next == rfd_ring->count)
		next_next = 0;
	buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
	next_info = &rfd_ring->buffer_info[next_next];
J
Jay Cliburn 已提交
1865

J
Jay Cliburn 已提交
1866 1867 1868 1869 1870
	while (!buffer_info->alloced && !next_info->alloced) {
		if (buffer_info->skb) {
			buffer_info->alloced = 1;
			goto next;
		}
J
Jay Cliburn 已提交
1871

J
Jay Cliburn 已提交
1872
		rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
J
Jay Cliburn 已提交
1873

1874 1875
		skb = netdev_alloc_skb_ip_align(adapter->netdev,
						adapter->rx_buffer_len);
J
Jay Cliburn 已提交
1876 1877
		if (unlikely(!skb)) {
			/* Better luck next round */
1878
			adapter->netdev->stats.rx_dropped++;
J
Jay Cliburn 已提交
1879 1880
			break;
		}
J
Jay Cliburn 已提交
1881

J
Jay Cliburn 已提交
1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892
		buffer_info->alloced = 1;
		buffer_info->skb = skb;
		buffer_info->length = (u16) adapter->rx_buffer_len;
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(pdev, page, offset,
						adapter->rx_buffer_len,
						PCI_DMA_FROMDEVICE);
		rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
		rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
		rfd_desc->coalese = 0;
J
Jay Cliburn 已提交
1893

J
Jay Cliburn 已提交
1894 1895 1896 1897
next:
		rfd_next_to_use = next_next;
		if (unlikely(++next_next == rfd_ring->count))
			next_next = 0;
J
Jay Cliburn 已提交
1898

J
Jay Cliburn 已提交
1899 1900 1901 1902
		buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
		next_info = &rfd_ring->buffer_info[next_next];
		num_alloc++;
	}
J
Jay Cliburn 已提交
1903

J
Jay Cliburn 已提交
1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914
	if (num_alloc) {
		/*
		 * Force memory writes to complete before letting h/w
		 * know there are new descriptors to fetch.  (Only
		 * applicable for weak-ordered memory model archs,
		 * such as IA-64).
		 */
		wmb();
		atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use);
	}
	return num_alloc;
J
Jay Cliburn 已提交
1915 1916
}

J
Jay Cliburn 已提交
1917
static void atl1_intr_rx(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
1918
{
J
Jay Cliburn 已提交
1919 1920 1921
	int i, count;
	u16 length;
	u16 rrd_next_to_clean;
J
Jay Cliburn 已提交
1922
	u32 value;
J
Jay Cliburn 已提交
1923 1924 1925 1926 1927
	struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
	struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
	struct atl1_buffer *buffer_info;
	struct rx_return_desc *rrd;
	struct sk_buff *skb;
J
Jay Cliburn 已提交
1928

J
Jay Cliburn 已提交
1929
	count = 0;
J
Jay Cliburn 已提交
1930

J
Jay Cliburn 已提交
1931
	rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean);
J
Jay Cliburn 已提交
1932

J
Jay Cliburn 已提交
1933 1934 1935 1936 1937 1938 1939 1940
	while (1) {
		rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean);
		i = 1;
		if (likely(rrd->xsz.valid)) {	/* packet valid */
chk_rrd:
			/* check rrd status */
			if (likely(rrd->num_buf == 1))
				goto rrd_ok;
J
Jay Cliburn 已提交
1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962
			else if (netif_msg_rx_err(adapter)) {
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"unexpected RRD buffer count\n");
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"rx_buf_len = %d\n",
					adapter->rx_buffer_len);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD num_buf = %d\n",
					rrd->num_buf);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD pkt_len = %d\n",
					rrd->xsz.xsum_sz.pkt_size);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD pkt_flg = 0x%08X\n",
					rrd->pkt_flg);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD err_flg = 0x%08X\n",
					rrd->err_flg);
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"RRD vlan_tag = 0x%08X\n",
					rrd->vlan_tag);
			}
J
Jay Cliburn 已提交
1963

J
Jay Cliburn 已提交
1964 1965 1966 1967 1968 1969 1970
			/* rrd seems to be bad */
			if (unlikely(i-- > 0)) {
				/* rrd may not be DMAed completely */
				udelay(1);
				goto chk_rrd;
			}
			/* bad rrd */
J
Jay Cliburn 已提交
1971 1972 1973
			if (netif_msg_rx_err(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"bad RRD\n");
J
Jay Cliburn 已提交
1974 1975 1976
			/* see if update RFD index */
			if (rrd->num_buf > 1)
				atl1_update_rfd_index(adapter, rrd);
J
Jay Cliburn 已提交
1977

J
Jay Cliburn 已提交
1978 1979 1980 1981 1982 1983 1984
			/* update rrd */
			rrd->xsz.valid = 0;
			if (++rrd_next_to_clean == rrd_ring->count)
				rrd_next_to_clean = 0;
			count++;
			continue;
		} else {	/* current rrd still not be updated */
J
Jay Cliburn 已提交
1985

J
Jay Cliburn 已提交
1986 1987 1988 1989 1990
			break;
		}
rrd_ok:
		/* clean alloc flag for bad rrd */
		atl1_clean_alloc_flag(adapter, rrd, 0);
J
Jay Cliburn 已提交
1991

J
Jay Cliburn 已提交
1992 1993 1994
		buffer_info = &rfd_ring->buffer_info[rrd->buf_indx];
		if (++rfd_ring->next_to_clean == rfd_ring->count)
			rfd_ring->next_to_clean = 0;
J
Jay Cliburn 已提交
1995

J
Jay Cliburn 已提交
1996 1997 1998 1999
		/* update rrd next to clean */
		if (++rrd_next_to_clean == rrd_ring->count)
			rrd_next_to_clean = 0;
		count++;
J
Jay Cliburn 已提交
2000

J
Jay Cliburn 已提交
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
		if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
			if (!(rrd->err_flg &
				(ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM
				| ERR_FLAG_LEN))) {
				/* packet error, don't need upstream */
				buffer_info->alloced = 0;
				rrd->xsz.valid = 0;
				continue;
			}
		}
J
Jay Cliburn 已提交
2011

J
Jay Cliburn 已提交
2012 2013 2014
		/* Good Receive */
		pci_unmap_page(adapter->pdev, buffer_info->dma,
			       buffer_info->length, PCI_DMA_FROMDEVICE);
2015
		buffer_info->dma = 0;
J
Jay Cliburn 已提交
2016 2017
		skb = buffer_info->skb;
		length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
J
Jay Cliburn 已提交
2018

2019
		skb_put(skb, length - ETH_FCS_LEN);
J
Jay Cliburn 已提交
2020

J
Jay Cliburn 已提交
2021 2022 2023
		/* Receive Checksum Offload */
		atl1_rx_checksum(adapter, rrd, skb);
		skb->protocol = eth_type_trans(skb, adapter->netdev);
J
Jay Cliburn 已提交
2024

J
Jay Cliburn 已提交
2025 2026 2027 2028 2029 2030 2031
		if (adapter->vlgrp && (rrd->pkt_flg & PACKET_FLAG_VLAN_INS)) {
			u16 vlan_tag = (rrd->vlan_tag >> 4) |
					((rrd->vlan_tag & 7) << 13) |
					((rrd->vlan_tag & 8) << 9);
			vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
		} else
			netif_rx(skb);
J
Jay Cliburn 已提交
2032

J
Jay Cliburn 已提交
2033 2034 2035 2036 2037
		/* let protocol layer free skb */
		buffer_info->skb = NULL;
		buffer_info->alloced = 0;
		rrd->xsz.valid = 0;
	}
J
Jay Cliburn 已提交
2038

J
Jay Cliburn 已提交
2039
	atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean);
J
Jay Cliburn 已提交
2040

J
Jay Cliburn 已提交
2041
	atl1_alloc_rx_buffers(adapter);
J
Jay Cliburn 已提交
2042

J
Jay Cliburn 已提交
2043 2044 2045 2046
	/* update mailbox ? */
	if (count) {
		u32 tpd_next_to_use;
		u32 rfd_next_to_use;
J
Jay Cliburn 已提交
2047

J
Jay Cliburn 已提交
2048
		spin_lock(&adapter->mb_lock);
J
Jay Cliburn 已提交
2049

J
Jay Cliburn 已提交
2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063
		tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
		rfd_next_to_use =
		    atomic_read(&adapter->rfd_ring.next_to_use);
		rrd_next_to_clean =
		    atomic_read(&adapter->rrd_ring.next_to_clean);
		value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
			MB_RFD_PROD_INDX_SHIFT) |
                        ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
			MB_RRD_CONS_INDX_SHIFT) |
                        ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
			MB_TPD_PROD_INDX_SHIFT);
		iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
		spin_unlock(&adapter->mb_lock);
	}
J
Jay Cliburn 已提交
2064 2065
}

J
Jay Cliburn 已提交
2066
static void atl1_intr_tx(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2067
{
J
Jay Cliburn 已提交
2068 2069 2070 2071
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
	u16 sw_tpd_next_to_clean;
	u16 cmb_tpd_next_to_clean;
J
Jay Cliburn 已提交
2072

J
Jay Cliburn 已提交
2073 2074
	sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
	cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
J
Jay Cliburn 已提交
2075

J
Jay Cliburn 已提交
2076 2077
	while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
		struct tx_packet_desc *tpd;
J
Jay Cliburn 已提交
2078

J
Jay Cliburn 已提交
2079 2080 2081 2082 2083 2084 2085
		tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
		buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
		if (buffer_info->dma) {
			pci_unmap_page(adapter->pdev, buffer_info->dma,
				       buffer_info->length, PCI_DMA_TODEVICE);
			buffer_info->dma = 0;
		}
J
Jay Cliburn 已提交
2086

J
Jay Cliburn 已提交
2087 2088 2089 2090
		if (buffer_info->skb) {
			dev_kfree_skb_irq(buffer_info->skb);
			buffer_info->skb = NULL;
		}
J
Jay Cliburn 已提交
2091

J
Jay Cliburn 已提交
2092 2093 2094 2095 2096
		if (++sw_tpd_next_to_clean == tpd_ring->count)
			sw_tpd_next_to_clean = 0;
	}
	atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);

2097 2098
	if (netif_queue_stopped(adapter->netdev) &&
	    netif_carrier_ok(adapter->netdev))
J
Jay Cliburn 已提交
2099
		netif_wake_queue(adapter->netdev);
J
Jay Cliburn 已提交
2100 2101
}

2102
static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
J
Jay Cliburn 已提交
2103 2104 2105
{
	u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
	u16 next_to_use = atomic_read(&tpd_ring->next_to_use);
2106
	return (next_to_clean > next_to_use) ?
J
Jay Cliburn 已提交
2107
		next_to_clean - next_to_use - 1 :
2108
		tpd_ring->count + next_to_clean - next_to_use - 1;
J
Jay Cliburn 已提交
2109 2110 2111
}

static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2112
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2113
{
J
Jay Cliburn 已提交
2114 2115
	u8 hdr_len, ip_off;
	u32 real_len;
J
Jay Cliburn 已提交
2116 2117 2118 2119 2120 2121
	int err;

	if (skb_shinfo(skb)->gso_size) {
		if (skb_header_cloned(skb)) {
			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
			if (unlikely(err))
J
Jay Cliburn 已提交
2122
				return -1;
J
Jay Cliburn 已提交
2123 2124
		}

A
Al Viro 已提交
2125
		if (skb->protocol == htons(ETH_P_IP)) {
2126 2127
			struct iphdr *iph = ip_hdr(skb);

J
Jay Cliburn 已提交
2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148
			real_len = (((unsigned char *)iph - skb->data) +
				ntohs(iph->tot_len));
			if (real_len < skb->len)
				pskb_trim(skb, real_len);
			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
			if (skb->len == hdr_len) {
				iph->check = 0;
				tcp_hdr(skb)->check =
					~csum_tcpudp_magic(iph->saddr,
					iph->daddr, tcp_hdrlen(skb),
					IPPROTO_TCP, 0);
				ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
					TPD_IPHL_SHIFT;
				ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
					TPD_TCPHDRLEN_MASK) <<
					TPD_TCPHDRLEN_SHIFT;
				ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT;
				ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT;
				return 1;
			}

2149
			iph->check = 0;
2150
			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
J
Jay Cliburn 已提交
2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166
					iph->daddr, 0, IPPROTO_TCP, 0);
			ip_off = (unsigned char *)iph -
				(unsigned char *) skb_network_header(skb);
			if (ip_off == 8) /* 802.3-SNAP frame */
				ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT;
			else if (ip_off != 0)
				return -2;

			ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
				TPD_IPHL_SHIFT;
			ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
				TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT;
			ptpd->word3 |= (skb_shinfo(skb)->gso_size &
				TPD_MSS_MASK) << TPD_MSS_SHIFT;
			ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
			return 3;
J
Jay Cliburn 已提交
2167 2168 2169 2170 2171 2172
		}
	}
	return false;
}

static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2173
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2174 2175 2176 2177
{
	u8 css, cso;

	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2178
		css = skb_checksum_start_offset(skb);
J
Jay Cliburn 已提交
2179 2180 2181 2182 2183 2184
		cso = css + (u8) skb->csum_offset;
		if (unlikely(css & 0x1)) {
			/* L1 hardware requires an even number here */
			if (netif_msg_tx_err(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"payload offset not an even number\n");
J
Jay Cliburn 已提交
2185 2186
			return -1;
		}
J
Jay Cliburn 已提交
2187 2188 2189 2190 2191
		ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) <<
			TPD_PLOADOFFSET_SHIFT;
		ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) <<
			TPD_CCSUMOFFSET_SHIFT;
		ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT;
J
Jay Cliburn 已提交
2192 2193
		return true;
	}
J
Jay Cliburn 已提交
2194
	return 0;
J
Jay Cliburn 已提交
2195 2196
}

J
Jay Cliburn 已提交
2197
static void atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
J
Jay Cliburn 已提交
2198
	struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2199 2200 2201
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
J
Jay Cliburn 已提交
2202
	u16 buf_len = skb->len;
J
Jay Cliburn 已提交
2203 2204 2205 2206
	struct page *page;
	unsigned long offset;
	unsigned int nr_frags;
	unsigned int f;
J
Jay Cliburn 已提交
2207 2208 2209 2210
	int retval;
	u16 next_to_use;
	u16 data_len;
	u8 hdr_len;
J
Jay Cliburn 已提交
2211

J
Jay Cliburn 已提交
2212
	buf_len -= skb->data_len;
J
Jay Cliburn 已提交
2213
	nr_frags = skb_shinfo(skb)->nr_frags;
J
Jay Cliburn 已提交
2214 2215
	next_to_use = atomic_read(&tpd_ring->next_to_use);
	buffer_info = &tpd_ring->buffer_info[next_to_use];
2216
	BUG_ON(buffer_info->skb);
J
Jay Cliburn 已提交
2217 2218
	/* put skb in last TPD */
	buffer_info->skb = NULL;
J
Jay Cliburn 已提交
2219

J
Jay Cliburn 已提交
2220 2221 2222 2223 2224
	retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
	if (retval) {
		/* TSO */
		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
		buffer_info->length = hdr_len;
J
Jay Cliburn 已提交
2225 2226 2227
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(adapter->pdev, page,
J
Jay Cliburn 已提交
2228
						offset, hdr_len,
J
Jay Cliburn 已提交
2229 2230
						PCI_DMA_TODEVICE);

J
Jay Cliburn 已提交
2231 2232
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2233

J
Jay Cliburn 已提交
2234 2235
		if (buf_len > hdr_len) {
			int i, nseg;
2236

J
Jay Cliburn 已提交
2237 2238
			data_len = buf_len - hdr_len;
			nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) /
J
Jay Cliburn 已提交
2239
				ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2240
			for (i = 0; i < nseg; i++) {
J
Jay Cliburn 已提交
2241
				buffer_info =
J
Jay Cliburn 已提交
2242
				    &tpd_ring->buffer_info[next_to_use];
J
Jay Cliburn 已提交
2243 2244
				buffer_info->skb = NULL;
				buffer_info->length =
J
Jay Cliburn 已提交
2245
				    (ATL1_MAX_TX_BUF_LEN >=
J
Jay Cliburn 已提交
2246 2247
				     data_len) ? ATL1_MAX_TX_BUF_LEN : data_len;
				data_len -= buffer_info->length;
J
Jay Cliburn 已提交
2248
				page = virt_to_page(skb->data +
J
Jay Cliburn 已提交
2249
					(hdr_len + i * ATL1_MAX_TX_BUF_LEN));
J
Jay Cliburn 已提交
2250
				offset = (unsigned long)(skb->data +
J
Jay Cliburn 已提交
2251 2252
					(hdr_len + i * ATL1_MAX_TX_BUF_LEN)) &
					~PAGE_MASK;
J
Jay Cliburn 已提交
2253 2254 2255
				buffer_info->dma = pci_map_page(adapter->pdev,
					page, offset, buffer_info->length,
					PCI_DMA_TODEVICE);
J
Jay Cliburn 已提交
2256 2257
				if (++next_to_use == tpd_ring->count)
					next_to_use = 0;
J
Jay Cliburn 已提交
2258 2259 2260
			}
		}
	} else {
J
Jay Cliburn 已提交
2261 2262
		/* not TSO */
		buffer_info->length = buf_len;
J
Jay Cliburn 已提交
2263 2264 2265
		page = virt_to_page(skb->data);
		offset = (unsigned long)skb->data & ~PAGE_MASK;
		buffer_info->dma = pci_map_page(adapter->pdev, page,
J
Jay Cliburn 已提交
2266 2267 2268
			offset, buf_len, PCI_DMA_TODEVICE);
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2269 2270 2271 2272
	}

	for (f = 0; f < nr_frags; f++) {
		struct skb_frag_struct *frag;
J
Jay Cliburn 已提交
2273
		u16 i, nseg;
J
Jay Cliburn 已提交
2274 2275

		frag = &skb_shinfo(skb)->frags[f];
J
Jay Cliburn 已提交
2276
		buf_len = frag->size;
J
Jay Cliburn 已提交
2277

J
Jay Cliburn 已提交
2278 2279 2280 2281
		nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) /
			ATL1_MAX_TX_BUF_LEN;
		for (i = 0; i < nseg; i++) {
			buffer_info = &tpd_ring->buffer_info[next_to_use];
2282 2283
			BUG_ON(buffer_info->skb);

J
Jay Cliburn 已提交
2284
			buffer_info->skb = NULL;
J
Jay Cliburn 已提交
2285 2286 2287
			buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
				ATL1_MAX_TX_BUF_LEN : buf_len;
			buf_len -= buffer_info->length;
J
Jay Cliburn 已提交
2288 2289 2290 2291
			buffer_info->dma = pci_map_page(adapter->pdev,
				frag->page,
				frag->page_offset + (i * ATL1_MAX_TX_BUF_LEN),
				buffer_info->length, PCI_DMA_TODEVICE);
J
Jay Cliburn 已提交
2292

J
Jay Cliburn 已提交
2293 2294
			if (++next_to_use == tpd_ring->count)
				next_to_use = 0;
J
Jay Cliburn 已提交
2295 2296 2297 2298 2299 2300 2301
		}
	}

	/* last tpd's buffer-info */
	buffer_info->skb = skb;
}

J
Jay Cliburn 已提交
2302 2303
static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count,
       struct tx_packet_desc *ptpd)
J
Jay Cliburn 已提交
2304 2305 2306 2307
{
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
	struct atl1_buffer *buffer_info;
	struct tx_packet_desc *tpd;
J
Jay Cliburn 已提交
2308 2309 2310
	u16 j;
	u32 val;
	u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use);
J
Jay Cliburn 已提交
2311 2312

	for (j = 0; j < count; j++) {
J
Jay Cliburn 已提交
2313 2314 2315 2316
		buffer_info = &tpd_ring->buffer_info[next_to_use];
		tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use);
		if (tpd != ptpd)
			memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
J
Jay Cliburn 已提交
2317
		tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
J
Jay Cliburn 已提交
2318 2319
		tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT);
		tpd->word2 |= (cpu_to_le16(buffer_info->length) &
J
Jay Cliburn 已提交
2320
			TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;
J
Jay Cliburn 已提交
2321

J
Jay Cliburn 已提交
2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333
		/*
		 * if this is the first packet in a TSO chain, set
		 * TPD_HDRFLAG, otherwise, clear it.
		 */
		val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) &
			TPD_SEGMENT_EN_MASK;
		if (val) {
			if (!j)
				tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
			else
				tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT);
		}
J
Jay Cliburn 已提交
2334 2335

		if (j == (count - 1))
J
Jay Cliburn 已提交
2336
			tpd->word3 |= 1 << TPD_EOP_SHIFT;
J
Jay Cliburn 已提交
2337

J
Jay Cliburn 已提交
2338 2339
		if (++next_to_use == tpd_ring->count)
			next_to_use = 0;
J
Jay Cliburn 已提交
2340 2341 2342 2343 2344 2345 2346 2347 2348
	}
	/*
	 * Force memory writes to complete before letting h/w
	 * know there are new descriptors to fetch.  (Only
	 * applicable for weak-ordered memory model archs,
	 * such as IA-64).
	 */
	wmb();

J
Jay Cliburn 已提交
2349
	atomic_set(&tpd_ring->next_to_use, next_to_use);
J
Jay Cliburn 已提交
2350 2351
}

2352 2353
static netdev_tx_t atl1_xmit_frame(struct sk_buff *skb,
					 struct net_device *netdev)
J
Jay Cliburn 已提交
2354 2355
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2356
	struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
E
Eric Dumazet 已提交
2357
	int len;
J
Jay Cliburn 已提交
2358 2359 2360
	int tso;
	int count = 1;
	int ret_val;
J
Jay Cliburn 已提交
2361
	struct tx_packet_desc *ptpd;
J
Jay Cliburn 已提交
2362 2363 2364 2365 2366 2367 2368
	u16 frag_size;
	u16 vlan_tag;
	unsigned int nr_frags = 0;
	unsigned int mss = 0;
	unsigned int f;
	unsigned int proto_hdr_len;

E
Eric Dumazet 已提交
2369
	len = skb_headlen(skb);
J
Jay Cliburn 已提交
2370

J
Jay Cliburn 已提交
2371
	if (unlikely(skb->len <= 0)) {
J
Jay Cliburn 已提交
2372 2373 2374 2375 2376 2377 2378 2379
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	nr_frags = skb_shinfo(skb)->nr_frags;
	for (f = 0; f < nr_frags; f++) {
		frag_size = skb_shinfo(skb)->frags[f].size;
		if (frag_size)
J
Jay Cliburn 已提交
2380 2381
			count += (frag_size + ATL1_MAX_TX_BUF_LEN - 1) /
				ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2382 2383 2384 2385
	}

	mss = skb_shinfo(skb)->gso_size;
	if (mss) {
E
Eric Dumazet 已提交
2386
		if (skb->protocol == htons(ETH_P_IP)) {
2387
			proto_hdr_len = (skb_transport_offset(skb) +
2388
					 tcp_hdrlen(skb));
J
Jay Cliburn 已提交
2389 2390 2391 2392 2393 2394 2395
			if (unlikely(proto_hdr_len > len)) {
				dev_kfree_skb_any(skb);
				return NETDEV_TX_OK;
			}
			/* need additional TPD ? */
			if (proto_hdr_len != len)
				count += (len - proto_hdr_len +
J
Jay Cliburn 已提交
2396 2397
					ATL1_MAX_TX_BUF_LEN - 1) /
					ATL1_MAX_TX_BUF_LEN;
J
Jay Cliburn 已提交
2398 2399 2400
		}
	}

2401
	if (atl1_tpd_avail(&adapter->tpd_ring) < count) {
J
Jay Cliburn 已提交
2402 2403
		/* not enough descriptors */
		netif_stop_queue(netdev);
J
Jay Cliburn 已提交
2404 2405 2406
		if (netif_msg_tx_queued(adapter))
			dev_printk(KERN_DEBUG, &adapter->pdev->dev,
				"tx busy\n");
J
Jay Cliburn 已提交
2407 2408 2409
		return NETDEV_TX_BUSY;
	}

J
Jay Cliburn 已提交
2410 2411 2412
	ptpd = ATL1_TPD_DESC(tpd_ring,
		(u16) atomic_read(&tpd_ring->next_to_use));
	memset(ptpd, 0, sizeof(struct tx_packet_desc));
J
Jay Cliburn 已提交
2413

2414
	if (vlan_tx_tag_present(skb)) {
J
Jay Cliburn 已提交
2415 2416 2417
		vlan_tag = vlan_tx_tag_get(skb);
		vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
			((vlan_tag >> 9) & 0x8);
J
Jay Cliburn 已提交
2418
		ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
J
Jay Cliburn 已提交
2419 2420
		ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) <<
			TPD_VLANTAG_SHIFT;
J
Jay Cliburn 已提交
2421 2422
	}

J
Jay Cliburn 已提交
2423
	tso = atl1_tso(adapter, skb, ptpd);
J
Jay Cliburn 已提交
2424 2425 2426 2427 2428 2429
	if (tso < 0) {
		dev_kfree_skb_any(skb);
		return NETDEV_TX_OK;
	}

	if (!tso) {
J
Jay Cliburn 已提交
2430
		ret_val = atl1_tx_csum(adapter, skb, ptpd);
J
Jay Cliburn 已提交
2431 2432 2433 2434 2435 2436
		if (ret_val < 0) {
			dev_kfree_skb_any(skb);
			return NETDEV_TX_OK;
		}
	}

J
Jay Cliburn 已提交
2437 2438
	atl1_tx_map(adapter, skb, ptpd);
	atl1_tx_queue(adapter, count, ptpd);
J
Jay Cliburn 已提交
2439
	atl1_update_mailbox(adapter);
J
Jay Cliburn 已提交
2440
	mmiowb();
J
Jay Cliburn 已提交
2441 2442 2443 2444
	return NETDEV_TX_OK;
}

/*
J
Jay Cliburn 已提交
2445 2446 2447 2448
 * atl1_intr - Interrupt Handler
 * @irq: interrupt number
 * @data: pointer to a network interface device structure
 * @pt_regs: CPU registers structure
J
Jay Cliburn 已提交
2449
 */
J
Jay Cliburn 已提交
2450
static irqreturn_t atl1_intr(int irq, void *data)
J
Jay Cliburn 已提交
2451
{
J
Jay Cliburn 已提交
2452 2453 2454
	struct atl1_adapter *adapter = netdev_priv(data);
	u32 status;
	int max_ints = 10;
J
Jay Cliburn 已提交
2455

J
Jay Cliburn 已提交
2456 2457 2458
	status = adapter->cmb.cmb->int_stats;
	if (!status)
		return IRQ_NONE;
J
Jay Cliburn 已提交
2459

J
Jay Cliburn 已提交
2460 2461 2462 2463 2464
	do {
		/* clear CMB interrupt status at once */
		adapter->cmb.cmb->int_stats = 0;

		if (status & ISR_GPHY)	/* clear phy status */
J
Jay Cliburn 已提交
2465
			atlx_clear_phy_int(adapter);
J
Jay Cliburn 已提交
2466 2467 2468 2469 2470 2471 2472 2473 2474 2475

		/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
		iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);

		/* check if SMB intr */
		if (status & ISR_SMB)
			atl1_inc_smb(adapter);

		/* check if PCIE PHY Link down */
		if (status & ISR_PHY_LINKDOWN) {
J
Jay Cliburn 已提交
2476 2477 2478
			if (netif_msg_intr(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"pcie phy link down %x\n", status);
J
Jay Cliburn 已提交
2479 2480 2481 2482 2483
			if (netif_running(adapter->netdev)) {	/* reset MAC */
				iowrite32(0, adapter->hw.hw_addr + REG_IMR);
				schedule_work(&adapter->pcie_dma_to_rst_task);
				return IRQ_HANDLED;
			}
J
Jay Cliburn 已提交
2484
		}
J
Jay Cliburn 已提交
2485 2486 2487

		/* check if DMA read/write error ? */
		if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
J
Jay Cliburn 已提交
2488 2489 2490 2491
			if (netif_msg_intr(adapter))
				dev_printk(KERN_DEBUG, &adapter->pdev->dev,
					"pcie DMA r/w error (status = 0x%x)\n",
					status);
J
Jay Cliburn 已提交
2492 2493 2494
			iowrite32(0, adapter->hw.hw_addr + REG_IMR);
			schedule_work(&adapter->pcie_dma_to_rst_task);
			return IRQ_HANDLED;
J
Jay Cliburn 已提交
2495 2496
		}

J
Jay Cliburn 已提交
2497 2498 2499 2500 2501
		/* link event */
		if (status & ISR_GPHY) {
			adapter->soft_stats.tx_carrier_errors++;
			atl1_check_for_link(adapter);
		}
J
Jay Cliburn 已提交
2502

J
Jay Cliburn 已提交
2503 2504 2505
		/* transmit event */
		if (status & ISR_CMB_TX)
			atl1_intr_tx(adapter);
J
Jay Cliburn 已提交
2506

J
Jay Cliburn 已提交
2507 2508 2509 2510 2511 2512 2513
		/* rx exception */
		if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
			ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
			ISR_HOST_RRD_OV | ISR_CMB_RX))) {
			if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
				ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
				ISR_HOST_RRD_OV))
J
Jay Cliburn 已提交
2514 2515 2516 2517 2518
				if (netif_msg_intr(adapter))
					dev_printk(KERN_DEBUG,
						&adapter->pdev->dev,
						"rx exception, ISR = 0x%x\n",
						status);
J
Jay Cliburn 已提交
2519 2520
			atl1_intr_rx(adapter);
		}
J
Jay Cliburn 已提交
2521

J
Jay Cliburn 已提交
2522 2523 2524 2525 2526 2527 2528 2529
		if (--max_ints < 0)
			break;

	} while ((status = adapter->cmb.cmb->int_stats));

	/* re-enable Interrupt */
	iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR);
	return IRQ_HANDLED;
J
Jay Cliburn 已提交
2530 2531 2532
}


J
Jay Cliburn 已提交
2533 2534 2535 2536 2537 2538
/*
 * atl1_phy_config - Timer Call-back
 * @data: pointer to netdev cast into an unsigned long
 */
static void atl1_phy_config(unsigned long data)
{
J
Jay Cliburn 已提交
2539 2540
	struct atl1_adapter *adapter = (struct atl1_adapter *)data;
	struct atl1_hw *hw = &adapter->hw;
J
Jay Cliburn 已提交
2541
	unsigned long flags;
J
Jay Cliburn 已提交
2542

J
Jay Cliburn 已提交
2543
	spin_lock_irqsave(&adapter->lock, flags);
J
Jay Cliburn 已提交
2544 2545 2546 2547
	adapter->phy_timer_pending = false;
	atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
	atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
	atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
J
Jay Cliburn 已提交
2548 2549 2550
	spin_unlock_irqrestore(&adapter->lock, flags);
}

J
Jay Cliburn 已提交
2551 2552 2553 2554 2555 2556 2557 2558 2559 2560
/*
 * Orphaned vendor comment left intact here:
 * <vendor comment>
 * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
 * will assert. We do soft reset <0x1400=1> according
 * with the SPEC. BUT, it seemes that PCIE or DMA
 * state-machine will not be reset. DMAR_TO_INT will
 * assert again and again.
 * </vendor comment>
 */
J
Jay Cliburn 已提交
2561

J
Jay Cliburn 已提交
2562
static int atl1_reset(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2563 2564 2565
{
	int ret;
	ret = atl1_reset_hw(&adapter->hw);
J
Jay Cliburn 已提交
2566
	if (ret)
J
Jay Cliburn 已提交
2567 2568
		return ret;
	return atl1_init_hw(&adapter->hw);
J
Jay Cliburn 已提交
2569 2570
}

J
Jay Cliburn 已提交
2571
static s32 atl1_up(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2572 2573 2574 2575 2576 2577
{
	struct net_device *netdev = adapter->netdev;
	int err;
	int irq_flags = IRQF_SAMPLE_RANDOM;

	/* hardware has been reset, we need to reload some things */
J
Jay Cliburn 已提交
2578
	atlx_set_multi(netdev);
2579
	atl1_init_ring_ptrs(adapter);
J
Jay Cliburn 已提交
2580
	atlx_restore_vlan(adapter);
J
Jay Cliburn 已提交
2581
	err = atl1_alloc_rx_buffers(adapter);
J
Jay Cliburn 已提交
2582 2583
	if (unlikely(!err))
		/* no RX BUFFER allocated */
J
Jay Cliburn 已提交
2584 2585 2586 2587 2588 2589 2590 2591 2592
		return -ENOMEM;

	if (unlikely(atl1_configure(adapter))) {
		err = -EIO;
		goto err_up;
	}

	err = pci_enable_msi(adapter->pdev);
	if (err) {
J
Jay Cliburn 已提交
2593 2594 2595
		if (netif_msg_ifup(adapter))
			dev_info(&adapter->pdev->dev,
				"Unable to enable MSI: %d\n", err);
J
Jay Cliburn 已提交
2596 2597 2598
		irq_flags |= IRQF_SHARED;
	}

2599
	err = request_irq(adapter->pdev->irq, atl1_intr, irq_flags,
J
Jay Cliburn 已提交
2600 2601 2602 2603
			netdev->name, netdev);
	if (unlikely(err))
		goto err_up;

J
Jay Cliburn 已提交
2604
	atlx_irq_enable(adapter);
J
Jay Cliburn 已提交
2605
	atl1_check_link(adapter);
2606
	netif_start_queue(netdev);
J
Jay Cliburn 已提交
2607 2608 2609 2610 2611 2612 2613 2614 2615
	return 0;

err_up:
	pci_disable_msi(adapter->pdev);
	/* free rx_buffers */
	atl1_clean_rx_ring(adapter);
	return err;
}

J
Jay Cliburn 已提交
2616
static void atl1_down(struct atl1_adapter *adapter)
J
Jay Cliburn 已提交
2617 2618 2619
{
	struct net_device *netdev = adapter->netdev;

J
Jay Cliburn 已提交
2620
	netif_stop_queue(netdev);
J
Jay Cliburn 已提交
2621 2622 2623
	del_timer_sync(&adapter->phy_config_timer);
	adapter->phy_timer_pending = false;

J
Jay Cliburn 已提交
2624
	atlx_irq_disable(adapter);
J
Jay Cliburn 已提交
2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637
	free_irq(adapter->pdev->irq, netdev);
	pci_disable_msi(adapter->pdev);
	atl1_reset_hw(&adapter->hw);
	adapter->cmb.cmb->int_stats = 0;

	adapter->link_speed = SPEED_0;
	adapter->link_duplex = -1;
	netif_carrier_off(netdev);

	atl1_clean_tx_ring(adapter);
	atl1_clean_rx_ring(adapter);
}

J
Jay Cliburn 已提交
2638 2639 2640 2641 2642 2643 2644 2645
static void atl1_tx_timeout_task(struct work_struct *work)
{
	struct atl1_adapter *adapter =
		container_of(work, struct atl1_adapter, tx_timeout_task);
	struct net_device *netdev = adapter->netdev;

	netif_device_detach(netdev);
	atl1_down(adapter);
2646
	atl1_up(adapter);
J
Jay Cliburn 已提交
2647
	netif_device_attach(netdev);
2648 2649
}

J
Jay Cliburn 已提交
2650 2651 2652 2653 2654 2655 2656 2657
/*
 * atl1_change_mtu - Change the Maximum Transfer Unit
 * @netdev: network interface device structure
 * @new_mtu: new value for maximum frame size
 *
 * Returns 0 on success, negative on failure
 */
static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
2658 2659
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2660 2661
	int old_mtu = netdev->mtu;
	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
2662

J
Jay Cliburn 已提交
2663 2664 2665 2666 2667
	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
		if (netif_msg_link(adapter))
			dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
		return -EINVAL;
2668
	}
J
Jay Cliburn 已提交
2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681

	adapter->hw.max_frame_size = max_frame;
	adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
	adapter->rx_buffer_len = (max_frame + 7) & ~7;
	adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;

	netdev->mtu = new_mtu;
	if ((old_mtu != new_mtu) && netif_running(netdev)) {
		atl1_down(adapter);
		atl1_up(adapter);
	}

	return 0;
2682 2683
}

J
Jay Cliburn 已提交
2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700
/*
 * atl1_open - Called when a network interface is made active
 * @netdev: network interface device structure
 *
 * Returns 0 on success, negative value on failure
 *
 * The open entry point is called when a network interface is made
 * active by the system (IFF_UP).  At this point all resources needed
 * for transmit and receive operations are allocated, the interrupt
 * handler is registered with the OS, the watchdog timer is started,
 * and the stack is notified that the interface is ready.
 */
static int atl1_open(struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	int err;

J
Jay Cliburn 已提交
2701 2702
	netif_carrier_off(netdev);

J
Jay Cliburn 已提交
2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737
	/* allocate transmit descriptors */
	err = atl1_setup_ring_resources(adapter);
	if (err)
		return err;

	err = atl1_up(adapter);
	if (err)
		goto err_up;

	return 0;

err_up:
	atl1_reset(adapter);
	return err;
}

/*
 * atl1_close - Disables a network interface
 * @netdev: network interface device structure
 *
 * Returns 0, this is not allowed to fail
 *
 * The close entry point is called when an interface is de-activated
 * by the OS.  The hardware is still under the drivers control, but
 * needs to be disabled.  A global MAC reset is issued to stop the
 * hardware, and all transmit and receive resources are freed.
 */
static int atl1_close(struct net_device *netdev)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	atl1_down(adapter);
	atl1_free_ring_resources(adapter);
	return 0;
}

J
Jay Cliburn 已提交
2738
#ifdef CONFIG_PM
2739
static int atl1_suspend(struct device *dev)
J
Jay Cliburn 已提交
2740
{
2741
	struct pci_dev *pdev = to_pci_dev(dev);
J
Jay Cliburn 已提交
2742 2743 2744 2745 2746
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
	u32 ctrl = 0;
	u32 wufc = adapter->wol;
2747 2748 2749
	u32 val;
	u16 speed;
	u16 duplex;
J
Jay Cliburn 已提交
2750 2751

	netif_device_detach(netdev);
J
Jay Cliburn 已提交
2752 2753
	if (netif_running(netdev))
		atl1_down(adapter);
J
Jay Cliburn 已提交
2754

J
Jay Cliburn 已提交
2755 2756
	atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
	atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
2757 2758
	val = ctrl & BMSR_LSTATUS;
	if (val)
J
Jay Cliburn 已提交
2759
		wufc &= ~ATLX_WUFC_LNKC;
2760 2761
	if (!wufc)
		goto disable_wol;
J
Jay Cliburn 已提交
2762

2763
	if (val) {
2764 2765 2766 2767 2768 2769 2770
		val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
		if (val) {
			if (netif_msg_ifdown(adapter))
				dev_printk(KERN_DEBUG, &pdev->dev,
					"error getting speed/duplex\n");
			goto disable_wol;
		}
J
Jay Cliburn 已提交
2771 2772 2773

		ctrl = 0;

2774 2775 2776
		/* enable magic packet WOL */
		if (wufc & ATLX_WUFC_MAG)
			ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
J
Jay Cliburn 已提交
2777
		iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790
		ioread32(hw->hw_addr + REG_WOL_CTRL);

		/* configure the mac */
		ctrl = MAC_CTRL_RX_EN;
		ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
			MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
		if (duplex == FULL_DUPLEX)
			ctrl |= MAC_CTRL_DUPLX;
		ctrl |= (((u32)adapter->hw.preamble_len &
			MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
		if (adapter->vlgrp)
			ctrl |= MAC_CTRL_RMV_VLAN;
		if (wufc & ATLX_WUFC_MAG)
J
Jay Cliburn 已提交
2791 2792
			ctrl |= MAC_CTRL_BC_EN;
		iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
2793 2794 2795 2796 2797 2798 2799
		ioread32(hw->hw_addr + REG_MAC_CTRL);

		/* poke the PHY */
		ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
		ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
		iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
		ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
2800
	} else {
2801 2802 2803 2804 2805 2806 2807
		ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
		iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
		ioread32(hw->hw_addr + REG_WOL_CTRL);
		iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
		ioread32(hw->hw_addr + REG_MAC_CTRL);
		hw->phy_configured = false;
	}
J
Jay Cliburn 已提交
2808

2809 2810 2811
	return 0;

 disable_wol:
2812 2813 2814 2815 2816 2817 2818
	iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
	ioread32(hw->hw_addr + REG_WOL_CTRL);
	ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
	iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
	ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
	hw->phy_configured = false;
J
Jay Cliburn 已提交
2819 2820

	return 0;
J
Jay Cliburn 已提交
2821 2822
}

2823
static int atl1_resume(struct device *dev)
J
Jay Cliburn 已提交
2824
{
2825
	struct pci_dev *pdev = to_pci_dev(dev);
J
Jay Cliburn 已提交
2826 2827
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);
J
Jay Cliburn 已提交
2828

2829
	iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
J
Jay Cliburn 已提交
2830

2831
	atl1_reset_hw(&adapter->hw);
J
Jay Cliburn 已提交
2832

L
Luca Tettamanti 已提交
2833 2834
	if (netif_running(netdev)) {
		adapter->cmb.cmb->int_stats = 0;
J
Jay Cliburn 已提交
2835
		atl1_up(adapter);
L
Luca Tettamanti 已提交
2836
	}
J
Jay Cliburn 已提交
2837 2838 2839
	netif_device_attach(netdev);

	return 0;
J
Jay Cliburn 已提交
2840
}
2841 2842 2843 2844

static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume);
#define ATL1_PM_OPS	(&atl1_pm_ops)

J
Jay Cliburn 已提交
2845
#else
2846 2847 2848 2849

static int atl1_suspend(struct device *dev) { return 0; }

#define ATL1_PM_OPS	NULL
J
Jay Cliburn 已提交
2850
#endif
J
Jay Cliburn 已提交
2851

J
Jay Cliburn 已提交
2852 2853
static void atl1_shutdown(struct pci_dev *pdev)
{
2854 2855 2856 2857 2858 2859
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter = netdev_priv(netdev);

	atl1_suspend(&pdev->dev);
	pci_wake_from_d3(pdev, adapter->wol);
	pci_set_power_state(pdev, PCI_D3hot);
J
Jay Cliburn 已提交
2860 2861
}

J
Jay Cliburn 已提交
2862 2863
#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl1_poll_controller(struct net_device *netdev)
J
Jay Cliburn 已提交
2864
{
J
Jay Cliburn 已提交
2865 2866 2867
	disable_irq(netdev->irq);
	atl1_intr(netdev->irq, netdev);
	enable_irq(netdev->irq);
J
Jay Cliburn 已提交
2868
}
J
Jay Cliburn 已提交
2869
#endif
J
Jay Cliburn 已提交
2870

2871 2872 2873
static const struct net_device_ops atl1_netdev_ops = {
	.ndo_open		= atl1_open,
	.ndo_stop		= atl1_close,
2874
	.ndo_start_xmit		= atl1_xmit_frame,
2875 2876 2877 2878 2879
	.ndo_set_multicast_list	= atlx_set_multi,
	.ndo_validate_addr	= eth_validate_addr,
	.ndo_set_mac_address	= atl1_set_mac,
	.ndo_change_mtu		= atl1_change_mtu,
	.ndo_do_ioctl		= atlx_ioctl,
2880
	.ndo_tx_timeout		= atlx_tx_timeout,
2881 2882 2883 2884 2885 2886
	.ndo_vlan_rx_register	= atlx_vlan_rx_register,
#ifdef CONFIG_NET_POLL_CONTROLLER
	.ndo_poll_controller	= atl1_poll_controller,
#endif
};

J
Jay Cliburn 已提交
2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898
/*
 * atl1_probe - Device Initialization Routine
 * @pdev: PCI device information struct
 * @ent: entry in atl1_pci_tbl
 *
 * Returns 0 on success, negative on failure
 *
 * atl1_probe initializes an adapter identified by a pci_dev structure.
 * The OS initialization, configuring of the adapter private structure,
 * and a hardware reset occur.
 */
static int __devinit atl1_probe(struct pci_dev *pdev,
J
Jay Cliburn 已提交
2899
	const struct pci_device_id *ent)
J
Jay Cliburn 已提交
2900 2901 2902 2903 2904 2905 2906 2907 2908 2909
{
	struct net_device *netdev;
	struct atl1_adapter *adapter;
	static int cards_found = 0;
	int err;

	err = pci_enable_device(pdev);
	if (err)
		return err;

2910
	/*
C
Chris Snook 已提交
2911 2912 2913 2914 2915 2916 2917 2918
	 * The atl1 chip can DMA to 64-bit addresses, but it uses a single
	 * shared register for the high 32 bits, so only a single, aligned,
	 * 4 GB physical address range can be used at a time.
	 *
	 * Supporting 64-bit DMA on this hardware is more trouble than it's
	 * worth.  It is far easier to limit to 32-bit DMA than update
	 * various kernel subsystems to support the mechanics required by a
	 * fixed-high-32-bit system.
2919
	 */
2920
	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
J
Jay Cliburn 已提交
2921
	if (err) {
2922 2923
		dev_err(&pdev->dev, "no usable DMA configuration\n");
		goto err_dma;
J
Jay Cliburn 已提交
2924
	}
J
Jay Cliburn 已提交
2925 2926
	/*
	 * Mark all PCI regions associated with PCI device
J
Jay Cliburn 已提交
2927 2928
	 * pdev as being reserved by owner atl1_driver_name
	 */
J
Jay Cliburn 已提交
2929
	err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
J
Jay Cliburn 已提交
2930 2931 2932
	if (err)
		goto err_request_regions;

J
Jay Cliburn 已提交
2933 2934
	/*
	 * Enables bus-mastering on the device and calls
J
Jay Cliburn 已提交
2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950
	 * pcibios_set_master to do the needed arch specific settings
	 */
	pci_set_master(pdev);

	netdev = alloc_etherdev(sizeof(struct atl1_adapter));
	if (!netdev) {
		err = -ENOMEM;
		goto err_alloc_etherdev;
	}
	SET_NETDEV_DEV(netdev, &pdev->dev);

	pci_set_drvdata(pdev, netdev);
	adapter = netdev_priv(netdev);
	adapter->netdev = netdev;
	adapter->pdev = pdev;
	adapter->hw.back = adapter;
J
Jay Cliburn 已提交
2951
	adapter->msg_enable = netif_msg_init(debug, atl1_default_msg);
J
Jay Cliburn 已提交
2952 2953 2954 2955 2956 2957 2958

	adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
	if (!adapter->hw.hw_addr) {
		err = -EIO;
		goto err_pci_iomap;
	}
	/* get device revision number */
J
Jay Cliburn 已提交
2959
	adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
J
Jay Cliburn 已提交
2960
		(REG_MASTER_CTRL + 2));
J
Jay Cliburn 已提交
2961 2962
	if (netif_msg_probe(adapter))
		dev_info(&pdev->dev, "version %s\n", ATLX_DRIVER_VERSION);
J
Jay Cliburn 已提交
2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973

	/* set default ring resource counts */
	adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
	adapter->tpd_ring.count = ATL1_DEFAULT_TPD;

	adapter->mii.dev = netdev;
	adapter->mii.mdio_read = mdio_read;
	adapter->mii.mdio_write = mdio_write;
	adapter->mii.phy_id_mask = 0x1f;
	adapter->mii.reg_num_mask = 0x1f;

2974
	netdev->netdev_ops = &atl1_netdev_ops;
J
Jay Cliburn 已提交
2975
	netdev->watchdog_timeo = 5 * HZ;
2976

J
Jay Cliburn 已提交
2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996
	netdev->ethtool_ops = &atl1_ethtool_ops;
	adapter->bd_number = cards_found;

	/* setup the private structure */
	err = atl1_sw_init(adapter);
	if (err)
		goto err_common;

	netdev->features = NETIF_F_HW_CSUM;
	netdev->features |= NETIF_F_SG;
	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);

	/*
	 * patch for some L1 of old version,
	 * the final version of L1 may not need these
	 * patches
	 */
	/* atl1_pcie_patch(adapter); */

	/* really reset GPHY core */
J
Jay Cliburn 已提交
2997
	iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029

	/*
	 * reset the controller to
	 * put the device in a known good starting state
	 */
	if (atl1_reset_hw(&adapter->hw)) {
		err = -EIO;
		goto err_common;
	}

	/* copy the MAC address out of the EEPROM */
	atl1_read_mac_addr(&adapter->hw);
	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);

	if (!is_valid_ether_addr(netdev->dev_addr)) {
		err = -EIO;
		goto err_common;
	}

	atl1_check_options(adapter);

	/* pre-init the MAC, and setup link */
	err = atl1_init_hw(&adapter->hw);
	if (err) {
		err = -EIO;
		goto err_common;
	}

	atl1_pcie_patch(adapter);
	/* assume we have no link for now */
	netif_carrier_off(netdev);

3030
	setup_timer(&adapter->phy_config_timer, atl1_phy_config,
S
Stephen Hemminger 已提交
3031
		    (unsigned long)adapter);
J
Jay Cliburn 已提交
3032 3033 3034 3035
	adapter->phy_timer_pending = false;

	INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);

J
Jay Cliburn 已提交
3036
	INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
J
Jay Cliburn 已提交
3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077

	INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);

	err = register_netdev(netdev);
	if (err)
		goto err_common;

	cards_found++;
	atl1_via_workaround(adapter);
	return 0;

err_common:
	pci_iounmap(pdev, adapter->hw.hw_addr);
err_pci_iomap:
	free_netdev(netdev);
err_alloc_etherdev:
	pci_release_regions(pdev);
err_dma:
err_request_regions:
	pci_disable_device(pdev);
	return err;
}

/*
 * atl1_remove - Device Removal Routine
 * @pdev: PCI device information struct
 *
 * atl1_remove is called by the PCI subsystem to alert the driver
 * that it should release a PCI device.  The could be caused by a
 * Hot-Plug event, or because the driver is going to be removed from
 * memory.
 */
static void __devexit atl1_remove(struct pci_dev *pdev)
{
	struct net_device *netdev = pci_get_drvdata(pdev);
	struct atl1_adapter *adapter;
	/* Device not available. Return. */
	if (!netdev)
		return;

	adapter = netdev_priv(netdev);
C
Chris Snook 已提交
3078

J
Jay Cliburn 已提交
3079 3080
	/*
	 * Some atl1 boards lack persistent storage for their MAC, and get it
C
Chris Snook 已提交
3081 3082 3083 3084
	 * from the BIOS during POST.  If we've been messing with the MAC
	 * address, we need to save the permanent one.
	 */
	if (memcmp(adapter->hw.mac_addr, adapter->hw.perm_mac_addr, ETH_ALEN)) {
J
Jay Cliburn 已提交
3085 3086
		memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
			ETH_ALEN);
C
Chris Snook 已提交
3087 3088 3089
		atl1_set_mac_addr(&adapter->hw);
	}

J
Jay Cliburn 已提交
3090
	iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
J
Jay Cliburn 已提交
3091 3092 3093 3094 3095 3096 3097 3098
	unregister_netdev(netdev);
	pci_iounmap(pdev, adapter->hw.hw_addr);
	pci_release_regions(pdev);
	free_netdev(netdev);
	pci_disable_device(pdev);
}

static struct pci_driver atl1_driver = {
J
Jay Cliburn 已提交
3099
	.name = ATLX_DRIVER_NAME,
J
Jay Cliburn 已提交
3100 3101 3102
	.id_table = atl1_pci_tbl,
	.probe = atl1_probe,
	.remove = __devexit_p(atl1_remove),
3103 3104
	.shutdown = atl1_shutdown,
	.driver.pm = ATL1_PM_OPS,
J
Jay Cliburn 已提交
3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130
};

/*
 * atl1_exit_module - Driver Exit Cleanup Routine
 *
 * atl1_exit_module is called just before the driver is removed
 * from memory.
 */
static void __exit atl1_exit_module(void)
{
	pci_unregister_driver(&atl1_driver);
}

/*
 * atl1_init_module - Driver Registration Routine
 *
 * atl1_init_module is the first routine called when the driver is
 * loaded. All it does is register with the PCI subsystem.
 */
static int __init atl1_init_module(void)
{
	return pci_register_driver(&atl1_driver);
}

module_init(atl1_init_module);
module_exit(atl1_exit_module);
J
Jay Cliburn 已提交
3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174

struct atl1_stats {
	char stat_string[ETH_GSTRING_LEN];
	int sizeof_stat;
	int stat_offset;
};

#define ATL1_STAT(m) \
	sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)

static struct atl1_stats atl1_gstrings_stats[] = {
	{"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
	{"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
	{"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
	{"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
	{"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
	{"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
	{"multicast", ATL1_STAT(soft_stats.multicast)},
	{"collisions", ATL1_STAT(soft_stats.collisions)},
	{"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
	{"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
	{"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
	{"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
	{"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
	{"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
	{"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
	{"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
	{"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
	{"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
	{"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
	{"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
	{"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
	{"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
	{"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
	{"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
	{"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
	{"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
	{"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
	{"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
	{"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
};

static void atl1_get_ethtool_stats(struct net_device *netdev,
	struct ethtool_stats *stats, u64 *data)
3175
{
J
Jay Cliburn 已提交
3176
	struct atl1_adapter *adapter = netdev_priv(netdev);
3177
	int i;
J
Jay Cliburn 已提交
3178
	char *p;
3179

J
Jay Cliburn 已提交
3180 3181 3182 3183
	for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
		p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
		data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
3184 3185 3186 3187
	}

}

J
Jay Cliburn 已提交
3188
static int atl1_get_sset_count(struct net_device *netdev, int sset)
3189
{
J
Jay Cliburn 已提交
3190 3191 3192 3193 3194 3195
	switch (sset) {
	case ETH_SS_STATS:
		return ARRAY_SIZE(atl1_gstrings_stats);
	default:
		return -EOPNOTSUPP;
	}
3196 3197
}

J
Jay Cliburn 已提交
3198 3199
static int atl1_get_settings(struct net_device *netdev,
	struct ethtool_cmd *ecmd)
3200
{
J
Jay Cliburn 已提交
3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;

	ecmd->supported = (SUPPORTED_10baseT_Half |
			   SUPPORTED_10baseT_Full |
			   SUPPORTED_100baseT_Half |
			   SUPPORTED_100baseT_Full |
			   SUPPORTED_1000baseT_Full |
			   SUPPORTED_Autoneg | SUPPORTED_TP);
	ecmd->advertising = ADVERTISED_TP;
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		ecmd->advertising |= ADVERTISED_Autoneg;
		if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
			ecmd->advertising |= ADVERTISED_Autoneg;
			ecmd->advertising |=
			    (ADVERTISED_10baseT_Half |
			     ADVERTISED_10baseT_Full |
			     ADVERTISED_100baseT_Half |
			     ADVERTISED_100baseT_Full |
			     ADVERTISED_1000baseT_Full);
		} else
			ecmd->advertising |= (ADVERTISED_1000baseT_Full);
	}
	ecmd->port = PORT_TP;
	ecmd->phy_address = 0;
	ecmd->transceiver = XCVR_INTERNAL;

	if (netif_carrier_ok(adapter->netdev)) {
		u16 link_speed, link_duplex;
		atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
		ecmd->speed = link_speed;
		if (link_duplex == FULL_DUPLEX)
			ecmd->duplex = DUPLEX_FULL;
		else
			ecmd->duplex = DUPLEX_HALF;
	} else {
		ecmd->speed = -1;
		ecmd->duplex = -1;
	}
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		ecmd->autoneg = AUTONEG_ENABLE;
	else
		ecmd->autoneg = AUTONEG_DISABLE;
3246 3247 3248 3249

	return 0;
}

J
Jay Cliburn 已提交
3250 3251
static int atl1_set_settings(struct net_device *netdev,
	struct ethtool_cmd *ecmd)
3252
{
J
Jay Cliburn 已提交
3253 3254
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3255
	u16 phy_data;
J
Jay Cliburn 已提交
3256 3257
	int ret_val = 0;
	u16 old_media_type = hw->media_type;
3258

J
Jay Cliburn 已提交
3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315
	if (netif_running(adapter->netdev)) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool shutting down adapter\n");
		atl1_down(adapter);
	}

	if (ecmd->autoneg == AUTONEG_ENABLE)
		hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
	else {
		if (ecmd->speed == SPEED_1000) {
			if (ecmd->duplex != DUPLEX_FULL) {
				if (netif_msg_link(adapter))
					dev_warn(&adapter->pdev->dev,
						"1000M half is invalid\n");
				ret_val = -EINVAL;
				goto exit_sset;
			}
			hw->media_type = MEDIA_TYPE_1000M_FULL;
		} else if (ecmd->speed == SPEED_100) {
			if (ecmd->duplex == DUPLEX_FULL)
				hw->media_type = MEDIA_TYPE_100M_FULL;
			else
				hw->media_type = MEDIA_TYPE_100M_HALF;
		} else {
			if (ecmd->duplex == DUPLEX_FULL)
				hw->media_type = MEDIA_TYPE_10M_FULL;
			else
				hw->media_type = MEDIA_TYPE_10M_HALF;
		}
	}
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		ecmd->advertising =
		    ADVERTISED_10baseT_Half |
		    ADVERTISED_10baseT_Full |
		    ADVERTISED_100baseT_Half |
		    ADVERTISED_100baseT_Full |
		    ADVERTISED_1000baseT_Full |
		    ADVERTISED_Autoneg | ADVERTISED_TP;
		break;
	case MEDIA_TYPE_1000M_FULL:
		ecmd->advertising =
		    ADVERTISED_1000baseT_Full |
		    ADVERTISED_Autoneg | ADVERTISED_TP;
		break;
	default:
		ecmd->advertising = 0;
		break;
	}
	if (atl1_phy_setup_autoneg_adv(hw)) {
		ret_val = -EINVAL;
		if (netif_msg_link(adapter))
			dev_warn(&adapter->pdev->dev,
				"invalid ethtool speed/duplex setting\n");
		goto exit_sset;
	}
3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL)
		phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
	else {
		switch (hw->media_type) {
		case MEDIA_TYPE_100M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
			    MII_CR_RESET;
			break;
		case MEDIA_TYPE_100M_HALF:
			phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
			break;
		case MEDIA_TYPE_10M_FULL:
			phy_data =
			    MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
			break;
		default:
			/* MEDIA_TYPE_10M_HALF: */
			phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			break;
		}
	}
J
Jay Cliburn 已提交
3339 3340 3341 3342
	atl1_write_phy_reg(hw, MII_BMCR, phy_data);
exit_sset:
	if (ret_val)
		hw->media_type = old_media_type;
3343

J
Jay Cliburn 已提交
3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356
	if (netif_running(adapter->netdev)) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool starting adapter\n");
		atl1_up(adapter);
	} else if (!ret_val) {
		if (netif_msg_link(adapter))
			dev_dbg(&adapter->pdev->dev,
				"ethtool resetting adapter\n");
		atl1_reset(adapter);
	}
	return ret_val;
}
3357

J
Jay Cliburn 已提交
3358 3359 3360 3361
static void atl1_get_drvinfo(struct net_device *netdev,
	struct ethtool_drvinfo *drvinfo)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
3362

3363 3364
	strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
	strlcpy(drvinfo->version, ATLX_DRIVER_VERSION,
J
Jay Cliburn 已提交
3365
		sizeof(drvinfo->version));
3366 3367
	strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
	strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
J
Jay Cliburn 已提交
3368 3369 3370 3371 3372 3373 3374 3375 3376
		sizeof(drvinfo->bus_info));
	drvinfo->eedump_len = ATL1_EEDUMP_LEN;
}

static void atl1_get_wol(struct net_device *netdev,
	struct ethtool_wolinfo *wol)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

3377
	wol->supported = WAKE_MAGIC;
J
Jay Cliburn 已提交
3378 3379 3380 3381 3382 3383 3384 3385 3386 3387
	wol->wolopts = 0;
	if (adapter->wol & ATLX_WUFC_MAG)
		wol->wolopts |= WAKE_MAGIC;
}

static int atl1_set_wol(struct net_device *netdev,
	struct ethtool_wolinfo *wol)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);

3388 3389
	if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
		WAKE_ARP | WAKE_MAGICSECURE))
J
Jay Cliburn 已提交
3390 3391 3392 3393
		return -EOPNOTSUPP;
	adapter->wol = 0;
	if (wol->wolopts & WAKE_MAGIC)
		adapter->wol |= ATLX_WUFC_MAG;
3394 3395 3396

	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);

3397 3398 3399
	return 0;
}

J
Jay Cliburn 已提交
3400
static u32 atl1_get_msglevel(struct net_device *netdev)
3401
{
J
Jay Cliburn 已提交
3402 3403 3404
	struct atl1_adapter *adapter = netdev_priv(netdev);
	return adapter->msg_enable;
}
3405

J
Jay Cliburn 已提交
3406 3407 3408 3409 3410
static void atl1_set_msglevel(struct net_device *netdev, u32 value)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	adapter->msg_enable = value;
}
3411

J
Jay Cliburn 已提交
3412 3413 3414 3415
static int atl1_get_regs_len(struct net_device *netdev)
{
	return ATL1_REG_COUNT * sizeof(u32);
}
3416

J
Jay Cliburn 已提交
3417 3418 3419 3420 3421 3422 3423
static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
	void *p)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
	unsigned int i;
	u32 *regbuf = p;
3424

J
Jay Cliburn 已提交
3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461
	for (i = 0; i < ATL1_REG_COUNT; i++) {
		/*
		 * This switch statement avoids reserved regions
		 * of register space.
		 */
		switch (i) {
		case 6 ... 9:
		case 14:
		case 29 ... 31:
		case 34 ... 63:
		case 75 ... 127:
		case 136 ... 1023:
		case 1027 ... 1087:
		case 1091 ... 1151:
		case 1194 ... 1195:
		case 1200 ... 1201:
		case 1206 ... 1213:
		case 1216 ... 1279:
		case 1290 ... 1311:
		case 1323 ... 1343:
		case 1358 ... 1359:
		case 1368 ... 1375:
		case 1378 ... 1383:
		case 1388 ... 1391:
		case 1393 ... 1395:
		case 1402 ... 1403:
		case 1410 ... 1471:
		case 1522 ... 1535:
			/* reserved region; don't read it */
			regbuf[i] = 0;
			break;
		default:
			/* unreserved region */
			regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
		}
	}
}
3462

J
Jay Cliburn 已提交
3463 3464 3465 3466 3467 3468
static void atl1_get_ringparam(struct net_device *netdev,
	struct ethtool_ringparam *ring)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
	struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;
3469

J
Jay Cliburn 已提交
3470 3471 3472 3473 3474 3475 3476 3477 3478
	ring->rx_max_pending = ATL1_MAX_RFD;
	ring->tx_max_pending = ATL1_MAX_TPD;
	ring->rx_mini_max_pending = 0;
	ring->rx_jumbo_max_pending = 0;
	ring->rx_pending = rxdr->count;
	ring->tx_pending = txdr->count;
	ring->rx_mini_pending = 0;
	ring->rx_jumbo_pending = 0;
}
3479

J
Jay Cliburn 已提交
3480 3481 3482 3483 3484 3485 3486
static int atl1_set_ringparam(struct net_device *netdev,
	struct ethtool_ringparam *ring)
{
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
	struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
	struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;
3487

J
Jay Cliburn 已提交
3488 3489 3490 3491
	struct atl1_tpd_ring tpd_old, tpd_new;
	struct atl1_rfd_ring rfd_old, rfd_new;
	struct atl1_rrd_ring rrd_old, rrd_new;
	struct atl1_ring_header rhdr_old, rhdr_new;
3492 3493
	struct atl1_smb smb;
	struct atl1_cmb cmb;
J
Jay Cliburn 已提交
3494
	int err;
3495

J
Jay Cliburn 已提交
3496 3497 3498 3499
	tpd_old = adapter->tpd_ring;
	rfd_old = adapter->rfd_ring;
	rrd_old = adapter->rrd_ring;
	rhdr_old = adapter->ring_header;
3500

J
Jay Cliburn 已提交
3501 3502
	if (netif_running(adapter->netdev))
		atl1_down(adapter);
3503

J
Jay Cliburn 已提交
3504 3505 3506 3507 3508
	rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
	rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
			rfdr->count;
	rfdr->count = (rfdr->count + 3) & ~3;
	rrdr->count = rfdr->count;
3509

J
Jay Cliburn 已提交
3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524
	tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
	tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
			tpdr->count;
	tpdr->count = (tpdr->count + 3) & ~3;

	if (netif_running(adapter->netdev)) {
		/* try to get new resources before deleting old */
		err = atl1_setup_ring_resources(adapter);
		if (err)
			goto err_setup_ring;

		/*
		 * save the new, restore the old in order to free it,
		 * then restore the new back again
		 */
3525

J
Jay Cliburn 已提交
3526 3527 3528 3529 3530 3531 3532 3533
		rfd_new = adapter->rfd_ring;
		rrd_new = adapter->rrd_ring;
		tpd_new = adapter->tpd_ring;
		rhdr_new = adapter->ring_header;
		adapter->rfd_ring = rfd_old;
		adapter->rrd_ring = rrd_old;
		adapter->tpd_ring = tpd_old;
		adapter->ring_header = rhdr_old;
3534 3535 3536 3537 3538 3539
		/*
		 * Save SMB and CMB, since atl1_free_ring_resources
		 * will clear them.
		 */
		smb = adapter->smb;
		cmb = adapter->cmb;
J
Jay Cliburn 已提交
3540 3541 3542 3543 3544
		atl1_free_ring_resources(adapter);
		adapter->rfd_ring = rfd_new;
		adapter->rrd_ring = rrd_new;
		adapter->tpd_ring = tpd_new;
		adapter->ring_header = rhdr_new;
3545 3546
		adapter->smb = smb;
		adapter->cmb = cmb;
3547

J
Jay Cliburn 已提交
3548 3549 3550 3551
		err = atl1_up(adapter);
		if (err)
			return err;
	}
3552
	return 0;
J
Jay Cliburn 已提交
3553 3554 3555 3556 3557 3558 3559 3560

err_setup_ring:
	adapter->rfd_ring = rfd_old;
	adapter->rrd_ring = rrd_old;
	adapter->tpd_ring = tpd_old;
	adapter->ring_header = rhdr_old;
	atl1_up(adapter);
	return err;
3561 3562
}

J
Jay Cliburn 已提交
3563 3564
static void atl1_get_pauseparam(struct net_device *netdev,
	struct ethtool_pauseparam *epause)
3565
{
J
Jay Cliburn 已提交
3566 3567
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3568

J
Jay Cliburn 已提交
3569 3570 3571 3572 3573
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		epause->autoneg = AUTONEG_ENABLE;
	} else {
		epause->autoneg = AUTONEG_DISABLE;
3574
	}
J
Jay Cliburn 已提交
3575 3576
	epause->rx_pause = 1;
	epause->tx_pause = 1;
3577 3578
}

J
Jay Cliburn 已提交
3579 3580
static int atl1_set_pauseparam(struct net_device *netdev,
	struct ethtool_pauseparam *epause)
3581
{
J
Jay Cliburn 已提交
3582 3583
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3584

J
Jay Cliburn 已提交
3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595
	if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
	    hw->media_type == MEDIA_TYPE_1000M_FULL) {
		epause->autoneg = AUTONEG_ENABLE;
	} else {
		epause->autoneg = AUTONEG_DISABLE;
	}

	epause->rx_pause = 1;
	epause->tx_pause = 1;

	return 0;
3596 3597
}

J
Jay Cliburn 已提交
3598 3599
/* FIXME: is this right? -- CHS */
static u32 atl1_get_rx_csum(struct net_device *netdev)
3600
{
J
Jay Cliburn 已提交
3601 3602
	return 1;
}
3603

J
Jay Cliburn 已提交
3604 3605 3606 3607 3608
static void atl1_get_strings(struct net_device *netdev, u32 stringset,
	u8 *data)
{
	u8 *p = data;
	int i;
3609

J
Jay Cliburn 已提交
3610 3611 3612 3613 3614 3615 3616 3617
	switch (stringset) {
	case ETH_SS_STATS:
		for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
			memcpy(p, atl1_gstrings_stats[i].stat_string,
				ETH_GSTRING_LEN);
			p += ETH_GSTRING_LEN;
		}
		break;
3618 3619 3620
	}
}

J
Jay Cliburn 已提交
3621
static int atl1_nway_reset(struct net_device *netdev)
3622
{
J
Jay Cliburn 已提交
3623 3624
	struct atl1_adapter *adapter = netdev_priv(netdev);
	struct atl1_hw *hw = &adapter->hw;
3625

J
Jay Cliburn 已提交
3626 3627 3628
	if (netif_running(netdev)) {
		u16 phy_data;
		atl1_down(adapter);
3629

J
Jay Cliburn 已提交
3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652
		if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
			hw->media_type == MEDIA_TYPE_1000M_FULL) {
			phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
		} else {
			switch (hw->media_type) {
			case MEDIA_TYPE_100M_FULL:
				phy_data = MII_CR_FULL_DUPLEX |
					MII_CR_SPEED_100 | MII_CR_RESET;
				break;
			case MEDIA_TYPE_100M_HALF:
				phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
				break;
			case MEDIA_TYPE_10M_FULL:
				phy_data = MII_CR_FULL_DUPLEX |
					MII_CR_SPEED_10 | MII_CR_RESET;
				break;
			default:
				/* MEDIA_TYPE_10M_HALF */
				phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
			}
		}
		atl1_write_phy_reg(hw, MII_BMCR, phy_data);
		atl1_up(adapter);
3653 3654 3655 3656
	}
	return 0;
}

3657
static const struct ethtool_ops atl1_ethtool_ops = {
J
Jay Cliburn 已提交
3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680
	.get_settings		= atl1_get_settings,
	.set_settings		= atl1_set_settings,
	.get_drvinfo		= atl1_get_drvinfo,
	.get_wol		= atl1_get_wol,
	.set_wol		= atl1_set_wol,
	.get_msglevel		= atl1_get_msglevel,
	.set_msglevel		= atl1_set_msglevel,
	.get_regs_len		= atl1_get_regs_len,
	.get_regs		= atl1_get_regs,
	.get_ringparam		= atl1_get_ringparam,
	.set_ringparam		= atl1_set_ringparam,
	.get_pauseparam		= atl1_get_pauseparam,
	.set_pauseparam		= atl1_set_pauseparam,
	.get_rx_csum		= atl1_get_rx_csum,
	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
	.get_link		= ethtool_op_get_link,
	.set_sg			= ethtool_op_set_sg,
	.get_strings		= atl1_get_strings,
	.nway_reset		= atl1_nway_reset,
	.get_ethtool_stats	= atl1_get_ethtool_stats,
	.get_sset_count		= atl1_get_sset_count,
	.set_tso		= ethtool_op_set_tso,
};